Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. ser2net port 3009 device /dev/ttyimx7d-sdb-2 [115200 N81] (Debian GNU/Linux) U-Boot 2016.03-imx_v2016.03_4.1.15_2.0.0_ga+g0ec2a01 (Nov 11 2016 - 03:13:54 -0600) CPU: Freescale i.MX7D rev1.3 996 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 29C Reset cause: POR Board: i.MX7D SABRESD RevA I2C: ready DRAM: 1 GiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment Display: TFT43AB (480x272) Video: 480x272x24 In: serial Out: serial Err: serial switch to partitions #0, OK mmc0 is current device Net: FEC0 Normal Boot Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 172.16.1.233 (1431 ms) => setenv serverip 59.144.98.45 setenv serverip 59.144.98.45 => tftp 0x80800000 1226965/tftp-deploy-7f_i8z3t/kernel/zImage tftp 0x80800000 1226965/tftp-deploy-7f_i8z3t/kernel/zImage Using FEC0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.233; sending through gateway 172.16.1.4 Filename '1226965/tftp-deploy-7f_i8z3t/kernel/zImage'. Load address: 0x80800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################################### 11 MiB/s done Bytes transferred = 8496504 (81a578 hex) => tftp 0x86800000 1226965/tftp-deploy-7f_i8z3t/ramdisk/ramdisk.cpio.gz.uboot tftp 0x86800000 1226965/tftp-deploy-7f_i8z3t/ramdisk/ramdisk.cpio.gz.uboot Using FEC0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.233; sending through gateway 172.16.1.4 Filename '1226965/tftp-deploy-7f_i8z3t/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x86800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################### 9.9 MiB/s done Bytes transferred = 9275742 (8d895e hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x83000000 1226965/tftp-deploy-7f_i8z3t/dtb/imx7d-sdb.dtb tftp 0x83000000 1226965/tftp-deploy-7f_i8z3t/dtb/imx7d-sdb.dtb Using FEC0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.233; sending through gateway 172.16.1.4 Filename '1226965/tftp-deploy-7f_i8z3t/dtb/imx7d-sdb.dtb'. Load address: 0x83000000 Loading: *### 6.4 MiB/s done Bytes transferred = 33576 (8328 hex) => setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x80800000 0x86800000 0x83000000 bootz 0x80800000 0x86800000 0x83000000 Kernel image @ 0x80800000 [ 0x000000 - 0x81a578 ] ## Loading init Ramdisk from Legacy Image at 86800000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9275678 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 8300b327 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.280-cip96-rt30 (KernelCI@build-j1546174-arm-gcc-10-imx-v6-v7-defconfig-722vc) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Tue May 23 00:21:18 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Freescale i.MX7 SabreSD Board [ 0.000000] earlycon: ec_imx6q0 at MMIO 0x30860000 (options '') [ 0.000000] bootconsole [ec_imx6q0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] percpu: Embedded 17 pages/cpu s38184 r8192 d23256 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Memory: 939788K/1048576K available (11264K kernel code, 880K rwdata, 3616K rodata, 1024K init, 7651K bss, 43252K reserved, 65536K cma-reserved, 196608K highmem) <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) <5>[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) <5>[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) <5>[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 881 kB) <5>[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7652 kB) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] Running RCU self tests <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU lockdep checking is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (virt). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns <6>[ 0.000009] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns <6>[ 0.008291] Switching to timer-based delay loop, resolution 125ns <6>[ 0.015210] Switching to timer-based delay loop, resolution 41ns <6>[ 0.020983] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.029119] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.040938] Console: colour dummy device 80x30 <4>[ 0.043727] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.051812] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.056148] ... MAX_LOCK_DEPTH: 48 <4>[ 0.060610] ... MAX_LOCKDEP_KEYS: 8191 <4>[ 0.065277] ... CLASSHASH_SIZE: 4096 <4>[ 0.069886] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.074610] ... MAX_LOCKDEP_CHAINS: 65536 <4>[ 0.079364] ... CHAINHASH_SIZE: 32768 <4>[ 0.084061] memory used by lock dependency info: 4655 kB <4>[ 0.089776] per task-struct memory footprint: 1536 bytes <6>[ 0.095508] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.106146] pid_max: default: 32768 minimum: 301 <6>[ 0.111432] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.117973] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.128018] CPU: Testing write buffer coherency: ok <6>[ 0.131930] CPU0: update cpu_capacity 1024 <6>[ 0.134815] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.143100] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.148136] rcu: Hierarchical SRCU implementation. <6>[ 0.155062] smp: Bringing up secondary CPUs ... <6>[ 0.160201] smp: Brought up 1 node, 1 CPU <6>[ 0.161765] SMP: Total of 1 processors activated (48.00 BogoMIPS). <6>[ 0.168348] CPU: All CPU(s) started in SVC mode. <6>[ 0.176122] devtmpfs: initialized <6>[ 0.202974] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.208896] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.218338] futex hash table entries: 512 (order: 3, 32768 bytes) <6>[ 0.227580] pinctrl core: initialized pinctrl subsystem <6>[ 0.236244] NET: Registered protocol family 16 <6>[ 0.260440] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.268652] cpuidle: using governor menu <6>[ 0.271523] No ATAGs? <6>[ 0.271784] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.280963] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.299740] imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver <4>[ 0.306222] imx7d-pinctrl 30330000.iomuxc: Failed to create dummy-iomuxc-gpr@30340000 debugfs directory <6>[ 0.315155] imx7d-pinctrl 30330000.iomuxc: initialized IMX pinctrl driver <6>[ 0.324048] vdd1p0d: Bringing 0uV into 800000-800000uV <6>[ 0.327280] vdd1p0d: supplied by regulator-dummy <6>[ 0.333129] vdd1p2: supplied by regulator-dummy <6>[ 0.430576] mxs-dma 33000000.dma-apbh: initialized <6>[ 0.440565] vgaarb: loaded <5>[ 0.441802] SCSI subsystem initialized <6>[ 0.446085] usbcore: registered new interface driver usbfs <6>[ 0.450825] usbcore: registered new interface driver hub <6>[ 0.456201] usbcore: registered new device driver usb <4>[ 0.461882] usb_phy_generic usbphynop1: usbphynop1 supply vcc not found, using dummy regulator <6>[ 0.470810] usb_phy_generic usbphynop1: Linked as a consumer to regulator.0 <4>[ 0.478052] usb_phy_generic usbphynop3: usbphynop3 supply vcc not found, using dummy regulator <6>[ 0.486806] usb_phy_generic usbphynop3: Linked as a consumer to regulator.0 <4>[ 0.494439] usb_phy_generic usbphynop2: usbphynop2 supply vcc not found, using dummy regulator <6>[ 0.502959] usb_phy_generic usbphynop2: Linked as a consumer to regulator.0 <6>[ 0.513386] i2c i2c-0: IMX I2C adapter registered <6>[ 0.515545] i2c i2c-0: can't use DMA, using PIO instead. <6>[ 0.522894] i2c i2c-1: IMX I2C adapter registered <6>[ 0.526130] i2c i2c-1: can't use DMA, using PIO instead. <6>[ 0.533011] i2c i2c-2: IMX I2C adapter registered <6>[ 0.536716] i2c i2c-2: can't use DMA, using PIO instead. <6>[ 0.543856] i2c i2c-3: IMX I2C adapter registered <6>[ 0.547304] i2c i2c-3: can't use DMA, using PIO instead. <6>[ 0.553419] media: Linux media interface: v0.10 <6>[ 0.557801] videodev: Linux video capture interface: v2.00 <6>[ 0.564034] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.568726] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.578288] PTP clock support registered <6>[ 0.583221] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.591654] Bluetooth: Core ver 2.22 <6>[ 0.592749] NET: Registered protocol family 31 <6>[ 0.597381] Bluetooth: HCI device and connection manager initialized <6>[ 0.604175] Bluetooth: HCI socket layer initialized <6>[ 0.609220] Bluetooth: L2CAP socket layer initialized <6>[ 0.614786] Bluetooth: SCO socket layer initialized <6>[ 0.621989] clocksource: Switched to clocksource arch_sys_counter <5>[ 0.882840] VFS: Disk quotas dquot_6.6.0 <6>[ 0.884337] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 0.918217] NET: Registered protocol family 2 <6>[ 0.920490] IP idents hash table entries: 16384 (order: 5, 131072 bytes) <6>[ 0.929668] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) <6>[ 0.935369] TCP established hash table entries: 8192 (order: 3, 32768 bytes) <6>[ 0.942724] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) <6>[ 0.950238] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.956721] UDP hash table entries: 512 (order: 3, 40960 bytes) <6>[ 0.962330] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) <6>[ 0.969331] NET: Registered protocol family 1 <6>[ 0.975441] RPC: Registered named UNIX socket transport module. <6>[ 0.979609] RPC: Registered udp transport module. <6>[ 0.984660] RPC: Registered tcp transport module. <6>[ 0.989573] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.998802] Trying to unpack rootfs image as initramfs... <6>[ 1.950183] Freeing initrd memory: 9060K <6>[ 1.953845] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.964964] Initialise system trusted keyrings <6>[ 1.967720] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <5>[ 1.993688] NFS: Registering the id_resolver key type <5>[ 1.996322] Key type id_resolver registered <5>[ 2.000659] Key type id_legacy registered <6>[ 2.005239] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. <6>[ 2.013027] fuse init (API version 7.27) <5>[ 2.030609] Key type asymmetric registered <5>[ 2.032506] Asymmetric key parser 'x509' registered <6>[ 2.037529] bounce: pool size: 64 pages <6>[ 2.041517] io scheduler noop registered <6>[ 2.045702] io scheduler deadline registered <6>[ 2.050893] io scheduler cfq registered (default) <6>[ 2.055322] io scheduler mq-deadline registered <6>[ 2.059971] io scheduler kyber registered <4>[ 2.072220] pwm-backlight backlight: backlight supply power not found, using dummy regulator <6>[ 2.078388] pwm-backlight backlight: Linked as a consumer to regulator.0 <4>[ 2.097454] imx-sdma 30bd0000.sdma: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2 <4>[ 2.107486] imx7-pgc imx7-pgc-domain.1: DMA mask not set <6>[ 2.110566] imx7-pgc imx7-pgc-domain.1: Linked as a consumer to regulator.1 <6>[ 2.118042] imx-sdma 30bd0000.sdma: external firmware not found, using ROM firmware <6>[ 2.128665] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1 <6>[ 2.133447] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 <6>[ 2.137807] pfuze100-regulator 0-0008: pfuze3000 found. <6>[ 2.168690] VLDO4: Bringing 3300000uV into 2800000-2800000uV <4>[ 2.174057] reset_imx7 30390000.src: Failed to create dummy-src@30390000 debugfs��<6>[ 2.184284] console [ttymxc0] enabled <6>[ 2.184284] console [ttymxc0] enabled <6>[ 2.189317] bootconsole [ec_imx6q0] disabled <6>[ 2.189317] bootconsole [ec_imx6q0] disabled <6>[ 2.202218] 30a80000.serial: ttymxc5 at MMIO 0x30a80000 (irq = 57, base_baud = 15000000) is a IMX <6>[ 2.223718] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <6>[ 2.230642] [drm] No driver support for vblank timestamp query. <3>[ 2.237360] mxsfb 30730000.lcdif: Failed to create outputs <6>[ 2.271362] brd: module loaded <6>[ 2.304296] loop: module loaded <3>[ 2.321613] spi_imx 30840000.ecspi: dma setup error -19, use pio <6>[ 2.329490] spi_imx 30840000.ecspi: probed <6>[ 2.337079] CAN device driver interface <6>[ 2.342188] flexcan 30a10000.can: Linked as a consumer to regulator.7 <6>[ 2.350827] flexcan 30a10000.can: device registered (reg_base=(ptrval), irq=52) <4>[ 2.362996] fec 30be0000.ethernet: 30be0000.ethernet supply phy not found, using dummy regulator <6>[ 2.372415] fec 30be0000.ethernet: Linked as a consumer to regulator.0 <6>[ 2.383362] pps pps0: new PPS source ptp0 <6>[ 2.454982] fec 30be0000.ethernet eth0: registered PHC device 0 <4>[ 2.464227] fec 30bf0000.ethernet: 30bf0000.ethernet supply phy not found, using dummy regulator <6>[ 2.473787] fec 30bf0000.ethernet: Linked as a consumer to regulator.0 <6>[ 2.481638] pps pps1: new PPS source ptp1 <3>[ 2.487524] fec 30bf0000.ethernet: Invalid MAC address: 00:00:00:00:00:00 <6>[ 2.494734] fec 30bf0000.ethernet: Using random MAC address: 3a:7c:89:10:fe:3d <6>[ 3.406595] fec 30bf0000.ethernet eth1: registered PHC device 1 <6>[ 3.414594] usbcore: registered new interface driver asix <6>[ 3.420382] usbcore: registered new interface driver ax88179_178a <6>[ 3.427066] usbcore: registered new interface driver cdc_ether <6>[ 3.433502] usbcore: registered new interface driver net1080 <6>[ 3.439537] usbcore: registered new interface driver cdc_subset <6>[ 3.445992] usbcore: registered new interface driver zaurus <6>[ 3.452189] usbcore: registered new interface driver cdc_ncm <6>[ 3.458133] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 3.464989] ehci-pci: EHCI PCI platform driver <6>[ 3.469814] ehci-mxc: Freescale On-Chip EHCI Host driver <6>[ 3.476268] usbcore: registered new interface driver usb-storage <6>[ 3.486755] imx_usb 30b10000.usb: Linked as a consumer to regulator.3 <6>[ 3.502260] imx_usb 30b20000.usb: Linked as a consumer to regulator.4 <6>[ 3.512212] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 3.517737] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 3.552041] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 3.562686] hub 1-0:1.0: USB hub found <6>[ 3.566990] hub 1-0:1.0: 1 port detected <6>[ 3.578463] input: 30370000.snvs:snvs-powerkey as /devices/platform/soc/30000000.aips-bus/30370000.snvs/30370000.snvs:snvs-powerkey/input/input0 <4>[ 3.594166] ads7846 spi2.0: spi2.0 supply vcc not found, using dummy regulator <6>[ 3.603887] ads7846 spi2.0: Linked as a consumer to regulator.0 <6>[ 3.611713] ads7846 spi2.0: touchscreen, irq 135 <6>[ 3.619061] input: ADS7846 Touchscreen as /devices/platform/soc/30800000.aips-bus/30800000.spba-bus/30840000.ecspi/spi_master/spi2/spi2.0/input/input1 <6>[ 3.639614] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc0 <6>[ 3.646518] i2c /dev entries driver <6>[ 3.659817] imx2-wdt 30280000.wdog: timeout 60 sec (nowayout=0) <6>[ 3.666914] Bluetooth: HCI UART driver ver 2.3 <6>[ 3.671644] Bluetooth: HCI UART protocol H4 registered <6>[ 3.677638] Bluetooth: HCI UART protocol LL registered <6>[ 3.684363] cpu cpu0: Linked as a consumer to regulator.8 <6>[ 3.690502] cpu cpu0: Dropping the link to regulator.8 <6>[ 3.698753] cpu cpu0: Linked as a consumer to regulator.8 <6>[ 3.710242] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.717059] sdhci: Copyright(c) Pierre Ossman <6>[ 3.721701] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.732899] sdhci-esdhc-imx 30b40000.usdhc: Got CD GPIO <6>[ 3.738463] sdhci-esdhc-imx 30b40000.usdhc: Got WP GPIO <6>[ 3.779859] mmc0: SDHCI controller on 30b40000.usdhc [30b40000.usdhc] using ADMA <6>[ 3.791386] sdhci-esdhc-imx 30b50000.usdhc: Linked as a consumer to regulator.6 <6>[ 3.841392] mmc0: new high speed SDHC card at address aaaa <6>[ 3.851740] mmcblk0: mmc0:aaaa SA16G 14.8 GiB <6>[ 3.863742] mmcblk0: p1 p2 <6>[ 4.043781] mmc1: SDHCI controller on 30b50000.usdhc [30b50000.usdhc] using ADMA <4>[ 4.089773] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) <6>[ 4.095690] mmc2: SDHCI controller on 30b60000.usdhc [30b60000.usdhc] using ADMA <4>[ 4.108929] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) <6>[ 4.119577] caam 30900000.caam: Entropy delay = 3200 <6>[ 4.125160] caam 30900000.caam: Instantiated RNG4 SH0 <6>[ 4.184573] caam 30900000.caam: Instantiated RNG4 SH1 <6>[ 4.189905] caam 30900000.caam: device ID = 0x0a16030000000000 (Era 8) <6>[ 4.196738] caam 30900000.caam: job rings = 3, qi = 0 <4>[ 4.205509] mmc1: queuing unknown CIS tuple 0x80 (6 bytes) <6>[ 4.230317] caam algorithms registered in /proc/crypto <6>[ 4.243878] caam_jr 30901000.jr0: registering rng-caam <6>[ 4.250342] caam 30900000.caam: caam pkc algorithms registered in /proc/crypto <6>[ 4.260836] usbcore: registered new interface driver usbhid <6>[ 4.266805] usbhid: USB HID core driver <6>[ 4.274407] imx7d_adc 30610000.adc: Linked as a consumer to regulator.5 <6>[ 4.285329] imx7d_adc 30620000.adc: Linked as a consumer to regulator.5 <6>[ 4.395942] mmc1: new ultra high speed SDR104 SDIO card at address 0001 <6>[ 4.417453] NET: Registered protocol family 10 <6>[ 4.426238] Segment Routing with IPv6 <6>[ 4.430603] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.439079] NET: Registered protocol family 17 <6>[ 4.444244] can: controller area network core (rev 20170425 abi 9) <6>[ 4.451023] NET: Registered protocol family 29 <6>[ 4.457253] can: raw protocol (rev 20170425) <6>[ 4.462193] can: broadcast manager protocol (rev 20170425 t) <6>[ 4.468226] can: netlink gateway (rev 20170425) max_hops=1 <5>[ 4.474628] Key type dns_resolver registered <5>[ 4.479307] Registering SWP/SWPB emulation handler <5>[ 4.485925] Loading compiled-in X.509 certificates <6>[ 4.622748] imx6q-pcie 33800000.pcie: host bridge /soc/aips-bus@30800000/pcie@33800000 ranges: <6>[ 4.631802] imx6q-pcie 33800000.pcie: IO 0x4ff80000..0x4ff8ffff -> 0x00000000 <6>[ 4.639791] imx6q-pcie 33800000.pcie: MEM 0x40000000..0x4fefffff -> 0x40000000 <3>[ 5.763982] imx6q-pcie 33800000.pcie: Phy link never came up <6>[ 5.773937] imx6q-pcie 33800000.pcie: PCI host bridge to bus 0000:00 <6>[ 5.780592] pci_bus 0000:00: root bus resource [bus 00-ff] <6>[ 5.786448] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] <6>[ 5.792965] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fefffff] <6>[ 5.804826] PCI: bus0: Fast back to back transfers disabled <6>[ 5.813613] PCI: bus1: Fast back to back transfers enabled <6>[ 5.819440] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x400fffff 64bit] <6>[ 5.827111] pci 0000:00:00.0: BAR 6: assigned [mem 0x40100000-0x4010ffff pref] <6>[ 5.834671] pci 0000:00:00.0: PCI bridge to [bus 01-ff] <6>[ 5.842265] panel-simple panel: Linked as a consumer to regulator.21 <6>[ 5.851537] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <6>[ 5.858516] [drm] No driver support for vblank timestamp query. <6>[ 5.880003] Console: switching to colour frame buffer device 60x34 <6>[ 5.888125] mxsfb 30730000.lcdif: fb0: DRM emulated frame buffer device <6>[ 5.898753] [drm] Initialized mxsfb-drm 1.0.0 20160824 for 30730000.lcdif on minor 0 <6>[ 5.910511] imx_thermal tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C <6>[ 5.924593] input: gpio-keys as /devices/platform/gpio-keys/input/input2 <6>[ 5.932548] snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:02 UTC (2) <6>[ 5.952555] Generic PHY 30be0000.ethernet-1:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) <6>[ 5.967284] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready <6>[ 5.981017] Generic PHY 30be0000.ethernet-1:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=30be0000.ethernet-1:01, irq=POLL) <6>[ 5.994336] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready <6>[ 11.163936] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 11.182062] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 11.213395] Sending DHCP requests .., OK <6>[ 13.436298] IP-Config: Got DHCP answer from 172.16.1.4, my address is 172.16.1.233 <6>[ 13.444222] IP-Config: Complete: <6>[ 13.447736] device=eth0, hwaddr=00:04:9f:05:b3:72, ipaddr=172.16.1.233, mask=255.255.255.0, gw=172.16.1.4 <6>[ 13.458082] host=172.16.1.233, domain=example.org, nis-domain=(none) <6>[ 13.465197] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= <6>[ 13.465204] nameserver0=172.16.1.4 <5>[ 13.488150] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 13.544904] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <6>[ 13.555147] ALSA device list: <6>[ 13.558395] No soundcards found. <4>[ 13.562980] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 13.572158] cfg80211: failed to load regulatory.db <6>[ 13.580863] Freeing unused kernel memory: 1024K <6>[ 13.602416] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 13.929740] udevd[197]: starting version 3.2.9 <5>[ 13.936941] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 13.945510] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 13.952451] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 13.970289] udevd[197]: specified user 'tss' unknown <27>[ 13.976159] udevd[197]: specified group 'tss' unknown <30>[ 13.995628] udevd[198]: starting eudev-3.2.9 <6>[ 15.323050] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 <4>[ 15.401235] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 done Saving random seed: <5>[ 15.856192] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <5>[ 16.027392] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh exp<3>[ 16.483792] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 ort SHELL=/bin/sh / # . /lava-1226965/environment . /lava-1226965/environment / # /lava-1226965/bin/lava-test-runner /lava-1226965/0 /lava-1226965/bin/lava-test-runner /lava-1226965/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1226965/0/tests/0_dmesg + cat uuid + UUID=1226965_1.5.2.4.1<8>[ 21.947841] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 22.030707] <8>[ 22.105121] <8>[ 22.178903] + set +x <8>[ 22.189854] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1226965/environment / # . /lava-1226965/environment/lava-1226965/bin/lava-test-runner /lava-1226965/1 / # /lava-1226965/bin/lava-test-runner /lava-1226965/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1226965/1/tests/1_bootrr + cat uuid + UUID=1226965_1.5.2.4.5<8>[ 27.987026] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1226965/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1226965/1/../bin/lava-test-case <8>[ 28.085823] /lava-1226965/1/../bin/lava-test-case <8>[ 29.169196] /lava-1226965/1/../bin/lava-test-case <8>[ 29.210452] + set +x <8>[ 29.240254] / #