connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1035179/tftp-deploy-p47ageyh/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1035179/tftp-deploy-p47ageyh/dtb/imx6dl-riotboard.dtb /mnt/tftp/1035179/tftp-deploy-p47ageyh/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1035179/tftp-deploy-p47ageyh/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1035179/tftp-deploy-p47ageyh/dtb/imx6dl-riotboard.dtb /mnt/tftp/1035179/tftp-deploy-p47ageyh/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address 82:f7:9c:28:47:7e eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.99 Loading ARM Linux zImage '/mnt/tftp/1035179/tftp-deploy-p47ageyh/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12000000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1035179/tftp-deploy-p47ageyh/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18a89a07 Loading devicetree from '/mnt/tftp/1035179/tftp-deploy-p47ageyh/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 loglevel=13 Starting kernel at 0x12000000, initrd at 0x18000000, oftree at 0x18a8a000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.302-cip85-rt48 (KernelCI@build-j144511-arm-gcc-10-multi-v7-defconfig-f7m4w) (gcc version 10.2.1 20210110 (Debian 10.2.1-6) ) #1 SMP Mon Mar 18 10:50:58 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: RIoTboard i.MX6S [ 0.000000] cma: Reserved 64 MiB at 0x4b800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c1042dc0, node_mem_map ef7f8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef7d1000 s15180 r8192 d21684 u45056 [ 0.000000] pcpu-alloc: s15180 r8192 d21684 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 loglevel=13 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 946976K/1048576K available (8662K kernel code, 987K rwdata, 3876K rodata, 1048K init, 320K bss, 36064K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0e478bc (12543 kB) [ 0.000000] .init : 0xc0e48000 - 0xc0f4e000 (1048 kB) [ 0.000000] .data : 0xc0f4e000 - 0xc1044da0 ( 988 kB) [ 0.000000] .bss : 0xc1047000 - 0xc1097250 ( 321 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000006] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000022] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002147] Console: colour dummy device 80x30 [ 0.002174] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=15000) [ 0.002187] pid_max: default: 32768 minimum: 301 [ 0.002296] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002308] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002953] CPU: Testing write buffer coherency: ok [ 0.002987] CPU0: Spectre v2: using BPIALL workaround [ 0.003252] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003330] Setting up static identity map for 0x10209000 - 0x10209098 [ 0.006517] Brought up 1 CPUs [ 0.006531] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.006538] CPU: All CPU(s) started in SVC mode. [ 0.007280] devtmpfs: initialized [ 0.014481] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.015188] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.015218] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.017689] pinctrl core: initialized pinctrl subsystem [ 0.019581] NET: Registered protocol family 16 [ 0.022395] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.024001] cpuidle: using governor ladder [ 0.024016] cpuidle: using governor menu [ 0.024253] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.044304] No ATAGs? [ 0.044334] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.044342] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.047177] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.049489] Serial: AMBA PL011 UART driver [ 0.051277] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 0.063661] mxs-dma 110000.dma-apbh: initialized [ 0.068704] vgaarb: loaded [ 0.069646] SCSI subsystem initialized [ 0.069812] libata version 3.00 loaded. [ 0.070098] usbcore: registered new interface driver usbfs [ 0.070156] usbcore: registered new interface driver hub [ 0.070198] usbcore: registered new device driver usb [ 0.071946] pps_core: LinuxPPS API ver. 1 registered [ 0.071956] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.071983] PTP clock support registered [ 0.072210] EDAC MC: Ver: 3.0.0 [ 0.074730] clocksource: Switched to clocksource mxc_timer1 [ 0.084563] NET: Registered protocol family 2 [ 0.084707] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.085729] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.085812] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.085946] TCP: Hash tables configured (established 8192 bind 8192) [ 0.086091] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.086127] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.086314] NET: Registered protocol family 1 [ 0.086705] RPC: Registered named UNIX socket transport module. [ 0.086716] RPC: Registered udp transport module. [ 0.086722] RPC: Registered tcp transport module. [ 0.086729] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.086759] PCI: CLS 0 bytes, default 64 [ 0.087230] Unpacking initramfs... [ 0.985005] Freeing initrd memory: 10792K [ 0.985409] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.997512] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.998394] NFS: Registering the id_resolver key type [ 0.998430] Key type id_resolver registered [ 0.998438] Key type id_legacy registered [ 0.998517] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.000195] bounce: pool size: 64 pages [ 1.000420] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.000436] io scheduler noop registered [ 1.000448] io scheduler deadline registered [ 1.000487] io scheduler cfq registered (default) [ 1.021334] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.021352] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.076177] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.078667] SuperH (H)SCI(F) driver initialized [ 1.079254] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 22, base_baud = 5000000) is a IMX [ 1.079971] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 293, base_baud = 5000000) is a IMX [ 1.783548] console [ttymxc1] enabled [ 1.787723] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 294, base_baud = 5000000) is a IMX [ 1.796944] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 295, base_baud = 5000000) is a IMX [ 1.806152] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 296, base_baud = 5000000) is a IMX [ 1.815799] msm_serial: driver initialized [ 1.820617] STMicroelectronics ASC driver initialized [ 1.827538] [drm] Initialized drm 1.1.0 20060810 [ 1.841911] loop: module loaded [ 1.853444] CAN device driver interface [ 1.859468] 2188000.ethernet supply phy not found, using dummy regulator [ 1.875012] pps pps0: new PPS source ptp0 [ 1.897933] fec 2188000.ethernet eth0: registered PHC device 0 [ 1.904255] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.911254] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.920357] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.927836] usbcore: registered new interface driver pegasus [ 1.933586] usbcore: registered new interface driver asix [ 1.939054] usbcore: registered new interface driver ax88179_178a [ 1.945216] usbcore: registered new interface driver cdc_ether [ 1.951139] usbcore: registered new interface driver smsc75xx [ 1.956972] usbcore: registered new interface driver smsc95xx [ 1.962783] usbcore: registered new interface driver net1080 [ 1.968505] usbcore: registered new interface driver cdc_subset [ 1.974490] usbcore: registered new interface driver zaurus [ 1.980165] usbcore: registered new interface driver cdc_ncm [ 1.987664] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.994231] ehci-pci: EHCI PCI platform driver [ 1.998749] ehci-platform: EHCI generic platform driver [ 2.004240] ehci-omap: OMAP-EHCI Host Controller driver [ 2.009658] ehci-orion: EHCI orion driver [ 2.013843] SPEAr-ehci: EHCI SPEAr driver [ 2.018033] ehci-st: EHCI STMicroelectronics driver [ 2.023091] ehci-exynos: EHCI EXYNOS driver [ 2.027480] ehci-atmel: EHCI Atmel driver [ 2.031665] tegra-ehci: Tegra EHCI driver [ 2.035874] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.042097] ohci-pci: OHCI PCI platform driver [ 2.046619] ohci-platform: OHCI generic platform driver [ 2.052058] ohci-omap3: OHCI OMAP3 driver [ 2.056261] SPEAr-ohci: OHCI SPEAr driver [ 2.060458] ohci-st: OHCI STMicroelectronics driver [ 2.065514] ohci-atmel: OHCI Atmel driver [ 2.070149] usbcore: registered new interface driver usb-storage [ 2.081428] ci_hdrc ci_hdrc.0: doesn't support gadget [ 2.086532] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.091460] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.104744] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.110974] hub 1-0:1.0: USB hub found [ 2.114819] hub 1-0:1.0: 1 port detected [ 2.119355] 2184200.usb supply vbus not found, using dummy regulator [ 2.129222] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.134162] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 2.149760] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.155964] hub 2-0:1.0: USB hub found [ 2.159810] hub 2-0:1.0: 1 port detected [ 2.164837] mousedev: PS/2 mouse device common for all mice [ 2.174856] i2c /dev entries driver [ 2.187729] sdhci: Secure Digital Host Controller Interface driver [ 2.193937] sdhci: Copyright(c) Pierre Ossman [ 2.200264] Synopsys Designware Multimedia Card Interface Driver [ 2.207474] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.213972] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 2.223161] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 2.228328] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 2.233861] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 2.274866] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.282668] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 2.291864] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 2.297033] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO [ 2.304432] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found [ 2.344877] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 2.352631] sdhci-esdhc-imx 219c000.usdhc: could not get ultra high speed state, work on normal mode [ 2.364165] sdhci-esdhc-imx 219c000.usdhc: No vqmmc regulator found [ 2.404751] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 2.414523] ledtrig-cpu: registered to indicate activity on CPUs [ 2.420795] usbcore: registered new interface driver usbhid [ 2.426391] usbhid: USB HID core driver [ 2.435098] NET: Registered protocol family 10 [ 2.440125] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 2.451211] sit: IPv6 over IPv4 tunneling driver [ 2.456510] NET: Registered protocol family 17 [ 2.461006] can: controller area network core (rev 20120528 abi 9) [ 2.467436] NET: Registered protocol family 29 [ 2.471922] can: raw protocol (rev 20120528) [ 2.476217] can: broadcast manager protocol (rev 20120528 t) [ 2.481912] can: netlink gateway (rev 20130117) max_hops=1 [ 2.487876] Key type dns_resolver registered [ 2.492276] ThumbEE CPU extension supported. [ 2.496584] Registering SWP/SWPB emulation handler [ 2.516897] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.526700] hctosys: unable to open rtc device (rtc0) [ 2.540544] 2P5V: disabling [ 2.548463] Freeing unused kernel memory: 1048K [ 2.577134] hub 2-1:1.0: USB hub found [ 2.583637] hub 2-1:1.0: 4 ports detected [ 2.594402] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.606038] mmc2: unspecified timeout for CMD6 - use generic [ 2.618807] mmc2: unspecified timeout for CMD6 - use generic [ 2.628785] devpts: called with bogus options [ 2.633306] mmc2: Card stuck in programming state! __mmc_switch [ 2.642444] mmc2: unspecified timeout for CMD6 - use generic [ 2.652023] mmc2: new high speed MMC card at address 0001 [ 2.664936] mmcblk0: mmc2:0001 MMC04G 3.58 GiB [ 2.673572] mmcblk0boot0: mmc2:0001 MMC04G partition 1 2.00 MiB [ 2.687371] mmcblk0boot1: mmc2:0001 MMC04G partition 2 2.00 MiB [ 2.698490] mmcblk0rpmb: mmc2:0001 MMC04G partition 3 128 KiB Starting syslogd: OK [ 2.719180] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 2.728646] mmcblk0: retrying using single block read Starting klogd: [ 2.745928] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 2.755207] blk_update_request: I/O error, dev mmcblk0, sector 0 OK Running sysctl: [ 2.802841] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 2.812124] blk_update_request: I/O error, dev mmcblk0, sector 1 OK Populating /dev using udev: [ 2.844909] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 2.854179] blk_update_request: I/O error, dev mmcblk0, sector 2 [ 2.866324] udevd[95]: starting version 3.2.9 [ 2.871722] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.881144] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 2.890419] blk_update_request: I/O error, dev mmcblk0, sector 3 [ 2.897006] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.906163] random: udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 2.915450] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 2.924713] blk_update_request: I/O error, dev mmcblk0, sector 4 [ 2.940174] udevd[95]: specified user 'tss' unknown [ 2.945214] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 2.954481] blk_update_request: I/O error, dev mmcblk0, sector 5 [ 2.961079] udevd[95]: specified group 'tss' unknown [ 2.969564] udevd[96]: starting eudev-3.2.9 [ 2.984824] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 2.994097] blk_update_request: I/O error, dev mmcblk0, sector 6 [ 3.014872] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 3.024143] blk_update_request: I/O error, dev mmcblk0, sector 7 [ 3.030183] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.079950] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 3.089398] mmcblk0: retrying using single block read [ 3.152637] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 3.161926] blk_update_request: I/O error, dev mmcblk0, sector 0 [ 3.220738] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 3.230024] blk_update_request: I/O error, dev mmcblk0, sector 1 [ 3.291099] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 3.335672] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 3.376596] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 3.420627] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 3.460315] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 3.501646] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 3.510935] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 3.518341] mmcblk0: unable to read partition table [ 3.537864] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 3.780735] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 3.790707] mmcblk0: retrying using single block read [ 3.819838] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 3.837814] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 3.871010] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 3.906077] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 3.942760] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 3.979358] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 4.016054] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 4.050557] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.089448] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 4.099426] mmcblk0: retrying using single block read [ 4.144828] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 4.179829] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 4.217194] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 4.253763] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 4.289832] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 4.326146] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 4.363128] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 4.398233] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 4.408052] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 4.420750] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.430899] mmcblk0boot0: retrying using single block read [ 4.475681] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.511550] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.548735] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.584375] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.622276] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.659088] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.696063] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.732909] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.743811] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.753959] mmcblk0boot1: retrying using single block read [ 4.796281] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.833111] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.851844] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.862281] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.872706] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 4.883126] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 4.893544] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 4.903887] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.912754] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 4.923403] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 4.933533] mmcblk0boot0: retrying using single block read [ 4.939509] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 4.949911] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 4.960299] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 4.970706] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 4.981050] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 4.989928] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.000278] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.009202] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.019605] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.030019] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.039967] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read [ 5.049598] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.059749] mmcblk0boot1: retrying using single block read [ 5.065730] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.076140] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.086555] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.096950] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.107353] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.117695] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.126552] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.136939] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.147344] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.157291] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 5.401221] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.411187] mmcblk0: retrying using single block read [ 5.416794] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.427078] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.437367] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.447592] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.456459] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.466761] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.477076] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.487375] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.497683] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.508153] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0xb00 [ 5.518104] mmcblk0: retrying using single block read [ 5.523701] mmcblk0: error -84 transferring data, sector 7503744, nr 8, cmd response 0x900, card status 0x0 [ 5.533929] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.542803] mmcblk0: error -84 transferring data, sector 7503745, nr 7, cmd response 0x900, card status 0x0 [ 5.553081] mmcblk0: error -84 transferring data, sector 7503746, nr 6, cmd response 0x900, card status 0x0 [ 5.563365] mmcblk0: error -84 transferring data, sector 7503747, nr 5, cmd response 0x900, card status 0x0 [ 5.573610] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.582465] mmcblk0: error -84 transferring data, sector 7503748, nr 4, cmd response 0x900, card status 0x0 [ 5.592764] mmcblk0: error -84 transferring data, sector 7503749, nr 3, cmd response 0x900, card status 0x0 [ 5.603074] mmcblk0: error -84 transferring data, sector 7503750, nr 2, cmd response 0x900, card status 0x0 [ 5.613370] mmcblk0: error -84 transferring data, sector 7503751, nr 1, cmd response 0x900, card status 0x0 [ 5.623145] Buffer I/O error on dev mmcblk0, logical block 937968, async page read [ 5.635652] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.645798] mmcblk0boot1: retrying using single block read [ 5.653612] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.664049] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.674475] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.684928] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.695322] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.705730] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.716118] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.726516] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.737152] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.747279] mmcblk0boot0: retrying using single block read [ 5.753249] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.763596] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.772543] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.782892] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.791767] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.802114] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.810971] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.821361] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.831768] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.842111] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.850965] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.861357] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.872090] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.882219] mmcblk0boot1: retrying using single block read [ 5.888189] mmcblk0boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 5.898580] mmcblk0boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 5.908985] mmcblk0boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 5.919325] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 5.928189] mmcblk0boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 5.938577] mmcblk0boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 5.948981] mmcblk0boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 5.959370] mmcblk0boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 5.969780] mmcblk0boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 5.979733] Buffer I/O error on dev mmcblk0boot1, logical block 496, async page read [ 5.989271] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb00 [ 5.999410] mmcblk0boot0: retrying using single block read [ 6.005395] mmcblk0boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 6.015806] mmcblk0boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 6.026218] mmcblk0boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 6.036623] mmcblk0boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 6.047030] mmcblk0boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 6.057371] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 6.066235] mmcblk0boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 6.076577] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 6.085428] mmcblk0boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 6.095771] mmc2: Got data interrupt 0x00000002 even though no data operation was in progress. [ 6.104623] mmcblk0boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 6.114569] Buffer I/O error on dev mmcblk0boot0, logical block 496, async page read done Saving random seed: [ 6.146376] random: dd: uninitialized urandom read (512 bytes read, 9 bits of entropy available) OK Starting network: OK Starting dropbear sshd: [ 6.243546] random: dropbear: uninitialized urandom read (32 bytes read, 9 bits of entropy available) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1035179/environment . /lava-1035179/environment / # /lava-1035179/bin/lava-test-runner /lava-1035179/0 /lava-1035179/bin/lava-test-runner /lava-1035179/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1035179/0/tests/0_dmesg + cat uuid [ 6.810213] + UUID=1035179_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.858171] [ 6.902542] [ 6.947367] + set +x [ 6.957073] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1035179/environment / # . /lava-1035179/environment/lava-1035179/bin/lava-test-runner /lava-1035179/1 / # /lava-1035179/bin/lava-test-runner /lava-1035179/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1035179/1/tests/1_bootrr + cat uuid [ 7.435420] + UUID=1035179_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1035179/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1035179/1/../bin/lava-test-case [ 7.470343] /lava-1035179/1/../bin/lava-test-case [ 7.510417] /lava-1035179/1/../bin/lava-test-case [ 7.535354] + set +x [ 7.554282] / #