Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2000 device serialdev,/dev/ttyUSB-lf-bbb-01,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.204 (81 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 947448/tftp-deploy-ab3lg279/kernel/zImage tftp 0x82000000 947448/tftp-deploy-ab3lg279/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.204 Filename '947448/tftp-deploy-ab3lg279/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 9.3 MiB 5 MiB/s done Bytes transferred = 9703936 (941200 hex) => tftp 0x83000000 947448/tftp-deploy-ab3lg279/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 947448/tftp-deploy-ab3lg279/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.204 Filename '947448/tftp-deploy-ab3lg279/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 15.3 MiB 3.9 MiB/s done Bytes transferred = 16064262 (f51f06 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 947448/tftp-deploy-ab3lg279/dtb/am335x-boneblack.dtb tftp 0x88000000 947448/tftp-deploy-ab3lg279/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.204 Filename '947448/tftp-deploy-ab3lg279/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 61.4 KiB 3.7 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x941200 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-05-30 16:10:59 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 16064198 Bytes = 15.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801256b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.181-cip34 (KernelCI@build-j1586965-arm-gcc-10-multi-v7-defconfig-72vgv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue May 30 15:46:59 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129540 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 410860K/522240K available (14336K kernel code, 2237K rwdata, 5348K rodata, 2048K init, 426K bss, 45844K reserved, 65536K cma-reserved, 0K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000012] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008339] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.019059] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.033117] Console: colour dummy device 80x30 <3>[ 0.037981] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.045029] This ensures that you still see kernel messages. Please <3>[ 0.051749] update your kernel commandline. <6>[ 0.056355] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.096026] pid_max: default: 32768 minimum: 301 <6>[ 0.101229] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.109019] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.118027] CPU: Testing write buffer coherency: ok <6>[ 0.123419] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.129212] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.135519] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.144711] rcu: Hierarchical SRCU implementation. <6>[ 0.154581] EFI services will not be available. <6>[ 0.159754] smp: Bringing up secondary CPUs ... <6>[ 0.164687] smp: Brought up 1 node, 1 CPU <6>[ 0.169076] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.175811] CPU: All CPU(s) started in SVC mode. <6>[ 0.181429] devtmpfs: initialized <6>[ 0.195586] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.204117] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.214539] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.225681] pinctrl core: initialized pinctrl subsystem <6>[ 0.233998] DMI not present or invalid. <6>[ 0.238963] NET: Registered protocol family 16 <6>[ 0.246336] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.273019] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.281210] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.281419] cpuidle: using governor menu <6>[ 1.336053] No ATAGs? <6>[ 1.338679] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.353396] Serial: AMBA PL011 UART driver <6>[ 1.391600] iommu: Default domain type: Translated <6>[ 1.397317] vgaarb: loaded <5>[ 1.401443] SCSI subsystem initialized <6>[ 1.406455] usbcore: registered new interface driver usbfs <6>[ 1.412516] usbcore: registered new interface driver hub <6>[ 1.418294] usbcore: registered new device driver usb <6>[ 1.425617] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.431050] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.440740] PTP clock support registered <6>[ 1.448804] clocksource: Switched to clocksource dmtimer <6>[ 2.419339] NET: Registered protocol family 2 <6>[ 2.424364] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.432866] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.441800] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.450085] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.457740] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.464667] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.471689] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.479281] NET: Registered protocol family 1 <6>[ 2.484880] RPC: Registered named UNIX socket transport module. <6>[ 2.491320] RPC: Registered udp transport module. <6>[ 2.496423] RPC: Registered tcp transport module. <6>[ 2.501541] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.508437] PCI: CLS 0 bytes, default 64 <6>[ 2.513450] Trying to unpack rootfs image as initramfs... <6>[ 3.576972] Freeing initrd memory: 15688K <6>[ 3.582400] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.592730] Initialise system trusted keyrings <6>[ 3.597953] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 3.611121] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.618342] NFS: Registering the id_resolver key type <5>[ 3.623944] Key type id_resolver registered <5>[ 3.628512] Key type id_legacy registered <6>[ 3.633046] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.640251] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.648160] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.653510] Key type asymmetric registered <5>[ 3.657998] Asymmetric key parser 'x509' registered <6>[ 3.663382] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.671279] io scheduler mq-deadline registered <6>[ 3.676203] io scheduler kyber registered <3>[ 3.829268] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.837885] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.957020] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 4.002223] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 4.080070] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.088693] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 4.153768] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.162455] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 4.180971] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.189670] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 4.258108] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 4.266665] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 4.308755] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 4.412129] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 4.424409] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 4.433837] printk: console [ttyS0] enabled <6>[ 4.433837] printk: console [ttyS0] enabled <6>[ 4.442892] printk: bootconsole [omap8250] disabled <6>[ 4.442892] printk: bootconsole [omap8250] disabled <6>[ 4.456633] SuperH (H)SCI(F) driver initialized <6>[ 4.463691] msm_serial: driver initialized <6>[ 4.468470] STMicroelectronics ASC driver initialized <6>[ 4.476670] STM32 USART driver initialized <6>[ 4.484111] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 4.504265] random: crng init done <6>[ 4.517351] brd: module loaded <6>[ 4.528358] loop: module loaded <6>[ 4.553473] CAN device driver interface <6>[ 4.559581] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 4.567783] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 4.573102] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 4.579450] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 4.585135] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 4.658844] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 4.695238] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 4.705167] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 4.711870] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 4.717700] cpsw 4a100000.ethernet: Detected MACID = 34:03:de:5e:2c:05 <6>[ 4.726843] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 4.734770] usbcore: registered new interface driver pegasus <6>[ 4.740804] usbcore: registered new interface driver asix <6>[ 4.746522] usbcore: registered new interface driver ax88179_178a <6>[ 4.752957] usbcore: registered new interface driver cdc_ether <6>[ 4.759158] usbcore: registered new interface driver smsc75xx <6>[ 4.765230] usbcore: registered new interface driver smsc95xx <6>[ 4.771330] usbcore: registered new interface driver net1080 <6>[ 4.777305] usbcore: registered new interface driver cdc_subset <6>[ 4.783562] usbcore: registered new interface driver zaurus <6>[ 4.789504] usbcore: registered new interface driver cdc_ncm <6>[ 4.801002] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 4.807839] ehci-pci: EHCI PCI platform driver <6>[ 4.812679] ehci-platform: EHCI generic platform driver <6>[ 4.818663] ehci-orion: EHCI orion driver <6>[ 4.823394] SPEAr-ehci: EHCI SPEAr driver <6>[ 4.827993] ehci-st: EHCI STMicroelectronics driver <6>[ 4.833512] ehci-exynos: EHCI Exynos driver <6>[ 4.838283] ehci-atmel: EHCI Atmel driver <6>[ 4.842927] tegra-ehci: Tegra EHCI driver <6>[ 4.847542] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 4.854107] ohci-pci: OHCI PCI platform driver <6>[ 4.858935] ohci-platform: OHCI generic platform driver <6>[ 4.864890] SPEAr-ohci: OHCI SPEAr driver <6>[ 4.869559] ohci-st: OHCI STMicroelectronics driver <6>[ 4.875017] ohci-atmel: OHCI Atmel driver <6>[ 4.881052] usbcore: registered new interface driver usb-storage <6>[ 4.898056] i2c /dev entries driver <5>[ 4.930259] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 4.938456] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.945030] sdhci: Copyright(c) Pierre Ossman <6>[ 4.953995] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.963381] sdhci-pltfm: SDHCI platform and OF driver helper <4>[ 4.978082] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 5.037933] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 5.047430] usbcore: registered new interface driver usbhid <6>[ 5.053416] usbhid: USB HID core driver <6>[ 5.066958] NET: Registered protocol family 10 <6>[ 5.073248] Segment Routing with IPv6 <6>[ 5.077280] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 5.084310] NET: Registered protocol family 17 <6>[ 5.089114] can: controller area network core <6>[ 5.093839] NET: Registered protocol family 29 <6>[ 5.098566] can: raw protocol <6>[ 5.101861] can: broadcast manager protocol <6>[ 5.106335] can: netlink gateway - max_hops=1 <5>[ 5.111769] Key type dns_resolver registered <6>[ 5.116465] ThumbEE CPU extension supported. <5>[ 5.121105] Registering SWP/SWPB emulation handler <3>[ 5.126616] omap_voltage_late_init: Voltage driver support not added <6>[ 5.134841] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <5>[ 5.143740] Loading compiled-in X.509 certificates <6>[ 5.165086] OMAP GPIO hardware version 0.1 <4>[ 5.199389] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 5.212653] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 5.227820] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <4>[ 5.234183] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 5.241575] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 5.249563] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <4>[ 5.259503] at24 2-0054: supply vcc not found, using dummy regulator <6>[ 5.269244] mmc1: new high speed MMC card at address 0001 <6>[ 5.275785] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 5.281034] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 5.287564] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 5.294193] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (235:0) <6>[ 5.303696] mmcblk1: p1 <4>[ 5.307825] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 5.342628] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 5.382194] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 5.422420] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 5.445984] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 5.455164] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 5.460287] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 5.548257] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 5.590393] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 5.680673] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 7.799720] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.828858] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.858930] Sending DHCP requests ., OK <6>[ 7.963085] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.204 <6>[ 7.971064] IP-Config: Complete: <6>[ 7.974607] device=eth0, hwaddr=34:03:de:5e:2c:05, ipaddr=172.16.3.204, mask=255.255.255.0, gw=172.16.3.3 <6>[ 7.984990] host=172.16.3.204, domain=denx.de, nis-domain=(none) <6>[ 7.991794] bootserver=172.16.3.33, rootserver=172.16.3.33, rootpath= <6>[ 7.991814] nameserver0=172.16.3.3 <6>[ 8.003182] ntpserver0=172.16.3.3 <6>[ 8.020766] Freeing unused kernel memory: 2048K <6>[ 8.029917] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 8.229954] udevd[97]: starting version 3.2.9 <27>[ 8.246034] udevd[97]: specified user 'tss' unknown <27>[ 8.251797] udevd[97]: specified group 'tss' unknown <30>[ 8.270893] udevd[98]: starting eudev-3.2.9 <4>[ 9.949056] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 9.958062] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <4>[ 10.230192] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 10.239270] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 10.356701] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 10.362535] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 10.570371] hub 1-0:1.0: USB hub found <6>[ 10.599051] hub 1-0:1.0: 1 port detected done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-947448/environment . /lava-947448/environment / # /lava-947448/bin/lava-test-runner /lava-947448/0 /lava-947448/bin/lava-test-runner /lava-947448/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-947448/0/tests/0_dmesg + cat uuid + UUID=947448_1.5.2.4.1 + <8>[ 15.485077] set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 15.541593] <8>[ 15.593006] <8>[ 15.644821] + set +x <8>[ 15.655678] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-947448/environment / # . /lava-947448/environment/lava-947448/bin/lava-test-runner /lava-947448/1 / # /lava-947448/bin/lava-test-runner /lava-947448/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-947448/1/tests/1_bootrr + cat uuid + UUID=947448_1.5.2.4.5 + <8>[ 16.182954] set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-947448/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto sound /lava-947448/1/../bin/lava-test-case <8>[ 17.276158] /lava-947448/1/../bin/lava-test-case <8>[ 17.325124] /lava-947448/1/../bin/lava-test-case <8>[ 17.354909] /lava-947448/1/../bin/lava-test-case <8>[ 17.409919] /lava-947448/1/../bin/lava-test-case <8>[ 17.455700] /lava-947448/1/../bin/lava-test-case <8>[ 17.492549] /lava-947448/1/../bin/lava-test-case <8>[ 17.538436] /lava-947448/1/../bin/lava-test-case <8>[ 17.583782] /lava-947448/1/../bin/lava-test-case <8>[ 17.620684] /lava-947448/1/../bin/lava-test-case <8>[ 17.665947] /lava-947448/1/../bin/lava-test-case <8>[ 18.727628] /lava-947448/1/../bin/lava-test-case <8>[ 19.788622] /lava-947448/1/../bin/lava-test-case <8>[ 19.825162] /lava-947448/1/../bin/lava-test-case <8>[ 19.861299] /lava-947448/1/../bin/lava-test-case <8>[ 19.897959] /lava-947448/1/../bin/lava-test-case <8>[ 19.943453] /lava-947448/1/../bin/lava-test-case <8>[ 19.981484] /lava-947448/1/../bin/lava-test-case <8>[ 20.027571] /lava-947448/1/../bin/lava-test-case <8>[ 20.073179] /lava-947448/1/../bin/lava-test-case <8>[ 20.109738] /lava-947448/1/../bin/lava-test-case <8>[ 20.155452] /lava-947448/1/../bin/lava-test-case <8>[ 20.201671] /lava-947448/1/../bin/lava-test-case <8>[ 20.239394] /lava-947448/1/../bin/lava-test-case <8>[ 20.285638] /lava-947448/1/../bin/lava-test-case <8>[ 20.322958] /lava-947448/1/../bin/lava-test-case <8>[ 20.369287] /lava-947448/1/../bin/lava-test-case <8>[ 21.429086] /lava-947448/1/../bin/lava-test-case <8>[ 22.494853] /lava-947448/1/../bin/lava-test-case <8>[ 22.532601] /lava-947448/1/../bin/lava-test-case <8>[ 22.579409] /lava-947448/1/../bin/lava-test-case <8>[ 22.616600] /lava-947448/1/../bin/lava-test-case <8>[ 22.662494] /lava-947448/1/../bin/lava-test-case <8>[ 23.725584] /lava-947448/1/../bin/lava-test-case <8>[ 24.787503] /lava-947448/1/../bin/lava-test-case <8>[ 24.824692] /lava-947448/1/../bin/lava-test-case <8>[ 24.870654] /lava-947448/1/../bin/lava-test-case <8>[ 25.935586] /lava-947448/1/../bin/lava-test-case <8>[ 26.990426] /lava-947448/1/../bin/lava-test-case <8>[ 28.056251] /lava-947448/1/../bin/lava-test-case <8>[ 29.117802] /lava-947448/1/../bin/lava-test-case <8>[ 30.178348] /lava-947448/1/../bin/lava-test-case <8>[ 31.245202] /lava-947448/1/../bin/lava-test-case <8>[ 32.307097] /lava-947448/1/../bin/lava-test-case <8>[ 33.368417] /lava-947448/1/../bin/lava-test-case <8>[ 34.428460] /lava-947448/1/../bin/lava-test-case <8>[ 35.489297] /lava-947448/1/../bin/lava-test-case <8>[ 36.549474] /lava-947448/1/../bin/lava-test-case <8>[ 37.614807] /lava-947448/1/../bin/lava-test-case <8>[ 38.676876] /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found /lava-947448/1/../bin/lava-test-case <8>[ 38.716042] /lava-947448/1/../bin/lava-test-case <8>[ 39.787718] /lava-947448/1/../bin/lava-test-case <8>[ 40.847800] + set +x <8>[ 40.863507] / #