Connected to bbb-patersonc-01 console [channel connected] (~$quit to exit) U-Boot SPL 2020.10 (Apr 28 2023 - 11:09:01 +0100) Trying to boot from MMC2 U-Boot 2020.10 (Apr 28 2023 - 11:09:01 +0100) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... Unable to use mmc 1:1... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.1.81 (1030 ms) => setenv serverip 192.168.1.1 setenv serverip 192.168.1.1 => tftp 0x82000000 994499/tftp-deploy-k2efq3_p/kernel/zImage tftp 0x82000000 994499/tftp-deploy-k2efq3_p/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.81 Filename '994499/tftp-deploy-k2efq3_p/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.3 MiB/s done Bytes transferred = 4608064 (465040 hex) => tftp 0x83000000 994499/tftp-deploy-k2efq3_p/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 994499/tftp-deploy-k2efq3_p/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.81 Filename '994499/tftp-deploy-k2efq3_p/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 4.2 MiB/s done Bytes transferred = 14161438 (d8161e hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 994499/tftp-deploy-k2efq3_p/dtb/am335x-boneblack.dtb tftp 0x88000000 994499/tftp-deploy-k2efq3_p/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.81 Filename '994499/tftp-deploy-k2efq3_p/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *##### 4 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-08-09 0:02:50 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 14161374 Bytes = 13.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801256b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.189-cip37 (KernelCI@build-j6415-arm-gcc-10-omap2plus-defconfig-t4kp6) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Aug 8 23:21:28 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 20 pages/cpu s49740 r8192 d23988 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 472036K/522240K available (9216K kernel code, 1027K rwdata, 2176K rodata, 1024K init, 278K bss, 33820K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000012] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008344] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018563] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030209] Console: colour dummy device 80x30 <3>[ 0.035080] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042139] This ensures that you still see kernel messages. Please <3>[ 0.048864] update your kernel commandline. <6>[ 0.053468] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095543] CPU: Testing write buffer coherency: ok <6>[ 0.100929] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106393] pid_max: default: 32768 minimum: 301 <6>[ 0.111558] LSM: Security Framework initializing <6>[ 0.116656] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124471] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134141] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.140693] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.147896] rcu: Hierarchical SRCU implementation. <6>[ 0.153707] smp: Bringing up secondary CPUs ... <6>[ 0.158644] smp: Brought up 1 node, 1 CPU <6>[ 0.163090] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.169831] CPU: All CPU(s) started in SVC mode. <6>[ 0.175576] devtmpfs: initialized <6>[ 0.191209] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.199748] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.210190] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.218757] pinctrl core: initialized pinctrl subsystem <6>[ 0.226389] NET: Registered protocol family 16 <6>[ 0.233980] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.260416] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.266503] audit: initializing netlink subsys (disabled) <6>[ 0.273577] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.273590] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.280199] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.286914] cpuidle: using governor menu <5>[ 1.179036] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1 <6>[ 1.305826] No ATAGs? <6>[ 1.308454] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.333020] Kprobes globally optimized <6>[ 1.346217] iommu: Default domain type: Translated <6>[ 1.353392] vgaarb: loaded <5>[ 1.356982] SCSI subsystem initialized <6>[ 1.362385] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.367772] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.377555] PTP clock support registered <6>[ 1.383162] clocksource: Switched to clocksource dmtimer <5>[ 2.054583] VFS: Disk quotas dquot_6.6.0 <6>[ 2.058996] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 2.076050] NET: Registered protocol family 2 <6>[ 2.081114] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.089823] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.098786] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.107081] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.114761] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.121680] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.128712] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.136332] NET: Registered protocol family 1 <6>[ 2.142131] RPC: Registered named UNIX socket transport module. <6>[ 2.148594] RPC: Registered udp transport module. <6>[ 2.153723] RPC: Registered tcp transport module. <6>[ 2.158829] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.165758] PCI: CLS 0 bytes, default 64 <6>[ 2.170784] Trying to unpack rootfs image as initramfs... <6>[ 3.160367] Freeing initrd memory: 13832K <6>[ 3.166384] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.176849] Initialise system trusted keyrings <6>[ 3.182271] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 3.190540] NFS: Registering the id_resolver key type <5>[ 3.196151] Key type id_resolver registered <5>[ 3.200723] Key type id_legacy registered <6>[ 3.205197] jffs2: version 2.2. (NAND) (SUMMARY) B) 2001-2006 Red Hat, Inc. <5>[ 3.213209] Key type asymmetric registered <5>[ 3.217700] Asymmetric key parser 'x509' registered <6>[ 3.222998] io scheduler mq-deadline registered <6>[ 3.227958] io scheduler kyber registered <3>[ 3.368131] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.376832] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.487114] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 3.529706] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 3.602466] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.611180] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 3.671872] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.680574] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 3.698209] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.706896] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 3.771098] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.779671] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 3.806841] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 3.821353] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <6>[ 3.832248] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 3.841679] printk: console [ttyS0] enabled <6>[ 3.841679] printk: console [ttyS0] enabled <6>[ 3.850755] printk: bootconsole [omap8250] disabled <6>[ 3.850755] printk: bootconsole [omap8250] disabled <6>[ 3.874578] brd: module loaded <6>[ 3.886824] loop: module loaded <3>[ 3.892290] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 3.963197] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 4.005594] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 4.015531] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 4.022184] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 4.027998] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) <6>[ 4.035547] cpsw 4a100000.ethernet: Detected MACID = f4:b8:98:ab:fa:84 <6>[ 4.044590] i2c /dev entries driver <5>[ 4.050075] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 4.058015] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.064552] sdhci: Copyright(c) Pierre Ossman <6>[ 4.069886] sdhci-pltfm: SDHCI platform and OF driver helper <4>[ 4.078214] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.088077] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.096566] Initializing XFRM netlink socket <6>[ 4.101360] NET: Registered protocol family 10 <6>[ 4.107800] Segment Routing with IPv6 <6>[ 4.111849] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.118926] NET: Registered protocol family 17 <6>[ 4.123784] NET: Registered protocol family 15 <5>[ 4.128675] Key type dns_resolver registered <6>[ 4.133869] oprofile: using arm/armv7 <6>[ 4.137906] ThumbEE CPU extension supported. <5>[ 4.142481] Registering SWP/SWPB emulation handler <3>[ 4.148029] omap_voltage_late_init: Voltage driver support not added <3>[ 4.154746] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize <3>[ 4.163161] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize <6>[ 4.171833] SmartReflex Class3 initialized <6>[ 4.176924] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <5>[ 4.185905] Loading compiled-in X.509 certificates <6>[ 4.210792] OMAP GPIO hardware version 0.1 <4>[ 4.243829] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.257430] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.266034] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.272383] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.282407] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 4.293901] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.302914] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.308149] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.321653] mmc1: new high speed MMC card at address 0001 <6>[ 4.328559] mmcblk1: mmc1:0001 MK2704 3.53 GiB <6>[ 4.334096] mmcblk1boot0: mmc1:0001 MK2704 partition 1 2.00 MiB <6>[ 4.340746] mmcblk1boot1: mmc1:0001 MK2704 partition 2 2.00 MiB <6>[ 4.347352] mmcblk1rpmb: mmc1:0001 MK2704 partition 3 512 KiB, chardev (249:0) <6>[ 4.356880] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.365863] mmcblk1: p1 <6>[ 4.374073] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 4.464675] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 7.643810] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.663164] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.693258] Sending DHCP requests ., OK <6>[ 7.737245] IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.81 <6>[ 7.745233] IP-Config: Complete: <6>[ 7.748743] device=eth0, hwaddr=f4:b8:98:ab:fa:84, ipaddr=192.168.1.81, mask=255.255.255.0, gw=192.168.1.1 <6>[ 7.759156] host=192.168.1.81, domain=example.org, nis-domain=(none) <6>[ 7.766271] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= <6>[ 7.766278] nameserver0=192.168.1.1 <6>[ 7.779655] Freeing unused kernel memory: 1024K <6>[ 7.803597] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 8.034415] udevd[100]: starting version 3.2.9 <5>[ 8.040742] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 8.049004] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 8.056125] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 8.072834] udevd[100]: specified user 'tss' unknown <27>[ 8.078694] udevd[100]: specified group 'tss' unknown <30>[ 8.095422] udevd[101]: starting eudev-3.2.9 <6>[ 8.900270] remoteproc remoteproc0: wkup_m3 is available <4>[ 8.933686] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 8.942662] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 9.010598] usbcore: registered new interface driver usbfs <6>[ 9.016656] usbcore: registered new interface driver hub <6>[ 9.022344] usbcore: registered new device driver usb <4>[ 9.221387] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 9.230570] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 9.455808] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 9.461466] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 9.671619] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 9.680340] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 9.687912] usb usb1: Product: MUSB HDRC host driver <6>[ 9.693196] usb usb1: Manufacturer: Linux 5.10.189-cip37 musb-hcd <6>[ 9.699578] usb usb1: SerialNumber: musb-hdrc.1 <4>[ 9.732419] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 9.863527] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <4>[ 9.871186] at24 2-0054: supply vcc not found, using dummy regulator <4>[ 9.910031] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <6>[ 10.023903] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 10.029327] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) <6>[ 10.049597] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <6>[ 10.083520] hub 1-0:1.0: USB hub found <6>[ 10.089515] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <4>[ 10.115577] at24 2-0055: supply vcc not found, using dummy regulator <6>[ 10.132452] hub 1-0:1.0: 1 port detected <4>[ 10.218554] at24 2-0056: supply vcc not found, using dummy regulator <3>[ 10.373374] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <4>[ 10.421610] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 10.526202] tda998x 0-0070: found TDA19988 <3>[ 10.589541] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <3>[ 10.750012] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <3>[ 10.817910] davinci-mcasp 48038000.mcasp: IRQ common not found <3>[ 10.906187] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 11.056482] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <6>[ 11.089832] remoteproc remoteproc0: powering up wkup_m3 <4>[ 11.133417] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 11.143325] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 11.149541] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <6>[ 11.583861] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_driver_exit [tda998x]) <6>[ 11.632870] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 11.640063] random: crng init done <6>[ 11.713733] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 <6>[ 11.772921] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 11.782889] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <3>[ 12.008980] PM: Cannot get wkup_m3_ipc handle <6>[ 12.234015] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <6>[ 12.266687] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <6>[ 12.345353] omap-aes 53500000.aes: will run requests pump with realtime priority <6>[ 12.368123] omap-sham 53100000.sham: will run requests pump with realtime priority <3>[ 12.403318] PM: Cannot get wkup_m3_ipc handle <3>[ 12.456933] PM: Cannot get wkup_m3_ipc handle <3>[ 12.870051] PM: Cannot get wkup_m3_ipc handle <3>[ 12.900285] PM: Cannot get wkup_m3_ipc handle done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-994499/environment . /lava-994499/environment / # /lava-994499/bin/lava-test-runner /lava-994499/0 /lava-994499/bin/lava-test-runner /lava-994499/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-994499/0/tests/0_dmesg + cat uuid + UUID=994499_1.5.2.4.1 <8>[ 13.838883] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 13.904130] <8>[ 13.963525] <8>[ 14.022658] + set +x <8>[ 14.034419] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-994499/environment / # . /lava-994499/environment/lava-994499/bin/lava-test-runner /lava-994499/1 / # /lava-994499/bin/lava-test-runner /lava-994499/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-994499/1/tests/1_bootrr + cat uuid + UUID=994499_1.5.2.4.5 <8>[ 14.591407] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-994499/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto pm33xx /lava-994499/1/../bin/lava-test-case <8>[ 15.694835] /lava-994499/1/../bin/lava-test-case <8>[ 15.749192] /lava-994499/1/../bin/lava-test-case <8>[ 15.781810] /lava-994499/1/../bin/lava-test-case <8>[ 15.842933] /lava-994499/1/../bin/lava-test-case <8>[ 15.893758] /lava-994499/1/../bin/lava-test-case <8>[ 15.934300] /lava-994499/1/../bin/lava-test-case <8>[ 15.984786] /lava-994499/1/../bin/lava-test-case <8>[ 16.050166] /lava-994499/1/../bin/lava-test-case <8>[ 16.090602] /lava-994499/1/../bin/lava-test-case <8>[ 16.141266] /lava-994499/1/../bin/lava-test-case <8>[ 16.181858] /lava-994499/1/../bin/lava-test-case <8>[ 16.232048] /lava-994499/1/../bin/lava-test-case <8>[ 16.272058] /lava-994499/1/../bin/lava-test-case <8>[ 16.312172] /lava-994499/1/../bin/lava-test-case <8>[ 16.353060] /lava-994499/1/../bin/lava-test-case <8>[ 16.402576] /lava-994499/1/../bin/lava-test-case <8>[ 16.444311] /lava-994499/1/../bin/lava-test-case <8>[ 16.495277] /lava-994499/1/../bin/lava-test-case <8>[ 16.544219] /lava-994499/1/../bin/lava-test-case <8>[ 16.584813] /lava-994499/1/../bin/lava-test-case <8>[ 16.635234] /lava-994499/1/../bin/lava-test-case <8>[ 16.684967] /lava-994499/1/../bin/lava-test-case <8>[ 16.726191] /lava-994499/1/../bin/lava-test-case <8>[ 16.776889] /lava-994499/1/../bin/lava-test-case <8>[ 16.817804] /lava-994499/1/../bin/lava-test-case <8>[ 16.868034] /lava-994499/1/../bin/lava-test-case <8>[ 16.908292] /lava-994499/1/../bin/lava-test-case <8>[ 17.989973] /lava-994499/1/../bin/lava-test-case <8>[ 18.031220] /lava-994499/1/../bin/lava-test-case <8>[ 18.082075] /lava-994499/1/../bin/lava-test-case <8>[ 18.123935] /lava-994499/1/../bin/lava-test-case <8>[ 18.174122] /lava-994499/1/../bin/lava-test-case <8>[ 18.214865] /lava-994499/1/../bin/lava-test-case <8>[ 18.265317] /lava-994499/1/../bin/lava-test-case <8>[ 18.305343] /lava-994499/1/../bin/lava-test-case <8>[ 18.355949] /lava-994499/1/../bin/lava-test-case <8>[ 18.396098] /lava-994499/1/../bin/lava-test-case <8>[ 18.446842] /lava-994499/1/../bin/lava-test-case <8>[ 18.487289] /lava-994499/1/../bin/lava-test-case <8>[ 18.538128] /lava-994499/1/../bin/lava-test-case <8>[ 18.578434] /lava-994499/1/../bin/lava-test-case <8>[ 18.628832] /lava-994499/1/../bin/lava-test-case <8>[ 18.669493] /lava-994499/1/../bin/lava-test-case <8>[ 18.720002] /lava-994499/1/../bin/lava-test-case <8>[ 18.760514] /lava-994499/1/../bin/lava-test-case <8>[ 18.810497] /lava-994499/1/../bin/lava-test-case <8>[ 18.851608] /lava-994499/1/../bin/lava-test-case <8>[ 18.901860] /lava-994499/1/../bin/lava-test-case <8>[ 18.942761] /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found /lava-994499/1/../bin/lava-test-case <8>[ 18.985592] /lava-994499/1/../bin/lava-test-case <8>[ 19.036114] /lava-994499/1/../bin/lava-test-case <8>[ 19.083974] + set +x <8>[ 19.100513] / #