[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.14 (259 ms) U-Boot> setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 U-Boot> tftp 0x01000000 14090782/tftp-deploy-daxwydrb/kernel/zImage tftp 0x01000000 14090782/tftp-deploy-daxwydrb/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '14090782/tftp-deploy-daxwydrb/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####### 525.4 KiB/s done Bytes transferred = 5823048 (58da48 hex) U-Boot> tftp 0x02200000 14090782/tftp-deploy-daxwydrb/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 14090782/tftp-deploy-daxwydrb/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '14090782/tftp-deploy-daxwydrb/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################ 985.4 KiB/s done Bytes transferred = 9284367 (8dab0f hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 14090782/tftp-deploy-daxwydrb/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 14090782/tftp-deploy-daxwydrb/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '14090782/tftp-deploy-daxwydrb/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 742.2 KiB/s done Bytes transferred = 13687 (3577 hex) U-Boot>setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x58da48 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9284303 Bytes = 8.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006676 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.216-cip47 (KernelCI@build-j211137-arm-gcc-10-bcm2835-defconfig-flzfx) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Thu May 30 07:36:45 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:148 arm_dt_init_cpu_maps+0x1b8/0x200 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.216-cip47 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] Backtrace: [ 0.000000] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 0.000000] r7:c0e01edc r6:00000000 r5:00000009 r4:c0bbf8ef [ 0.000000] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 0.000000] [] (dump_stack) from [] (__warn+0x9c/0xdc) [ 0.000000] r5:00000009 r4:c0b36198 [ 0.000000] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) [ 0.000000] r9:c0f75c48 r8:c0b36211 r7:00000009 r6:c0d04d08 r5:00000094 r4:c0b36198 [ 0.000000] [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x1b8/0x200) [ 0.000000] r8:c0b36145 r7:00000000 r6:ff000000 r5:00000000 r4:eb9d96c4 [ 0.000000] [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x26c/0x644) [ 0.000000] r10:c0e01f70 r9:c0e01f68 r8:ebffff00 r7:c0bcd0c8 r6:2fffffff r5:c0e08738 [ 0.000000] r4:c0d340f8 [ 0.000000] [] (setup_arch) from [] (start_kernel+0x64/0x528) [ 0.000000] r10:10c53c7d r9:410fc075 r8:00000100 r7:c0f9003c r6:10c03c7d r5:c0e04240 [ 0.000000] r4:c0d004b0 [ 0.000000] [] (start_kernel) from [<00000000>] (0x0) [ 0.000000] r9:410fc075 r8:00000100 r7:00000000 r6:10c03c7d r5:00000051 r4:c0d004b0 [ 0.000000] ---[ end trace 58996bc4bee07162 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689036K/786432K available (8192K kernel code, 1596K rwdata, 3256K rodata, 1024K init, 713K bss, 31860K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 32786 entries in 97 pages <6>[ 0.000000] ftrace: allocated 97 pages with 3 groups <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000018] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008812] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018640] bcm2835: system timer (irq = 27) <6>[ 0.023750] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030237] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041497] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049927] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056716] Console: colour dummy device 80x30 <6>[ 0.061588] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072426] CPU: Testing write buffer coherency: ok <6>[ 0.077726] pid_max: default: 32768 minimum: 301 <6>[ 0.083091] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.090824] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.101101] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.109400] devtmpfs: initialized <6>[ 0.118927] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.127330] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.137653] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.148147] pinctrl core: initialized pinctrl subsystem <6>[ 0.155767] NET: Registered protocol family 16 <6>[ 0.162718] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.173352] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.173846] No ATAGs? <6>[ 0.182869] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.191292] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.197833] Serial: AMBA PL011 UART driver <6>[ 0.222789] Kprobes globally optimized <5>[ 0.232309] SCSI subsystem initialized <6>[ 0.236722] usbcore: registered new interface driver usbfs <6>[ 0.242718] usbcore: registered new interface driver hub <6>[ 0.248458] usbcore: registered new device driver usb <4>[ 0.254140] usb_phy_generic phy: supply vcc not found, using dummy regulator <6>[ 0.262027] mc: Linux media interface: v0.10 <6>[ 0.266716] videodev: Linux video capture interface: v2.00 <6>[ 0.272840] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.280089] Bluetooth: Core ver 2.22 <6>[ 0.284074] NET: Registered protocol family 31 <6>[ 0.288872] Bluetooth: HCI device and connection manager initialized <6>[ 0.295652] Bluetooth: HCI socket layer initialized <6>[ 0.300894] Bluetooth: L2CAP socket layer initialized <6>[ 0.306334] Bluetooth: SCO socket layer initialized <6>[ 0.312174] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.564108] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes, mapped to 0x(ptrval) <6>[ 0.575105] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 0.588513] Console: switching to colour frame buffer device 82x26 <6>[ 0.598119] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 0.615841] NET: Registered protocol family 2 <6>[ 0.621044] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.630461] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.639355] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.647611] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.655247] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.662230] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.669182] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.676770] NET: Registered protocol family 1 <6>[ 0.682294] RPC: Registered named UNIX socket transport module. <6>[ 0.688600] RPC: Registered udp transport module. <6>[ 0.693678] RPC: Registered tcp transport module. <6>[ 0.698738] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.707545] Unpacking initramfs... <6>[ 1.506952] Freeing initrd memory: 9068K <6>[ 1.512488] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.522618] Initialise system trusted keyrings <6>[ 1.527835] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.545138] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <5>[ 1.673564] Key type asymmetric registered <5>[ 1.678012] Asymmetric key parser 'x509' registered <6>[ 1.683485] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>[ 1.691299] io scheduler mq-deadline registered <6>[ 1.696203] io scheduler kyber registered <6>[ 1.708994] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.721191] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.732535] usbcore: registered new interface driver zd1211rw <6>[ 1.738737] usbcore: registered new interface driver lan78xx <6>[ 1.744878] usbcore: registered new interface driver asix <6>[ 1.750698] usbcore: registered new interface driver ax88179_178a <6>[ 1.757238] usbcore: registered new interface driver cdc_ether <6>[ 1.763544] usbcore: registered new interface driver smsc95xx <6>[ 1.769712] usbcore: registered new interface driver net1080 <6>[ 1.775806] usbcore: registered new interface driver cdc_subset <6>[ 1.782151] usbcore: registered new interface driver zaurus <6>[ 1.788245] usbcore: registered new interface driver cdc_ncm <6>[ 1.794919] usbcore: registered new interface driver usb-storage <6>[ 1.801513] i2c /dev entries driver <4>[ 1.807751] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.817217] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.824450] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.831016] sdhci: Copyright(c) Pierre Ossman <6>[ 1.836059] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.843554] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.850422] usbcore: registered new interface driver usbhid <6>[ 1.856403] usbhid: USB HID core driver <6>[ 1.860759] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.868735] NET: Registered protocol family 10 <6>[ 1.874957] Segment Routing with IPv6 <6>[ 1.879079] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.886300] NET: Registered protocol family 17 <6>[ 1.891667] oprofile: using timer interrupt. <5>[ 1.896793] Loading compiled-in X.509 certificates <6>[ 1.908402] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.917893] printk: console [ttyAMA0] enabled <6>[ 1.917893] printk: console [ttyAMA0] enabled <6>[ 1.927267] printk: bootconsole [pl11] disabled <6>[ 1.927267] printk: bootconsole [pl11] disabled <6>[ 1.940941] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.952497] ------------[ cut here ]------------ <4>[ 1.957405] WARNING: CPU: 0 PID: 44 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xfc/0x2f4 <4>[ 1.966635] Modules linked in: <4>[ 1.969963] CPU: 0 PID: 44 Comm: kworker/0:2 Tainted: G W 5.10.216-cip47 #1 <4>[ 1.978487] Hardware name: BCM2835 <4>[ 1.982159] Workqueue: events deferred_probe_work_func <4>[ 1.987564] Backtrace: <4>[ 1.990288] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 1.998122] r7:00000000 r6:00000000 r5:00000009 r4:c0bbf8ef <4>[ 2.004056] [] (show_stack) from [] (dump_stack+0x28/0x30) <4>[ 2.011542] [] (dump_stack) from [] (__warn+0x9c/0xdc) <4>[ 2.018678] r5:00000009 r4:c0ba8436 <4>[ 2.022529] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) <4>[ 2.030266] r9:c470ebc8 r8:00000000 r7:00000009 r6:c0632160 r5:0000004f r4:c0ba8436 <4>[ 2.038275] [] (warn_slowpath_fmt) from [] (dt_cpufreq_probe+0xfc/0x2f4) <4>[ 2.046976] r8:00000000 r7:c470f810 r6:c470ebc0 r5:c0e08868 r4:00000000 <4>[ 2.053971] [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.062676] r10:00000003 r9:c1032818 r8:00000000 r7:c1032810 r6:c0f36074 r5:c470f810 <4>[ 2.070750] r4:00000000 <4>[ 2.073559] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.082073] r7:c1032810 r6:c0f36074 r5:00000000 r4:c470f810 <4>[ 2.088002] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.096618] r10:00000003 r9:00000000 r8:c0f25768 r7:c470f810 r6:c46bf7fc r5:c0f36074 <4>[ 2.104704] r4:c470f810 <4>[ 2.107501] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.116812] r8:c0f25768 r7:c470f810 r6:c46bf7fc r5:c0f36074 r4:00000001 <4>[ 2.123787] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.132833] r7:c470f854 r6:c051febc r5:c46bf7fc r4:00000000 <4>[ 2.138751] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.147275] r6:c470f810 r5:00000001 r4:c470f810 <4>[ 2.152152] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.160937] r7:00000000 r6:c470f810 r5:c0f25710 r4:c470f810 <4>[ 2.166869] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.175761] [] (bus_probe_device) from [] (device_add+0x600/0x72c) <4>[ 2.183943] r7:00000000 r6:c0f253f8 r5:00000000 r4:c470f810 <4>[ 2.189863] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.198305] r9:c0e0b448 r8:c0e0b428 r7:05f5e100 r6:00000000 r5:00000000 r4:c470f800 <4>[ 2.206316] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.216318] r9:05f5e0ff r8:2faf0800 r7:05f5e100 r6:c46bf8e0 r5:00000000 r4:c470f800 <4>[ 2.224329] [] (platform_device_register_full) from [] (raspberrypi_cpufreq_probe+0x10c/0x198) <4>[ 2.234934] r7:05f5e100 r6:c0e08868 r5:00000000 r4:00000000 <4>[ 2.240852] [] (raspberrypi_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.250333] r9:c1032818 r8:00000000 r7:c1032810 r6:c0f3616c r5:c470f410 r4:00000000 <4>[ 2.258348] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.266878] r7:c1032810 r6:c0f3616c r5:00000000 r4:c470f410 <4>[ 2.272812] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.281416] r10:c470e340 r9:00000000 r8:c470f210 r7:c470f410 r6:c46bfa2c r5:c0f3616c <4>[ 2.289502] r4:c470f410 <4>[ 2.292320] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.301617] r8:c470f210 r7:c470f410 r6:c46bfa2c r5:c0f3616c r4:00000001 <4>[ 2.308588] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.317633] r7:c470f454 r6:c051febc r5:c46bfa2c r4:00000000 <4>[ 2.323563] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.332075] r6:c470f410 r5:00000001 r4:c470f410 <4>[ 2.336963] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.345748] r7:00000000 r6:c470f410 r5:c0f25710 r4:c470f410 <4>[ 2.351665] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.360541] [] (bus_probe_device) from [] (device_add+0x600/0x72c) <4>[ 2.368719] r7:00000000 r6:c0f253f8 r5:00000000 r4:c470f410 <4>[ 2.374651] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.383096] r9:c0e0b448 r8:c0e0b428 r7:00000000 r6:00000000 r5:00000000 r4:c470f400 <4>[ 2.391096] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.401098] r9:c470f210 r8:c470a090 r7:00000000 r6:c46bfb18 r5:00000000 r4:c470f400 <4>[ 2.409116] [] (platform_device_register_full) from [] (raspberrypi_clk_probe+0x160/0x31c) <4>[ 2.419375] r7:00000000 r6:00000000 r5:c470e2c0 r4:00000000 <4>[ 2.425306] [] (raspberrypi_clk_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.434442] r10:00000003 r9:c1032818 r8:00000000 r7:c1032810 r6:c0f1f86c r5:c470f210 <4>[ 2.442527] r4:00000000 <4>[ 2.445325] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.453850] r7:c1032810 r6:c0f1f86c r5:00000000 r4:c470f210 <4>[ 2.459767] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.468382] r10:00000003 r9:00000000 r8:c15a0a10 r7:c470f210 r6:c46bfc6c r5:c0f1f86c <4>[ 2.476473] r4:c470f210 <4>[ 2.479270] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.488578] r8:c15a0a10 r7:c470f210 r6:c46bfc6c r5:c0f1f86c r4:00000001 <4>[ 2.495552] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.504599] r7:c470f254 r6:c051febc r5:c46bfc6c r4:00000000 <4>[ 2.510518] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.519042] r6:c470f210 r5:00000001 r4:c470f210 <4>[ 2.523930] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.532715] r7:00000000 r6:c470f210 r5:c0f25710 r4:c470f210 <4>[ 2.538631] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.547508] [] (bus_probe_device) from [] (device_add+0x600/0x72c) <4>[ 2.555686] r7:00000000 r6:c0f253f8 r5:00000000 r4:c470f210 <4>[ 2.561606] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.570048] r9:c0e0b448 r8:c0e0b428 r7:c15a0a00 r6:00000000 r5:00000000 r4:c470f200 <4>[ 2.578059] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.588061] r9:c1032818 r8:00000001 r7:c15a0a00 r6:c46bfd58 r5:00000000 r4:c470f200 <4>[ 2.596079] [] (platform_device_register_full) from [] (rpi_firmware_probe+0x1a4/0x1ec) <4>[ 2.606083] r7:c15a0a00 r6:c15a0a10 r5:c470d640 r4:00000000 <4>[ 2.612003] [] (rpi_firmware_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.620878] r8:00000000 r7:c1032810 r6:c0f37a8c r5:c15a0a10 r4:00000000 <4>[ 2.627847] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.636374] r7:c1032810 r6:c0f37a8c r5:00000000 r4:c15a0a10 <4>[ 2.642302] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.650905] r10:c0f25664 r9:00000000 r8:00000000 r7:c15a0a10 r6:c46bfea4 r5:c0f37a8c <4>[ 2.658991] r4:c15a0a10 <4>[ 2.661788] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.671095] r8:00000000 r7:c15a0a10 r6:c46bfea4 r5:c0f37a8c r4:00000001 <4>[ 2.678065] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.687113] r7:c15a0a54 r6:c051febc r5:c46bfea4 r4:00000000 <4>[ 2.693044] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.701556] r6:c15a0a10 r5:00000001 r4:c15a0a10 <4>[ 2.706444] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.715234] r7:eb9c7300 r6:c15a0a10 r5:c0f25710 r4:c15a0a10 <4>[ 2.721151] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.730026] [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xcc) <4>[ 2.739246] r7:eb9c7300 r6:c0f25688 r5:c0f2564c r4:c15a0a10 <4>[ 2.745177] [] (deferred_probe_work_func) from [] (process_one_work+0x194/0x274) <4>[ 2.754570] r7:eb9c7300 r6:c0e0d188 r5:c0f25660 r4:c46a8c80 <4>[ 2.760487] [] (process_one_work) from [] (worker_thread+0x220/0x2e0) <4>[ 2.768929] r10:c46ac860 r9:c0f90ac0 r8:c0e0d19c r7:c0edcaa0 r6:c0e0d188 r5:c46a8c94 <4>[ 2.777015] r4:c46a8c80 <4>[ 2.779816] [] (worker_thread) from [] (kthread+0x11c/0x128) <4>[ 2.787478] r9:c1537e98 r8:c46a8c80 r7:c0134f34 r6:c46be000 r5:c46a6d80 r4:c46ac840 <4>[ 2.795490] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 2.802973] Exception stack(0xc46bffb0 to 0xc46bfff8) <4>[ 2.808278] ffa0: 00000000 00000000 00000000 00000000 <4>[ 2.816718] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.825164] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.832034] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0139ab8 <4>[ 2.840122] r4:c46a6d80 r3:00000001 <4>[ 2.843962] ---[ end trace 58996bc4bee07164 ]--- <6>[ 2.848874] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 2.857933] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.865596] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.924275] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.929272] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.936795] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.943977] hub 1-0:1.0: USB hub found <6>[ 2.948142] hub 1-0:1.0: 1 port detected <4>[ 2.955430] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <4>[ 2.991228] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 3.001827] mmc0: new high speed SDHC card at address 0002 <6>[ 3.008657] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 3.016221] mmcblk0: p1 <6>[ 3.302208] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.553279] hub 1-1:1.0: USB hub found <6>[ 3.557395] hub 1-1:1.0: 5 ports detected <6>[ 3.882194] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 4.015502] smsc95xx v2.0.0 <6>[ 4.175811] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 4.188214] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.256484] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 4.273787] smsc95xx 1-1.1:1.0 eth0: Link is Down <6>[ 4.292217] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.428552] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.436161] scsi host0: usb-storage 1-1.3:1.0 <5>[ 5.541903] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.852227] random: crng init done <5>[ 6.484806] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.493032] sd 0:0:0:0: [sda] Write Protect is off <3>[ 6.498530] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 6.504133] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 6.543479] sda: sda1 sda2 <5>[ 6.550421] sd 0:0:0:0: [sda] Attached SCSI removable disk <6>[ 9.463838] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 9.482265] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 9.512402] Sending DHCP requests ., OK <6>[ 9.556313] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.14 <6>[ 9.564617] IP-Config: Complete: <6>[ 9.568125] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.201.14, mask=255.255.255.0, gw=192.168.201.1 <6>[ 9.578845] host=bcm2836-rpi-2-b-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 9.586528] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 9.586535] nameserver0=192.168.201.1 <5>[ 9.598773] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 9.628647] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <5>[ 9.638367] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' <4>[ 9.647005] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 9.655977] clk: Disabling unused clocks <6>[ 9.660418] ALSA device list: <6>[ 9.663701] cfg80211: failed to load regulatory.db <6>[ 9.668922] No soundcards found. <6>[ 9.672986] uart-pl011 3f201000.serial: no DMA platform data <6>[ 9.685728] Freeing unused kernel memory: 1024K <6>[ 9.690870] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 9.924404] udevd[93]: starting version 3.2.9 <27>[ 9.943874] udevd[93]: specified user 'tss' unknown <27>[ 9.949379] udevd[93]: specified group 'tss' unknown <30>[ 9.960761] udevd[94]: starting eudev-3.2.9 <4>[ 10.317508] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 10.386558] bcm2835-rng 3f104000.rng: hwrng registered <3>[ 10.455155] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 10.461934] vchiq: could not load vchiq done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-14090782/environment . /lava-14090782/environment / # /lava-14090782/bin/lava-test-runner /lava-14090782/0 /lava-14090782/bin/lava-test-runner /lava-14090782/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-14090782/0/tests/0_dmesg + cat uuid + UUID=14090782_1.5.2.<8>[ 11.752777] 4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 11.818263] <8>[ 11.878739] <8>[ 11.939391] + set +x <8>[ 11.950418] / #