[Enter `^Ec?' for help] U-Boot SPL 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45) U-Boot 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45 +0000) Model: Radxa Rock 2 Square DRAM: 2 GiB MMC: dwmmc@ff0c0000: 0, dwmmc@ff0f0000: 1 In: serial@ff690000 Out: serial@ff690000 Err: serial@ff690000 Incorrect eeprom header Net: eth0: ethernet@ff290000 Hit any key to stop autoboot: 1  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp ethernet@ff290000 Waiting for PHY auto negotiation to complete...... done Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.201.22 (762 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x2000000 12269434/tftp-deploy-8f8a8blu/kernel/zImage tftp 0x2000000 12269434/tftp-deploy-8f8a8blu/kernel/zImage Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '12269434/tftp-deploy-8f8a8blu/kernel/zImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############ 3.6 MiB/s done Bytes transferred = 9708032 (942200 hex) => tftp 0x4000000 12269434/tftp-deploy-8f8a8blu/ramdisk/ramdisk.cpio.gz.uboot tftp 0x4000000 12269434/tftp-deploy-8f8a8blu/ramdisk/ramdisk.cpio.gz.uboot Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '12269434/tftp-deploy-8f8a8blu/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x4000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 3.7 MiB/s done Bytes transferred = 16078079 (f554ff hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x1f00000 12269434/tftp-deploy-8f8a8blu/dtb/rk3288-rock2-square.dtb tftp 0x1f00000 12269434/tftp-deploy-8f8a8blu/dtb/rk3288-rock2-square.dtb Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '12269434/tftp-deploy-8f8a8blu/dtb/rk3288-rock2-square.dtb'. Load address: 0x1f00000 Loading: *### 3.3 MiB/s done Bytes transferred = 41652 (a2b4 hex) => setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x2000000 0x4000000 0x1f00000 bootz 0x2000000 0x4000000 0x1f00000 Kernel image @ 0x2000000 [ 0x000000 - 0x942200 ] ## Loading init Ramdisk from Legacy Image at 04000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 16078015 Bytes = 15.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Using Device Tree in place at 01f00000, end 01f0d2b3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x500 [ 0.000000] Linux version 5.10.201-cip41 (KernelCI@build-j47770-arm-gcc-10-multi-v7-defconfig-npjx6) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Dec 14 11:49:41 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Radxa Rock 2 Square [ 0.000000] earlycon: uart0 at MMIO32 0xff690000 (options '115200n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 1973028K/2097152K available (14336K kernel code, 2239K rwdata, 5364K rodata, 2048K init, 424K bss, 58588K reserved, 65536K cma-reserved, 1245184K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.009082] Switching to timer-based delay loop, resolution 41ns <6>[ 0.022772] Console: colour dummy device 80x30 <6>[ 0.027975] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.039643] CPU: Testing write buffer coherency: ok <6>[ 0.045315] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.051155] pid_max: default: 32768 minimum: 301 <6>[ 0.056647] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.064980] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.074684] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500 <6>[ 0.082098] Setting up static identity map for 0x300000 - 0x3000ac <6>[ 0.091189] rcu: Hierarchical SRCU implementation. <6>[ 0.101485] EFI services will not be available. <6>[ 0.107052] smp: Bringing up secondary CPUs ... <6>[ 0.114047] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501 <6>[ 0.114056] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.128309] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502 <6>[ 0.128318] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.142514] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503 <6>[ 0.142523] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.154994] smp: Brought up 1 node, 4 CPUs <6>[ 0.159805] SMP: Total of 4 processors activated (192.00 BogoMIPS). <6>[ 0.166967] CPU: All CPU(s) started in SVC mode. <6>[ 0.172953] devtmpfs: initialized <6>[ 0.186045] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0 <6>[ 0.194984] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.206096] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.215779] pinctrl core: initialized pinctrl subsystem <6>[ 0.223813] DMI not present or invalid. <6>[ 0.229157] NET: Registered protocol family 16 <6>[ 0.236738] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.247208] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.247734] cpuidle: using governor menu <6>[ 0.259800] No ATAGs? <6>[ 0.262723] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.271821] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.281909] Serial: AMBA PL011 UART driver <6>[ 0.386705] iommu: Default domain type: Translated <6>[ 0.393926] vgaarb: loaded <5>[ 0.398186] SCSI subsystem initialized <6>[ 0.403046] usbcore: registered new interface driver usbfs <6>[ 0.409427] usbcore: registered new interface driver hub <6>[ 0.415583] usbcore: registered new device driver usb <6>[ 0.423406] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.429141] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.439483] PTP clock support registered <6>[ 0.447470] clocksource: Switched to clocksource arch_sys_counter <6>[ 1.842663] NET: Registered protocol family 2 <6>[ 1.848004] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 1.857827] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 1.867317] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 1.876201] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 1.884523] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 1.891898] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.899536] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.907768] NET: Registered protocol family 1 <6>[ 1.913408] RPC: Registered named UNIX socket transport module. <6>[ 1.920236] RPC: Registered udp transport module. <6>[ 1.925690] RPC: Registered tcp transport module. <6>[ 1.931159] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.938534] PCI: CLS 0 bytes, default 64 <6>[ 1.943566] Trying to unpack rootfs image as initramfs... <6>[ 3.489749] Freeing initrd memory: 15704K <6>[ 3.495329] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available <5>[ 3.506156] Initialise system trusted keyrings <6>[ 3.511587] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 3.525402] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.532880] NFS: Registering the id_resolver key type <5>[ 3.538818] Key type id_resolver registered <5>[ 3.543694] Key type id_legacy registered <6>[ 3.548520] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.556163] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.564616] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.570198] Key type asymmetric registered <5>[ 3.574982] Asymmetric key parser 'x509' registered <6>[ 3.580707] bounce: pool size: 64 pages <6>[ 3.585243] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.593668] io scheduler mq-deadline registered <6>[ 3.598939] io scheduler kyber registered <6>[ 3.643525] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 3.652164] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 <6>[ 3.663373] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 3.672015] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10 <6>[ 3.753422] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 3.763707] printk: console [ttyS2] disabled <6>[ 3.768783] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 43, base_baud = 1500000) is a 16550A <6>[ 3.778983] printk: console [ttyS2] enabled <6>[ 3.778983] printk: console [ttyS2] enabled <6>[ 3.788965] printk: bootconsole [uart0] disabled <6>[ 3.788965] printk: bootconsole [uart0] disabled <6>[ 3.802645] SuperH (H)SCI(F) driver initialized <6>[ 3.809529] msm_serial: driver initialized <6>[ 3.814652] STMicroelectronics ASC driver initialized <6>[ 3.822549] STM32 USART driver initialized <6>[ 3.846372] brd: module loaded <6>[ 3.856933] loop: module loaded <6>[ 3.876505] CAN device driver interface <6>[ 3.882458] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 3.890740] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 3.896584] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 3.903587] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 3.909940] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 3.920092] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 3.927396] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <6>[ 3.937936] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 3.946546] usbcore: registered new interface driver pegasus <6>[ 3.953235] usbcore: registered new interface driver asix <6>[ 3.959631] usbcore: registered new interface driver ax88179_178a <6>[ 3.966773] usbcore: registered new interface driver cdc_ether <6>[ 3.973655] usbcore: registered new interface driver smsc75xx <6>[ 3.980441] usbcore: registered new interface driver smsc95xx <6>[ 3.987187] usbcore: registered new interface driver net1080 <6>[ 3.993868] usbcore: registered new interface driver cdc_subset <6>[ 4.000834] usbcore: registered new interface driver zaurus <6>[ 4.007464] usbcore: registered new interface driver cdc_ncm <4>[ 4.017101] dwc2 ff540000.usb: supply vusb_d not found, using dummy regulator <4>[ 4.025540] dwc2 ff540000.usb: supply vusb_a not found, using dummy regulator <6>[ 4.097778] dwc2 ff540000.usb: DWC OTG Controller <6>[ 4.103355] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1 <6>[ 4.111594] dwc2 ff540000.usb: irq 48, io mem 0xff540000 <6>[ 4.118611] hub 1-0:1.0: USB hub found <6>[ 4.123141] hub 1-0:1.0: 1 port detected <4>[ 4.128651] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator <4>[ 4.137074] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator <6>[ 4.287509] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM <6>[ 4.296072] dwc2 ff580000.usb: DWC OTG Controller <6>[ 4.301690] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2 <6>[ 4.309926] dwc2 ff580000.usb: irq 49, io mem 0xff580000 <6>[ 4.316898] hub 2-0:1.0: USB hub found <6>[ 4.321451] hub 2-0:1.0: 1 port detected <6>[ 4.327772] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 4.335366] ehci-pci: EHCI PCI platform driver <6>[ 4.340690] ehci-platform: EHCI generic platform driver <6>[ 4.347164] ehci-platform ff500000.usb: EHCI Host Controller <6>[ 4.353837] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3 <6>[ 4.363146] ehci-platform ff500000.usb: irq 47, io mem 0xff500000 <6>[ 4.397465] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00 <6>[ 4.405397] hub 3-0:1.0: USB hub found <6>[ 4.409952] hub 3-0:1.0: 1 port detected <6>[ 4.415304] ehci-orion: EHCI orion driver <6>[ 4.420345] SPEAr-ehci: EHCI SPEAr driver <6>[ 4.425315] ehci-st: EHCI STMicroelectronics driver <6>[ 4.431284] ehci-exynos: EHCI Exynos driver <6>[ 4.436450] ehci-atmel: EHCI Atmel driver <6>[ 4.441440] tegra-ehci: Tegra EHCI driver <6>[ 4.446436] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 4.453673] ohci-pci: OHCI PCI platform driver <6>[ 4.459000] ohci-platform: OHCI generic platform driver <6>[ 4.465387] SPEAr-ohci: OHCI SPEAr driver <6>[ 4.470376] ohci-st: OHCI STMicroelectronics driver <6>[ 4.476313] ohci-atmel: OHCI Atmel driver <6>[ 4.482428] usbcore: registered new interface driver usb-storage <6>[ 4.497041] i2c /dev entries driver <6>[ 4.507490] VCC_DDR: supplied by vcc_sys <6>[ 4.514495] VCC_IO: supplied by vcc_sys <6>[ 4.521385] VDD_LOG: Bringing 1100000uV into 1000000-1000000uV <6>[ 4.530592] VDD_LOG: supplied by vcc_sys <6>[ 4.537551] VCC_20: supplied by vcc_sys <6>[ 4.544442] VCCIO_SD: supplied by VCC_IO <6>[ 4.551944] VDD10_LCD: supplied by VCC_IO <6>[ 4.559895] VCCA_CODEC: supplied by VCC_IO <6>[ 4.567924] VCCA_TP: supplied by vcc_sys <6>[ 4.575282] VCCIO_PMU: supplied by vcc_sys <6>[ 4.582480] VDD_10: supplied by VCC_20 <6>[ 4.589762] VCC_18: supplied by VCC_20 <6>[ 4.597064] VCC18_LCD: supplied by VCC_20 <6>[ 4.606175] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! <6>[ 4.615581] vdd_cpu: supplied by vcc_sys <6>[ 4.622919] vcc_flash: supplied by VCC_IO <6>[ 4.628287] vcc_sd: supplied by VCC_IO <6>[ 4.635095] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! <6>[ 4.644495] vdd_gpu: supplied by vcc_sys <4>[ 4.667601] dw_wdt ff800000.watchdog: No valid TOPs array specified <6>[ 4.684126] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 500000 KHz, changing to: 600000 KHz <6>[ 4.698596] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.705794] sdhci: Copyright(c) Pierre Ossman <6>[ 4.711787] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.719446] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.719448] dwmmc_rockchip ff0c0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.719476] dwmmc_rockchip ff0c0000.mmc: Using internal DMA controller. <6>[ 4.727609] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.727827] dwmmc_rockchip ff0f0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.727847] dwmmc_rockchip ff0f0000.mmc: Using internal DMA controller. <6>[ 4.727852] dwmmc_rockchip ff0f0000.mmc: Version ID is 270a <6>[ 4.727874] dwmmc_rockchip ff0f0000.mmc: DW MMC controller at irq 40,32 bit host data width,256 deep fifo <6>[ 4.728521] dwmmc_rockchip ff0f0000.mmc: allocated mmc-pwrseq <6>[ 4.728525] mmc_host mmc0: card is non-removable. <6>[ 4.734244] dwmmc_rockchip ff0c0000.mmc: Version ID is 270a <6>[ 4.741624] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 4.741929] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 4.750090] dwmmc_rockchip ff0c0000.mmc: DW MMC controller at irq 38,32 bit host data width,256 deep fifo <6>[ 4.758240] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 4.766030] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.772444] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 4.783794] usbcore: registered new interface driver usbhid <6>[ 4.844994] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 4.855949] usbhid: USB HID core driver <6>[ 4.879563] NET: Registered protocol family 10 <6>[ 4.885040] usb 3-1: new high-speed USB device number 2 using ehci-platform <6>[ 4.893270] Segment Routing with IPv6 <6>[ 4.897703] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.904837] NET: Registered protocol family 17 <6>[ 4.910102] can: controller area network core <6>[ 4.915276] NET: Registered protocol family 29 <6>[ 4.920532] can: raw protocol <6>[ 4.924133] can: broadcast manager protocol <6>[ 4.929093] can: netlink gateway - max_hops=1 <5>[ 4.934393] Key type dns_resolver registered <6>[ 4.939484] ThumbEE CPU extension supported. <5>[ 4.944543] Registering SWP/SWPB emulation handler <5>[ 4.950343] Loading compiled-in X.509 certificates <6>[ 4.974210] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 4.981527] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <6>[ 4.989640] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input). <6>[ 4.997851] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30). <6>[ 5.004474] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10). <6>[ 5.011121] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no). <3>[ 5.018376] rk_gmac-dwmac ff290000.ethernet: cannot get clock clk_mac_speed <6>[ 5.026454] rk_gmac-dwmac ff290000.ethernet: clock input from PHY <6>[ 5.038587] rk_gmac-dwmac ff290000.ethernet: init for RGMII <6>[ 5.045466] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35 <6>[ 5.053761] rk_gmac-dwmac ff290000.ethernet: DWMAC1000 <6>[ 5.059910] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported <6>[ 5.068576] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported <6>[ 5.077231] rk_gmac-dwmac ff290000.ethernet: COE Type 2 <6>[ 5.083370] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported <6>[ 5.091555] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported <6>[ 5.099105] rk_gmac-dwmac ff290000.ethernet: Normal descriptors <6>[ 5.106012] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled <6>[ 5.112840] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer <6>[ 5.151089] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 5.163451] mmc0: new high speed MMC card at address 0001 <6>[ 5.170252] mmcblk0: mmc0:0001 032GE4 29.1 GiB <6>[ 5.175916] mmcblk0boot0: mmc0:0001 032GE4 partition 1 4.00 MiB <6>[ 5.183155] mmcblk0boot1: mmc0:0001 032GE4 partition 2 4.00 MiB <6>[ 5.190274] mmcblk0rpmb: mmc0:0001 032GE4 partition 3 4.00 MiB, chardev (235:0) <6>[ 5.200102] hub 3-1:1.0: USB hub found <6>[ 5.204992] hub 3-1:1.0: 4 ports detected <6>[ 5.212158] mmcblk0: p1 p2 <6>[ 5.234728] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) <6>[ 5.249038] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) <3>[ 5.267499] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! <6>[ 5.267577] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <3>[ 5.276549] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! <3>[ 5.293773] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! <6>[ 5.302951] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 5.303248] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 5.310647] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 5.324938] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 5.338512] rk_gmac-dwmac ff290000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) <6>[ 5.351748] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 5.359958] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 5.367452] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found <6>[ 5.367668] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <4>[ 5.376395] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW <6>[ 5.382928] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 5.401927] rk_gmac-dwmac ff290000.ethernet eth0: configuring for phy/rgmii link mode <6>[ 9.578815] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 9.608349] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 9.637466] Sending DHCP requests ., OK <6>[ 9.702380] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.22 <6>[ 9.711749] IP-Config: Complete: <6>[ 9.715715] device=eth0, hwaddr=4a:01:9c:e5:04:ff, ipaddr=192.168.201.22, mask=255.255.255.0, gw=192.168.201.1 <6>[ 9.727773] host=rk3288-rock2-square-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 9.736730] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 9.736732] nameserver0=192.168.201.1 <4>[ 9.750380] dw-apb-uart ff690000.serial: forbid DMA for kernel console <6>[ 9.759038] Freeing unused kernel memory: 2048K <6>[ 9.809116] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 9.885091] udevd[116]: starting version 3.2.9 <5>[ 9.890952] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 9.898588] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 9.906133] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 9.916654] udevd[116]: specified user 'tss' unknown <27>[ 9.922676] udevd[116]: specified group 'tss' unknown <30>[ 9.929457] udevd[117]: starting eudev-3.2.9 <6>[ 10.080492] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 10.092224] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 10.099934] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 10.106466] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 10.139174] rockchip-vop ff930000.vop: Adding to iommu group 0 <6>[ 10.146286] rockchip-vop ff940000.vop: Adding to iommu group 1 <6>[ 10.148059] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 10.181404] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 10.181467] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 10.189106] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 10.189121] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 10.217288] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 10.218940] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 10.219389] rk3288-crypto ff8a0000.crypto: will run requests pump with realtime priority <6>[ 10.245448] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY) <6>[ 10.263406] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 10.271115] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 10.277651] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <4>[ 10.278315] rtc-hym8563 0-0051: no valid clock/calendar values available <6>[ 10.282380] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) <6>[ 10.316760] panfrost ffa30000.gpu: clock rate = 400000000 <6>[ 10.318936] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 10.323815] rk3288-crypto ff8a0000.crypto: Crypto Accelerator successfully registered <6>[ 10.330223] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 10.331537] rtc-hym8563 0-0051: registered as rtc0 <6>[ 10.331612] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 <6>[ 10.363811] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <4>[ 10.364871] rtc-hym8563 0-0051: no valid clock/calendar values available <6>[ 10.371513] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 10.371531] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <3>[ 10.379302] rtc-hym8563 0-0051: hctosys: unable to read the hardware clock <6>[ 10.413295] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 10.421811] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 10.429529] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 10.436058] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 10.450986] dwmmc_rockchip ff0d0000.mmc: allocated mmc-pwrseq <6>[ 10.457735] mmc_host mmc2: card is non-removable. <6>[ 10.477512] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 10.501566] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1 <6>[ 10.510548] panfrost ffa30000.gpu: features: 00000000,100277bf, issues: 00000000,24040400 <4>[ 10.517890] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) <6>[ 10.519996] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 <4>[ 10.528608] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) <6>[ 10.539915] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1 <6>[ 10.540711] [drm] Initialized panfrost 1.1.0 20180908 for ffa30000.gpu on minor 1 <4>[ 10.547862] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) <4>[ 10.571493] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) done <6>[ 10.633884] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Saving random seed: <6>[ 10.648624] mmc2: new high speed SDIO card at address 0001 OK Starting network: ip: RTNETLINK answers: File exists <5>[ 10.674190] cfg80211: Loading compiled-in X.509 certificates for regulatory database FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # <5>[ 10.709038] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 10.716687] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 10.726631] cfg80211: failed to load regulatory.db <6>[ 10.735843] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 <4>[ 10.745823] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed wit h error -2 / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-12269434/environment . /lava-12269434/environment / # /lava-12269434/bin/lava-test-runner /lava-12269434/0 /lava-12269434/bin/lava-test-runner /lava-12269434/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-12269434/0/tests/0_dmesg<8>[ 11.297189] + cat uuid + UUID=12269434_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 11.327877] <6>[ 11.337500] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <8>[ 11.350253] <8>[ 11.370339] + set +x <8>[ 11.380671] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-12269434/environment / # . /lava-12269434/environment/lava-12269434/bin/lava-test-runner /lava-12269434/1 / # <3>[ 11.758424] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 /lava-12269434/bin/lava-test-runner /lava-12269434/1 + export 'TESTRUN_ID=1_bootrr' + <8>[ 11.857068] cd /lava-12269434/1/tests/1_bootrr + cat uuid + UUID=12269434_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-12269434/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-<8>[ 11.888635] 12269434/1/../bin/lava-test-case /lava-12269434/1/../bin/lava-test-case <8>[ 11.914705] /lava-12269434/1/../bin/lava-test-case <8>[ 11.930723] /lava-12269434/1/../bin/lava-test-case <8>[ 11.955427] /lava-12269434/1/../bin/lava-test-case <8>[ 11.977613] /lava-12269434/1/../bin/lava-test-case <8>[ 11.996178] /lava-12269434/1/../bin/lava-test-case <8>[ 12.018864] /lava-12269434/1/../bin/lava-test-case <8>[ 12.038524] /lava-12269434/1/../bin/lava-test-case <8>[ 12.059655] + set +x <8>[ 12.068429] / #