[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.101.215 (880 ms) U-Boot> setenv serverip 192.168.101.1 setenv serverip 192.168.101.1 U-Boot> tftp 0x01000000 8853857/tftp-deploy-02rmf_mc/kernel/zImage tftp 0x01000000 8853857/tftp-deploy-02rmf_mc/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.215 Filename '8853857/tftp-deploy-02rmf_mc/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### 536.1 KiB/s done Bytes transferred = 5804216 (5890b8 hex) U-Boot> tftp 0x02200000 8853857/tftp-deploy-02rmf_mc/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 8853857/tftp-deploy-02rmf_mc/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.215 Filename '8853857/tftp-deploy-02rmf_mc/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 1 MiB/s done Bytes transferred = 9249974 (8d24b6 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 8853857/tftp-deploy-02rmf_mc/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 8853857/tftp-deploy-02rmf_mc/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.215 Filename '8853857/tftp-deploy-02rmf_mc/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 835 KiB/s done Bytes transferred = 13687 (3577 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x5890b8 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9249910 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006676 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.165-cip24 (KernelCI@build-j904037-arm-gcc-10-bcm2835-defconfig-5vj87) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Tue Jan 24 12:14:31 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:148 arm_dt_init_cpu_maps+0x1b8/0x200 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.165-cip24 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] Backtrace: [ 0.000000] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 0.000000] r7:c0e01edc r6:00000000 r5:00000009 r4:c0bbd31f [ 0.000000] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 0.000000] [] (dump_stack) from [] (__warn+0xcc/0xf8) [ 0.000000] r5:00000009 r4:c0b34234 [ 0.000000] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) [ 0.000000] r9:c0f75988 r8:c0b342ad r7:00000009 r6:c0d04d08 r5:00000094 r4:c0b34234 [ 0.000000] [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x1b8/0x200) [ 0.000000] r8:c0b341e1 r7:00000000 r6:ff000000 r5:00000000 r4:eb9d96c4 [ 0.000000] [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x26c/0x644) [ 0.000000] r10:c0e01f70 r9:c0e01f68 r8:ebffff00 r7:c0bcb0c8 r6:2fffffff r5:c0e08738 [ 0.000000] r4:c0d33eec [ 0.000000] [] (setup_arch) from [] (start_kernel+0x64/0x520) [ 0.000000] r10:10c53c7d r9:410fc075 r8:00000100 r7:c0f8f03c r6:c0e04240 r5:00000051 [ 0.000000] r4:c0d004b0 [ 0.000000] [] (start_kernel) from [<00000000>] (0x0) [ 0.000000] r9:410fc075 r8:00000100 r7:00000000 r6:10c03c7d r5:00000051 r4:c0d004b0 [ 0.000000] ---[ end trace 58996bc4bee07162 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689072K/786432K available (8192K kernel code, 1595K rwdata, 3248K rodata, 1024K init, 709K bss, 31824K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 32656 entries in 96 pages <6>[ 0.000000] ftrace: allocated 96 pages with 2 groups <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000018] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008815] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018630] bcm2835: system timer (irq = 27) <6>[ 0.023743] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030236] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041506] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049937] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056733] Console: colour dummy device 80x30 <6>[ 0.061596] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072439] pid_max: default: 32768 minimum: 301 <6>[ 0.077790] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.085542] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.094741] CPU: Testing write buffer coherency: ok <6>[ 0.101070] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.109288] devtmpfs: initialized <6>[ 0.118961] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.127388] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.137718] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.148265] pinctrl core: initialized pinctrl subsystem <6>[ 0.155873] NET: Registered protocol family 16 <6>[ 0.162771] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.173434] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.173906] No ATAGs? <6>[ 0.182932] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.191357] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.197897] Serial: AMBA PL011 UART driver <6>[ 0.223268] Kprobes globally optimized <5>[ 0.232668] SCSI subsystem initialized <6>[ 0.237076] usbcore: registered new interface driver usbfs <6>[ 0.243072] usbcore: registered new interface driver hub <6>[ 0.248806] usbcore: registered new device driver usb <4>[ 0.254477] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.262124] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.270384] mc: Linux media interface: v0.10 <6>[ 0.275051] videodev: Linux video capture interface: v2.00 <6>[ 0.281191] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.288403] Bluetooth: Core ver 2.22 <6>[ 0.292421] NET: Registered protocol family 31 <6>[ 0.297217] Bluetooth: HCI device and connection manager initialized <6>[ 0.303980] Bluetooth: HCI socket layer initialized <6>[ 0.309223] Bluetooth: L2CAP socket layer initialized <6>[ 0.314666] Bluetooth: SCO socket layer initialized <6>[ 0.320460] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.570883] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes, mapped to 0x(ptrval) <6>[ 0.581849] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 0.595226] Console: switching to colour frame buffer device 82x26 <6>[ 0.604835] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 0.622454] NET: Registered protocol family 2 <6>[ 0.627676] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.637109] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.646006] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.654260] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.661897] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.668878] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.675849] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.683426] NET: Registered protocol family 1 <6>[ 0.688901] RPC: Registered named UNIX socket transport module. <6>[ 0.695247] RPC: Registered udp transport module. <6>[ 0.700304] RPC: Registered tcp transport module. <6>[ 0.705373] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.714171] Unpacking initramfs... <6>[ 1.510425] Freeing initrd memory: 9036K <6>[ 1.515895] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.525970] Initialise system trusted keyrings <6>[ 1.531241] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.548613] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <5>[ 1.672864] Key type asymmetric registered <5>[ 1.677312] Asymmetric key parser 'x509' registered <6>[ 1.682790] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>[ 1.690627] io scheduler mq-deadline registered <6>[ 1.695511] io scheduler kyber registered <6>[ 1.708207] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.720388] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.731771] usbcore: registered new interface driver zd1211rw <6>[ 1.737970] usbcore: registered new interface driver lan78xx <6>[ 1.744130] usbcore: registered new interface driver asix <6>[ 1.749962] usbcore: registered new interface driver ax88179_178a <6>[ 1.756500] usbcore: registered new interface driver cdc_ether <6>[ 1.762804] usbcore: registered new interface driver smsc95xx <6>[ 1.768971] usbcore: registered new interface driver net1080 <6>[ 1.775069] usbcore: registered new interface driver cdc_subset <6>[ 1.781470] usbcore: registered new interface driver zaurus <6>[ 1.787506] usbcore: registered new interface driver cdc_ncm <6>[ 1.794206] usbcore: registered new interface driver usb-storage <6>[ 1.800814] i2c /dev entries driver <4>[ 1.807120] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.816771] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.823966] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.830559] sdhci: Copyright(c) Pierre Ossman <6>[ 1.835545] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.843004] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.849863] usbcore: registered new interface driver usbhid <6>[ 1.855872] usbhid: USB HID core driver <6>[ 1.860262] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.868275] NET: Registered protocol family 10 <6>[ 1.874502] Segment Routing with IPv6 <6>[ 1.878623] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.885875] NET: Registered protocol family 17 <6>[ 1.891276] oprofile: using timer interrupt. <5>[ 1.896261] Loading compiled-in X.509 certificates <6>[ 1.907855] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.917386] printk: console [ttyAMA0] enabled <6>[ 1.917386] printk: console [ttyAMA0] enabled <6>[ 1.926753] printk: bootconsole [pl11] disabled <6>[ 1.926753] printk: bootconsole [pl11] disabled <6>[ 1.940514] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.951882] ------------[ cut here ]------------ <4>[ 1.956793] WARNING: CPU: 0 PID: 46 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xf8/0x2f0 <4>[ 1.966030] Modules linked in: <4>[ 1.969356] CPU: 0 PID: 46 Comm: kworker/0:3 Tainted: G W 5.10.165-cip24 #1 <4>[ 1.977877] Hardware name: BCM2835 <4>[ 1.981565] Workqueue: events deferred_probe_work_func <4>[ 1.986958] Backtrace: <4>[ 1.989687] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 1.997521] r7:00000000 r6:00000000 r5:00000009 r4:c0bbd31f <4>[ 2.003456] [] (show_stack) from [] (dump_stack+0x28/0x30) <4>[ 2.010953] [] (dump_stack) from [] (__warn+0xcc/0xf8) <4>[ 2.018078] r5:00000009 r4:c0ba5eb6 <4>[ 2.021929] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) <4>[ 2.029666] r9:c46febc8 r8:00000000 r7:00000009 r6:c062d35c r5:0000004f r4:c0ba5eb6 <4>[ 2.037678] [] (warn_slowpath_fmt) from [] (dt_cpufreq_probe+0xf8/0x2f0) <4>[ 2.046378] r8:00000000 r7:c46ffa10 r6:c46febc0 r5:c0e08868 r4:00000000 <4>[ 2.053349] [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.062070] r10:00000003 r9:c103178c r8:00000000 r7:c1031784 r6:c0f35da4 r5:c46ffa10 <4>[ 2.070146] r4:00000000 <4>[ 2.072956] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.081482] r7:c1031784 r6:c0f35da4 r5:00000000 r4:c46ffa10 <4>[ 2.087402] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.096016] r10:00000003 r9:00000000 r8:c0f254c8 r7:c46ffa10 r6:c46df7fc r5:c0f35da4 <4>[ 2.104102] r4:c46ffa10 <4>[ 2.106902] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.116212] r9:00000000 r8:c0f254c8 r7:c46ffa10 r6:c46df7fc r5:c0f35da4 r4:00000001 <4>[ 2.124223] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.133268] r7:c46ffa54 r6:c051c8a8 r5:c46df7fc r4:00000000 <4>[ 2.139187] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.147709] r6:c46ffa10 r5:00000001 r4:c46ffa10 <4>[ 2.152599] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.161382] r7:00000000 r6:c46ffa10 r5:c0f25470 r4:c46ffa10 <4>[ 2.167301] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.176195] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.184374] r7:00000000 r6:c0f25168 r5:00000000 r4:c46ffa10 <4>[ 2.190292] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.198733] r9:c0e0b380 r8:c0e0b360 r7:05f5e100 r6:00000000 r5:00000000 r4:c46ffa00 <4>[ 2.206741] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.216743] r9:05f5e0ff r8:2faf0800 r7:05f5e100 r6:c46df8e0 r5:00000000 r4:c46ffa00 <4>[ 2.224753] [] (platform_device_register_full) from [] (raspberrypi_cpufreq_probe+0x10c/0x198) <4>[ 2.235357] r7:05f5e100 r6:c0e08868 r5:00000000 r4:00000000 <4>[ 2.241286] [] (raspberrypi_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.250773] r9:c103178c r8:00000000 r7:c1031784 r6:c0f35e9c r5:c46ff610 r4:00000000 <4>[ 2.258771] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.267298] r7:c1031784 r6:c0f35e9c r5:00000000 r4:c46ff610 <4>[ 2.273230] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.281852] r10:c46fe340 r9:00000000 r8:c46ff410 r7:c46ff610 r6:c46dfa2c r5:c0f35e9c <4>[ 2.289928] r4:c46ff610 <4>[ 2.292747] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.302057] r9:00000000 r8:c46ff410 r7:c46ff610 r6:c46dfa2c r5:c0f35e9c r4:00000001 <4>[ 2.310056] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.319102] r7:c46ff654 r6:c051c8a8 r5:c46dfa2c r4:00000000 <4>[ 2.325031] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.333554] r6:c46ff610 r5:00000001 r4:c46ff610 <4>[ 2.338434] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.347218] r7:00000000 r6:c46ff610 r5:c0f25470 r4:c46ff610 <4>[ 2.353147] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.362023] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.370190] r7:00000000 r6:c0f25168 r5:00000000 r4:c46ff610 <4>[ 2.376118] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.384560] r9:c0e0b380 r8:c0e0b360 r7:00000000 r6:00000000 r5:00000000 r4:c46ff600 <4>[ 2.392573] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.402575] r9:c46ff410 r8:c46f9150 r7:00000000 r6:c46dfb18 r5:00000000 r4:c46ff600 <4>[ 2.410590] [] (platform_device_register_full) from [] (raspberrypi_clk_probe+0x160/0x31c) <4>[ 2.420848] r7:00000000 r6:00000000 r5:c46fe2c0 r4:00000000 <4>[ 2.426766] [] (raspberrypi_clk_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.435901] r10:00000003 r9:c103178c r8:00000000 r7:c1031784 r6:c0f1f60c r5:c46ff410 <4>[ 2.443986] r4:00000000 <4>[ 2.446784] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.455309] r7:c1031784 r6:c0f1f60c r5:00000000 r4:c46ff410 <4>[ 2.461238] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.469842] r10:00000003 r9:00000000 r8:c1594c10 r7:c46ff410 r6:c46dfc6c r5:c0f1f60c <4>[ 2.477928] r4:c46ff410 <4>[ 2.480742] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.490040] r9:00000000 r8:c1594c10 r7:c46ff410 r6:c46dfc6c r5:c0f1f60c r4:00000001 <4>[ 2.498050] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.507101] r7:c46ff454 r6:c051c8a8 r5:c46dfc6c r4:00000000 <4>[ 2.513030] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.521554] r6:c46ff410 r5:00000001 r4:c46ff410 <4>[ 2.526433] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.535218] r7:00000000 r6:c46ff410 r5:c0f25470 r4:c46ff410 <4>[ 2.541147] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.550012] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.558190] r7:00000000 r6:c0f25168 r5:00000000 r4:c46ff410 <4>[ 2.564117] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.572559] r9:c0e0b380 r8:c0e0b360 r7:c1594c00 r6:00000000 r5:00000000 r4:c46ff400 <4>[ 2.580567] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.590568] r9:c103178c r8:00000001 r7:c1594c00 r6:c46dfd58 r5:00000000 r4:c46ff400 <4>[ 2.598570] [] (platform_device_register_full) from [] (rpi_firmware_probe+0x1a4/0x1ec) <4>[ 2.608569] r7:c1594c00 r6:c1594c10 r5:c46fd280 r4:00000000 <4>[ 2.614502] [] (rpi_firmware_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.623375] r8:00000000 r7:c1031784 r6:c0f377bc r5:c1594c10 r4:00000000 <4>[ 2.630334] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.638859] r7:c1031784 r6:c0f377bc r5:00000000 r4:c1594c10 <4>[ 2.644788] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.653402] r10:c0f253c4 r9:00000000 r8:00000000 r7:c1594c10 r6:c46dfea4 r5:c0f377bc <4>[ 2.661487] r4:c1594c10 <4>[ 2.664287] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.673594] r9:00000000 r8:00000000 r7:c1594c10 r6:c46dfea4 r5:c0f377bc r4:00000001 <4>[ 2.681603] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.690651] r7:c1594c54 r6:c051c8a8 r5:c46dfea4 r4:00000000 <4>[ 2.696570] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.705094] r6:c1594c10 r5:00000001 r4:c1594c10 <4>[ 2.709974] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.718759] r7:eb9c7300 r6:c1594c10 r5:c0f25470 r4:c1594c10 <4>[ 2.724692] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.733570] [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xcc) <4>[ 2.742789] r7:eb9c7300 r6:c0f253e8 r5:c0f253ac r4:c1594c10 <4>[ 2.748711] [] (deferred_probe_work_func) from [] (process_one_work+0x194/0x274) <4>[ 2.758103] r7:eb9c7300 r6:c0e0d0d8 r5:c0f253c0 r4:c46c8c80 <4>[ 2.764030] [] (process_one_work) from [] (worker_thread+0x220/0x2e4) <4>[ 2.772472] r10:c159f720 r9:c0f8fab0 r8:c0e0d0ec r7:c0edca20 r6:c0e0d0d8 r5:c46c8c94 <4>[ 2.780557] r4:c46c8c80 <4>[ 2.783360] [] (worker_thread) from [] (kthread+0x11c/0x128) <4>[ 2.791021] r9:c1531e98 r8:c46c8c80 r7:c0134b3c r6:c46de000 r5:c159f100 r4:c159f700 <4>[ 2.799021] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 2.806504] Exception stack(0xc46dffb0 to 0xc46dfff8) <4>[ 2.811821] ffa0: 00000000 00000000 00000000 00000000 <4>[ 2.820249] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.828692] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.835577] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0139628 <4>[ 2.843665] r4:c159f100 r3:00000001 <4>[ 2.847495] ---[ end trace 58996bc4bee07164 ]--- <6>[ 2.852410] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 2.861464] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.869107] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.929284] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.934465] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.941960] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.948678] hub 1-0:1.0: USB hub found <6>[ 2.952857] hub 1-0:1.0: 1 port detected <4>[ 2.958798] vc4_hdmi 3f902000.hdmi: deferred probe timeout, ignoring dependency <4>[ 2.966434] vc4_hdmi: probe of 3f902000.hdmi failed with error -110 <4>[ 2.973328] vc4_vec 3f806000.vec: deferred probe timeout, ignoring dependency <4>[ 2.980810] vc4_vec: probe of 3f806000.vec failed with error -110 <4>[ 2.987394] vc4_v3d 3fc00000.v3d: deferred probe timeout, ignoring dependency <4>[ 2.994863] vc4_v3d: probe of 3fc00000.v3d failed with error -110 <4>[ 3.002200] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <4>[ 3.034660] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 3.045246] mmc0: new high speed SDHC card at address 0002 <6>[ 3.052094] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 3.059534] mmcblk0: p1 <6>[ 3.330496] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.581546] hub 1-1:1.0: USB hub found <6>[ 3.585669] hub 1-1:1.0: 5 ports detected <6>[ 3.910488] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 4.043790] smsc95xx v2.0.0 <6>[ 4.184088] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 4.196497] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.300494] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.436823] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.444420] scsi host0: usb-storage 1-1.3:1.0 <6>[ 5.124878] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 5.142068] smsc95xx 1-1.1:1.0 eth0: Link is Down <5>[ 5.539914] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.890516] random: crng init done <5>[ 6.480842] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.489060] sd 0:0:0:0: [sda] Write Protect is off <3>[ 6.494553] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 6.500136] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 6.539368] sda: sda1 sda2 <5>[ 6.546331] sd 0:0:0:0: [sda] Attached SCSI removable disk <6>[ 7.222100] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.230639] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.260691] Sending DHCP requests ., OK <6>[ 7.384600] IP-Config: Got DHCP answer from 192.168.101.1, my address is 192.168.101.215 <6>[ 7.392995] IP-Config: Complete: <6>[ 7.396513] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.101.215, mask=255.255.255.0, gw=192.168.101.1 <6>[ 7.407323] host=192.168.101.215, domain=lava.cbg.collabora.co.uk, nis-domain=(none) <6>[ 7.415782] bootserver=192.168.101.1, rootserver=192.168.101.1, rootpath= <6>[ 7.415789] nameserver0=192.168.101.1 <5>[ 7.427999] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 7.457854] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 7.465165] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 7.474375] ALSA device list: <6>[ 7.477614] No soundcards found. <6>[ 7.481327] cfg80211: failed to load regulatory.db <6>[ 7.486814] uart-pl011 3f201000.serial: no DMA platform data <6>[ 7.499515] Freeing unused kernel memory: 1024K <6>[ 7.505041] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.736767] udevd[93]: starting version 3.2.9 <27>[ 7.755853] udevd[93]: specified user 'tss' unknown <27>[ 7.761504] udevd[93]: specified group 'tss' unknown <30>[ 7.772882] udevd[94]: starting eudev-3.2.9 <4>[ 8.139957] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 8.198829] bcm2835-rng 3f104000.rng: hwrng registered <3>[ 8.280289] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 8.287117] vchiq: could not load vchiq done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-8853857/environment . /lava-8853857/environment / # /lava-8853857/bin/lava-test-runner /lava-8853857/0 /lava-8853857/bin/lava-test-runner /lava-8853857/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-8853857/0/tests/0_dmesg + cat uuid + UUID=8853857_1.5.2<8>[ 9.580196] .4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 9.645960] <8>[ 9.706535] <8>[ 9.766906] + set +x <8>[ 9.777992] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-8853857/environment / # . /lava-8853857/environment/lava-8853857/bin/lava-test-runner /lava-8853857/1 / # /lava-8853857/bin/lava-test-runner /lava-8853857/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-8853857/1/tests/1_bootrr + cat uuid + UUID=8853857_1.5.2<8>[ 10.302351] .4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-8853857/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-8853857/1/../bin/lava-test-case <8>[ 10.378164] /lava-8853857/1/../bin/lava-test-case <8>[ 10.432558] /lava-8853857/1/../bin/lava-test-case <8>[ 10.465287] + set +x <8>[ 10.491186] / #