Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2002 device serialdev,/dev/ttyUSB-lf-bbb-02,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.192 (82 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 935067/tftp-deploy-55y5qzgo/kernel/zImage tftp 0x82000000 935067/tftp-deploy-55y5qzgo/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.192 Filename '935067/tftp-deploy-55y5qzgo/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 9.3 MiB 4 MiB/s done Bytes transferred = 9699840 (940200 hex) => tftp 0x83000000 935067/tftp-deploy-55y5qzgo/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 935067/tftp-deploy-55y5qzgo/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.192 Filename '935067/tftp-deploy-55y5qzgo/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 15.3 MiB 3.5 MiB/s done Bytes transferred = 16066434 (f52782 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 935067/tftp-deploy-55y5qzgo/dtb/am335x-boneblack.dtb tftp 0x88000000 935067/tftp-deploy-55y5qzgo/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.192 Filename '935067/tftp-deploy-55y5qzgo/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 61.4 KiB 3.5 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x940200 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-05-17 13:59:47 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 16066370 Bytes = 15.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801256b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.180-cip32 (KernelCI@build-j1519578-arm-gcc-10-multi-v7-defconfig-dx2mf) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed May 17 13:30:20 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129540 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 410856K/522240K available (14336K kernel code, 2237K rwdata, 5348K rodata, 2048K init, 426K bss, 45848K reserved, 65536K cma-reserved, 0K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008338] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.019061] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.033132] Console: colour dummy device 80x30 <3>[ 0.037999] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.045049] This ensures that you still see kernel messages. Please <3>[ 0.051769] update your kernel commandline. <6>[ 0.056372] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.096032] pid_max: default: 32768 minimum: 301 <6>[ 0.101238] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.109029] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.118038] CPU: Testing write buffer coherency: ok <6>[ 0.123428] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.129213] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.135515] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.144722] rcu: Hierarchical SRCU implementation. <6>[ 0.154577] EFI services will not be available. <6>[ 0.159752] smp: Bringing up secondary CPUs ... <6>[ 0.164681] smp: Brought up 1 node, 1 CPU <6>[ 0.169070] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.175807] CPU: All CPU(s) started in SVC mode. <6>[ 0.181420] devtmpfs: initialized <6>[ 0.195679] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.204206] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.214641] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.225819] pinctrl core: initialized pinctrl subsystem <6>[ 0.234151] DMI not present or invalid. <6>[ 0.239120] NET: Registered protocol family 16 <6>[ 0.246510] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.273079] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.281267] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.281480] cpuidle: using governor menu <6>[ 1.352319] No ATAGs? <6>[ 1.354944] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.369686] Serial: AMBA PL011 UART driver <6>[ 1.408025] iommu: Default domain type: Translated <6>[ 1.413890] vgaarb: loaded <5>[ 1.417916] SCSI subsystem initialized <6>[ 1.422799] usbcore: registered new interface driver usbfs <6>[ 1.428757] usbcore: registered new interface driver hub <6>[ 1.434621] usbcore: registered new device driver usb <6>[ 1.441928] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.447311] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.457044] PTP clock support registered <6>[ 1.465363] clocksource: Switched to clocksource dmtimer <6>[ 2.435910] NET: Registered protocol family 2 <6>[ 2.440932] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.449451] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.458383] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.466668] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.474324] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.481251] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.488277] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.495868] NET: Registered protocol family 1 <6>[ 2.501509] RPC: Registered named UNIX socket transport module. <6>[ 2.507956] RPC: Registered udp transport module. <6>[ 2.513060] RPC: Registered tcp transport module. <6>[ 2.518183] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.525081] PCI: CLS 0 bytes, default 64 <6>[ 2.530117] Trying to unpack rootfs image as initramfs... <6>[ 3.596750] Freeing initrd memory: 15692K <6>[ 3.602163] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.612512] Initialise system trusted keyrings <6>[ 3.617812] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 3.630925] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.638262] NFS: Registering the id_resolver key type <5>[ 3.643793] Key type id_resolver registered <5>[ 3.648428] Key type id_legacy registered <6>[ 3.652936] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.660145] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.668078] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.673405] Key type asymmetric registered <5>[ 3.677948] Asymmetric key parser 'x509' registered <6>[ 3.683280] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.691182] io scheduler mq-deadline registered <6>[ 3.696121] io scheduler kyber registered <3>[ 3.851204] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.859908] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.980651] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 4.026343] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 4.105107] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.113817] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 4.179615] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.188300] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 4.206961] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.215637] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 4.284913] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 4.293474] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 4.335915] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 4.439513] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 4.451837] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 4.461266] printk: console [ttyS0] enabled <6>[ 4.461266] printk: console [ttyS0] enabled <6>[ 4.470319] printk: bootconsole [omap8250] disabled <6>[ 4.470319] printk: bootconsole [omap8250] disabled <6>[ 4.484103] SuperH (H)SCI(F) driver initialized <6>[ 4.491187] msm_serial: driver initialized <6>[ 4.496103] STMicroelectronics ASC driver initialized <6>[ 4.504206] STM32 USART driver initialized <6>[ 4.511707] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 4.532103] random: crng init done <6>[ 4.545214] brd: module loaded <6>[ 4.556408] loop: module loaded <6>[ 4.581698] CAN device driver interface <6>[ 4.587872] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 4.596185] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 4.601444] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 4.607812] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 4.613498] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 4.685468] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 4.721881] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 4.731808] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 4.738514] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 4.744350] cpsw 4a100000.ethernet: Detected MACID = 04:79:b7:e7:06:e0 <6>[ 4.753511] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 4.761441] usbcore: registered new interface driver pegasus <6>[ 4.767479] usbcore: registered new interface driver asix <6>[ 4.773195] usbcore: registered new interface driver ax88179_178a <6>[ 4.779631] usbcore: registered new interface driver cdc_ether <6>[ 4.785832] usbcore: registered new interface driver smsc75xx <6>[ 4.791904] usbcore: registered new interface driver smsc95xx <6>[ 4.798008] usbcore: registered new interface driver net1080 <6>[ 4.803982] usbcore: registered new interface driver cdc_subset <6>[ 4.810239] usbcore: registered new interface driver zaurus <6>[ 4.816180] usbcore: registered new interface driver cdc_ncm <6>[ 4.827803] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 4.834641] ehci-pci: EHCI PCI platform driver <6>[ 4.839490] ehci-platform: EHCI generic platform driver <6>[ 4.845555] ehci-orion: EHCI orion driver <6>[ 4.850217] SPEAr-ehci: EHCI SPEAr driver <6>[ 4.854806] ehci-st: EHCI STMicroelectronics driver <6>[ 4.860336] ehci-exynos: EHCI Exynos driver <6>[ 4.865106] ehci-atmel: EHCI Atmel driver <6>[ 4.869749] tegra-ehci: Tegra EHCI driver <6>[ 4.874372] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 4.880939] ohci-pci: OHCI PCI platform driver <6>[ 4.885769] ohci-platform: OHCI generic platform driver <6>[ 4.891720] SPEAr-ohci: OHCI SPEAr driver <6>[ 4.896395] ohci-st: OHCI STMicroelectronics driver <6>[ 4.901861] ohci-atmel: OHCI Atmel driver <6>[ 4.907904] usbcore: registered new interface driver usb-storage <6>[ 4.925069] i2c /dev entries driver <5>[ 4.957575] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 4.965938] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.972421] sdhci: Copyright(c) Pierre Ossman <6>[ 4.981432] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.990831] sdhci-pltfm: SDHCI platform and OF driver helper <4>[ 5.005682] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 5.040291] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 5.049837] usbcore: registered new interface driver usbhid <6>[ 5.055840] usbhid: USB HID core driver <6>[ 5.069492] NET: Registered protocol family 10 <6>[ 5.075841] Segment Routing with IPv6 <6>[ 5.079874] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 5.086898] NET: Registered protocol family 17 <6>[ 5.091645] can: controller area network core <6>[ 5.096429] NET: Registered protocol family 29 <6>[ 5.101157] can: raw protocol <6>[ 5.104402] can: broadcast manager protocol <6>[ 5.108896] can: netlink gateway - max_hops=1 <5>[ 5.114310] Key type dns_resolver registered <6>[ 5.119076] ThumbEE CPU extension supported. <5>[ 5.123649] Registering SWP/SWPB emulation handler <3>[ 5.129182] omap_voltage_late_init: Voltage driver support not added <6>[ 5.137454] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <5>[ 5.146340] Loading compiled-in X.509 certificates <6>[ 5.167827] OMAP GPIO hardware version 0.1 <4>[ 5.205946] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 5.219183] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 5.234431] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <4>[ 5.240815] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 5.248239] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 5.256226] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <4>[ 5.266154] at24 2-0054: supply vcc not found, using dummy regulator <6>[ 5.275757] mmc1: new high speed MMC card at address 0001 <6>[ 5.282301] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 5.287549] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 5.294078] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 5.300715] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (235:0) <6>[ 5.310212] mmcblk1: p1 <4>[ 5.314340] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 5.349129] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 5.388687] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 5.428975] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 5.452599] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 5.461782] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 5.466924] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 5.554859] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 5.566848] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 5.657221] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 8.836307] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 8.855523] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 8.885514] Sending DHCP requests ., OK <6>[ 9.009637] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.192 <6>[ 9.017618] IP-Config: Complete: <6>[ 9.021161] device=eth0, hwaddr=04:79:b7:e7:06:e0, ipaddr=172.16.3.192, mask=255.255.255.0, gw=172.16.3.3 <6>[ 9.031570] host=172.16.3.192, domain=denx.de, nis-domain=(none) <6>[ 9.038384] bootserver=172.16.3.33, rootserver=172.16.3.33, rootpath= <6>[ 9.038403] nameserver0=172.16.3.3 <6>[ 9.049772] ntpserver0=172.16.3.3 <6>[ 9.067404] Freeing unused kernel memory: 2048K <6>[ 9.076360] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 9.275808] udevd[97]: starting version 3.2.9 <27>[ 9.292196] udevd[97]: specified user 'tss' unknown <27>[ 9.297984] udevd[97]: specified group 'tss' unknown <30>[ 9.317383] udevd[98]: starting eudev-3.2.9 <4>[ 11.018412] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 11.027611] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <4>[ 11.266691] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 11.275799] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 11.398301] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 11.403954] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 11.665871] hub 1-0:1.0: USB hub found <6>[ 11.695479] hub 1-0:1.0: 1 port detected done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-935067/environment . /lava-935067/environment / # /lava-935067/bin/lava-test-runner /lava-935067/0 /lava-935067/bin/lava-test-runner /lava-935067/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-935067/0/tests/0_dmesg + cat uuid + UUID=935067_1.5.2.4.1 + <8>[ 16.591746] set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 16.648854] <8>[ 16.700753] <8>[ 16.752921] + set +x <8>[ 16.763886] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-935067/environment / # . /lava-935067/environment/lava-935067/bin/lava-test-runner /lava-935067/1 / # /lava-935067/bin/lava-test-runner /lava-935067/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-935067/1/tests/1_bootrr + cat uuid + UUID=935067_1.5.2.4.5 + <8>[ 17.293571] set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-935067/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto sound /lava-935067/1/../bin/lava-test-case <8>[ 18.384924] /lava-935067/1/../bin/lava-test-case <8>[ 18.434002] /lava-935067/1/../bin/lava-test-case <8>[ 18.463849] /lava-935067/1/../bin/lava-test-case <8>[ 18.518918] /lava-935067/1/../bin/lava-test-case <8>[ 18.565709] /lava-935067/1/../bin/lava-test-case <8>[ 18.602479] /lava-935067/1/../bin/lava-test-case <8>[ 18.649137] /lava-935067/1/../bin/lava-test-case <8>[ 18.694175] /lava-935067/1/../bin/lava-test-case <8>[ 18.731394] /lava-935067/1/../bin/lava-test-case <8>[ 18.777266] /lava-935067/1/../bin/lava-test-case <8>[ 19.853099] /lava-935067/1/../bin/lava-test-case <8>[ 20.914649] /lava-935067/1/../bin/lava-test-case <8>[ 20.951545] /lava-935067/1/../bin/lava-test-case <8>[ 20.987649] /lava-935067/1/../bin/lava-test-case <8>[ 21.024249] /lava-935067/1/../bin/lava-test-case <8>[ 21.069726] /lava-935067/1/../bin/lava-test-case <8>[ 21.108149] /lava-935067/1/../bin/lava-test-case <8>[ 21.154290] /lava-935067/1/../bin/lava-test-case <8>[ 21.199903] /lava-935067/1/../bin/lava-test-case <8>[ 21.236759] /lava-935067/1/../bin/lava-test-case <8>[ 21.282946] /lava-935067/1/../bin/lava-test-case <8>[ 21.329264] /lava-935067/1/../bin/lava-test-case <8>[ 21.367448] /lava-935067/1/../bin/lava-test-case <8>[ 21.413370] /lava-935067/1/../bin/lava-test-case <8>[ 21.450874] /lava-935067/1/../bin/lava-test-case <8>[ 21.497113] /lava-935067/1/../bin/lava-test-case <8>[ 22.561452] /lava-935067/1/../bin/lava-test-case <8>[ 23.624431] /lava-935067/1/../bin/lava-test-case <8>[ 23.662309] /lava-935067/1/../bin/lava-test-case <8>[ 23.708840] /lava-935067/1/../bin/lava-test-case <8>[ 23.746388] /lava-935067/1/../bin/lava-test-case <8>[ 23.792056] /lava-935067/1/../bin/lava-test-case <8>[ 24.854341] /lava-935067/1/../bin/lava-test-case <8>[ 25.915292] /lava-935067/1/../bin/lava-test-case <8>[ 25.952623] /lava-935067/1/../bin/lava-test-case <8>[ 25.998938] /lava-935067/1/../bin/lava-test-case <8>[ 27.062315] /lava-935067/1/../bin/lava-test-case <8>[ 28.123831] /lava-935067/1/../bin/lava-test-case <8>[ 29.184778] /lava-935067/1/../bin/lava-test-case <8>[ 30.245978] /lava-935067/1/../bin/lava-test-case <8>[ 31.305751] /lava-935067/1/../bin/lava-test-case <8>[ 32.371916] /lava-935067/1/../bin/lava-test-case <8>[ 33.434408] /lava-935067/1/../bin/lava-test-case <8>[ 34.495917] /lava-935067/1/../bin/lava-test-case <8>[ 35.555942] /lava-935067/1/../bin/lava-test-case <8>[ 36.621686] /lava-935067/1/../bin/lava-test-case <8>[ 37.684006] /lava-935067/1/../bin/lava-test-case <8>[ 38.740751] /lava-935067/1/../bin/lava-test-case <8>[ 39.804274] /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found /lava-935067/1/../bin/lava-test-case <8>[ 39.843133] /lava-935067/1/../bin/lava-test-case <8>[ 40.914293] /lava-935067/1/../bin/lava-test-case <8>[ 41.974738] + set +x <8>[ 41.990400] / #