Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500) Trying to boot from MMC2 Loading Environment from EXT4... Card did not respond to voltage select! U-Boot 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500), Build: jenkins-github_Bootloader-Builder-131 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... Card did not respond to voltage select! Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.11.4 (3 ms) => setenv serverip 192.168.11.5 setenv serverip 192.168.11.5 => tftp 0x82000000 1010334/tftp-deploy-f8pc3l6v/kernel/zImage tftp 0x82000000 1010334/tftp-deploy-f8pc3l6v/kernel/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.4 Filename '1010334/tftp-deploy-f8pc3l6v/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 5.1 MiB/s done Bytes transferred = 4607176 (464cc8 hex) => tftp 0x83000000 1010334/tftp-deploy-f8pc3l6v/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1010334/tftp-deploy-f8pc3l6v/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.4 Filename '1010334/tftp-deploy-f8pc3l6v/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 5.1 MiB/s done Bytes transferred = 14171465 (d83d49 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1010334/tftp-deploy-f8pc3l6v/dtb/am335x-boneblack.dtb tftp 0x88000000 1010334/tftp-deploy-f8pc3l6v/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.4 Filename '1010334/tftp-deploy-f8pc3l6v/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *##### 4.6 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-09-19 13:11:18 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 14171401 Bytes = 13.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801256b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.195-cip38 (KernelCI@build-j50553-arm-gcc-10-omap2plus-defconfig-h2rdl) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Sep 19 12:38:23 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 20 pages/cpu s49740 r8192 d23988 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 472028K/522240K available (9216K kernel code, 1027K rwdata, 2176K rodata, 1024K init, 278K bss, 33828K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000012] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008344] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018565] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030219] Console: colour dummy device 80x30 <3>[ 0.035088] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042146] This ensures that you still see kernel messages. Please <3>[ 0.048870] update your kernel commandline. <6>[ 0.053472] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095544] CPU: Testing write buffer coherency: ok <6>[ 0.100924] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106388] pid_max: default: 32768 minimum: 301 <6>[ 0.111551] LSM: Security Framework initializing <6>[ 0.116649] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124464] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134129] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.140667] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.147873] rcu: Hierarchical SRCU implementation. <6>[ 0.153663] smp: Bringing up secondary CPUs ... <6>[ 0.158600] smp: Brought up 1 node, 1 CPU <6>[ 0.163027] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.169757] CPU: All CPU(s) started in SVC mode. <6>[ 0.175485] devtmpfs: initialized <6>[ 0.191176] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.199714] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.210149] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.218732] pinctrl core: initialized pinctrl subsystem <6>[ 0.226382] NET: Registered protocol family 16 <6>[ 0.233999] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.260720] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.266811] audit: initializing netlink subsys (disabled) <6>[ 0.273875] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.273890] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.280501] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.287223] cpuidle: using governor menu <5>[ 1.155970] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1 <6>[ 1.280067] No ATAGs? <6>[ 1.282692] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.306859] Kprobes globally optimized <6>[ 1.320113] iommu: Default domain type: Translated <6>[ 1.327139] vgaarb: loaded <5>[ 1.330834] SCSI subsystem initialized <6>[ 1.336124] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.341609] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.351331] PTP clock support registered <6>[ 1.356893] clocksource: Switched to clocksource dmtimer <5>[ 1.968552] VFS: Disk quotas dquot_6.6.0 <6>[ 1.972964] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 1.990024] NET: Registered protocol family 2 <6>[ 1.995090] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.003806] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.012768] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.021064] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.028745] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.035663] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.042692] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.050320] NET: Registered protocol family 1 <6>[ 2.056083] RPC: Registered named UNIX socket transport module. <6>[ 2.062546] RPC: Registered udp transport module. <6>[ 2.067675] RPC: Registered tcp transport module. <6>[ 2.072781] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.079710] PCI: CLS 0 bytes, default 64 <6>[ 2.084737] Trying to unpack rootfs image as initramfs... <6>[ 3.073094] Freeing initrd memory: 13840K <6>[ 3.078837] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.089236] Initialise system trusted keyrings <6>[ 3.094537] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 3.102808] NFS: Registering the id_resolver key type <5>[ 3.108415] Key type id_resolver registered <5>[ 3.112986] Key type id_legacy registered <6>[ 3.117458] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 3.125417] Key type asymmetric registered <5>[ 3.129961] Asymmetric key parser 'x509' registered <6>[ 3.135261] io scheduler mq-deadline registered <6>[ 3.140210] io scheduler kyber registered <3>[ 3.277420] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.286044] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.394083] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 3.435953] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 3.507364] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.515989] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 3.575640] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.584339] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 3.601757] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.610438] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 3.673593] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.682155] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 3.709350] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 3.723799] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <6>[ 3.734676] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 3.744104] printk: console [ttyS0] enabled <6>[ 3.744104] printk: console [ttyS0] enabled <6>[ 3.753168] printk: bootconsole [omap8250] disabled <6>[ 3.753168] printk: bootconsole [omap8250] disabled <6>[ 3.776778] brd: module loaded <6>[ 3.787644] loop: module loaded <3>[ 3.793097] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 3.856870] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 3.900022] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 3.909929] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 3.916583] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 3.922413] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) <6>[ 3.929975] cpsw 4a100000.ethernet: Detected MACID = 64:cf:d9:3f:a0:d5 <6>[ 3.938977] i2c /dev entries driver <5>[ 3.944462] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 3.952382] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.958922] sdhci: Copyright(c) Pierre Ossman <6>[ 3.964270] sdhci-pltfm: SDHCI platform and OF driver helper <4>[ 3.972587] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.982410] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.990889] Initializing XFRM netlink socket <6>[ 3.995689] NET: Registered protocol family 10 <6>[ 4.002124] Segment Routing with IPv6 <6>[ 4.006173] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.013237] NET: Registered protocol family 17 <6>[ 4.018091] NET: Registered protocol family 15 <5>[ 4.022940] Key type dns_resolver registered <6>[ 4.028144] oprofile: using arm/armv7 <6>[ 4.032186] ThumbEE CPU extension supported. <5>[ 4.036759] Registering SWP/SWPB emulation handler <3>[ 4.042323] omap_voltage_late_init: Voltage driver support not added <3>[ 4.049045] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize <3>[ 4.057460] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize <6>[ 4.066115] SmartReflex Class3 initialized <6>[ 4.071091] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <5>[ 4.080018] Loading compiled-in X.509 certificates <6>[ 4.105218] OMAP GPIO hardware version 0.1 <4>[ 4.137764] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.151424] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.159971] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.166328] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.176375] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 4.187780] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.196894] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.202066] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.215944] mmc1: new high speed MMC card at address 0001 <6>[ 4.222804] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 4.228421] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 4.235086] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 4.241695] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (249:0) <6>[ 4.251223] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.260214] mmcblk1: p1 <6>[ 4.268529] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 4.358398] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 7.487520] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.496874] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.527013] Sending DHCP requests ., OK <6>[ 7.570967] IP-Config: Got DHCP answer from 192.168.11.1, my address is 192.168.11.4 <6>[ 7.579040] IP-Config: Complete: <6>[ 7.582550] device=eth0, hwaddr=64:cf:d9:3f:a0:d5, ipaddr=192.168.11.4, mask=255.255.255.0, gw=192.168.11.1 <6>[ 7.593048] host=192.168.11.4, domain=usen.ad.jp, nis-domain=(none) <6>[ 7.600057] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= <6>[ 7.600064] nameserver0=192.168.11.1 <6>[ 7.613555] Freeing unused kernel memory: 1024K <6>[ 7.637331] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.873212] udevd[100]: starting version 3.2.9 <5>[ 7.879968] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 7.887889] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 7.894787] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 7.912096] udevd[100]: specified user 'tss' unknown <27>[ 7.917986] udevd[100]: specified group 'tss' unknown <30>[ 7.929649] udevd[101]: starting eudev-3.2.9 <4>[ 8.794320] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 8.803580] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 8.887095] usbcore: registered new interface driver usbfs <6>[ 8.892959] usbcore: registered new interface driver hub <6>[ 8.898724] usbcore: registered new device driver usb <6>[ 8.994856] remoteproc remoteproc0: wkup_m3 is available <4>[ 9.031741] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 9.040937] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 9.327460] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 9.333117] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 9.567363] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 9.575980] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 9.583581] usb usb1: Product: MUSB HDRC host driver <6>[ 9.588859] usb usb1: Manufacturer: Linux 5.10.195-cip38 musb-hcd <6>[ 9.595242] usb usb1: SerialNumber: musb-hdrc.1 <4>[ 9.795536] at24 0-0050: supply vcc not found, using dummy regulator <3>[ 9.851453] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 9.898646] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <6>[ 9.997535] hub 1-0:1.0: USB hub found <6>[ 10.001875] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <4>[ 10.009554] at24 2-0054: supply vcc not found, using dummy regulator <6>[ 10.047117] hub 1-0:1.0: 1 port detected <4>[ 10.080219] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <3>[ 10.104395] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 10.177751] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 10.183173] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) <4>[ 10.197622] at24 2-0055: supply vcc not found, using dummy regulator <3>[ 10.205650] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 10.217530] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <4>[ 10.307780] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 10.394719] at24 2-0057: supply vcc not found, using dummy regulator <3>[ 10.472852] davinci-mcasp 48038000.mcasp: IRQ common not found <6>[ 10.546957] tda998x 0-0070: found TDA19988 <3>[ 10.571542] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <3>[ 10.752697] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 10.993777] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <6>[ 11.017358] remoteproc remoteproc0: powering up wkup_m3 <4>[ 11.023040] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 11.032937] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 11.039181] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <6>[ 11.659805] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_driver_exit [tda998x]) <6>[ 11.702593] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 11.721954] random: crng init done <6>[ 11.754569] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 <6>[ 11.803363] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 11.812798] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <3>[ 11.905585] PM: Cannot get wkup_m3_ipc handle <6>[ 12.109923] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <6>[ 12.197334] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <6>[ 12.215687] omap-sham 53100000.sham: will run requests pump with realtime priority <6>[ 12.293889] omap-aes 53500000.aes: will run requests pump with realtime priority <3>[ 12.330565] PM: Cannot get wkup_m3_ipc handle <3>[ 12.355312] PM: Cannot get wkup_m3_ipc handle <3>[ 12.845538] PM: Cannot get wkup_m3_ipc handle <3>[ 12.879958] PM: Cannot get wkup_m3_ipc handle done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1010334/environment . /lava-1010334/environment / # /lava-1010334/bin/lava-test-runner /lava-1010334/0 /lava-1010334/bin/lava-test-runner /lava-1010334/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1010334/0/tests/0_dmesg + cat uuid + UUID=1010334_1.5.2.4.1 <8>[ 13.756229] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 13.822236] <8>[ 13.882691] <8>[ 13.943563] + set +x <8>[ 13.954734] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1010334/environment / # . /lava-1010334/environment/lava-1010334/bin/lava-test-runner /lava-1010334/1 / # /lava-1010334/bin/lava-test-runner /lava-1010334/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1010334/1/tests/1_bootrr + cat uuid + UUID=1010334_1.5.2.4.5 <8>[ 14.481614] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1010334/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto pm33xx /lava-1010334/1/../bin/lava-test-case <8>[ 15.587257] /lava-1010334/1/../bin/lava-test-case <8>[ 15.641680] /lava-1010334/1/../bin/lava-test-case <8>[ 15.674230] /lava-1010334/1/../bin/lava-test-case <8>[ 15.735907] /lava-1010334/1/../bin/lava-test-case <8>[ 15.787246] /lava-1010334/1/../bin/lava-test-case <8>[ 15.827950] /lava-1010334/1/../bin/lava-test-case <8>[ 15.878988] /lava-1010334/1/../bin/lava-test-case <8>[ 15.928573] /lava-1010334/1/../bin/lava-test-case <8>[ 15.985982] /lava-1010334/1/../bin/lava-test-case <8>[ 16.036520] /lava-1010334/1/../bin/lava-test-case <8>[ 16.077562] /lava-1010334/1/../bin/lava-test-case <8>[ 16.128121] /lava-1010334/1/../bin/lava-test-case <8>[ 16.168403] /lava-1010334/1/../bin/lava-test-case <8>[ 16.208651] /lava-1010334/1/../bin/lava-test-case <8>[ 16.249704] /lava-1010334/1/../bin/lava-test-case <8>[ 16.299721] /lava-1010334/1/../bin/lava-test-case <8>[ 16.341271] /lava-1010334/1/../bin/lava-test-case <8>[ 16.391965] /lava-1010334/1/../bin/lava-test-case <8>[ 16.441567] /lava-1010334/1/../bin/lava-test-case <8>[ 16.482580] /lava-1010334/1/../bin/lava-test-case <8>[ 16.533599] /lava-1010334/1/../bin/lava-test-case <8>[ 16.584683] /lava-1010334/1/../bin/lava-test-case <8>[ 16.626260] /lava-1010334/1/../bin/lava-test-case <8>[ 16.677435] /lava-1010334/1/../bin/lava-test-case <8>[ 16.718937] /lava-1010334/1/../bin/lava-test-case <8>[ 16.769306] /lava-1010334/1/../bin/lava-test-case <8>[ 16.809865] /lava-1010334/1/../bin/lava-test-case <8>[ 17.887394] /lava-1010334/1/../bin/lava-test-case <8>[ 17.928791] /lava-1010334/1/../bin/lava-test-case <8>[ 17.980004] /lava-1010334/1/../bin/lava-test-case <8>[ 18.021369] /lava-1010334/1/../bin/lava-test-case <8>[ 18.071826] /lava-1010334/1/../bin/lava-test-case <8>[ 18.112310] /lava-1010334/1/../bin/lava-test-case <8>[ 18.163661] /lava-1010334/1/../bin/lava-test-case <8>[ 18.204345] /lava-1010334/1/../bin/lava-test-case <8>[ 18.255556] /lava-1010334/1/../bin/lava-test-case <8>[ 18.296208] /lava-1010334/1/../bin/lava-test-case <8>[ 18.347440] /lava-1010334/1/../bin/lava-test-case <8>[ 18.387964] /lava-1010334/1/../bin/lava-test-case <8>[ 18.439036] /lava-1010334/1/../bin/lava-test-case <8>[ 18.479617] /lava-1010334/1/../bin/lava-test-case <8>[ 18.530939] /lava-1010334/1/../bin/lava-test-case <8>[ 18.571964] /lava-1010334/1/../bin/lava-test-case <8>[ 18.622289] /lava-1010334/1/../bin/lava-test-case <8>[ 18.663170] /lava-1010334/1/../bin/lava-test-case <8>[ 18.713328] /lava-1010334/1/../bin/lava-test-case <8>[ 18.754558] /lava-1010334/1/../bin/lava-test-case <8>[ 18.805327] /lava-1010334/1/../bin/lava-test-case <8>[ 18.846361] /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found /lava-1010334/1/../bin/lava-test-case <8>[ 18.889398] /lava-1010334/1/../bin/lava-test-case <8>[ 18.940215] /lava-1010334/1/../bin/lava-test-case <8>[ 18.988134] + set +x <8>[ 19.004963] / #