connecting to NetworkSerialPort(target=Target(name='imx6ul-pico-hobbit-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4007, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4007 connected to 10.8.254.5 (port 4007) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2017.10.1-00009-gbc5d99d030 #1 Wed Nov 1 17:19:43 CET 2017 Board: Technexion Pico i.MX6UL Board detected i.MX6 UltraLite revision 1.0 mdio_bus: miibus0: probed imx-usb 2184200.usb: USB EHCI 1.00 imx-esdhc 2190000.usdhc: registered as 2190000.usdhc imx-esdhc 2194000.usdhc: registered as 2194000.usdhc netconsole: registered as netconsole-1 malloc space: 0x8fefca40 -> 0x9fdf947f (size 255 MiB) mmc0: detected MMC card version 5.1 mmc0: registered mmc0.boot0 mmc0: registered mmc0.boot1 mmc0: registered mmc0 running /env/bin/init... [?25h Hit m for menu or any other key to stop autoboot: 3 type exit to get to the menu [1;32mbarebox@[1;36mTechnexion Pico i.MX6UL Board:/[0m bootm -v -r /mnt/tftp/820483/tftp-deploy-6ikx0gyq/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/820483/tftp-deploy-6ikx0gyq/dtb/imx6ul-pico-hobbit.dtb /mnt/tftp/820483/tftp-deploy-6ikx0gyq/kernel/zImage [1;32mbarebox@[1;36mTechnexion Pico i.MX6UL Board:/[0m bootm -v -r /mnt/tftp/820483/tftp-deploy-6ikx0gyq/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/820483/tftp-deploy-6ikx0gyq/dtb/imx6ul-pico-hobbit.dtb /mnt/tftp/820483/tftp-deploy-6ikx0gyq/kernel/zImage warning: No MAC address set. Using random address 12:23:3a:8f:a9:58 eth1: 100Mbps full duplex link detected T DHCP client bound to address 10.8.254.83 Loading ARM Linux zImage '/mnt/tftp/820483/tftp-deploy-6ikx0gyq/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x82e19000 no initrd load address, defaulting to 0x83852000 Loaded initrd GZIP compressed '/mnt/tftp/820483/tftp-deploy-6ikx0gyq/ramdisk/ramdisk.cpio.gz' initrd is at 0x83852000-0x847a1658 Loading devicetree from '/mnt/tftp/820483/tftp-deploy-6ikx0gyq/dtb/imx6ul-pico-hobbit.dtb' mmc0: Cannot find nodepath /soc/aips-bus@02100000/usdhc@02190000, cannot fixup Failed to fixup node in of_partition_fixup+0x1/0x1f8: Invalid argument commandline: console=ttymxc5,115200n8 Starting kernel at 0x82e19000, initrd at 0x83852000, oftree at 0x847a2000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.147-cip18 (KernelCI@build-j473716-arm-gcc-10-multi-v7-defconfig-mqg2x) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Nov 8 19:33:57 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TechNexion PICO-IMX6UL and HOBBIT baseboard [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttymxc5,115200n8 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 413152K/524288K available (13312K kernel code, 2230K rwdata, 5344K rodata, 2048K init, 424K bss, 45600K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000019] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000065] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.007466] Console: colour dummy device 80x30 [ 0.007575] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.007625] pid_max: default: 32768 minimum: 301 [ 0.007988] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.008031] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.009532] CPU: Testing write buffer coherency: ok [ 0.010286] CPU0: update cpu_capacity 1024 [ 0.010327] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.012041] Setting up static identity map for 0x80300000 - 0x803000ac [ 0.014638] rcu: Hierarchical SRCU implementation. [ 0.020594] EFI services will not be available. [ 0.021051] smp: Bringing up secondary CPUs ... [ 0.021089] smp: Brought up 1 node, 1 CPU [ 0.021117] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.021138] CPU: All CPU(s) started in SVC mode. [ 0.022199] devtmpfs: initialized [ 0.035398] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.035943] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.036004] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.040586] pinctrl core: initialized pinctrl subsystem [ 0.044371] DMI not present or invalid. [ 0.046489] NET: Registered protocol family 16 [ 0.051271] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.056590] thermal_sys: Registered thermal governor 'step_wise' [ 0.056791] cpuidle: using governor menu [ 0.263803] vdd3p0: supplied by regulator-dummy [ 0.275940] cpu: supplied by regulator-dummy [ 0.288512] vddsoc: supplied by regulator-dummy [ 0.674964] No ATAGs? [ 0.676139] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.676179] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.684722] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.695084] Serial: AMBA PL011 UART driver [ 0.757761] mxs-dma 1804000.dma-apbh: initialized [ 0.771707] iommu: Default domain type: Translated [ 0.772643] vgaarb: loaded [ 0.774789] SCSI subsystem initialized [ 0.776090] usbcore: registered new interface driver usbfs [ 0.776232] usbcore: registered new interface driver hub [ 0.776354] usbcore: registered new device driver usb [ 0.779854] i2c i2c-0: IMX I2C adapter registered [ 0.782197] i2c i2c-1: IMX I2C adapter registered [ 0.783251] imx-i2c 21a8000.i2c: can't get pinctrl, bus recovery not supported [ 0.785070] i2c i2c-2: IMX I2C adapter registered [ 0.788344] pps_core: LinuxPPS API ver. 1 registered [ 0.788384] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.788447] PTP clock support registered [ 0.798097] clocksource: Switched to clocksource mxc_timer1 [ 3.019384] NET: Registered protocol family 2 [ 3.019972] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 3.021858] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 3.021960] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 3.022077] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.022240] TCP: Hash tables configured (established 4096 bind 4096) [ 3.022462] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.022538] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.022931] NET: Registered protocol family 1 [ 3.024670] RPC: Registered named UNIX socket transport module. [ 3.024713] RPC: Registered udp transport module. [ 3.024735] RPC: Registered tcp transport module. [ 3.024757] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.024787] PCI: CLS 0 bytes, default 64 [ 3.025731] Trying to unpack rootfs image as initramfs... [ 6.040301] Freeing initrd memory: 15680K [ 6.041441] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 6.045005] Initialise system trusted keyrings [ 6.045839] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 6.061577] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 6.063785] NFS: Registering the id_resolver key type [ 6.063969] Key type id_resolver registered [ 6.063994] Key type id_legacy registered [ 6.064271] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 6.064298] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 6.064389] ntfs: driver 2.1.32 [Flags: R/O]. [ 6.065570] Key type asymmetric registered [ 6.065608] Asymmetric key parser 'x509' registered [ 6.065741] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 6.065768] io scheduler mq-deadline registered [ 6.065790] io scheduler kyber registered [ 6.117585] pwm-backlight backlight: supply power not found, using dummy regulator [ 6.170839] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 6.170897] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 6.293708] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 6.304034] SuperH (H)SCI(F) driver initialized [ 6.306528] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 69, base_baud = 5000000) is a IMX [ 6.308846] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 70, base_baud = 5000000) is a IMX [ 7.021823] printk: console [ttymxc5] enabled [ 7.029440] msm_serial: driver initialized [ 7.034144] STMicroelectronics ASC driver initialized [ 7.043339] STM32 USART driver initialized [ 7.070232] panel-simple panel: supply power not found, using dummy regulator [ 7.077822] panel-simple panel: Specify missing connector_type [ 7.109227] brd: module loaded [ 7.130084] loop: module loaded [ 7.168807] CAN device driver interface [ 7.175453] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 7.186457] pps pps0: new PPS source ptp0 [ 7.266459] fec 20b4000.ethernet eth0: registered PHC device 0 [ 7.275864] e1000e: Intel(R) PRO/1000 Network Driver [ 7.280996] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 7.287102] igb: Intel(R) Gigabit Ethernet Network Driver [ 7.292585] igb: Copyright (c) 2007-2014 Intel Corporation. [ 7.311388] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 7.319085] usbcore: registered new interface driver pegasus [ 7.324883] usbcore: registered new interface driver asix [ 7.330487] usbcore: registered new interface driver ax88179_178a [ 7.336684] usbcore: registered new interface driver cdc_ether [ 7.342731] usbcore: registered new interface driver smsc75xx [ 7.348666] usbcore: registered new interface driver smsc95xx [ 7.354515] usbcore: registered new interface driver net1080 [ 7.360331] usbcore: registered new interface driver cdc_subset [ 7.366348] usbcore: registered new interface driver zaurus [ 7.372191] usbcore: registered new interface driver cdc_ncm [ 7.385750] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.392437] ehci-pci: EHCI PCI platform driver [ 7.397023] ehci-platform: EHCI generic platform driver [ 7.403057] ehci-orion: EHCI orion driver [ 7.407585] SPEAr-ehci: EHCI SPEAr driver [ 7.412160] ehci-st: EHCI STMicroelectronics driver [ 7.417484] ehci-exynos: EHCI Exynos driver [ 7.422242] ehci-atmel: EHCI Atmel driver [ 7.426697] tegra-ehci: Tegra EHCI driver [ 7.431357] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.437643] ohci-pci: OHCI PCI platform driver [ 7.442351] ohci-platform: OHCI generic platform driver [ 7.448354] SPEAr-ohci: OHCI SPEAr driver [ 7.452848] ohci-st: OHCI STMicroelectronics driver [ 7.458286] ohci-atmel: OHCI Atmel driver [ 7.464787] usbcore: registered new interface driver usb-storage [ 7.489620] i2c /dev entries driver [ 7.540406] sdhci: Secure Digital Host Controller Interface driver [ 7.546624] sdhci: Copyright(c) Pierre Ossman [ 7.557274] Synopsys Designware Multimedia Card Interface Driver [ 7.568002] sdhci-pltfm: SDHCI platform and OF driver helper [ 7.593256] ledtrig-cpu: registered to indicate activity on CPUs [ 7.602009] usbcore: registered new interface driver usbhid [ 7.607615] usbhid: USB HID core driver [ 7.627337] NET: Registered protocol family 10 [ 7.634533] Segment Routing with IPv6 [ 7.638535] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 7.646043] NET: Registered protocol family 17 [ 7.650660] can: controller area network core [ 7.655194] NET: Registered protocol family 29 [ 7.659743] can: raw protocol [ 7.662742] can: broadcast manager protocol [ 7.666960] can: netlink gateway - max_hops=1 [ 7.672416] Key type dns_resolver registered [ 7.680876] ThumbEE CPU extension supported. [ 7.685226] Registering SWP/SWPB emulation handler [ 7.691354] Loading compiled-in X.509 certificates [ 7.731291] pwm-backlight backlight: supply power not found, using dummy regulator [ 7.743820] panel-simple panel: supply power not found, using dummy regulator [ 7.751552] panel-simple panel: Specify missing connector_type [ 7.757499] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 7.785763] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 7.790840] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 7.829838] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 7.839849] hub 1-0:1.0: USB hub found [ 7.844107] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 7.854557] hub 1-0:1.0: 1 port detected [ 7.865774] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 7.880386] pwm-backlight backlight: supply power not found, using dummy regulator [ 7.893245] panel-simple panel: supply power not found, using dummy regulator [ 7.900965] panel-simple panel: Specify missing connector_type [ 7.910464] pwm-backlight backlight: supply power not found, using dummy regulator [ 7.923232] panel-simple panel: supply power not found, using dummy regulator [ 7.930912] panel-simple panel: Specify missing connector_type [ 7.947014] Freeing unused kernel memory: 2048K [ 7.954688] Run /init as init process [ 7.959960] mmc0: new DDR MMC card at address 0001 [ 7.970386] mmcblk0: mmc0:0001 M62704 3.56 GiB [ 7.977581] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 7.985416] mmcblk0boot0: mmc0:0001 M62704 partition 1 2.00 MiB [ 7.999021] mmcblk0boot1: mmc0:0001 M62704 partition 2 2.00 MiB [ 8.005251] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 8.020166] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 8.026122] mmcblk0rpmb: mmc0:0001 M62704 partition 3 512 KiB, chardev (235:0) [ 8.041379] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 8.056576] mmcblk0: p1 p2 [ 8.074248] pwm-backlight backlight: supply power not found, using dummy regulator [ 8.097942] panel-simple panel: supply power not found, using dummy regulator [ 8.105679] panel-simple panel: Specify missing connector_type Starting syslogd: OK [ 8.226409] mmc1: new high speed SDIO card at address 0001 Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 8.392869] udevd[91]: starting version 3.2.9 [ 8.400301] random: udevd: uninitialized urandom read (16 bytes read) [ 8.407387] random: udevd: uninitialized urandom read (16 bytes read) [ 8.415013] random: udevd: uninitialized urandom read (16 bytes read) [ 8.439764] udevd[91]: specified user 'tss' unknown [ 8.445039] udevd[91]: specified group 'tss' unknown [ 8.457212] udevd[92]: starting eudev-3.2.9 [ 11.763503] pwm-backlight backlight: supply power not found, using dummy regulator [ 11.847900] panel-simple panel: supply power not found, using dummy regulator [ 11.855650] panel-simple panel: Specify missing connector_type [ 12.752268] pwm-backlight backlight: supply power not found, using dummy regulator [ 12.832688] panel-simple panel: supply power not found, using dummy regulator [ 12.840404] panel-simple panel: Specify missing connector_type [ 13.431413] caam 2140000.crypto: Entropy delay = 3200 [ 13.497297] caam 2140000.crypto: Instantiated RNG4 SH0 [ 13.558050] caam 2140000.crypto: Instantiated RNG4 SH1 [ 13.563219] caam 2140000.crypto: device ID = 0x0a16030000000000 (Era 8) [ 13.569882] caam 2140000.crypto: job rings = 3, qi = 0 [ 13.589304] pwm-backlight backlight: supply power not found, using dummy regulator [ 13.601796] panel-simple panel: supply power not found, using dummy regulator [ 13.609463] panel-simple panel: Specify missing connector_type [ 14.665828] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 14.719501] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 14.755878] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 14.860135] pwm-backlight backlight: supply power not found, using dummy regulator [ 14.914415] panel-simple panel: supply power not found, using dummy regulator [ 14.922198] panel-simple panel: Specify missing connector_type [ 15.752201] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 15.759254] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 15.767895] cfg80211: failed to load regulatory.db [ 15.869927] pwm-backlight backlight: supply power not found, using dummy regulator [ 15.882509] panel-simple panel: supply power not found, using dummy regulator [ 15.890239] panel-simple panel: Specify missing connector_type [ 15.931127] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430a0-sdio for chip BCM43430/0 [ 15.994890] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430a0-sdio.bin failed with error -2 [ 16.021274] pwm-backlight backlight: supply power not found, using dummy regulator [ 16.060922] panel-simple panel: supply power not found, using dummy regulator [ 16.068608] panel-simple panel: Specify missing connector_type [ 17.058484] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 17.385006] caam algorithms registered in /proc/crypto [ 17.394666] caam 2140000.crypto: caam pkc algorithms registered in /proc/crypto [ 17.402234] caam 2140000.crypto: registering rng-caam [ 17.440620] pwm-backlight backlight: supply power not found, using dummy regulator [ 17.465320] panel-simple panel: supply power not found, using dummy regulator [ 17.473076] panel-simple panel: Specify missing connector_type done Saving random seed: [ 17.564280] random: dd: uninitialized urandom read (32 bytes read) OK [ 17.589888] random: crng init done Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-820483/environment . /lava-820483/environment / # /lava-820483/bin/lava-test-runner /lava-820483/0 /lava-820483/bin/lava-test-runner /lava-820483/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-820483/0/tests/0_dmesg + cat uuid + UUID=820483_1.5.2.3.1[ 18.401311] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 18.481693] [ 18.554337] [ 18.627209] + set +x [ 18.638989] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-820483/environment / # . /lava-820483/environment/lava-820483/bin/lava-test-runner /lava-820483/1 / # /lava-820483/bin/lava-test-runner /lava-820483/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-820483/1/tests/1_bootrr + cat uuid + UUID=820483_1.5.2.3.5[ 19.180149] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-820483/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-820483/1/../bin/lava-test-case [ 20.270634] /lava-820483/1/../bin/lava-test-case [ 20.337370] /lava-820483/1/../bin/lava-test-case [ 20.376974] + set +x [ 20.406048] / #