connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1034629/tftp-deploy-ro3rpub9/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1034629/tftp-deploy-ro3rpub9/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1034629/tftp-deploy-ro3rpub9/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1034629/tftp-deploy-ro3rpub9/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1034629/tftp-deploy-ro3rpub9/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1034629/tftp-deploy-ro3rpub9/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 3a:37:93:86:48:94 T eth0: DHCP client bound to address 10.8.254.127 Loading ARM Linux zImage '/mnt/tftp/1034629/tftp-deploy-ro3rpub9/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x1288e000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1034629/tftp-deploy-ro3rpub9/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x188d8cd4 Loading devicetree from '/mnt/tftp/1034629/tftp-deploy-ro3rpub9/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x1288e000, initrd at 0x18000000, oftree at 0x188d9000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.306-cip107 (KernelCI@build-j140630-arm-gcc-10-imx-v6-v7-defconfig-x7rcn) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Thu Mar 14 20:37:41 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] percpu: Embedded 17 pages/cpu s37928 r8192 d23512 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1978960K/2097152K available (11264K kernel code, 880K rwdata, 3616K rodata, 1024K init, 7651K bss, 52656K reserved, 65536K cma-reserved, 1244148K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 881 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7652 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000036] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001582] Console: colour dummy device 80x30 [ 0.001624] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001644] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001662] ... MAX_LOCK_DEPTH: 48 [ 0.001680] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001697] ... CLASSHASH_SIZE: 4096 [ 0.001714] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001731] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001748] ... CHAINHASH_SIZE: 32768 [ 0.001764] memory used by lock dependency info: 4655 kB [ 0.001781] per task-struct memory footprint: 1536 bytes [ 0.001880] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001907] CPU: Testing write buffer coherency: ok [ 0.002000] CPU0: Spectre v2: using BPIALL workaround [ 0.002021] pid_max: default: 32768 minimum: 301 [ 0.002381] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002418] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006653] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.008835] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.009396] rcu: Hierarchical SRCU implementation. [ 0.011398] smp: Bringing up secondary CPUs ... [ 0.013769] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.013780] CPU1: Spectre v2: using BPIALL workaround [ 0.016453] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.016465] CPU2: Spectre v2: using BPIALL workaround [ 0.018564] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.018577] CPU3: Spectre v2: using BPIALL workaround [ 0.018924] smp: Brought up 1 node, 4 CPUs [ 0.018950] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.018971] CPU: All CPU(s) started in SVC mode. [ 0.021570] devtmpfs: initialized [ 0.044806] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.047131] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.047200] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.051605] pinctrl core: initialized pinctrl subsystem [ 0.056894] NET: Registered protocol family 16 [ 0.074184] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.077331] cpuidle: using governor menu [ 0.077551] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.092837] vdd1p1: supplied by regulator-dummy [ 0.094296] vdd3p0: supplied by regulator-dummy [ 0.095484] vdd2p5: supplied by regulator-dummy [ 0.096619] vddarm: supplied by regulator-dummy [ 0.098285] vddpu: supplied by regulator-dummy [ 0.099118] vddsoc: supplied by regulator-dummy [ 0.124014] No ATAGs? [ 0.124440] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.124547] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.126824] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.127646] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.185687] mxs-dma 110000.dma-apbh: initialized [ 0.188383] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.iomuxc; cannot claim for regulator-usbotgvbus [ 0.188415] imx6q-pinctrl 20e0000.iomuxc: pin-42 (regulator-usbotgvbus) status -22 [ 0.188442] imx6q-pinctrl 20e0000.iomuxc: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.iomuxc [ 0.188465] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.188538] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.191521] vgaarb: loaded [ 0.192483] SCSI subsystem initialized [ 0.193680] usbcore: registered new interface driver usbfs [ 0.193912] usbcore: registered new interface driver hub [ 0.194046] usbcore: registered new device driver usb [ 0.196849] i2c i2c-0: IMX I2C adapter registered [ 0.196895] i2c i2c-0: can't use DMA, using PIO instead. [ 0.198201] i2c i2c-1: IMX I2C adapter registered [ 0.198242] i2c i2c-1: can't use DMA, using PIO instead. [ 0.199428] i2c i2c-2: IMX I2C adapter registered [ 0.199468] i2c i2c-2: can't use DMA, using PIO instead. [ 0.199810] media: Linux media interface: v0.10 [ 0.199919] videodev: Linux video capture interface: v2.00 [ 0.200352] pps_core: LinuxPPS API ver. 1 registered [ 0.200376] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.200438] PTP clock support registered [ 0.201184] Advanced Linux Sound Architecture Driver Initialized. [ 0.204455] Bluetooth: Core ver 2.22 [ 0.204569] NET: Registered protocol family 31 [ 0.204590] Bluetooth: HCI device and connection manager initialized [ 0.204698] Bluetooth: HCI socket layer initialized [ 0.204736] Bluetooth: L2CAP socket layer initialized [ 0.204929] Bluetooth: SCO socket layer initialized [ 0.206901] clocksource: Switched to clocksource mxc_timer1 [ 0.420976] VFS: Disk quotas dquot_6.6.0 [ 0.421138] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.447232] NET: Registered protocol family 2 [ 0.447816] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.450185] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) [ 0.450308] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.450460] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.451480] TCP: Hash tables configured (established 8192 bind 8192) [ 0.452146] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.452343] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.452953] NET: Registered protocol family 1 [ 0.454906] RPC: Registered named UNIX socket transport module. [ 0.454985] RPC: Registered udp transport module. [ 0.455009] RPC: Registered tcp transport module. [ 0.455030] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.457312] Trying to unpack rootfs image as initramfs... [ 1.406600] Freeing initrd memory: 9060K [ 1.407820] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.408499] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.413080] Initialise system trusted keyrings [ 1.413841] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.429695] NFS: Registering the id_resolver key type [ 1.429850] Key type id_resolver registered [ 1.429927] Key type id_legacy registered [ 1.430102] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.431485] fuse init (API version 7.27) [ 1.444159] Key type asymmetric registered [ 1.444323] Asymmetric key parser 'x509' registered [ 1.444557] bounce: pool size: 64 pages [ 1.444678] io scheduler noop registered [ 1.444707] io scheduler deadline registered [ 1.445050] io scheduler cfq registered (default) [ 1.445078] io scheduler mq-deadline registered [ 1.445102] io scheduler kyber registered [ 1.459094] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.459362] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.461867] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 1.462350] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 1.462585] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 1.463033] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 1.463504] PU : no governor for states [ 1.463560] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 1.467122] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 1.467989] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 1.468016] pfuze100-regulator 2-0008: pfuze100 found. [ 1.493716] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 2.459424] console [ttymxc0] enabled [ 2.466024] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 66, base_baud = 5000000) is a IMX [ 2.490090] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.496314] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.502539] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 2.508288] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 2.517587] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 2.525556] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 2.531754] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 2.540684] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 [ 2.550682] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21c8000.pre [ 2.557500] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21c9000.pre [ 2.564238] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21ca000.pre [ 2.571609] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21cb000.pre [ 2.578421] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21c9000.pre [ 2.585160] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21ca000.pre [ 2.592814] imx-ipuv3 2400000.ipu: Linked as a consumer to 21cc000.prg [ 2.601407] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.606332] imx-ipuv3 2800000.ipu: Linked as a consumer to 21cd000.prg [ 2.615208] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.621967] [drm] No driver support for vblank timestamp query. [ 2.629409] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.637166] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.644905] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 2.652677] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 2.661192] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 2.676055] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.684509] [drm] Cannot find any crtc or sizes [ 2.692007] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.700074] imx-ipuv3 2800000.ipu: IPUv3H probed [ 2.726801] brd: module loaded [ 2.754025] loop: module loaded [ 2.759256] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.767295] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.775322] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.783562] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.794620] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.801694] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.810557] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.822961] scsi host0: ahci-imx [ 2.827803] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 73 [ 2.844313] CAN device driver interface [ 2.850879] fec 2188000.ethernet: Linked as a consumer to regulator.9 [ 2.860877] pps pps0: new PPS source ptp0 [ 2.902953] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.910539] usbcore: registered new interface driver asix [ 2.916041] usbcore: registered new interface driver ax88179_178a [ 2.922285] usbcore: registered new interface driver cdc_ether [ 2.928278] usbcore: registered new interface driver net1080 [ 2.934033] usbcore: registered new interface driver cdc_subset [ 2.940094] usbcore: registered new interface driver zaurus [ 2.945840] usbcore: registered new interface driver cdc_ncm [ 2.951570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.958153] ehci-pci: EHCI PCI platform driver [ 2.962706] ehci-mxc: Freescale On-Chip EHCI Host driver [ 2.968912] usbcore: registered new interface driver usb-storage [ 2.978832] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 2.987343] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 2.997419] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 3.002928] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 3.036952] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 3.046410] hub 1-0:1.0: USB hub found [ 3.050513] hub 1-0:1.0: 1 port detected [ 3.066119] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 3.072651] i2c /dev entries driver [ 3.085732] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 3.092517] Bluetooth: HCI UART driver ver 2.3 [ 3.097070] Bluetooth: HCI UART protocol H4 registered [ 3.102323] Bluetooth: HCI UART protocol LL registered [ 3.109011] sdhci: Secure Digital Host Controller Interface driver [ 3.115207] sdhci: Copyright(c) Pierre Ossman [ 3.119635] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.126602] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 3.167256] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 3.168656] ata1: SATA link down (SStatus 0 SControl 300) [ 3.180161] ahci-imx 2200000.sata: no device found, disabling link. [ 3.186457] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 3.208258] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 3.217875] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.244032] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.259987] mmc0: new high speed SDHC card at address 1234 [ 3.266135] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.282116] caam 2100000.caam: Entropy delay = 3200 [ 3.283436] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.336938] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.347890] caam 2100000.caam: Instantiated RNG4 SH0 [ 3.399985] mmc2: new DDR MMC card at address 0001 [ 3.407437] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.408654] caam 2100000.caam: Instantiated RNG4 SH1 [ 3.414711] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 3.417028] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4) [ 3.417043] caam 2100000.caam: job rings = 2, qi = 0 [ 3.424633] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 3.441611] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (244:0) [ 3.451111] mmcblk2: p1 p2 [ 3.456563] caam algorithms registered in /proc/crypto [ 3.467762] caam_jr 2101000.jr0: registering rng-caam [ 3.474377] usbcore: registered new interface driver usbhid [ 3.480036] usbhid: USB HID core driver [ 3.489677] imx-media: subdev ipu1_vdic bound [ 3.494413] imx-media: subdev ipu2_vdic bound [ 3.499259] imx-media: subdev ipu1_ic_prp bound [ 3.505208] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0 [ 3.513545] imx-media: subdev ipu1_ic_prpenc bound [ 3.518974] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1 [ 3.525912] imx-media: subdev ipu1_ic_prpvf bound [ 3.530847] imx-media: subdev ipu2_ic_prp bound [ 3.535924] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2 [ 3.543115] imx-media: subdev ipu2_ic_prpenc bound [ 3.548668] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3 [ 3.550752] hub 1-1:1.0: USB hub found [ 3.555605] imx-media: subdev ipu2_ic_prpvf bound [ 3.560225] hub 1-1:1.0: 4 ports detected [ 3.565616] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4 [ 3.574500] imx-media: subdev ipu1_csi0 bound [ 3.579635] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5 [ 3.585842] imx-media: subdev ipu1_csi1 bound [ 3.591006] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6 [ 3.597286] imx-media: subdev ipu2_csi0 bound [ 3.602304] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 3.608579] imx-media: subdev ipu2_csi1 bound [ 3.622001] sgtl5000 1-000a: Linked as a consumer to regulator.7 [ 3.628374] sgtl5000 1-000a: Linked as a consumer to regulator.8 [ 3.636270] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 3.646567] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 3.692493] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered [ 3.702449] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.757551] [drm] Cannot find any crtc or sizes [ 4.115934] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 4.139174] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 4.150754] NET: Registered protocol family 10 [ 4.158738] Segment Routing with IPv6 [ 4.162655] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.170474] NET: Registered protocol family 17 [ 4.174966] can: controller area network core (rev 20170425 abi 9) [ 4.181413] NET: Registered protocol family 29 [ 4.185889] can: raw protocol (rev 20170425) [ 4.190373] can: broadcast manager protocol (rev 20170425 t) [ 4.196083] can: netlink gateway (rev 20170425) max_hops=1 [ 4.202285] Key type dns_resolver registered [ 4.208499] cpu cpu0: Linked as a consumer to regulator.4 [ 4.214150] cpu cpu0: Linked as a consumer to regulator.5 [ 4.219835] cpu cpu0: Linked as a consumer to regulator.6 [ 4.230186] Registering SWP/SWPB emulation handler [ 4.236843] ------------[ cut here ]------------ [ 4.237490] ------------[ cut here ]------------ [ 4.241508] WARNING: CPU: 3 PID: 0 at include/trace/events/lock.h:13 lock_acquire+0x11c/0x1c4 [ 4.246120] WARNING: CPU: 0 PID: 0 at include/trace/events/lock.h:58 lock_release+0x2f0/0x340 [ 4.254631] Modules linked in: [ 4.263153] Modules linked in: [ 4.266209] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.19.306-cip107 #1 [ 4.275954] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 4.282500] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 4.290259] [] (show_stack) from [] (dump_stack+0xe0/0x114) [ 4.297578] [] (dump_stack) from [] (__warn.part.0+0x90/0xcc) [ 4.305068] [] (__warn.part.0) from [] (warn_slowpath_null+0x40/0x4c) [ 4.313250] [] (warn_slowpath_null) from [] (lock_acquire+0x11c/0x1c4) [ 4.321523] [] (lock_acquire) from [] (_raw_spin_lock+0x28/0x38) [ 4.329277] [] (_raw_spin_lock) from [] (imx6q_enter_wait+0x18/0xac) [ 4.337380] [] (imx6q_enter_wait) from [] (cpuidle_enter_state+0x16c/0x47c) [ 4.346092] [] (cpuidle_enter_state) from [] (do_idle+0x200/0x2d4) [ 4.354015] [] (do_idle) from [] (cpu_startup_entry+0x18/0x1c) [ 4.361591] [] (cpu_startup_entry) from [<101029ec>] (0x101029ec) [ 4.368556] irq event stamp: 12734 [ 4.368560] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.306-cip107 #1 [ 4.368565] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 4.371977] hardirqs last enabled at (12733): [] rcu_idle_exit+0x78/0x264 [ 4.378675] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 4.385191] hardirqs last disabled at (12734): [] do_idle+0x94/0x2d4 [ 4.392935] [] (show_stack) from [] (dump_stack+0xe0/0x114) [ 4.400675] softirqs last enabled at (12730): [] irq_enter+0x68/0x84 [ 4.407892] [] (dump_stack) from [] (__warn.part.0+0x90/0xcc) [ 4.415195] softirqs last disabled at (12729): [] irq_enter+0x54/0x84 [ 4.422501] [] (__warn.part.0) from [] (warn_slowpath_null+0x40/0x4c) [ 4.429975] ---[ end trace 0c8e465653d0d92d ]--- [ 4.437285] [] (warn_slowpath_null) from [] (lock_release+0x2f0/0x340) [ 4.458334] [] (lock_release) from [] (_raw_spin_unlock+0x18/0x24) [ 4.466260] [] (_raw_spin_unlock) from [] (imx6q_enter_wait+0x40/0xac) [ 4.474534] [] (imx6q_enter_wait) from [] (cpuidle_enter_state+0x16c/0x47c) [ 4.483241] [] (cpuidle_enter_state) from [] (do_idle+0x200/0x2d4) [ 4.491167] [] (do_idle) from [] (cpu_startup_entry+0x18/0x1c) [ 4.498749] [] (cpu_startup_entry) from [] (start_kernel+0x3b0/0x46c) [ 4.506934] [] (start_kernel) from [<00000000>] ( (null)) [ 4.513290] irq event stamp: 18768 [ 4.516697] hardirqs last enabled at (18767): [] __irq_svc+0x74/0x98 [ 4.524009] hardirqs last disabled at (18768): [] do_idle+0x94/0x2d4 [ 4.531235] softirqs last enabled at (18766): [] __do_softirq+0x2e0/0x4e0 [ 4.538982] softirqs last disabled at (18761): [] irq_exit+0x13c/0x1c8 [ 4.546379] ---[ end trace 0c8e465653d0d92e ]--- [ 4.552168] Loading compiled-in X.509 certificates [ 4.623594] imx-media: subdev ipu1_csi0_mux bound [ 4.629196] imx-media: subdev ipu2_csi1_mux bound [ 4.634117] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0 [ 4.639092] imx-media: ipu2_csi1:1 -> ipu2_vdic:0 [ 4.643830] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0 [ 4.648942] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0 [ 4.653839] imx-media: ipu2_csi0:1 -> ipu2_vdic:0 [ 4.658618] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 [ 4.663514] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 [ 4.668288] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 4.673182] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 4.677968] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0 [ 4.683048] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0 [ 4.688426] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0 [ 4.693671] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 4.699044] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 4.704287] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0 [ 4.709215] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 4.722264] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 4.737695] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 4.747169] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.794639] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.804360] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 4.813581] ALSA device list: [ 4.816573] #0: imx6-wandboard-sgtl5000 [ 4.820715] #1: imx-spdif [ 4.824290] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 U{�S����[ 4.835980] Freeing unused kernel memory: 1024K [ 4.927797] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 5.213846] udevd[183]: starting version 3.2.9 [ 5.220657] random: udevd: uninitialized urandom read (16 bytes read) [ 5.228685] random: udevd: uninitialized urandom read (16 bytes read) [ 5.235272] random: udevd: uninitialized urandom read (16 bytes read) [ 5.251688] udevd[183]: specified user 'tss' unknown [ 5.257420] udevd[183]: specified group 'tss' unknown [ 5.268570] udevd[184]: starting eudev-3.2.9 [ 5.806617] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 5.816963] coda 2040000.vpu: Direct firmware load for vpu/vpu_fw_imx6q.bin failed with error -2 [ 5.828553] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6q.bin failed with error -2 [ 5.837536] coda 2040000.vpu: firmware request failed done Saving random seed: OK Starting network: OK Starting dropbear sshd: [ 6.374858] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1034629/environment . /lava-1034629/environment / # /lava-1034629/bin/lava-test-runner /lava-1034629/0 /lava-1034629/bin/lava-test-runner /lava-1034629/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1034629/0/tests/0_dmesg + cat uuid + UUID=1034629_1.5.2.3.1[ 7.051586] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 7.140517] [ 7.218128] [ 7.296998] + set +x[ 7.307743] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1034629/environment / # . /lava-1034629/environment/lava-1034629/bin/lava-test-runner /lava-1034629/1 / # /lava-1034629/bin/lava-test-runner /lava-1034629/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1034629/1/tests/1_bootrr + cat uuid + UUID=1034629_1.5.2.3.5 [ 7.862712] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1034629/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-1034629/1/../bin/lava-test-case [ 9.001879] /lava-1034629/1/../bin/lava-test-case [ 9.081830] /lava-1034629/1/../bin/lava-test-case [ 9.127249] + set +x[ 9.159894] / #