connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/899779/tftp-deploy-o7c4qyns/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/899779/tftp-deploy-o7c4qyns/dtb/imx6dl-riotboard.dtb /mnt/tftp/899779/tftp-deploy-o7c4qyns/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/899779/tftp-deploy-o7c4qyns/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/899779/tftp-deploy-o7c4qyns/dtb/imx6dl-riotboard.dtb /mnt/tftp/899779/tftp-deploy-o7c4qyns/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address 9e:84:4b:fc:71:d3 eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.120 Loading ARM Linux zImage '/mnt/tftp/899779/tftp-deploy-o7c4qyns/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12000000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/899779/tftp-deploy-o7c4qyns/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18a87f97 Loading devicetree from '/mnt/tftp/899779/tftp-deploy-o7c4qyns/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 Starting kernel at 0x12000000, initrd at 0x18000000, oftree at 0x18a88000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.302-cip72-rt42 (KernelCI@build-j994541-arm-gcc-10-multi-v7-defconfig-8frfv) (gcc version 10.2.1 20210110 (Debian 10.2.1-6) ) #1 SMP Tue Feb 7 07:00:01 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: RIoTboard i.MX6S [ 0.000000] cma: Reserved 64 MiB at 0x4b800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef7d1000 s15180 r8192 d21684 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 946992K/1048576K available (8653K kernel code, 986K rwdata, 3872K rodata, 1052K init, 320K bss, 36048K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0e447f0 (12530 kB) [ 0.000000] .init : 0xc0e45000 - 0xc0f4c000 (1052 kB) [ 0.000000] .data : 0xc0f4c000 - 0xc1042b00 ( 987 kB) [ 0.000000] .bss : 0xc1045000 - 0xc1095258 ( 321 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000025] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002222] Console: colour dummy device 80x30 [ 0.002248] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=15000) [ 0.002261] pid_max: default: 32768 minimum: 301 [ 0.002371] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002383] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003028] CPU: Testing write buffer coherency: ok [ 0.003061] CPU0: Spectre v2: using BPIALL workaround [ 0.003328] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003407] Setting up static identity map for 0x10209000 - 0x10209098 [ 0.006606] Brought up 1 CPUs [ 0.006619] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.006628] CPU: All CPU(s) started in SVC mode. [ 0.007372] devtmpfs: initialized [ 0.014486] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.015183] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.015210] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.017663] pinctrl core: initialized pinctrl subsystem [ 0.019540] NET: Registered protocol family 16 [ 0.022297] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.023848] cpuidle: using governor ladder [ 0.023862] cpuidle: using governor menu [ 0.024086] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.044099] No ATAGs? [ 0.044127] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.044136] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.046893] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.049136] Serial: AMBA PL011 UART driver [ 0.050949] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 0.063223] mxs-dma 110000.dma-apbh: initialized [ 0.068228] vgaarb: loaded [ 0.069157] SCSI subsystem initialized [ 0.069651] usbcore: registered new interface driver usbfs [ 0.069709] usbcore: registered new interface driver hub [ 0.069752] usbcore: registered new device driver usb [ 0.071493] pps_core: LinuxPPS API ver. 1 registered [ 0.071502] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.071531] PTP clock support registered [ 0.071769] EDAC MC: Ver: 3.0.0 [ 0.074229] clocksource: Switched to clocksource mxc_timer1 [ 0.084059] NET: Registered protocol family 2 [ 0.084205] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.085234] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.085317] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.085452] TCP: Hash tables configured (established 8192 bind 8192) [ 0.085596] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.085633] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.085824] NET: Registered protocol family 1 [ 0.086212] RPC: Registered named UNIX socket transport module. [ 0.086223] RPC: Registered udp transport module. [ 0.086231] RPC: Registered tcp transport module. [ 0.086237] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.086750] Unpacking initramfs... [ 0.987609] Freeing initrd memory: 10784K [ 0.988020] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.000038] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.000905] NFS: Registering the id_resolver key type [ 1.000940] Key type id_resolver registered [ 1.000947] Key type id_legacy registered [ 1.001024] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.002559] bounce: pool size: 64 pages [ 1.002794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.002819] io scheduler noop registered [ 1.002833] io scheduler deadline registered [ 1.002876] io scheduler cfq registered (default) [ 1.023595] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.023614] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.078068] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.080590] SuperH (H)SCI(F) driver initialized [ 1.081182] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 22, base_baud = 5000000) is a IMX [ 1.081860] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 293, base_baud = 5000000) is a IMX [ 1.737673] console [ttymxc1] enabled [ 1.741852] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 294, base_baud = 5000000) is a IMX [ 1.751067] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 295, base_baud = 5000000) is a IMX [ 1.760293] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 296, base_baud = 5000000) is a IMX [ 1.769953] msm_serial: driver initialized [ 1.774750] STMicroelectronics ASC driver initialized [ 1.781684] [drm] Initialized drm 1.1.0 20060810 [ 1.796005] loop: module loaded [ 1.807610] CAN device driver interface [ 1.813638] 2188000.ethernet supply phy not found, using dummy regulator [ 1.829505] pps pps0: new PPS source ptp0 [ 1.852604] fec 2188000.ethernet eth0: registered PHC device 0 [ 1.858938] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.865937] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.875025] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.882503] usbcore: registered new interface driver pegasus [ 1.888255] usbcore: registered new interface driver asix [ 1.893725] usbcore: registered new interface driver ax88179_178a [ 1.899889] usbcore: registered new interface driver cdc_ether [ 1.905814] usbcore: registered new interface driver smsc75xx [ 1.911640] usbcore: registered new interface driver smsc95xx [ 1.917453] usbcore: registered new interface driver net1080 [ 1.923172] usbcore: registered new interface driver cdc_subset [ 1.929154] usbcore: registered new interface driver zaurus [ 1.934822] usbcore: registered new interface driver cdc_ncm [ 1.942332] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.948899] ehci-pci: EHCI PCI platform driver [ 1.953418] ehci-platform: EHCI generic platform driver [ 1.958911] ehci-omap: OMAP-EHCI Host Controller driver [ 1.964332] ehci-orion: EHCI orion driver [ 1.968503] SPEAr-ehci: EHCI SPEAr driver [ 1.972695] ehci-st: EHCI STMicroelectronics driver [ 1.977762] ehci-exynos: EHCI EXYNOS driver [ 1.982149] ehci-atmel: EHCI Atmel driver [ 1.986335] tegra-ehci: Tegra EHCI driver [ 1.990545] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.996767] ohci-pci: OHCI PCI platform driver [ 2.001285] ohci-platform: OHCI generic platform driver [ 2.006724] ohci-omap3: OHCI OMAP3 driver [ 2.010922] SPEAr-ohci: OHCI SPEAr driver [ 2.015120] ohci-st: OHCI STMicroelectronics driver [ 2.020183] ohci-atmel: OHCI Atmel driver [ 2.024824] usbcore: registered new interface driver usb-storage [ 2.036114] ci_hdrc ci_hdrc.0: doesn't support gadget [ 2.041217] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.046148] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.059243] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.065461] hub 1-0:1.0: USB hub found [ 2.069307] hub 1-0:1.0: 1 port detected [ 2.073850] 2184200.usb supply vbus not found, using dummy regulator [ 2.083719] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.088660] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 2.104259] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.110479] hub 2-0:1.0: USB hub found [ 2.114320] hub 2-0:1.0: 1 port detected [ 2.119351] mousedev: PS/2 mouse device common for all mice [ 2.129350] i2c /dev entries driver [ 2.142374] sdhci: Secure Digital Host Controller Interface driver [ 2.148583] sdhci: Copyright(c) Pierre Ossman [ 2.154936] Synopsys Designware Multimedia Card Interface Driver [ 2.162153] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.168671] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 2.177862] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 2.183031] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 2.188567] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 2.229362] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.237169] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 2.246357] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 2.251535] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO [ 2.258939] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found [ 2.299366] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 2.307133] sdhci-esdhc-imx 219c000.usdhc: could not get ultra high speed state, work on normal mode [ 2.318669] sdhci-esdhc-imx 219c000.usdhc: No vqmmc regulator found [ 2.359249] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 2.369021] ledtrig-cpu: registered to indicate activity on CPUs [ 2.375292] usbcore: registered new interface driver usbhid [ 2.380890] usbhid: USB HID core driver [ 2.389644] NET: Registered protocol family 10 [ 2.394668] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 2.405757] sit: IPv6 over IPv4 tunneling driver [ 2.411051] NET: Registered protocol family 17 [ 2.415545] can: controller area network core (rev 20120528 abi 9) [ 2.421977] NET: Registered protocol family 29 [ 2.426463] can: raw protocol (rev 20120528) [ 2.430759] can: broadcast manager protocol (rev 20120528 t) [ 2.436451] can: netlink gateway (rev 20130117) max_hops=1 [ 2.442407] Key type dns_resolver registered [ 2.446804] ThumbEE CPU extension supported. [ 2.451112] Registering SWP/SWPB emulation handler [ 2.471422] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.481226] hctosys: unable to open rtc device (rtc0) [ 2.495237] 2P5V: disabling [ 2.503124] Freeing unused kernel memory: 1052K [ 2.531603] hub 2-1:1.0: USB hub found [ 2.538134] hub 2-1:1.0: 4 ports detected [ 2.548985] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.560530] mmc2: unspecified timeout for CMD6 - use generic [ 2.573283] mmc2: unspecified timeout for CMD6 - use generic [ 2.583179] devpts: called with bogus options [ 2.587695] mmc2: Card stuck in programming state! __mmc_switch [ 2.596787] mmc2: unspecified timeout for CMD6 - use generic [ 2.606328] mmc2: new high speed MMC card at address 0001 [ 2.619388] mmcblk0: mmc2:0001 MMC04G 3.58 GiB [ 2.627714] mmcblk0boot0: mmc2:0001 MMC04G partition 1 2.00 MiB [ 2.641298] mmcblk0boot1: mmc2:0001 MMC04G partition 2 2.00 MiB [ 2.652356] mmcblk0rpmb: mmc2:0001 MMC04G partition 3 128 KiB Starting syslogd: OK [ 2.673103] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 2.682565] mmcblk0: retrying using single block read Starting klogd: [ 2.699752] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 2.709032] blk_update_request: I/O error, dev mmcblk0, sector 0 OK Running sysctl: [ 2.761636] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 2.770917] blk_update_request: I/O error, dev mmcblk0, sector 1 OK Populating /dev using udev: [ 2.799466] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 2.808740] blk_update_request: I/O error, dev mmcblk0, sector 2 [ 2.818660] udevd[95]: starting version 3.2.9 [ 2.824118] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.833548] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 2.842823] blk_update_request: I/O error, dev mmcblk0, sector 3 [ 2.849521] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.858665] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.867943] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 2.877207] blk_update_request: I/O error, dev mmcblk0, sector 4 [ 2.892623] udevd[95]: specified user 'tss' unknown [ 2.897658] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 2.906927] blk_update_request: I/O error, dev mmcblk0, sector 5 [ 2.913515] udevd[95]: specified group 'tss' unknown [ 2.922226] udevd[96]: starting eudev-3.2.9 [ 2.934904] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 2.944192] blk_update_request: I/O error, dev mmcblk0, sector 6 [ 2.969366] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 2.978629] blk_update_request: I/O error, dev mmcblk0, sector 7 [ 2.984666] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.029323] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 3.038767] mmcblk0: retrying using single block read [ 3.103055] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 3.112344] blk_update_request: I/O error, dev mmcblk0, sector 0 [ 3.174378] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 3.183652] blk_update_request: I/O error, dev mmcblk0, sector 1 [ 3.243794] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 3.285312] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 3.326146] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 3.368085] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 3.410742] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 3.452126] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 3.461417] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.468829] mmcblk0: unable to read partition table [ 3.490448] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 3.725672] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 3.735648] mmcblk0: retrying using single block read [ 3.769337] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 3.788635] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 3.816651] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 3.854151] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 3.890835] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 3.925112] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 3.963659] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 3.999016] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.036063] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 4.046048] mmcblk0: retrying using single block read [ 4.090760] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 4.127160] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 4.163565] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 4.198882] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 4.234326] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 4.270854] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 4.307917] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 4.346122] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.355941] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 4.368726] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.378879] mmcblk0boot0: retrying using single block read [ 4.423569] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.459369] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.496227] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.534337] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.568036] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.605882] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.643874] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.680789] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.691679] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.701826] mmcblk0boot1: retrying using single block read [ 4.744895] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.781919] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.800582] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.811015] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.821439] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.831860] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.842274] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.852665] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.863412] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.873538] mmcblk0boot0: retrying using single block read [ 4.879500] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.889894] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.900297] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.910690] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.921096] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.931484] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.941884] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.952226] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.961087] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.971036] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read [ 4.980728] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.990868] mmcblk0boot1: retrying using single block read [ 4.996847] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.007268] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.017682] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.028082] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.038487] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.048887] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.059297] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.069686] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.079637] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 5.322872] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.332837] mmcblk0: retrying using single block read [ 5.338435] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.348730] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.359023] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.369403] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.379714] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.390010] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.400321] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.410571] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.419452] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.429930] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.439885] mmcblk0: retrying using single block read [ 5.445477] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.455704] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.464562] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.474788] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.483640] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.493911] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.504232] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.514537] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.524848] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.535156] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.544929] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 5.557358] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.567507] mmcblk0boot1: retrying using single block read [ 5.575456] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.585890] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.596310] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.606726] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.617133] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.627523] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.637925] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.648266] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.657123] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.667775] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.677902] mmcblk0boot0: retrying using single block read [ 5.683871] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.694431] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.704828] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.715232] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.725573] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.734432] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.744826] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.755232] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.765641] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.776379] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.786504] mmcblk0boot1: retrying using single block read [ 5.792470] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.802860] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.813263] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.823646] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.834058] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.844461] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.854801] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.863648] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.874035] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.883984] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 5.893516] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.903656] mmcblk0boot0: retrying using single block read [ 5.909630] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.920040] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.930449] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.940840] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.951242] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.961585] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.970458] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.980854] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.991261] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 6.001209] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read done Saving random seed: [ 6.033284] random: dd: uninitialized urandom read (512 bytes read, 9 bits of entropy available) OK Starting network: OK Starting dropbear sshd: [ 6.129971] random: dropbear: uninitialized urandom read (32 bytes read, 9 bits of entropy available) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-899779/environment . /lava-899779/environment / # /lava-899779/bin/lava-test-runner /lava-899779/0 /lava-899779/bin/lava-test-runner /lava-899779/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-899779/0/tests/0_dmesg + cat uuid [ 6.702030] + UUID=899779_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.748946] [ 6.792691] [ 6.836743] + set +x [ 6.846448] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-899779/environment / # . /lava-899779/environment/lava-899779/bin/lava-test-runner /lava-899779/1 / # /lava-899779/bin/lava-test-runner /lava-899779/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-899779/1/tests/1_bootrr + cat uuid [ 7.330602] + UUID=899779_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-899779/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-899779/1/../bin/lava-test-case [ 7.365363] /lava-899779/1/../bin/lava-test-case [ 7.404917] /lava-899779/1/../bin/lava-test-case [ 7.429746] + set +x [ 7.448494] / #