Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2018.11-rc2-00101-g1ed3c0954b (Oct 25 2018 - 13:13:23 +0200) OMAP4430-GP ES2.1 Trying to boot from MMC1 SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! U-Boot 2018.11-rc2-00101-g1ed3c0954b (Oct 25 2018 - 13:13:23 +0200) CPU : OMAP4430-GP ES2.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Loading Environment from FAT... Unable to use mmc 0:1... Net: No ethernet found. Hit any key to stop autoboot: 2  0 => usb start usb start starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 DHCP client bound to address 10.201.3.110 (9 ms) => setenv serverip 10.201.1.8 setenv serverip 10.201.1.8 => tftp 0x82000000 2309612/tftp-deploy-yf3doaeh/kernel/zImage tftp 0x82000000 2309612/tftp-deploy-yf3doaeh/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 10.201.1.8; our IP address is 10.201.3.110 Filename '2309612/tftp-deploy-yf3doaeh/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 748 KiB/s done Bytes transferred = 4587600 (460050 hex) => tftp 0x84000000 2309612/tftp-deploy-yf3doaeh/ramdisk/ramdisk.cpio.gz.uboot tftp 0x84000000 2309612/tftp-deploy-yf3doaeh/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 10.201.1.8; our IP address is 10.201.3.110 Filename '2309612/tftp-deploy-yf3doaeh/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x84000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 558.6 KiB/s done Bytes transferred = 14137619 (d7b913 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x83f00000 2309612/tftp-deploy-yf3doaeh/dtb/omap4-panda.dtb tftp 0x83f00000 2309612/tftp-deploy-yf3doaeh/dtb/omap4-panda.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 10.201.1.8; our IP address is 10.201.3.110 Filename '2309612/tftp-deploy-yf3doaeh/dtb/omap4-panda.dtb'. Load address: 0x83f00000 Loading: *###### 42 KiB/s done Bytes transferred = 86562 (15222 hex) => setenv bootargs 'console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x84000000 0x83f00000 bootz 0x82000000 0x84000000 0x83f00000 ## Loading init Ramdisk from Legacy Image at 84000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 14137555 Bytes = 13.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83f00000 Booting using the fdt blob at 0x83f00000 Using Device Tree in place at 83f00000, end 83f18221 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.131-cip13 (KernelCI@build-j438198-arm-gcc-10-omap2plus-defconfig-t22ld) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Aug 2 19:15:29 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI OMAP4 PandaBoard [ 0.000000] earlycon: omap8250 at MMIO 0x48020000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x98000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node dsp-memory@98000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x98800000, size 112 MiB [ 0.000000] OF: reserved mem: initialized node ipu-memory@98800000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 [ 0.000000] OMAP4: Map 0xafe00000 to (ptrval) for dram barrier [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x00000000afdfffff] [ 0.000000] HighMem [mem 0x00000000afe00000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000afdfffff] [ 0.000000] node 0: [mem 0x00000000b0000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] OMAP4430 ES2.1 [ 0.000000] percpu: Embedded 20 pages/cpu s49740 r8192 d23988 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 259908 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 868092K/1046528K available (9216K kernel code, 1024K rwdata, 2164K rodata, 1024K init, 281K bss, 39172K reserved, 139264K cma-reserved, 245760K highmem) <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <4>[ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 <4>[ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 <6>[ 0.000000] L2C-310 erratum 727915 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000 <6>[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz <6>[ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns <6>[ 0.010101] TI gptimer clockevent: always-on 32768 Hz at /ocp/interconnect@4a300000/segment@10000/target-module@8000 <6>[ 0.025360] Console: colour dummy device 80x30 <3>[ 0.030212] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' <3>[ 0.037231] This ensures that you still see kernel messages. Please <3>[ 0.043945] update your kernel commandline. <6>[ 0.048553] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) <6>[ 0.140716] pid_max: default: 32768 minimum: 301 <6>[ 0.145965] LSM: Security Framework initializing <6>[ 0.151092] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.158905] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.168273] CPU: Testing write buffer coherency: ok <6>[ 0.173614] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.179382] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.186370] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.193572] rcu: Hierarchical SRCU implementation. <6>[ 0.199493] smp: Bringing up secondary CPUs ... <6>[ 0.243896] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.243927] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.255676] smp: Brought up 1 node, 2 CPUs <6>[ 0.260162] SMP: Total of 2 processors activated (2393.70 BogoMIPS). <6>[ 0.266998] CPU: All CPU(s) started in SVC mode. <6>[ 0.272705] devtmpfs: initialized <6>[ 0.295776] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 <6>[ 0.304321] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.314758] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.334625] pinctrl core: initialized pinctrl subsystem <6>[ 0.342132] NET: Registered protocol family 16 <6>[ 0.350006] DMA: preallocated 256 KiB pool for atomic coherent allocations <4>[ 0.361297] omap_hwmod: l3_main_3 using broken dt data from ocp <4>[ 0.368530] omap_hwmod: l3_main_2 using broken dt data from ocp <6>[ 0.387847] audit: initializing netlink subsys (disabled) <5>[ 0.393981] audit: type=2000 audit(0.380:1): state=initialized audit_enabled=0 res=1 <6>[ 0.394653] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.402221] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.408782] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.415924] cpuidle: using governor menu <6>[ 1.258636] omap-gpmc 50000000.gpmc: GPMC revision 6.0 <4>[ 1.264190] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 <6>[ 1.661376] No ATAGs? <6>[ 1.664062] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 1.672607] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 1.699584] Kprobes globally optimized <6>[ 1.715576] iommu: Default domain type: Translated <6>[ 1.724853] vgaarb: loaded <5>[ 1.728424] SCSI subsystem initialized <6>[ 1.733489] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.738922] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.748626] PTP clock support registered <6>[ 1.754241] clocksource: Switched to clocksource 32k_counter <5>[ 2.680236] VFS: Disk quotas dquot_6.6.0 <6>[ 2.684692] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 2.703857] NET: Registered protocol family 2 <6>[ 2.709014] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 2.718872] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.727844] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 2.736236] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.743988] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 2.750976] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 2.758178] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 2.765991] NET: Registered protocol family 1 <6>[ 2.771575] RPC: Registered named UNIX socket transport module. <6>[ 2.778015] RPC: Registered udp transport module. <6>[ 2.783142] RPC: Registered tcp transport module. <6>[ 2.788269] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.795196] PCI: CLS 0 bytes, default 64 <6>[ 2.800170] Trying to unpack rootfs image as initramfs... <6>[ 4.205566] Freeing initrd memory: 13808K <4>[ 4.210784] hw perfevents: no irqs for PMU, sampling events not supported <6>[ 4.218200] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 4.228973] Initialise system trusted keyrings <6>[ 4.234191] workingset: timestamp_bits=14 max_order=18 bucket_order=4 <5>[ 4.242309] NFS: Registering the id_resolver key type <5>[ 4.247955] Key type id_resolver registered <5>[ 4.252532] Key type id_legacy registered <6>[ 4.257019] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 4.264984] Key type asymmetric registered <5>[ 4.269470] Asymmetric key parser 'x509' registered <6>[ 4.274871] bounce: pool size: 64 pages <6>[ 4.279113] io scheduler mq-deadline registered <6>[ 4.284057] io scheduler kyber registered <6>[ 4.405517] OMAP GPIO hardware version 0.1 <4>[ 4.420715] ti-sysc: probe of 4a318000.target-module failed with error -16 <6>[ 4.689910] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) <6>[ 4.945892] pinctrl-single 4a31e040.pinmux: 28 pins, size 56 <6>[ 4.953002] pinctrl-single 4a100040.pinmux: 203 pins, size 406 <6>[ 4.968749] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <6>[ 4.979766] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 114, base_baud = 3000000) is a 8250 <6>[ 4.989166] printk: console [ttyS2] enabled <6>[ 4.989166] printk: console [ttyS2] enabled <6>[ 4.998229] printk: bootconsole [omap8250] disabled <6>[ 4.998229] printk: bootconsole [omap8250] disabled <6>[ 5.010009] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 125, base_baud = 3000000) is a 8250 <6>[ 5.020324] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 126, base_baud = 3000000) is a 8250 <6>[ 5.030761] 4806e000.serial: ttyS3 at MMIO 0x4806e000 (irq = 127, base_baud = 3000000) is a 8250 <6>[ 5.052886] brd: module loaded <6>[ 5.065826] loop: module loaded <3>[ 5.072296] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 5.089996] i2c /dev entries driver <4>[ 5.095550] thermal thermal_zone0: failed to read out thermal zone (-5) <6>[ 5.104736] sdhci: Secure Digital Host Controller Interface driver <6>[ 5.111206] sdhci: Copyright(c) Pierre Ossman <6>[ 5.117218] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 5.126708] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 5.135772] Initializing XFRM netlink socket <6>[ 5.140502] NET: Registered protocol family 10 <6>[ 5.146453] Segment Routing with IPv6 <6>[ 5.150482] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 5.157470] NET: Registered protocol family 17 <6>[ 5.162231] NET: Registered protocol family 15 <5>[ 5.167114] Key type dns_resolver registered <6>[ 5.172180] oprofile: using arm/armv7-ca9 <6>[ 5.176635] ThumbEE CPU extension supported. <5>[ 5.181213] Registering SWP/SWPB emulation handler <3>[ 5.187316] twl: not initialized <3>[ 5.190826] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 <3>[ 5.199157] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 <3>[ 5.207519] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 <3>[ 5.215881] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 <3>[ 5.224243] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 <3>[ 5.232543] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 <3>[ 5.240875] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 <6>[ 5.249237] Power Management for TI OMAP4+ devices. <4>[ 5.254425] OMAP4 PM: u-boot >= v2012.07 is required for full PM support <6>[ 5.261932] SmartReflex Class3 initialized <5>[ 5.266662] Loading compiled-in X.509 certificates <6>[ 5.299407] smartreflex 4a0d9000.smartreflex: omap_sr_probe: SmartReflex driver initialized <6>[ 5.308563] smartreflex 4a0db000.smartreflex: omap_sr_probe: SmartReflex driver initialized <6>[ 5.317565] smartreflex 4a0dd000.smartreflex: omap_sr_probe: SmartReflex driver initialized <4>[ 5.394561] hw-breakpoint: Failed to enable monitor mode on CPU 0. <4>[ 5.414459] hw-breakpoint: CPU 0 failed to disable vector catch <6>[ 5.481872] omap-iommu 4a066000.mmu: 4a066000.mmu registered <6>[ 5.481903] platform 44000000.ocp:dsp: Adding to iommu group 0 <6>[ 5.497985] omap_i2c 48060000.i2c: bus 2 rev0.10 at 100 kHz <4>[ 5.506591] Skipping twl internal clock init and using bootloader value (unknown osc rate) <6>[ 5.546478] twl 0-0048: PIH (irq 155) nested IRQs <6>[ 5.582550] omap_i2c 48070000.i2c: bus 0 rev0.10 at 400 kHz <6>[ 5.590942] omap_i2c 48072000.i2c: bus 1 rev0.10 at 400 kHz <6>[ 5.598205] omap_i2c 48350000.i2c: bus 3 rev0.10 at 400 kHz <6>[ 5.605621] omap-iommu 55082000.mmu: 55082000.mmu registered <6>[ 5.611602] platform 55020000.ipu: Adding to iommu group 1 <4>[ 5.923217] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 5.933654] mmc0: new high speed SDHC card at address 59b4 <6>[ 5.939971] mmcblk0: mmc0:59b4 USD 3.75 GiB <6>[ 5.947448] mmcblk0: p1 <3>[ 18.249938] l4_secure_cm:clk:0038:0: failed to disable <6>[ 18.257690] Freeing unused kernel memory: 1024K <6>[ 18.262969] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 18.432006] udevd[123]: starting version 3.2.9 <5>[ 18.437896] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 18.445465] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 18.452362] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 18.470581] udevd[123]: specified user 'tss' unknown <27>[ 18.475952] udevd[123]: specified group 'tss' unknown <30>[ 18.484619] udevd[124]: starting eudev-3.2.9 <6>[ 18.772521] omap-rproc 44000000.ocp:dsp: assigned reserved memory node dsp-memory@98000000 <6>[ 18.781372] remoteproc remoteproc0: 44000000.ocp:dsp is available <6>[ 18.787963] omap-rproc 55020000.ipu: assigned reserved memory node ipu-memory@98800000 <6>[ 18.797027] remoteproc remoteproc1: 55020000.ipu is available <4>[ 18.814178] remoteproc remoteproc0: Direct firmware load for omap4-dsp-fw.xe64T failed with error -2 <6>[ 18.823791] remoteproc remoteproc0: powering up 44000000.ocp:dsp <4>[ 18.854187] remoteproc remoteproc0: Direct firmware load for omap4-dsp-fw.xe64T failed with error -2 <3>[ 18.854187] remoteproc remoteproc0: request_firmware failed: -2 <4>[ 18.998321] remoteproc remoteproc1: Direct firmware load for omap4-ipu-fw.xem3 failed with error -2 <6>[ 19.008697] remoteproc remoteproc1: powering up 55020000.ipu <4>[ 19.020202] remoteproc remoteproc1: Direct firmware load for omap4-ipu-fw.xem3 failed with error -2 <3>[ 19.029602] remoteproc remoteproc1: request_firmware failed: -2 <6>[ 19.236846] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec <6>[ 19.290740] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec <6>[ 19.764251] omap_rng 48090000.rng: Random Number Generator ver. 20 <5>[ 19.771759] random: crng init done <5>[ 19.775512] random: 1 urandom warning(s) missed due to ratelimiting <4>[ 19.952484] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. <6>[ 20.030731] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC <6>[ 20.125915] twl_rtc 48070000.i2c:twl@48:rtc: registered as rtc0 <6>[ 20.156341] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 <6>[ 20.162689] usbcore: registered new interface driver usbfs <6>[ 20.168823] usbcore: registered new interface driver hub <6>[ 20.174591] usbcore: registered new device driver usb <6>[ 20.225555] Driver for 1-wire Dallas network protocol. <6>[ 20.242248] omap-des 480a5000.des: will run requests pump with realtime priority <6>[ 20.254364] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) <6>[ 20.284820] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.6. Driver in Interrupt mode <6>[ 20.474700] twl6030_usb 48070000.i2c:twl@48:usb-comparator: Initialized TWL6030 USB module <6>[ 20.515197] w1_master_driver w1_bus_master1: Attaching one wire slave 01.000000000000 crc 3d <4>[ 20.648712] power_supply bq27000-battery: power_supply_get_battery_info currently only supports devicetree <6>[ 20.907379] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver <6>[ 20.913818] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 <6>[ 20.994018] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 21.002685] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 21.010284] usb usb1: Product: MUSB HDRC host driver <6>[ 21.015563] usb usb1: Manufacturer: Linux 5.10.131-cip13 musb-hcd <6>[ 21.015563] usb usb1: SerialNumber: musb-hdrc.1.auto <6>[ 21.038726] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 21.059387] ohci-platform: OHCI generic platform driver <6>[ 21.065887] ohci-platform 4a064800.ohci: Generic Platform OHCI controller <6>[ 21.118591] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <4>[ 21.125488] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after <6>[ 21.130615] hub 1-0:1.0: USB hub found <6>[ 21.138732] ehci-omap: OMAP-EHCI Host Controller driver <6>[ 21.149169] hub 1-0:1.0: 1 port detected <6>[ 21.157226] ohci-platform 4a064800.ohci: new USB bus registered, assigned bus number 2 <6>[ 21.173095] ohci-platform 4a064800.ohci: irq 106, io mem 0x4a064800 <6>[ 21.305328] omap-sham 4b100000.sham: hw accel on OMAP rev 4.3 <6>[ 21.317535] omap-mailbox 4a0f4000.mailbox: omap mailbox rev 0x400 <6>[ 21.384704] omap-sham 4b100000.sham: will run requests pump with realtime priority <6>[ 21.414337] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 <6>[ 21.422973] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 21.430541] usb usb2: Product: Generic Platform OHCI controller <6>[ 21.436828] usb usb2: Manufacturer: Linux 5.10.131-cip13 ohci_hcd <6>[ 21.442230] usb usb2: SerialNumber: 4a064800.ohci <3>[ 21.564300] omap4-keypad 4a31c000.keypad: number of keypad rows/columns not specified <4>[ 21.564300] omap4-keypad: probe of 4a31c000.keypad failed with error -22 <6>[ 21.644500] emif 4c000000.emif: emif_probe: device configured with addr = c6ec9aee and IRQ30 <6>[ 21.644714] hub 2-0:1.0: USB hub found <6>[ 21.669708] emif 4d000000.emif: emif_probe: device configured with addr = 32901010 and IRQ31 <6>[ 21.678466] omap-aes 4b501000.aes: OMAP AES hw accel rev: 3.2 <6>[ 21.767669] omap-aes 4b501000.aes: will run requests pump with realtime priority <6>[ 21.777252] hub 2-0:1.0: 3 ports detected <6>[ 21.809570] omap-aes 4b701000.aes: OMAP AES hw accel rev: 3.2 <6>[ 21.816833] omap-aes 4b701000.aes: will run requests pump with realtime priority <6>[ 21.980224] input: gpio_keys as /devices/platform/gpio_keys/input/input0 <4>[ 22.003662] usb_phy_generic hsusb1_phy: dummy supplies not allowed for exclusive requests <6>[ 22.034271] ehci-omap 4a064c00.ehci: EHCI Host Controller <6>[ 22.034271] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 3 <6>[ 22.105407] ehci-omap 4a064c00.ehci: irq 107, io mem 0x4a064c00 <4>[ 22.113525] omapdss_dss 58000000.dss: supply vdda_video not found, using dummy regulator <6>[ 22.135162] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00 <6>[ 22.155883] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 22.164550] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 22.172088] usb usb3: Product: EHCI Host Controller <6>[ 22.177307] usb usb3: Manufacturer: Linux 5.10.131-cip13 ehci_hcd <6>[ 22.183685] usb usb3: SerialNumber: 4a064c00.ehci <6>[ 22.192077] hub 3-0:1.0: USB hub found <6>[ 22.196838] hub 3-0:1.0: 3 ports detected <4>[ 22.205535] omapdss_dss 58000000.dss: supply vdda_video not found, using dummy regulator <6>[ 22.215209] DSS: OMAP DSS rev 4.0 <3>[ 22.226593] OF: graph: no port node found in /ocp/target-module@58000000/dss@0/target-module@5000/encoder@0 <3>[ 22.236724] OF: graph: no port node found in /ocp/target-module@58000000/dss@0/target-module@5000/encoder@0 <6>[ 22.253112] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dsi_vc_flush_receive_data [omapdss]) <6>[ 22.262817] omapdss_dss 58000000.dss: bound 58005000.encoder (ops dsi_vc_flush_receive_data [omapdss]) <6>[ 22.274505] omapdss_dss 58000000.dss: bound 58006000.encoder (ops dsi_vc_flush_receive_data [omapdss]) <6>[ 22.443542] dmm 4e000000.dmm: initialized all PAT entries <6>[ 22.484954] usb 3-1: new high-speed USB device number 2 using ehci-omap <6>[ 22.515136] omapdrm omapdrm.0: [drm] Cannot find any crtc or sizes <6>[ 22.522796] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0 <6>[ 22.687103] usb 3-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 <6>[ 22.695770] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 <6>[ 22.704803] hub 3-1:1.0: USB hub found <6>[ 22.710693] hub 3-1:1.0: 5 ports detected done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # #<6>[ 23.034912] usb 3-1.1: new high-speed USB device number 3 using ehci-omap / # export SHELL=/bin/sh export SHELL=/bin/sh / # <6>[ 23.185607] usb 3-1.1: New USB device found, idVendo. /lava-2309612/environment r=0424, idProduct=ec00, bcdDevice= 2.00 <6>[ 23.194702] usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 <6>[ 23.216064] smsc95xx v2.0.0 . /lava-2309612/environment / # /lava-2309612/bin/lava-test-runner /lava-2309612/0 /lava-2309612/bin/lava-test-runner /lava-2309612/0<6>[ 23.409637] SMSC LAN8700 usb-003:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-003:003:01, irq=POLL) <6>[ 23.422821] smsc95xx 3-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 02:03:01:8c:13:b0 <6>[ 23.435272] usbcore: registered new interface driver smsc95xx + export 'TESTRUN_ID=0_dmesg' + cd /lava-2309612/0/tests/0_dmesg<8>[ 23.479614] + cat uuid + UUID=2309612_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <6>[ 23.525787] omapdrm omapdrm.0: [drm] Cannot find any crtc or sizes <8>[ 23.532348] <8>[ 23.568969] <8>[ 23.608856] + set +x <8>[ 23.618957] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-2309612/environment / # . /lava-2309612/environment/lava-2309612/bin/lava-test-runner /lava-2309612/1 / # /lava-2309612/bin/lava-test-runner /lava-2309612/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-2309612/1/tests/1_bootr<8>[ 24.137237] r + cat uuid + UUID=2309612_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/helpers:/lava-2309612/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-2309612/1/../bin/lava-test-case <8>[ 25.194854] /lava-2309612/1/../bin/lava-test-case <8>[ 25.232421] /lava-2309612/1/../bin/lava-test-case <8>[ 25.256835] + set +x <8>[ 25.277618] / #