connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/914714/tftp-deploy-n71jo33x/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/914714/tftp-deploy-n71jo33x/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/914714/tftp-deploy-n71jo33x/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/914714/tftp-deploy-n71jo33x/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/914714/tftp-deploy-n71jo33x/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/914714/tftp-deploy-n71jo33x/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address b6:f9:bc:36:28:04 T eth0: DHCP client bound to address 10.8.254.140 Loading ARM Linux zImage '/mnt/tftp/914714/tftp-deploy-n71jo33x/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x13adf000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/914714/tftp-deploy-n71jo33x/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x1927dec4 Loading devicetree from '/mnt/tftp/914714/tftp-deploy-n71jo33x/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x13adf000, initrd at 0x18000000, oftree at 0x1927e000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.172-cip27 (KernelCI@build-j1120716-arm-gcc-10-multi-v7-defconfig-kselftest-94ncq) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Fri Mar 3 19:26:41 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 21 pages/cpu s55468 r8192 d22356 u86016 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1956928K/2097152K available (17408K kernel code, 2651K rwdata, 8100K rodata, 2048K init, 6691K bss, 74688K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 55428 entries in 163 pages [ 0.000000] ftrace: allocated 163 pages with 4 groups [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000009] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000041] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.004494] Console: colour dummy device 80x30 [ 0.004564] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.004596] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.004626] ... MAX_LOCK_DEPTH: 48 [ 0.004655] ... MAX_LOCKDEP_KEYS: 8192 [ 0.004683] ... CLASSHASH_SIZE: 4096 [ 0.004711] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.004737] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.004764] ... CHAINHASH_SIZE: 32768 [ 0.004791] memory used by lock dependency info: 4061 kB [ 0.004818] memory used for stack traces: 2112 kB [ 0.004846] per task-struct memory footprint: 1536 bytes [ 0.004954] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.005012] pid_max: default: 32768 minimum: 301 [ 0.005414] LSM: Security Framework initializing [ 0.005536] LSM support for eBPF active [ 0.005689] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005742] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.008428] CPU: Testing write buffer coherency: ok [ 0.008571] CPU0: Spectre v2: using BPIALL workaround [ 0.009730] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.013804] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.016377] rcu: Hierarchical SRCU implementation. [ 0.026284] EFI services will not be available. [ 0.027659] smp: Bringing up secondary CPUs ... [ 0.031111] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031127] CPU1: Spectre v2: using BPIALL workaround [ 0.035325] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.035339] CPU2: Spectre v2: using BPIALL workaround [ 0.039119] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.039134] CPU3: Spectre v2: using BPIALL workaround [ 0.040028] smp: Brought up 1 node, 4 CPUs [ 0.040075] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.040112] CPU: All CPU(s) started in SVC mode. [ 0.042998] devtmpfs: initialized [ 0.098316] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.101310] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.101390] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.106418] pinctrl core: initialized pinctrl subsystem [ 0.113756] DMI not present or invalid. [ 0.116165] NET: Registered protocol family 16 [ 0.127575] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.137543] thermal_sys: Registered thermal governor 'step_wise' [ 0.138132] cpuidle: using governor menu [ 0.138654] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.768418] vdd1p1: supplied by regulator-dummy [ 0.800826] vdd3p0: supplied by regulator-dummy [ 0.832844] vdd2p5: supplied by regulator-dummy [ 0.864727] vddarm: supplied by regulator-dummy [ 0.897715] vddpu: supplied by regulator-dummy [ 0.928727] vddsoc: supplied by regulator-dummy [ 2.365552] No ATAGs? [ 2.366199] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 2.366292] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 2.385642] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 2.415379] Serial: AMBA PL011 UART driver [ 2.478594] Kprobes globally optimized [ 2.583179] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.pinctrl; cannot claim for regulator-usbotgvbus [ 2.583236] imx6q-pinctrl 20e0000.pinctrl: pin-42 (regulator-usbotgvbus) status -22 [ 2.583282] imx6q-pinctrl 20e0000.pinctrl: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.pinctrl [ 2.583324] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 2.583449] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 2.595245] iommu: Default domain type: Translated [ 2.597061] vgaarb: loaded [ 2.601934] SCSI subsystem initialized [ 2.604206] usbcore: registered new interface driver usbfs [ 2.604520] usbcore: registered new interface driver hub [ 2.604760] usbcore: registered new device driver usb [ 2.610724] i2c i2c-0: IMX I2C adapter registered [ 2.619658] i2c i2c-1: IMX I2C adapter registered [ 2.625632] i2c i2c-2: IMX I2C adapter registered [ 2.630434] pps_core: LinuxPPS API ver. 1 registered [ 2.630480] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.630586] PTP clock support registered [ 2.648961] clocksource: Switched to clocksource mxc_timer1 [ 4.347452] NET: Registered protocol family 2 [ 4.348224] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 4.351756] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear) [ 4.351950] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 4.352186] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear) [ 4.353641] TCP: Hash tables configured (established 8192 bind 8192) [ 4.354653] MPTCP token hash table entries: 1024 (order: 3, 49152 bytes, linear) [ 4.355007] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 4.355271] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 4.356060] NET: Registered protocol family 1 [ 4.359174] RPC: Registered named UNIX socket transport module. [ 4.359279] RPC: Registered udp transport module. [ 4.359324] RPC: Registered tcp transport module. [ 4.359366] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.359433] NET: Registered protocol family 44 [ 4.359511] PCI: CLS 0 bytes, default 64 [ 4.362242] Trying to unpack rootfs image as initramfs... [ 7.037602] Freeing initrd memory: 18936K [ 7.038792] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 7.040073] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 7.049589] Initialise system trusted keyrings [ 7.050757] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 7.103098] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 7.107719] NFS: Registering the id_resolver key type [ 7.107991] Key type id_resolver registered [ 7.108089] Key type id_legacy registered [ 7.108910] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 7.109031] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 7.109266] ntfs: driver 2.1.32 [Flags: R/O]. [ 7.111535] Key type asymmetric registered [ 7.111681] Asymmetric key parser 'x509' registered [ 7.112112] bounce: pool size: 64 pages [ 7.112284] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 7.112396] io scheduler mq-deadline registered [ 7.112447] io scheduler kyber registered [ 7.113473] test_firmware: interface ready [ 7.287862] mxs-dma 110000.dma-apbh: initialized [ 7.354378] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 7.354664] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 7.616515] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 7.637702] SuperH (H)SCI(F) driver initialized [ 7.640857] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX [ 8.595414] printk: console [ttymxc0] enabled [ 8.605312] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 77, base_baud = 5000000) is a IMX [ 8.620926] msm_serial: driver initialized [ 8.626145] STMicroelectronics ASC driver initialized [ 8.638007] STM32 USART driver initialized [ 8.665968] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 [ 8.734667] brd: module loaded [ 8.797912] loop: module loaded [ 8.804702] lkdtm: No crash points registered, enable through debugfs [ 8.827661] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 8.835744] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 8.843868] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 8.852162] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 8.860228] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 8.868468] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 8.876329] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 8.887783] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 8.894927] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 8.903830] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 8.918325] scsi host0: ahci-imx [ 8.924078] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 84 [ 8.990816] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 9.005387] pps pps0: new PPS source ptp0 [ 9.069670] fec 2188000.ethernet eth0: registered PHC device 0 [ 9.080969] e1000e: Intel(R) PRO/1000 Network Driver [ 9.085979] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 9.092267] igb: Intel(R) Gigabit Ethernet Network Driver [ 9.097704] igb: Copyright (c) 2007-2014 Intel Corporation. [ 9.126040] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 9.133710] usbcore: registered new interface driver pegasus [ 9.139697] usbcore: registered new interface driver asix [ 9.145285] usbcore: registered new interface driver ax88179_178a [ 9.151664] usbcore: registered new interface driver cdc_ether [ 9.157801] usbcore: registered new interface driver smsc75xx [ 9.163898] usbcore: registered new interface driver smsc95xx [ 9.169896] usbcore: registered new interface driver net1080 [ 9.175737] usbcore: registered new interface driver cdc_subset [ 9.181896] usbcore: registered new interface driver zaurus [ 9.187764] usbcore: registered new interface driver cdc_ncm [ 9.206735] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.213462] ehci-pci: EHCI PCI platform driver [ 9.218110] ehci-platform: EHCI generic platform driver [ 9.224506] ehci-orion: EHCI orion driver [ 9.229552] SPEAr-ehci: EHCI SPEAr driver [ 9.234483] ehci-st: EHCI STMicroelectronics driver [ 9.240350] ehci-exynos: EHCI Exynos driver [ 9.245432] ehci-atmel: EHCI Atmel driver [ 9.250418] tegra-ehci: Tegra EHCI driver [ 9.255370] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 9.261755] ohci-pci: OHCI PCI platform driver [ 9.261800] ata1: SATA link down (SStatus 0 SControl 300) [ 9.266398] ohci-platform: OHCI generic platform driver [ 9.272053] ahci-imx 2200000.sata: no device found, disabling link. [ 9.278058] SPEAr-ohci: OHCI SPEAr driver [ 9.283324] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 9.295602] ohci-st: OHCI STMicroelectronics driver [ 9.301570] ohci-atmel: OHCI Atmel driver [ 9.309282] usbcore: registered new interface driver usb-storage [ 9.349119] i2c /dev entries driver [ 9.438977] sdhci: Secure Digital Host Controller Interface driver [ 9.445207] sdhci: Copyright(c) Pierre Ossman [ 9.459463] Synopsys Designware Multimedia Card Interface Driver [ 9.473107] sdhci-pltfm: SDHCI platform and OF driver helper [ 9.482799] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 9.493966] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 9.501266] ledtrig-cpu: registered to indicate activity on CPUs [ 9.511539] usbcore: registered new interface driver usbhid [ 9.517155] usbhid: USB HID core driver [ 9.531630] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 9.532811] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 9.547060] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 9.547287] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 9.562419] IPv4 over IPsec tunneling driver [ 9.572185] NET: Registered protocol family 10 [ 9.582984] Segment Routing with IPv6 [ 9.591279] mmc0: host does not support reading read-only switch, assuming write-enable [ 9.593603] NET: Registered protocol family 17 [ 9.602113] mmc0: new high speed SDHC card at address 1234 [ 9.610869] Key type dns_resolver registered [ 9.613766] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 9.636291] ThumbEE CPU extension supported. [ 9.640753] Registering SWP/SWPB emulation handler [ 9.650184] Loading compiled-in X.509 certificates [ 9.666152] mmc2: new DDR MMC card at address 0001 [ 9.673627] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 9.679452] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 9.686745] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 9.693872] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (235:0) [ 9.705938] mmcblk2: p1 p2 [ 9.836975] imx_usb 2184200.usb: No over current polarity defined [ 9.850855] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 9.857094] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 9.888794] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 9.909291] hub 1-0:1.0: USB hub found [ 9.914157] hub 1-0:1.0: 1 port detected [ 9.935113] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 10.017022] Freeing unused kernel memory: 2048K [ 10.072726] Run /init as init process [ 10.208867] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: OK Running sysctl: [ 10.425912] hub 1-1:1.0: USB hub found [ 10.434391] hub 1-1:1.0: 4 ports detected OK Populating /dev using udev: [ 10.527804] udevd[134]: starting version 3.2.9 [ 10.536603] random: udevd: uninitialized urandom read (16 bytes read) [ 10.544385] random: udevd: uninitialized urandom read (16 bytes read) [ 10.551933] random: udevd: uninitialized urandom read (16 bytes read) [ 10.572652] udevd[134]: specified user 'tss' unknown [ 10.577932] udevd[134]: specified group 'tss' unknown [ 10.591860] udevd[135]: starting eudev-3.2.9 [ 11.887817] random: udevd: uninitialized urandom read (16 bytes read) [ 12.102737] imx-ipuv3 2400000.ipu: IPUv3H probed [ 12.140344] imx-ipuv3 2800000.ipu: IPUv3H probed [ 12.350595] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops [imxdrm]) [ 12.359725] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops [imxdrm]) [ 12.409257] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops [imxdrm]) [ 12.418069] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops [imxdrm]) [ 12.427895] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 12.532196] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 12.591124] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 12.600721] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 12.611593] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 12.679737] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 12.685919] caam 2100000.crypto: Entropy delay = 3200 [ 12.699899] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 12.708224] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 12.714899] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 12.752286] caam 2100000.crypto: Instantiated RNG4 SH0 [ 12.813044] caam 2100000.crypto: Instantiated RNG4 SH1 [ 12.818252] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 12.825003] caam 2100000.crypto: job rings = 2, qi = 0 [ 12.870590] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 12.888888] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 12.895073] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 13.008896] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 2 [ 13.352363] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 13.362051] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 13.371745] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 13.380759] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 13.468484] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 13.480693] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 14.358450] caam algorithms registered in /proc/crypto [ 14.369820] caam 2100000.crypto: registering rng-caam [ 14.499689] random: crng init done done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-914714/environment . /lava-914714/environment / # /lava-914714/bin/lava-test-runner /lava-914714/0 /lava-914714/bin/lava-test-runner /lava-914714/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-914714/0/tests/0_dmesg + cat uuid + UUID=914714_1.5.2.3.1[ 15.896608] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 16.042932] [ 16.171856] [ 16.301548] + set +x [ 16.313287] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-914714/environment / # . /lava-914714/environment/lava-914714/bin/lava-test-runner /lava-914714/1 / # /lava-914714/bin/lava-test-runner /lava-914714/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-914714/1/tests/1_bootrr + cat uuid + UUID=914714_1.5.2.3.5[ 16.978931] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-914714/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-914714/1/../bin/lava-test-case [ 18.214445] /lava-914714/1/../bin/lava-test-case [ 18.347322] /lava-914714/1/../bin/lava-test-case [ 18.424842] + set +x [ 18.477671] / #