[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 DHCP client bound to address 192.168.101.212 (3847 ms) U-Boot> setenv serverip 192.168.101.1 setenv serverip 192.168.101.1 U-Boot> tftp 0x01000000 7550105/tftp-deploy-acnhq_gg/kernel/zImage tftp 0x01000000 7550105/tftp-deploy-acnhq_gg/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.212 Filename '7550105/tftp-deploy-acnhq_gg/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### 970.7 KiB/s done Bytes transferred = 5791352 (585e78 hex) U-Boot> tftp 0x02200000 7550105/tftp-deploy-acnhq_gg/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 7550105/tftp-deploy-acnhq_gg/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.212 Filename '7550105/tftp-deploy-acnhq_gg/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 1010.7 KiB/s done Bytes transferred = 9241603 (8d0403 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 7550105/tftp-deploy-acnhq_gg/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 7550105/tftp-deploy-acnhq_gg/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.212 Filename '7550105/tftp-deploy-acnhq_gg/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 835 KiB/s done Bytes transferred = 13687 (3577 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x585e78 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9241539 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006676 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.145-cip17 (KernelCI@build-j292234-arm-gcc-10-bcm2835-defconfig-gdmnk) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Tue Oct 11 09:42:42 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:148 arm_dt_init_cpu_maps+0x1b8/0x200 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.145-cip17 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] Backtrace: [ 0.000000] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 0.000000] r7:c0e01edc r6:00000000 r5:00000009 r4:c0bbc4c4 [ 0.000000] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 0.000000] [] (dump_stack) from [] (__warn+0xcc/0xf8) [ 0.000000] r5:00000009 r4:c0b3362c [ 0.000000] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) [ 0.000000] r9:c0f75408 r8:c0b336a5 r7:00000009 r6:c0d04d08 r5:00000094 r4:c0b3362c [ 0.000000] [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x1b8/0x200) [ 0.000000] r8:c0b335d9 r7:00000000 r6:ff000000 r5:00000000 r4:eb9d96c4 [ 0.000000] [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x26c/0x644) [ 0.000000] r10:c0e01f70 r9:c0e01f68 r8:ebffff00 r7:c0bca0c8 r6:2fffffff r5:c0e08730 [ 0.000000] r4:c0d33ef4 [ 0.000000] [] (setup_arch) from [] (start_kernel+0x64/0x520) [ 0.000000] r10:10c53c7d r9:410fc075 r8:00000100 r7:c0f8f03c r6:c0e04240 r5:00000051 [ 0.000000] r4:c0d004b0 [ 0.000000] [] (start_kernel) from [<00000000>] (0x0) [ 0.000000] r9:410fc075 r8:00000100 r7:00000000 r6:10c03c7d r5:00000051 r4:c0d004b0 [ 0.000000] ---[ end trace 58996bc4bee07162 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/de# v/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689080K/786432K available (8192K kernel code, 1593K rwdata, 3244K rodata, 1024K init, 711K bss, 31816K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 32616 entries in 96 pages <6>[ 0.000000] ftrace: allocated 96 pages with 2 groups <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000017] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008819] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018639] bcm2835: system timer (irq = 27) <6>[ 0.023768] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030258] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041528] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049955] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056755] Console: colour dummy device 80x30 <6>[ 0.061617] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072464] pid_max: default: 32768 minimum: 301 <6>[ 0.077804] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.085558] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.094753] CPU: Testing write buffer coherency: ok <6>[ 0.101086] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.109316] devtmpfs: initialized <6>[ 0.118907] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.127302] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.137623] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.148067] pinctrl core: initialized pinctrl subsystem <6>[ 0.155649] NET: Registered protocol family 16 <6>[ 0.162552] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.173087] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.173563] No ATAGs? <6>[ 0.182602] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.191026] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.197573] Serial: AMBA PL011 UART driver <6>[ 0.222349] Kprobes globally optimized <5>[ 0.231709] SCSI subsystem initialized <6>[ 0.236112] usbcore: registered new interface driver usbfs <6>[ 0.242107] usbcore: registered new interface driver hub <6>[ 0.247842] usbcore: registered new device driver usb <4>[ 0.253513] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.261144] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.269404] mc: Linux media interface: v0.10 <6>[ 0.274067] videodev: Linux video capture interface: v2.00 <6>[ 0.280206] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.287418] Bluetooth: Core ver 2.22 <6>[ 0.291433] NET: Registered protocol family 31 <6>[ 0.296228] Bluetooth: HCI device and connection manager initialized <6>[ 0.302992] Bluetooth: HCI socket layer initialized <6>[ 0.308234] Bluetooth: L2CAP socket layer initialized <6>[ 0.313677] Bluetooth: SCO socket layer initialized <6>[ 0.319465] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.566006] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes, mapped to 0x(ptrval) <6>[ 0.577003] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 0.590414] Console: switching to colour frame buffer device 82x26 <6>[ 0.600004] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 0.617464] NET: Registered protocol family 2 <6>[ 0.622732] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.632130] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.641021] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.649259] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.656898] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.663891] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.670854] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.678414] NET: Registered protocol family 1 <6>[ 0.683886] RPC: Registered named UNIX socket transport module. <6>[ 0.690228] RPC: Registered udp transport module. <6>[ 0.695286] RPC: Registered tcp transport module. <6>[ 0.700356] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.709126] Unpacking initramfs... <6>[ 1.501427] Freeing initrd memory: 9028K <6>[ 1.506854] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.516962] Initialise system trusted keyrings <6>[ 1.522188] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.539295] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <5>[ 1.666770] Key type asymmetric registered <5>[ 1.671386] Asymmetric key parser 'x509' registered <6>[ 1.676700] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>[ 1.684527] io scheduler mq-deadline registered <6>[ 1.689409] io scheduler kyber registered <6>[ 1.702169] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.714322] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.725565] usbcore: registered new interface driver zd1211rw <6>[ 1.731854] usbcore: registered new interface driver lan78xx <6>[ 1.737950] usbcore: registered new interface driver asix <6>[ 1.743802] usbcore: registered new interface driver ax88179_178a <6>[ 1.750339] usbcore: registered new interface driver cdc_ether <6>[ 1.756623] usbcore: registered new interface driver smsc95xx <6>[ 1.762807] usbcore: registered new interface driver net1080 <6>[ 1.768885] usbcore: registered new interface driver cdc_subset <6>[ 1.775289] usbcore: registered new interface driver zaurus <6>[ 1.781341] usbcore: registered new interface driver cdc_ncm <6>[ 1.788025] usbcore: registered new interface driver usb-storage <6>[ 1.794620] i2c /dev entries driver <4>[ 1.800939] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.810553] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.817712] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.824311] sdhci: Copyright(c) Pierre Ossman <6>[ 1.829285] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.836745] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.843761] usbcore: registered new interface driver usbhid <6>[ 1.849733] usbhid: USB HID core driver <6>[ 1.854074] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.862048] NET: Registered protocol family 10 <6>[ 1.868201] Segment Routing with IPv6 <6>[ 1.872416] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.879616] NET: Registered protocol family 17 <6>[ 1.884979] oprofile: using timer interrupt. <5>[ 1.890000] Loading compiled-in X.509 certificates <6>[ 1.901513] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.911663] printk: console [ttyAMA0] enabled <6>[ 1.911663] printk: console [ttyAMA0] enabled <6>[ 1.921009] printk: bootconsole [pl11] disabled <6>[ 1.921009] printk: bootconsole [pl11] disabled <6>[ 1.934038] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <6>[ 1.942810] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 1.952244] ------------[ cut here ]------------ <4>[ 1.957158] WARNING: CPU: 0 PID: 46 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xf8/0x2f0 <4>[ 1.966409] Modules linked in: <4>[ 1.969751] CPU: 0 PID: 46 Comm: kworker/0:3 Tainted: G W 5.10.145-cip17 #1 <4>[ 1.978260] Hardware name: BCM2835 <4>[ 1.981945] Workqueue: events deferred_probe_work_func <4>[ 1.987338] Backtrace: <4>[ 1.990088] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 1.997910] r7:00000000 r6:00000000 r5:00000009 r4:c0bbc4c4 <4>[ 2.003845] [] (show_stack) from [] (dump_stack+0x28/0x30) <4>[ 2.011344] [] (dump_stack) from [] (__warn+0xcc/0xf8) <4>[ 2.018469] r5:00000009 r4:c0ba505b <4>[ 2.022320] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) <4>[ 2.030069] r9:c46e6bc8 r8:00000000 r7:00000009 r6:c06293a4 r5:0000004f r4:c0ba505b <4>[ 2.038070] [] (warn_slowpath_fmt) from [] (dt_cpufreq_probe+0xf8/0x2f0) <4>[ 2.046770] r8:00000000 r7:c46e7a10 r6:c46e6bc0 r5:c0e08860 r4:00000000 <4>[ 2.053755] [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.062465] r10:00000004 r9:c1031744 r8:00000000 r7:c103173c r6:c0f35814 r5:c46e7a10 <4>[ 2.070553] r4:00000000 <4>[ 2.073354] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.081880] r7:c103173c r6:c0f35814 r5:00000000 r4:c46e7a10 <4>[ 2.087800] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.096416] r10:00000004 r9:00000000 r8:c0f24f38 r7:c46e7a10 r6:c46c77fc r5:c0f35814 <4>[ 2.104503] r4:c46e7a10 <4>[ 2.107302] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.116629] r9:00000000 r8:c0f24f38 r7:c46e7a10 r6:c46c77fc r5:c0f35814 r4:00000001 <4>[ 2.124640] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.133687] r7:c46e7a54 r6:c0518e88 r5:c46c77fc r4:00000000 <4>[ 2.139617] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.148130] r6:c46e7a10 r5:00000001 r4:c46e7a10 <4>[ 2.153020] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.161821] r7:00000000 r6:c46e7a10 r5:c0f24ee0 r4:c46e7a10 <4>[ 2.167741] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.176624] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.184805] r7:00000000 r6:c0f24bd8 r5:00000000 r4:c46e7a10 <4>[ 2.190737] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.199167] r9:c0e0b378 r8:c0e0b358 r7:05f5e100 r6:00000000 r5:00000000 r4:c46e7a00 <4>[ 2.207180] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.217182] r9:05f5e0ff r8:2faf0800 r7:05f5e100 r6:c46c78e0 r5:00000000 r4:c46e7a00 <4>[ 2.225195] [] (platform_device_register_full) from [] (raspberrypi_cpufreq_probe+0x10c/0x198) <4>[ 2.235802] r7:05f5e100 r6:c0e08860 r5:00000000 r4:00000000 <4>[ 2.241737] [] (raspberrypi_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.251220] r9:c1031744 r8:00000000 r7:c103173c r6:c0f3590c r5:c46e7610 r4:00000000 <4>[ 2.259221] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.267749] r7:c103173c r6:c0f3590c r5:00000000 r4:c46e7610 <4>[ 2.273680] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.282307] r10:c46e6340 r9:00000000 r8:c46e7410 r7:c46e7610 r6:c46c7a2c r5:c0f3590c <4>[ 2.290394] r4:c46e7610 <4>[ 2.293194] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.302503] r9:00000000 r8:c46e7410 r7:c46e7610 r6:c46c7a2c r5:c0f3590c r4:00000001 <4>[ 2.310513] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.319559] r7:c46e7654 r6:c0518e88 r5:c46c7a2c r4:00000000 <4>[ 2.325478] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.334002] r6:c46e7610 r5:00000001 r4:c46e7610 <4>[ 2.338881] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.347667] r7:00000000 r6:c46e7610 r5:c0f24ee0 r4:c46e7610 <4>[ 2.353598] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.362474] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.370653] r7:00000000 r6:c0f24bd8 r5:00000000 r4:c46e7610 <4>[ 2.376572] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.385013] r9:c0e0b378 r8:c0e0b358 r7:00000000 r6:00000000 r5:00000000 r4:c46e7600 <4>[ 2.393030] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.403034] r9:c46e7410 r8:c46e1150 r7:00000000 r6:c46c7b18 r5:00000000 r4:c46e7600 <4>[ 2.411049] [] (platform_device_register_full) from [] (raspberrypi_clk_probe+0x160/0x31c) <4>[ 2.421308] r7:00000000 r6:00000000 r5:c46e62c0 r4:00000000 <4>[ 2.427228] [] (raspberrypi_clk_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.436364] r10:00000004 r9:c1031744 r8:00000000 r7:c103173c r6:c0f1f0dc r5:c46e7410 <4>[ 2.444450] r4:00000000 <4>[ 2.447250] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.455776] r7:c103173c r6:c0f1f0dc r5:00000000 r4:c46e7410 <4>[ 2.461706] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.470326] r10:00000003 r9:00000000 r8:c1594c10 r7:c46e7410 r6:c46c7c6c r5:c0f1f0dc <4>[ 2.478402] r4:c46e7410 <4>[ 2.481213] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.490521] r9:00000000 r8:c1594c10 r7:c46e7410 r6:c46c7c6c r5:c0f1f0dc r4:00000001 <4>[ 2.498520] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.507571] r7:c46e7454 r6:c0518e88 r5:c46c7c6c r4:00000000 <4>[ 2.513502] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.522027] r6:c46e7410 r5:00000001 r4:c46e7410 <4>[ 2.526906] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.535692] r7:00000000 r6:c46e7410 r5:c0f24ee0 r4:c46e7410 <4>[ 2.541622] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.550500] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.558668] r7:00000000 r6:c0f24bd8 r5:00000000 r4:c46e7410 <4>[ 2.564597] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.573039] r9:c0e0b378 r8:c0e0b358 r7:c1594c00 r6:00000000 r5:00000000 r4:c46e7400 <4>[ 2.581052] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.591054] r9:c1031744 r8:00000001 r7:c1594c00 r6:c46c7d58 r5:00000000 r4:c46e7400 <4>[ 2.599056] [] (platform_device_register_full) from [] (rpi_firmware_probe+0x19c/0x1e4) <4>[ 2.609055] r7:c1594c00 r6:c1594c10 r5:c46e52c0 r4:00000000 <4>[ 2.614990] [] (rpi_firmware_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.623865] r8:00000000 r7:c103173c r6:c0f3722c r5:c1594c10 r4:00000000 <4>[ 2.630837] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.639352] r7:c103173c r6:c0f3722c r5:00000000 r4:c1594c10 <4>[ 2.645282] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.653898] r10:c0f24e34 r9:00000000 r8:00000000 r7:c1594c10 r6:c46c7ea4 r5:c0f3722c <4>[ 2.661985] r4:c1594c10 <4>[ 2.664785] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.674093] r9:00000000 r8:00000000 r7:c1594c10 r6:c46c7ea4 r5:c0f3722c r4:00000001 <4>[ 2.682106] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.691153] r7:c1594c54 r6:c0518e88 r5:c46c7ea4 r4:00000000 <4>[ 2.697072] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.705597] r6:c1594c10 r5:00000001 r4:c1594c10 <4>[ 2.710487] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.719262] r7:eb9c7300 r6:c1594c10 r5:c0f24ee0 r4:c1594c10 <4>[ 2.725196] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.734074] [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xcc) <4>[ 2.743294] r7:eb9c7300 r6:c0f24e58 r5:c0f24e1c r4:c1594c10 <4>[ 2.749215] [] (deferred_probe_work_func) from [] (process_one_work+0x194/0x274) <4>[ 2.758607] r7:eb9c7300 r6:c0e0d0d0 r5:c0f24e30 r4:c46b0c80 <4>[ 2.764537] [] (process_one_work) from [] (worker_thread+0x220/0x2e4) <4>[ 2.772980] r10:c46b40a0 r9:c0f8fab0 r8:c0e0d0e4 r7:c0edca20 r6:c0e0d0d0 r5:c46b0c94 <4>[ 2.781066] r4:c46b0c80 <4>[ 2.783869] [] (worker_thread) from [] (kthread+0x11c/0x128) <4>[ 2.791531] r9:c1531e98 r8:c46b0c80 r7:c0134970 r6:c46c6000 r5:c159f100 r4:c46b4080 <4>[ 2.799543] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 2.807014] Exception stack(0xc46c7fb0 to 0xc46c7ff8) <4>[ 2.812332] 7fa0: 00000000 00000000 00000000 00000000 <4>[ 2.820777] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.829205] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.836091] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0139418 <4>[ 2.844180] r4:c159f100 r3:00000001 <4>[ 2.848011] ---[ end trace 58996bc4bee07164 ]--- <4>[ 2.855105] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.862752] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator # <6>[ 2.923176] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.928182] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <4>[ 2.935531] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 2.943967] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.949744] mmc0: new high speed SDHC card at address 0002 <6>[ 2.956980] hub 1-0:1.0: USB hub found <6>[ 2.961584] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 2.966410] hub 1-0:1.0: 1 port detected <4>[ 2.972478] vc4_hdmi 3f902000.hdmi: deferred probe timeout, ignoring dependency <4>[ 2.980103] vc4_hdmi: probe of 3f902000.hdmi failed with error -110 <4>[ 2.986814] vc4_vec 3f806000.vec: deferred probe timeout, ignoring dependency <4>[ 2.994240] vc4_vec: probe of 3f806000.vec failed with error -110 <4>[ 3.000799] vc4_v3d 3fc00000.v3d: deferred probe timeout, ignoring dependency <4>[ 3.008196] vc4_v3d: probe of 3fc00000.v3d failed with error -110 <4>[ 3.015490] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <6>[ 3.025366] mmcblk0: p1 <6>[ 3.349491] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.600551] hub 1-1:1.0: USB hub found <6>[ 3.604674] hub 1-1:1.0: 5 ports detected <6>[ 3.929492] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 4.062778] smsc95xx v2.0.0 <6>[ 4.213078] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 4.225508] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.293755] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 4.317184] smsc95xx 1-1.1:1.0 eth0: Link is Down <6>[ 4.329502] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.465695] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.473283] scsi host0: usb-storage 1-1.3:1.0 <5>[ 5.619033] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.846153] random: crng init done <6>[ 6.422386] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 6.430305] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 6.459668] Sending DHCP requests ., <5>[ 6.559341] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <4>[ 6.571017] OK <6>[ 6.573057] IP-Config: Got DHCP answer from 192.168.101.1, my address is 192.168.101.212 <6>[ 6.581430] IP-Config: Complete: <6>[ 6.584947] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.101.212, mask=255.255.255.0, gw=192.168.101.1 <6>[ 6.595751] host=192.168.101.212, domain=lava.cbg.collabora.co.uk, nis-domain=(none) <6>[ 6.604206] bootserver=192.168.101.1, rootserver=192.168.101.1, rootpath= <6>[ 6.604213] nameserver0=192.168.101.1 <5>[ 6.616585] sd 0:0:0:0: [sda] Write Protect is off <5>[ 6.621908] cfg80211: Loading compiled-in X.509 certificates for regulatory database <3>[ 6.630615] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 6.636213] sd 0:0:0:0: [sda] Assuming drive cache: write through <5>[ 6.667538] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 6.674880] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 6.684657] ALSA device list: <6>[ 6.687949] cfg80211: failed to load regulatory.db <6>[ 6.693298] No soundcards found. <6>[ 6.697375] uart-pl011 3f201000.serial: no DMA platform data <6>[ 6.712882] sda: sda1 sda2 <5>[ 6.720094] sd 0:0:0:0: [sda] Attached SCSI removable disk <6>[ 6.732728] Freeing unused kernel memory: 1024K <6>[ 6.737831] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 6.969194] udevd[93]: starting version 3.2.9 <27>[ 6.988283] udevd[93]: specified user 'tss' unknown <27>[ 6.993936] udevd[93]: specified group 'tss' unknown <30>[ 7.005018] udevd[94]: starting eudev-3.2.9 <4>[ 7.355036] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 7.431022] bcm2835-rng 3f104000.rng: hwrng registered <3>[ 7.473098] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 7.479912] vchiq: could not load vchiq done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-7550105/environment . /lava-7550105/environment / # /lava-7550105/bin/lava-test-runner /lava-7550105/0 /lava-7550105/bin/lava-test-runner /lava-7550105/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-7550105/0/tests/0_dmesg + cat uuid + UUID=7550105_1.5.2<8>[ 8.790440] .4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 8.855212] <8>[ 8.915348] <8>[ 8.975517] + set +x <8>[ 8.986584] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-7550105/environment / # . /lava-7550105/environment/lava-7550105/bin/lava-test-runner /lava-7550105/1 / # /lava-7550105/bin/lava-test-runner /lava-7550105/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-7550105/1/tests/1_bootrr + cat uuid + UUID=7550105_1.5.2.4<8>[ 9.510230] .5 + set +x + export 'PATH=/opt/bootrr/helpers:/lava-7550105/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-7550105/1/../bin/lava-test-case <8>[ 10.571073] /lava-7550105/1/../bin/lava-test-case <8>[ 10.626183] /lava-7550105/1/../bin/lava-test-case <8>[ 10.659049] + set +x <8>[ 10.684263] / #