connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1027853/tftp-deploy-m81oak8k/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1027853/tftp-deploy-m81oak8k/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1027853/tftp-deploy-m81oak8k/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1027853/tftp-deploy-m81oak8k/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1027853/tftp-deploy-m81oak8k/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1027853/tftp-deploy-m81oak8k/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address a6:a3:17:9b:5a:2f T eth0: DHCP client bound to address 10.8.254.148 Loading ARM Linux zImage '/mnt/tftp/1027853/tftp-deploy-m81oak8k/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x13bde000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1027853/tftp-deploy-m81oak8k/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x192605bb Loading devicetree from '/mnt/tftp/1027853/tftp-deploy-m81oak8k/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x13bde000, initrd at 0x18000000, oftree at 0x19261000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.210-cip44 (KernelCI@build-j118011-arm-gcc-10-multi-v7-defconfig-kselftest-4vv2x) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Fri Feb 23 09:52:57 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 21 pages/cpu s55468 r8192 d22356 u86016 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1956980K/2097152K available (17408K kernel code, 2714K rwdata, 8144K rodata, 2048K init, 6693K bss, 74636K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 56146 entries in 165 pages [ 0.000000] ftrace: allocated 165 pages with 4 groups [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000009] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000045] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.004627] Console: colour dummy device 80x30 [ 0.004693] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.004723] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.004751] ... MAX_LOCK_DEPTH: 48 [ 0.004777] ... MAX_LOCKDEP_KEYS: 8192 [ 0.004803] ... CLASSHASH_SIZE: 4096 [ 0.004829] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.004854] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.004879] ... CHAINHASH_SIZE: 32768 [ 0.004904] memory used by lock dependency info: 4061 kB [ 0.004931] memory used for stack traces: 2112 kB [ 0.004957] per task-struct memory footprint: 1536 bytes [ 0.005062] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.005114] CPU: Testing write buffer coherency: ok [ 0.005253] CPU0: Spectre v2: using BPIALL workaround [ 0.005285] pid_max: default: 32768 minimum: 301 [ 0.005631] LSM: Security Framework initializing [ 0.005748] LSM support for eBPF active [ 0.005893] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005944] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.009661] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.013163] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.015603] rcu: Hierarchical SRCU implementation. [ 0.024692] EFI services will not be available. [ 0.025865] smp: Bringing up secondary CPUs ... [ 0.028735] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.028753] CPU1: Spectre v2: using BPIALL workaround [ 0.032261] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.032276] CPU2: Spectre v2: using BPIALL workaround [ 0.035337] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.035352] CPU3: Spectre v2: using BPIALL workaround [ 0.036025] smp: Brought up 1 node, 4 CPUs [ 0.036064] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.036096] CPU: All CPU(s) started in SVC mode. [ 0.038726] devtmpfs: initialized [ 0.084959] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.087418] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.087492] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.092469] pinctrl core: initialized pinctrl subsystem [ 0.099047] DMI not present or invalid. [ 0.101294] NET: Registered protocol family 16 [ 0.110718] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.119478] thermal_sys: Registered thermal governor 'step_wise' [ 0.119997] cpuidle: using governor menu [ 0.120493] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.659633] vdd1p1: supplied by regulator-dummy [ 0.687338] vdd3p0: supplied by regulator-dummy [ 0.714745] vdd2p5: supplied by regulator-dummy [ 0.742066] vddarm: supplied by regulator-dummy [ 0.770361] vddpu: supplied by regulator-dummy [ 0.796909] vddsoc: supplied by regulator-dummy [ 2.034577] No ATAGs? [ 2.035142] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 2.035222] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 2.051443] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 2.076187] Serial: AMBA PL011 UART driver [ 2.130829] Kprobes globally optimized [ 2.219555] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.pinctrl; cannot claim for regulator-usbotgvbus [ 2.219603] imx6q-pinctrl 20e0000.pinctrl: pin-42 (regulator-usbotgvbus) status -22 [ 2.219641] imx6q-pinctrl 20e0000.pinctrl: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.pinctrl [ 2.219674] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 2.219793] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 2.229993] iommu: Default domain type: Translated [ 2.231583] vgaarb: loaded [ 2.235843] SCSI subsystem initialized [ 2.237833] usbcore: registered new interface driver usbfs [ 2.238103] usbcore: registered new interface driver hub [ 2.238337] usbcore: registered new device driver usb [ 2.243444] i2c i2c-0: IMX I2C adapter registered [ 2.251125] i2c i2c-1: IMX I2C adapter registered [ 2.256458] i2c i2c-2: IMX I2C adapter registered [ 2.260540] pps_core: LinuxPPS API ver. 1 registered [ 2.260577] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.260667] PTP clock support registered [ 2.275814] clocksource: Switched to clocksource mxc_timer1 [ 3.966652] NET: Registered protocol family 2 [ 3.967300] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 3.970291] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear) [ 3.970472] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 3.970678] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear) [ 3.972117] TCP: Hash tables configured (established 8192 bind 8192) [ 3.973228] MPTCP token hash table entries: 1024 (order: 3, 49152 bytes, linear) [ 3.973556] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 3.973812] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 3.974547] NET: Registered protocol family 1 [ 3.977292] RPC: Registered named UNIX socket transport module. [ 3.977379] RPC: Registered udp transport module. [ 3.977411] RPC: Registered tcp transport module. [ 3.977443] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.977494] NET: Registered protocol family 44 [ 3.977560] PCI: CLS 0 bytes, default 64 [ 3.979995] Trying to unpack rootfs image as initramfs... [ 6.468518] Freeing initrd memory: 18820K [ 6.469290] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 6.471279] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 6.479512] Initialise system trusted keyrings [ 6.480573] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 6.525192] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 6.528875] NFS: Registering the id_resolver key type [ 6.529073] Key type id_resolver registered [ 6.529155] Key type id_legacy registered [ 6.529735] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 6.529837] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 6.530037] ntfs: driver 2.1.32 [Flags: R/O]. [ 6.531973] Key type asymmetric registered [ 6.532104] Asymmetric key parser 'x509' registered [ 6.532501] bounce: pool size: 64 pages [ 6.532667] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 6.532775] io scheduler mq-deadline registered [ 6.532814] io scheduler kyber registered [ 6.533680] test_firmware: interface ready [ 6.680410] mxs-dma 110000.dma-controller: initialized [ 6.736873] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 6.737129] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware [ 6.956729] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 6.974844] SuperH (H)SCI(F) driver initialized [ 6.977630] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX [ 7.931745] printk: console [ttymxc0] enabled [ 7.940962] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 77, base_baud = 5000000) is a IMX [ 7.955830] msm_serial: driver initialized [ 7.960925] STMicroelectronics ASC driver initialized [ 7.971805] STM32 USART driver initialized [ 7.997400] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 [ 8.056708] brd: module loaded [ 8.102202] loop: module loaded [ 8.108332] lkdtm: No crash points registered, enable through debugfs [ 8.128861] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 8.136914] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 8.144955] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 8.153216] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 8.161227] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 8.169369] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 8.177100] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 8.188430] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 8.195459] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 8.204397] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 8.218284] scsi host0: ahci-imx [ 8.223718] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 84 [ 8.281500] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 8.295243] pps pps0: new PPS source ptp0 [ 8.355596] fec 2188000.ethernet eth0: registered PHC device 0 [ 8.366239] e1000e: Intel(R) PRO/1000 Network Driver [ 8.371241] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 8.377471] igb: Intel(R) Gigabit Ethernet Network Driver [ 8.382901] igb: Copyright (c) 2007-2014 Intel Corporation. [ 8.407698] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 8.415276] usbcore: registered new interface driver pegasus [ 8.421223] usbcore: registered new interface driver asix [ 8.426831] usbcore: registered new interface driver ax88179_178a [ 8.433081] usbcore: registered new interface driver cdc_ether [ 8.439180] usbcore: registered new interface driver smsc75xx [ 8.445140] usbcore: registered new interface driver smsc95xx [ 8.451130] usbcore: registered new interface driver net1080 [ 8.457023] usbcore: registered new interface driver cdc_subset [ 8.463094] usbcore: registered new interface driver zaurus [ 8.468983] usbcore: registered new interface driver cdc_ncm [ 8.485933] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.492569] ehci-pci: EHCI PCI platform driver [ 8.497240] ehci-platform: EHCI generic platform driver [ 8.503425] ehci-orion: EHCI orion driver [ 8.508311] SPEAr-ehci: EHCI SPEAr driver [ 8.513083] ehci-st: EHCI STMicroelectronics driver [ 8.518769] ehci-exynos: EHCI Exynos driver [ 8.523724] ehci-atmel: EHCI Atmel driver [ 8.528544] tegra-ehci: Tegra EHCI driver [ 8.533347] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.539672] ohci-pci: OHCI PCI platform driver [ 8.544290] ohci-platform: OHCI generic platform driver [ 8.550417] SPEAr-ohci: OHCI SPEAr driver [ 8.555198] ohci-st: OHCI STMicroelectronics driver [ 8.560916] ohci-atmel: OHCI Atmel driver [ 8.568783] usbcore: registered new interface driver usb-storage [ 8.578245] ata1: SATA link down (SStatus 0 SControl 300) [ 8.584016] ahci-imx 2200000.sata: no device found, disabling link. [ 8.590396] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 8.603833] i2c /dev entries driver [ 8.680442] sdhci: Secure Digital Host Controller Interface driver [ 8.686710] sdhci: Copyright(c) Pierre Ossman [ 8.699464] Synopsys Designware Multimedia Card Interface Driver [ 8.711953] sdhci-pltfm: SDHCI platform and OF driver helper [ 8.721231] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 8.729136] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 8.735244] ledtrig-cpu: registered to indicate activity on CPUs [ 8.744985] usbcore: registered new interface driver usbhid [ 8.750651] usbhid: USB HID core driver [ 8.765556] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 8.767976] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 8.777013] netem: version 1.3 [ 8.781445] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 8.782728] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 8.797225] IPv4 over IPsec tunneling driver [ 8.806119] NET: Registered protocol family 10 [ 8.816967] Segment Routing with IPv6 [ 8.826651] NET: Registered protocol family 17 [ 8.833564] 8021q: 802.1Q VLAN Support v1.8 [ 8.838919] Key type dns_resolver registered [ 8.857184] ThumbEE CPU extension supported. [ 8.861521] Registering SWP/SWPB emulation handler [ 8.873055] Loading compiled-in X.509 certificates [ 9.030096] imx_usb 2184200.usb: No over current polarity defined [ 9.042198] mmc0: host does not support reading read-only switch, assuming write-enable [ 9.042783] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 9.056332] mmc2: new DDR MMC card at address 0001 [ 9.057239] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 9.067929] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 9.074042] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 9.081097] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 9.087834] mmc0: new high speed SDHC card at address 1234 [ 9.094413] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (235:0) [ 9.095850] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 9.103354] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 9.113302] hub 1-0:1.0: USB hub found [ 9.118007] hub 1-0:1.0: 1 port detected [ 9.128056] mmcblk2: p1 p2 [ 9.135226] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 9.208059] Freeing unused kernel memory: 2048K [ 9.247635] Run /init as init process [ 9.406186] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: OK Running sysctl: [ 9.622060] hub 1-1:1.0: USB hub found OK [ 9.627013] hub 1-1:1.0: 4 ports detected Populating /dev using udev: [ 9.676369] udevd[132]: starting version 3.2.9 [ 9.685058] random: udevd: uninitialized urandom read (16 bytes read) [ 9.693336] random: udevd: uninitialized urandom read (16 bytes read) [ 9.700248] random: udevd: uninitialized urandom read (16 bytes read) [ 9.719924] udevd[132]: specified user 'tss' unknown [ 9.725156] udevd[132]: specified group 'tss' unknown [ 9.738949] udevd[133]: starting eudev-3.2.9 [ 11.045441] imx-ipuv3 2400000.ipu: IPUv3H probed [ 11.067376] imx-ipuv3 2800000.ipu: IPUv3H probed [ 11.158288] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops [imxdrm]) [ 11.167315] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops [imxdrm]) [ 11.176274] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops [imxdrm]) [ 11.184953] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops [imxdrm]) [ 11.195840] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 11.289107] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 11.338176] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 11.347577] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 11.358306] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 11.416581] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 11.434078] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 11.442468] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 11.449184] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 11.478190] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 11.484648] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 11.490863] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 11.526142] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 2 [ 11.654853] caam 2100000.crypto: Entropy delay = 3200 [ 11.720950] caam 2100000.crypto: Instantiated RNG4 SH0 [ 11.781713] caam 2100000.crypto: Instantiated RNG4 SH1 [ 11.786951] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 11.793598] caam 2100000.crypto: job rings = 2, qi = 0 [ 12.206966] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 12.234225] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 12.257936] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 12.267744] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 12.276633] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 12.294632] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 13.018672] caam algorithms registered in /proc/crypto [ 13.031446] caam 2100000.crypto: registering rng-caam [ 13.160292] random: crng init done [ 13.163847] random: 1 urandom warning(s) missed due to ratelimiting done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1027853/environment . /lava-1027853/environment / # /lava-1027853/bin/lava-test-runner /lava-1027853/0 /lava-1027853/bin/lava-test-runner /lava-1027853/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1027853/0/tests/0_dmesg + cat uuid + UUID=1027853_1.5.2.3.1[ 14.473117] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 14.611138] [ 14.730419] [ 14.844285] + set +x [ 14.857507] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1027853/environment / # . /lava-1027853/environment/lava-1027853/bin/lava-test-runner /lava-1027853/1 / # /lava-1027853/bin/lava-test-runner /lava-1027853/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1027853/1/tests/1_bootrr + cat uuid + UUID=1027853_1.5.2.3.5[ 15.500610] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1027853/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-1027853/1/../bin/lava-test-case [ 16.716498] /lava-1027853/1/../bin/lava-test-case [ 16.840497] /lava-1027853/1/../bin/lava-test-case [ 16.909086] + set +x [ 16.957023] / #