connecting to NetworkSerialPort(target=Target(name='imx23-olinuxino-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4012, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4012 connected to 10.8.254.5 (port 4012) Escape character: Ctrl-\ Type the escape character to get to the prompt. HTLCHTLCHTLCHTLCHTLCHTLCHTLCHTLCHTLCHTLCHTLCLCdetected i.MX23 revision 1.4 Switch to console [cs0] barebox 2023.02.1-dirty #14 Fri Mar 3 18:01:18 CET 2023 Board: Olimex.ltd imx233-olinuxino detected i.MX23 revision 1.4 [1;31mERROR:[0m dma-apbh imx23-dma-apbh0: probe failed: No such file or directory mxs_mci mxs_mci0: registered as mci0 mci0: detected SD card version 2.0 mci0: registered disk0 ehci ehci0: USB EHCI 1.00 malloc space: 0x439fffc0 -> 0x43dfffbf (size 4 MiB) environment load /dev/disk0.1: No such file or directory Maybe you have to create the partition. [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mOlimex.ltd imx233-olinuxino:/[0m bootm -v -r /mnt/tftp/932318/tftp-deploy-zq_ltrj4/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/932318/tftp-deploy-zq_ltrj4/dtb/imx23-olinuxino.dtb /mnt/tftp/932318/tftp-deploy-zq_ltrj4/kernel/zImage [1;32mbarebox@[1;36mOlimex.ltd imx233-olinuxino:/[0m bootm -v -r /mnt/tftp/932318/tftp-deploy-zq_ltrj4/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/932318/tftp-deploy-zq_ltrj4/dtb/imx23-olinuxino.dtb /mnt/tftp/932318/tftp-deploy-zq_ltrj4/kernel/zImage usb: USB: scanning bus for devices... usb1: Bus 001 Device 001: ID 0000:0000 EHCI Host Controller usb1-0: Bus 001 Device 002: ID 0424:9512 usb1-0-0: Bus 001 Device 003: ID 0424:ec00 smsc95xx v1.0.4 mdio_bus: miibus0: probed usb: 3 USB Device(s) found [1;33mWARNING:[0m eth0: No MAC address set. Using random address 12:9e:59:7f:a2:03 eth0: 100Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.60 Loading ARM Linux zImage '/mnt/tftp/932318/tftp-deploy-zq_ltrj4/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler mem_size <= SZ_64M mem_size=60817344 image_size=5632952 no OS load address, defaulting to 0x41add000 T no initrd load address, defaulting to 0x4213d000 T B[1;33mWARNING:[0m tftp: Unexpected packet. global.tftp.windowsize set too high? BBBBBT BBBBBBBBBT BBBBBBBBBBT BLoaded initrd GZIP compressed '/mnt/tftp/932318/tftp-deploy-zq_ltrj4/ramdisk/ramdisk.cpio.gz' initrd is at 0x4213d000-0x42916ca4 Loading devicetree from '/mnt/tftp/932318/tftp-deploy-zq_ltrj4/dtb/imx23-olinuxino.dtb' commandline: console=ttyAMA0,115200 Starting kernel at 0x41add000, initrd at 0x4213d000, oftree at 0x42917000... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.178-cip31 (KernelCI@build-j1380540-arm-gcc-10-mxs-defconfig-n2fjk) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Thu Apr 20 13:51:18 UTC 2023 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: i.MX23 Olinuxino Low Cost Board [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x0000000043ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000043ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x0000000043ffffff] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyAMA0,115200 [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 38164K/65536K available (7886K kernel code, 1155K rwdata, 2700K rodata, 232K init, 6463K bss, 27372K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: mxs_timer: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 911346093 ns [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8192 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] memory used by lock dependency info: 4061 kB [ 0.000000] memory used for stack traces: 2112 kB [ 0.000000] per task-struct memory footprint: 1536 bytes [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns [ 0.000000] Calibrating delay loop... 227.32 BogoMIPS (lpj=1136640) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.090000] CPU: Testing write buffer coherency: ok [ 0.110000] Setting up static identity map for 0x40008400 - 0x40008458 [ 0.120000] devtmpfs: initialized [ 0.170000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.170000] futex hash table entries: 256 (order: 1, 12288 bytes, linear) [ 0.180000] pinctrl core: initialized pinctrl subsystem [ 0.200000] NET: Registered protocol family 16 [ 0.210000] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.450000] Serial: AMBA PL011 UART driver [ 0.450000] 80070000.serial: ttyAMA0 at MMIO 0x80070000 (irq = 17, base_baud = 0) is a PL011 rev2 [ 0.680000] printk: console [ttyAMA0] enabled [ 0.860000] SCSI subsystem initialized [ 0.870000] usbcore: registered new interface driver usbfs [ 0.880000] usbcore: registered new interface driver hub [ 0.880000] usbcore: registered new device driver usb [ 0.890000] pps_core: LinuxPPS API ver. 1 registered [ 0.900000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.900000] PTP clock support registered [ 0.910000] Advanced Linux Sound Architecture Driver Initialized. [ 0.930000] clocksource: Switched to clocksource mxs_timer [ 4.320000] NET: Registered protocol family 2 [ 4.330000] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 4.350000] tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 5632 bytes, linear) [ 4.360000] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 4.360000] TCP bind hash table entries: 1024 (order: 3, 40960 bytes, linear) [ 4.370000] TCP: Hash tables configured (established 1024 bind 1024) [ 4.380000] UDP hash table entries: 256 (order: 2, 24576 bytes, linear) [ 4.390000] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear) [ 4.400000] NET: Registered protocol family 1 [ 4.420000] RPC: Registered named UNIX socket transport module. [ 4.420000] RPC: Registered udp transport module. [ 4.430000] RPC: Registered tcp transport module. [ 4.430000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.450000] Unpacking initramfs... [ 8.150000] Initramfs unpacking failed: write error [ 8.360000] Freeing initrd memory: 8040K [ 8.390000] workingset: timestamp_bits=30 max_order=14 bucket_order=0 [ 8.530000] NFS: Registering the id_resolver key type [ 8.530000] Key type id_resolver registered [ 8.540000] Key type id_legacy registered [ 8.540000] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 8.560000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 8.570000] io scheduler mq-deadline registered [ 8.570000] io scheduler kyber registered [ 8.610000] mxs-dma 80004000.dma-apbh: initialized [ 8.630000] mxs-dma 80024000.dma-apbx: initialized [ 8.650000] 8006c000.serial: ttyAPP0 at MMIO 0x8006c000 (irq = 147, base_baud = 1500000) is a 8006c000.serial [ 8.660000] mxs-auart 8006c000.serial: Found APPUART 3.0.0 [ 8.730000] usbcore: registered new interface driver asix [ 8.740000] usbcore: registered new interface driver ax88179_178a [ 8.750000] usbcore: registered new interface driver cdc_ether [ 8.750000] usbcore: registered new interface driver smsc95xx [ 8.760000] usbcore: registered new interface driver net1080 [ 8.770000] usbcore: registered new interface driver cdc_subset [ 8.770000] usbcore: registered new interface driver zaurus [ 8.780000] usbcore: registered new interface driver cdc_ncm [ 8.790000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.800000] usbcore: registered new interface driver usb-storage [ 8.820000] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 8.830000] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 8.870000] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 8.900000] hub 1-0:1.0: USB hub found [ 8.900000] hub 1-0:1.0: 1 port detected [ 8.940000] stmp3xxx-rtc 8005c000.rtc: registered as rtc0 [ 8.940000] stmp3xxx-rtc 8005c000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 8.960000] i2c /dev entries driver [ 8.980000] stmp3xxx_rtc_wdt stmp3xxx_rtc_wdt: initialized watchdog with heartbeat 19s [ 9.010000] mxs-mmc 80010000.spi: supply vmmc not found, using dummy regulator [ 9.060000] usbcore: registered new interface driver usbhid [ 9.070000] usbhid: USB HID core driver [ 9.090000] mxs-mmc 80010000.spi: initialized [ 9.170000] NET: Registered protocol family 17 [ 9.170000] Key type dns_resolver registered [ 9.180000] registered taskstats version 1 [ 9.190000] mmc0: host does not support reading read-only switch, assuming write-enable [ 9.210000] mmc0: new high speed SDHC card at address aaaa [ 9.230000] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 9.260000] mmcblk0: mmc0:aaaa SS08G 7.40 GiB [ 9.330000] mmcblk0: p1 [ 9.500000] hub 1-1:1.0: USB hub found [ 9.500000] hub 1-1:1.0: 3 ports detected [ 9.530000] ALSA device list: [ 9.530000] No soundcards found. [ 9.550000] uart-pl011 80070000.serial: no DMA platform data [ 9.560000] VFS: Cannot open root device \"(null)\" or unknown-block(0,0): error -6 [ 9.570000] Please append a correct \"root=\" boot option; here are the available partitions: [ 9.580000] b300 7761920 mmcblk0 [ 9.580000] driver: mmcblk [ 9.590000] b301 1024 mmcblk0p1 38d217a6-01 [ 9.590000] [ 9.590000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 9.590000] CPU: 0 PID: 1 Comm: swapper Not tainted 5.10.178-cip31 #1 [ 9.590000] Hardware name: Freescale MXS (Device Tree) [ 9.590000] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 9.590000] [] (show_stack) from [] (panic+0x124/0x358) [ 9.590000] [] (panic) from [] (mount_block_root+0x1d0/0x270) [ 9.590000] [] (mount_block_root) from [] (prepare_namespace+0x12c/0x184) [ 9.590000] [] (prepare_namespace) from [] (kernel_init+0x8/0xf4) [ 9.590000] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 9.590000] Exception stack(0xc14a1fb0 to 0xc14a1ff8) [ 9.590000] 1fa0: 00000000 00000000 00000000 00000000 [ 9.590000] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 9.590000] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 9.590000] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---