Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2002 device serialdev,/dev/ttyUSB-lf-bbb-02,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.188 (101 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 834205/tftp-deploy-v7d0_92f/kernel/zImage tftp 0x82000000 834205/tftp-deploy-v7d0_92f/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.188 Filename '834205/tftp-deploy-v7d0_92f/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 4.4 MiB 3.3 MiB/s done Bytes transferred = 4601032 (4634c8 hex) => tftp 0x83000000 834205/tftp-deploy-v7d0_92f/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 834205/tftp-deploy-v7d0_92f/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.188 Filename '834205/tftp-deploy-v7d0_92f/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 9.8 MiB 3.3 MiB/s done Bytes transferred = 10232309 (9c21f5 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 834205/tftp-deploy-v7d0_92f/dtb/am335x-boneblack.dtb tftp 0x88000000 834205/tftp-deploy-v7d0_92f/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.188 Filename '834205/tftp-deploy-v7d0_92f/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 61.4 KiB 3 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=172.16.3.3:/var/lib/lava/dispatcher/tmp/834205/extract-nfsrootfs-rt2yr4vq,tcp,hard,v3 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=172.16.3.3:/var/lib/lava/dispatcher/tmp/834205/extract-nfsrootfs-rt2yr4vq,tcp,hard,v3 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x4634c8 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-01-27 1:08:43 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 10232245 Bytes = 9.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801256b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.162-cip24-rt10 (KernelCI@build-j927008-arm-gcc-10-omap2plus-defconfig-6bzqk) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Fri Jan 27 00:00:46 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] On node 0 totalpages: 130560 [ 0.000000] Normal zone: 1148 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 16 pages/cpu s33484 r8192 d23860 u65536 [ 0.000000] pcpu-alloc: s33484 r8192 d23860 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=172.16.3.3:/var/lib/lava/dispatcher/tmp/834205/extract-nfsrootfs-rt2yr4vq,tcp,hard,v3 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 475880K/522240K available (9216K kernel code, 1041K rwdata, 2168K rodata, 1024K init, 270K bss, 29976K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008337] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018551] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030272] Console: colour dummy device 80x30 <3>[ 0.035149] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042208] This ensures that you still see kernel messages. Please <3>[ 0.048933] update your kernel commandline. <6>[ 0.053538] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095553] pid_max: default: 32768 minimum: 301 <6>[ 0.100721] LSM: Security Framework initializing <6>[ 0.105829] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.113651] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.122929] CPU: Testing write buffer coherency: ok <6>[ 0.128294] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.134206] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.140673] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.147873] rcu: Hierarchical SRCU implementation. <6>[ 0.153686] smp: Bringing up secondary CPUs ... <6>[ 0.158622] smp: Brought up 1 node, 1 CPU <6>[ 0.163068] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.169812] CPU: All CPU(s) started in SVC mode. <6>[ 0.175557] devtmpfs: initialized <6>[ 0.191092] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.199618] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.210058] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.218580] pinctrl core: initialized pinctrl subsystem <6>[ 0.226194] NET: Registered protocol family 16 <6>[ 0.233817] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.260255] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.266333] audit: initializing netlink subsys (disabled) <6>[ 0.273354] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.273367] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.273372] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.273631] cpuidle: using governor menu <5>[ 1.157978] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1 <6>[ 1.282284] No ATAGs? <6>[ 1.284914] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.309295] Kprobes globally optimized <7>[ 1.319662] reg-fixed-voltage fixedregulator0: GPIO lookup for consumer (null) <7>[ 1.327394] reg-fixed-voltage fixedregulator0: using device tree for GPIO lookup <7>[ 1.335340] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator0[0]' <7>[ 1.344695] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator0[0]' <7>[ 1.353941] reg-fixed-voltage fixedregulator0: using lookup tables for GPIO lookup <7>[ 1.362013] reg-fixed-voltage fixedregulator0: No GPIO consumer (null) found <6>[ 1.372328] iommu: Default domain type: Translated <6>[ 1.379481] vgaarb: loaded <5>[ 1.383037] SCSI subsystem initialized <7>[ 1.387554] libata version 3.00 loaded. <6>[ 1.392425] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.397810] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.407549] PTP clock support registered <6>[ 1.413323] clocksource: Switched to clocksource dmtimer <5>[ 2.016065] VFS: Disk quotas dquot_6.6.0 <6>[ 2.020478] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 2.037475] NET: Registered protocol family 2 <6>[ 2.042544] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.051272] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.060244] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.068543] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.076225] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.083162] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.090166] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.097788] NET: Registered protocol family 1 <6>[ 2.103673] RPC: Registered named UNIX socket transport module. <6>[ 2.110050] RPC: Registered udp transport module. <6>[ 2.115224] RPC: Registered tcp transport module. <6>[ 2.120330] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.127256] PCI: CLS 0 bytes, default 64 <6>[ 2.132285] Trying to unpack rootfs image as initramfs... <6>[ 2.809518] Freeing initrd memory: 9996K <6>[ 2.815200] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 2.825595] Initialise system trusted keyrings <6>[ 2.830878] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 2.839117] NFS: Registering the id_resolver key type <5>[ 2.844733] Key type id_resolver registered <5>[ 2.849307] Key type id_legacy registered <6>[ 2.853768] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 2.861718] Key type asymmetric registered <5>[ 2.866260] Asymmetric key parser 'x509' registered <6>[ 2.871561] io scheduler mq-deadline registered <6>[ 2.876508] io scheduler kyber registered <3>[ 3.013863] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.022497] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.130777] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 3.172696] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 3.244227] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.252860] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 3.312432] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.321157] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 3.338578] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.347265] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 3.410497] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.419069] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 3.446467] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <7>[ 3.455358] gpio-clk clk_mcasp0: GPIO lookup for consumer enable <7>[ 3.461835] gpio-clk clk_mcasp0: using device tree for GPIO lookup <7>[ 3.468575] gpio-clk clk_mcasp0: No GPIO consumer enable found <6>[ 3.480491] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <7>[ 3.491315] omap8250 44e09000.serial: GPIO lookup for consumer rs485-term <7>[ 3.498729] omap8250 44e09000.serial: using device tree for GPIO lookup <7>[ 3.505850] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' <7>[ 3.520937] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' <7>[ 3.535923] omap8250 44e09000.serial: using lookup tables for GPIO lookup <7>[ 3.543195] omap8250 44e09000.serial: No GPIO consumer rs485-term found <6>[ 3.550308] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 3.559731] printk: console [ttyS0] enabled <6>[ 3.559731] printk: console [ttyS0] enabled <6>[ 3.568795] printk: bootconsole [omap8250] disabled <6>[ 3.568795] printk: bootconsole [omap8250] disabled <6>[ 3.592565] brd: module loaded <6>[ 3.604945] loop: module loaded <3>[ 3.610388] mtdoops: mtd device (mtddev=name/number) must be supplied <7>[ 3.619540] mdio_bus fixed-0: GPIO lookup for consumer reset <7>[ 3.625588] mdio_bus fixed-0: using lookup tables for GPIO lookup <7>[ 3.631976] mdio_bus fixed-0: No GPIO consumer reset found <7>[ 3.642220] mdio_bus 4a101000.mdio: GPIO lookup for consumer reset <7>[ 3.648859] mdio_bus 4a101000.mdio: using device tree for GPIO lookup <7>[ 3.655637] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' <7>[ 3.670712] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' <7>[ 3.685692] mdio_bus 4a101000.mdio: using lookup tables for GPIO lookup <7>[ 3.692600] mdio_bus 4a101000.mdio: No GPIO consumer reset found <6>[ 3.753067] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <7>[ 3.777036] mdio_bus 4a101000.mdio:00: GPIO lookup for consumer reset <7>[ 3.783949] mdio_bus 4a101000.mdio:00: using device tree for GPIO lookup <7>[ 3.790967] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0[0]' <7>[ 3.807395] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0[0]' <7>[ 3.823692] mdio_bus 4a101000.mdio:00: using lookup tables for GPIO lookup <7>[ 3.830863] mdio_bus 4a101000.mdio:00: No GPIO consumer reset found <6>[ 3.838697] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 3.848610] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 3.855330] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 3.861098] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) <6>[ 3.868708] cpsw 4a100000.ethernet: Detected MACID = 04:79:b7:e7:06:e0 <6>[ 3.877737] i2c /dev entries driver <5>[ 3.883392] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 3.891222] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.897774] sdhci: Copyright(c) Pierre Ossman <6>[ 3.903199] sdhci-pltfm: SDHCI platform and OF driver helper <7>[ 3.910214] sdhci-omap 48060000.mmc: GPIO lookup for consumer cd <7>[ 3.916635] sdhci-omap 48060000.mmc: using device tree for GPIO lookup <7>[ 3.923516] sdhci-omap 48060000.mmc: No GPIO consumer cd found <7>[ 3.930528] sdhci-omap 481d8000.mmc: GPIO lookup for consumer wp <7>[ 3.936936] sdhci-omap 481d8000.mmc: using device tree for GPIO lookup <7>[ 3.943793] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' <7>[ 3.957656] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' <7>[ 3.971435] sdhci-omap 481d8000.mmc: using lookup tables for GPIO lookup <7>[ 3.978452] sdhci-omap 481d8000.mmc: No GPIO consumer wp found <4>[ 3.984758] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.993299] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.001578] Initializing XFRM netlink socket <6>[ 4.006427] NET: Registered protocol family 10 <6>[ 4.014314] Segment Routing with IPv6 <6>[ 4.018363] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.025428] NET: Registered protocol family 17 <6>[ 4.030195] NET: Registered protocol family 15 <5>[ 4.035124] Key type dns_resolver registered <6>[ 4.040272] oprofile: using arm/armv7 <6>[ 4.044385] ThumbEE CPU extension supported. <5>[ 4.048970] Registering SWP/SWPB emulation handler <3>[ 4.054484] omap_voltage_late_init: Voltage driver support not added <3>[ 4.061150] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize <3>[ 4.069587] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize <6>[ 4.078262] SmartReflex Class3 initialized <6>[ 4.083651] printk: console [ttyS0]: printing thread started <5>[ 4.083729] Loading compiled-in X.509 certificates <6>[ 4.101716] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <6>[ 4.103718] OMAP GPIO hardware version 0.1 <4>[ 4.153754] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.161089] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.175694] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.176485] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.180438] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 4.185711] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.185722] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.185984] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.233784] mmc1: new high speed MMC card at address 0001 <6>[ 4.234852] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 4.235278] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 4.235673] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 4.236015] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (249:0) <6>[ 4.238086] mmcblk1: p1 <6>[ 4.277079] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.278617] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 4.354618] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 6.453758] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 6.483077] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 6.513182] Sending DHCP requests ., OK <6>[ 6.653051] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.188 <6>[ 6.653073] IP-Config: Complete: <6>[ 6.653076] device=eth0, hwaddr=04:79:b7:e7:06:e0, ipaddr=172.16.3.188, mask=255.255.255.0, gw=172.16.3.3 <6>[ 6.653091] host=172.16.3.188, domain=denx.de, nis-domain=(none) <6>[ 6.653096] bootserver=172.16.3.33, rootserver=172.16.3.3, rootpath= <6>[ 6.653103] nameserver0=172.16.3.3 <6>[ 6.653113] ntpserver0=172.16.3.3 <6>[ 6.655877] Freeing unused kernel memory: 1024K Loading, please wait... <6>[ 6.723600] Run /init as init process Starting version 247.3-7+deb11u1 <4>[ 7.898530] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <4>[ 7.929344] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 7.985261] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <4>[ 7.985729] at24 2-0054: supply vcc not found, using dummy regulator <6>[ 7.986819] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <4>[ 8.017428] at24 2-0055: supply vcc not found, using dummy regulator <3>[ 8.042852] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <4>[ 8.046080] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 8.110035] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 8.174026] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <4>[ 8.184160] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 8.184483] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 8.203781] remoteproc remoteproc0: wkup_m3 is available <6>[ 8.270802] usbcore: registered new interface driver usbfs <6>[ 8.270875] usbcore: registered new interface driver hub <6>[ 8.270961] usbcore: registered new device driver usb <6>[ 8.273850] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 8.273941] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) <6>[ 8.515556] tda998x 0-0070: found TDA19988 <6>[ 8.549669] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <3>[ 8.762049] davinci-mcasp 48038000.mcasp: IRQ common not found <6>[ 8.905653] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 8.906683] random: crng init done <6>[ 8.983728] remoteproc remoteproc0: powering up wkup_m3 <4>[ 8.983926] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 8.983947] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 8.983956] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <4>[ 9.020566] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 9.020883] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 9.042671] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 9.042720] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 9.053120] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_driver_exit [tda998x]) <6>[ 9.061721] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 <6>[ 9.062532] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 9.065117] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 9.088649] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 9.088677] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 9.088687] usb usb1: Product: MUSB HDRC host driver <6>[ 9.088694] usb usb1: Manufacturer: Linux 5.10.162-cip24-rt10 musb-hcd <6>[ 9.088700] usb usb1: SerialNumber: musb-hdrc.1 <6>[ 9.091198] hub 1-0:1.0: USB hub found <6>[ 9.092282] hub 1-0:1.0: 1 port detected <3>[ 9.452197] PM: Cannot get wkup_m3_ipc handle <6>[ 9.501456] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <6>[ 9.542494] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <6>[ 9.561153] omap-aes 53500000.aes: will run requests pump with realtime priority <6>[ 9.564994] omap-sham 53100000.sham: will run requests pump with realtime priority <3>[ 9.598098] PM: Cannot get wkup_m3_ipc handle <3>[ 9.608656] PM: Cannot get wkup_m3_ipc handle <3>[ 10.147580] PM: Cannot get wkup_m3_ipc handle <3>[ 10.170620] PM: Cannot get wkup_m3_ipc handle Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... Waiting up to 60 secs for any ethernet to become available Device /sys/class/net/eth0 found done. IP-Config: eth0 hardware address 04:79:b7:e7:06:e0 mtu 1500 DHCP IP-Config: eth0 complete (dhcp from 172.16.3.3): address: 172.16.3.188 broadcast: 172.16.3.255 netmask: 255.255.255.0 gateway: 172.16.3.3 dns0 : 172.16.3.3 dns1 : 0.0.0.0 domain : denx.de rootserver: 172.16.3.33 rootpath: filename : this-host-is-not-configured.kpxe done. Begin: Running /scripts/nfs-bottom ... done. Begin: Running /scripts/init-bottom ... done. <30>[ 11.834741] systemd[1]: System time before build time, advancing clock. <30>[ 11.928615] systemd[1]: Inserted module 'autofs4' <30>[ 11.970929] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) <30>[ 11.971770] systemd[1]: Detected architecture arm. Welcome to [1mDebian GNU/Linux 11 (bullseye)[0m! <30>[ 12.046656] systemd[1]: Set hostname to . [[0;32m OK [0m] Created slice [0;1;39msystem-getty.slice[0<30>[ 13.872995] systemd[1]: Queued start job for default target Graphical Interface. m. <28>[ 13.876105] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <28>[ 13.876150] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <30>[ 13.880171] systemd[1]: Created slice system-getty.slice. [[0;32m OK [0m] Created slice [0;1;39msystem-modprobe.slice[0m. <30>[ 13.925337] systemd[1]: Created slice system-modprobe.slice. [[0;32m OK [0m] Created slice [0;1;39msystem-serial\x2dgetty.slice[0m. <30>[ 13.956809] systemd[1]: Created slice system-serial\x2dgetty.slice. [[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m. <30>[ 13.986174] systemd[1]: Created slice User and Session Slice. [[0;32m OK [0m] Started [0;1;39mDispatch Password …ts to Console Directory Watch[0m. <30>[ 14.015358] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [[0;32m OK [0m] Started [0;1;39mForward Password R…uests to Wall Directory Watch[0m. <30>[ 14.044291] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [[0;32m OK [0m] Set up automount [0;1;39mArbitrary…s File System Automount Point[0m. <30>[ 14.075455] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [[0;32m OK [0m] Reached target [0;1;39mLocal Encrypted Volumes[0m. <30>[ 14.104000] systemd[1]: Reached target Local Encrypted Volumes. [[0;32m OK [0m] Reached target [0;1;39mPaths[0m. <30>[ 14.134099] systemd[1]: Reached target Paths. [[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m. <30>[ 14.163675] systemd[1]: Reached target Remote File Systems. [[0;32m OK [0m] Reached target [0;1;39mSlices[0m. <30>[ 14.193881] systemd[1]: Reached target Slices. [[0;32m OK [0m] Reached target [0;1;39mSwap[0m. <30>[ 14.223836] systemd[1]: Reached target Swap. [[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m. <30>[ 14.254692] systemd[1]: Listening on initctl Compatibility Named Pipe. [[0;32m OK [0m] Listening on [0;1;39mJournal Audit Socket[<30>[ 14.289169] systemd[1]: Listening on Journal Audit Socket. 0m. [[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m. <30>[ 14.326171] systemd[1]: Listening on Journal Socket (/dev/log). [[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m. <30>[ 14.355417] systemd[1]: Listening on Journal Socket. [[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m. <30>[ 14.386778] systemd[1]: Listening on Network Service Netlink Socket. [[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0<30>[ 14.419872] systemd[1]: Listening on udev Control Socket. m. [[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m. <30>[ 14.454996] systemd[1]: Listening on udev Kernel Socket. <30>[ 14.486440] systemd[1]: Condition check resulted in Huge Pages File System being skipped. Mounting [0;1;39mPOSIX Message Queue File System[0m..<30>[ 14.509735] systemd[1]: Mounting POSIX Message Queue File System... . Mounting [0;1;39mKernel Debug File System[0m...<30>[ 14.549210] systemd[1]: Mounting Kernel Debug File System... Mounting [0;1;39mKernel Trace File System[0m... <30>[ 14.587802] systemd[1]: Mounting Kernel Trace File System... Starting [0;1;39mCreate list of st…odes for the curr<30>[ 14.641614] systemd[1]: Starting Create list of static device nodes for the current kernel... ent kernel[0m... Starting [0;1;39mLoad Kernel Module configfs[0m...<30>[ 14.731601] systemd[1]: Starting Load Kernel Module configfs... Starting [0;1;39mLoad Kernel Module drm[0m... <30>[ 14.780480] systemd[1]: Starting Load Kernel Module drm... Starting [0;1;39mLoad Kernel Module fuse[0m...<30>[ 14.858990] systemd[1]: Starting Load Kernel Module fuse... <30>[ 14.899019] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. Starting [0;1;39mJournal Service[0m... <30>[ 14.932153] systemd[1]: Starting Journal Service... Starting [0;1;39mLoad Kernel Modules[0m...<30>[ 15.000889] systemd[1]: Starting Load Kernel Modules... Starting [0;1;39mRemount Root and Kernel File Systems<30>[ 15.052440] systemd[1]: Starting Remount Root and Kernel File Systems... [0m... Starting [0;1;39mColdplug All udev Devices[0m... <30>[ 15.099973] systemd[1]: Starting Coldplug All udev Devices... [[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m. <30>[ 15.141138] systemd[1]: Mounted POSIX Message Queue File System. [[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0<30>[ 15.192128] systemd[1]: Mounted Kernel Debug File System. m. [[0;32m OK [0m] Mounted [0;1;39mKernel Trace File System[0m. [[0;32m OK [0m] Finished [0;1;39mCreate list of st… nodes<30>[ 15.210184] systemd[1]: Mounted Kernel Trace File System. for the current kernel[0m. <30>[ 15.256381] systemd[1]: Finished Create list of static device nodes for the current kernel. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m. <30>[ 15.293986] systemd[1]: modprobe@configfs.service: Succeeded. <30>[ 15.301858] systemd[1]: Finished Load Kernel Module configfs. <30>[ 15.347584] systemd[1]: modprobe@drm.service: Succeeded. <30>[ 15.368143] systemd[1]: Finished Load Kernel Module drm. <30>[ 15.408346] systemd[1]: modprobe@fuse.service: Succeeded. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m. Mounting [0;1;39mKernel Configuration File System[0m... [[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m. <30>[ 15.475305] systemd[1]: Finished Load Kernel Module fuse. <30>[ 15.505680] systemd[1]: Condition check resulted in FUSE Control File System being skipped. <30>[ 15.511051] systemd[1]: Mounting Kernel Configuration File System... <30>[ 15.571932] systemd[1]: Finished Remount Root and Kernel File Systems. <30>[ 15.614510] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. <30>[ 15.615065] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. Starting [0;1;39mLoad/Save Random Seed[0m... Starting [0;1;39mCreate System Users[0m... [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Modules[0m. [[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m. Starting [0;1;39mApply Kernel Variables[0m... <30>[ 15.690718] systemd[1]: Starting Load/Save Random Seed... <30>[ 15.739905] systemd[1]: Starting Create System Users... <30>[ 15.790293] systemd[1]: Finished Load Kernel Modules. <30>[ 15.825096] systemd[1]: Mounted Kernel Configuration File System. <30>[ 15.859659] systemd[1]: Starting Apply Kernel Variables... [[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m.<30>[ 16.272542] systemd[1]: Finished Load/Save Random Seed. <30>[ 16.292071] systemd[1]: Condition check resulted in First Boot Complete being skipped. [[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m<30>[ 16.349177] systemd[1]: Finished Apply Kernel Variables. . [[0;32m OK [0m] Started [0;1;39mJournal Service[0m.<30>[ 17.210344] systemd[1]: Started Journal Service. Starting [0;1;39mFlush Journal to Persistent Storage[0m... [[0;32m OK [0m] Finished [0;1;39mCreate System Users[0m. Starting [0;1;39mCreate Static Device Nodes in /dev[0m... <46>[ 17.542061] systemd-journald[176]: Received client request to flush runtime journal. [[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m. [[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m. [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems (Pre)[0m. [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m. Starting [0;1;39mRule-based Manage…for Device Events and Files[0m... [[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m. Starting [0;1;39mNetwork Service[0m... [[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m. Starting [0;1;39mCreate Volatile Files and Directories[0m... [[0;32m OK [0m] Found device [0;1;39m/dev/ttyS0[0m. [[0;32m OK [0m] Reached target [0;1;39mHardware activated USB gadget[0m. [[0;32m OK [0m] Started [0;1;39mNetwork Service[0m. [[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m. [[0;32m OK [0m] Reached target [0;1;39mSound Card[0m. Starting [0;1;39mNetwork Name Resolution[0m... Starting [0;1;39mNetwork Time Synchronization[0m... Starting [0;1;39mUpdate UTMP about System Boot/Shutdown[0m... [[0;32m OK [0m] Finished [0;1;39mUpdate UTMP about System Boot/Shutdown[0m. [[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m. [[0;32m OK [0m] Reached target [0;1;39mNetwork[0m. [[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m. [[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronization[0m. [[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m. [[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m. [[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m. [[0;32m OK [0m] Reached target [0;1;39mSystem Time Synchronized[0m. [[0;32m OK [0m] Started [0;1;39mDaily apt download activities[0m. [[0;32m OK [0m] Started [0;1;39mDaily apt upgrade and clean activities[0m. [[0;32m OK [0m] Started [0;1;39mPeriodic ext4 Onli…ata Check for All Filesystems[0m. [[0;32m OK [0m] Started [0;1;39mDiscard unused blocks once a week[0m. [[0;32m OK [0m] Reached target [0;1;39mTimers[0m. [[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m. [[0;32m OK [0m] Reached target [0;1;39mSockets[0m. [[0;32m OK [0m] Reached target [0;1;39mBasic System[0m. [[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m. Starting [0;1;39mRemove Stale Onli…t4 Metadata Check Snapshots[0m... Starting [0;1;39mUser Login Management[0m... Starting [0;1;39mPermit User Sessions[0m... [[0;32m OK [0m] Finished [0;1;39mPermit User Sessions[0m. [[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m. [[0;32m OK [0m] Started [0;1;39mSerial Getty on ttyS0[0m. [[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m. [[0;32m OK [0m] Started [0;1;39mUser Login Management[0m. [[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m. [[0;32m OK [0m] Finished [0;1;39mRemove Stale Onli…ext4 Metadata Check Snapshots[0m. [[0;32m OK [0m] Reached target [0;1;39mGraphical Interface[0m. Starting [0;1;39mUpdate UTMP about System Runlevel Changes[0m... [[0;32m OK [0m] Finished [0;1;39mUpdate UTMP about System Runlevel Changes[0m. Debian GNU/Linux 11 debiseye-armhf login: root (automatic login) Linux debian-bullseye-armhf 5.10.162-cip24-rt10 #1 SMP Fri Jan 27 00:00:46 UTC 2023 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. / # / # export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/834205/extract-nfsrootfs-rt2yr4vq' export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/834205/extract-nfsrootfs-rt2yr4vq' / # export NFS_SERVER_IP='172.16.3.3' export NFS_SERVER_IP='172.16.3.3' / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-834205/environment . /lava-834205/environment / # /lava-834205/bin/lava-test-runner /lava-834205/0 /lava-834205/bin/lava-test-runner /lava-834205/0 + export TESTRUN_ID=0_ltp-io + cd /lava-834205/0/tests/0_ltp-io + cat uuid + UUID=834205_1.6.2.4.1 + set +x + cd ./automated/linux/ltp/ + ./ltp.sh -T io -s true -v -M 3 -R root -b -d /ltp-tmp -g -e -i /opt/ltp -S skipfile-lkft.yaml -p -u -t false -n 1 -c 1 + . ../../lib/sh-test-lib ++ LANG=C ++ export LANG ++ export PATH=/lava-834205/0/../bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin:/usr/sbin:/usr/local/sbin ++ PATH=/lava-834205/0/../bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin:/usr/sbin:/usr/local/sbin ++ kernel_config= ++ pwd + OUTPUT=/lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output + RESULT_FILE=/lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/result.txt ++ readlink -f ./ltp.sh + SCRIPT=/lava-834205/0/tests/0_ltp-io/automated/linux/ltp/ltp.sh ++ dirname /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/ltp.sh + SCRIPTPATH=/lava-834205/0/tests/0_ltp-io/automated/linux/ltp + echo 'Script path is: /lava-834205/0/tests/0_ltp-io/automated/linux/ltp' Script path is: /lava-834205/0/tests/0_ltp-io/automated/linux/ltp + TST_CMDFILES= + SKIPFILE= + SKIPFILE_YAML= + BOARD= + BRANCH= + ENVIRONMENT= + LTP_VERSION=20180926 + TEST_PROGRAM=ltp + TEST_GIT_URL= ++ pwd + TEST_DIR=/lava-834205/0/tests/0_ltp-io/automated/linux/ltp/ltp + BUILD_FROM_TAR=false + SHARD_NUMBER=1 + SHARD_INDEX=1 + LTP_TMPDIR=/ltp-tmp + LTP_INSTALL_PATH=/opt/ltp + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + case \"$arg\" in + TST_CMDFILES=io ++ sed 's,\/,_,' ++ echo io + LOG_FILE=io + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + case \"$arg\" in + SKIP_INSTALL=true + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + case \"$arg\" in + LTP_VERSION= + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + case \"$arg\" in + export LTP_TIMEOUT_MUL=3 + LTP_TIMEOUT_MUL=3 + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + case \"$arg\" in + export PASSWD=root + PASSWD=root + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + case \"$arg\" in + export BOARD= + BOARD= + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + case \"$arg\" in + export LTP_TMPDIR=/ltp-tmp + LTP_TMPDIR=/ltp-tmp + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + case \"$arg\" in + export BRANCH= + BRANCH= + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + case \"$arg\" in + export ENVIRONMENT= + ENVIRONMENT= + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + case \"$arg\" in + export LTP_INSTALL_PATH=/opt/ltp + LTP_INSTALL_PATH=/opt/ltp + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + case \"$arg\" in + '[' -z skipfile-lkft.yaml ']' + '[' yaml = yaml ']' + SKIPFILE_YAML=/lava-834205/0/tests/0_ltp-io/automated/linux/ltp/skipfile-lkft.yaml + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + case \"$arg\" in + [[ '' != '' ]] + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + case \"$arg\" in + [[ '' != '' ]] + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + case \"$arg\" in + BUILD_FROM_TAR=false + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + case \"$arg\" in + SHARD_NUMBER=1 + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + case \"$arg\" in + SHARD_INDEX=1 + getopts M:T:S:b:d:g:e:i:s:v:R:u:p:t:c:n: arg + TEST_TARFILE=https://github.com/linux-test-project/ltp/releases/download//ltp-full-.tar.xz + '[' -n /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/skipfile-lkft.yaml ']' + export SKIPFILE_PATH=/lava-834205/0/tests/0_ltp-io/automated/linux/ltp/generated_skipfile + SKIPFILE_PATH=/lava-834205/0/tests/0_ltp-io/automated/linux/ltp/generated_skipfile + generate_skipfile + info_msg 'Generating a skipfile based on /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/skipfile-lkft.yaml' + local 'msg=Generating a skipfile based on /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/skipfile-lkft.yaml' + '[' -z 'Generating a skipfile based on /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/skipfile-lkft.yaml' ']' + printf 'INFO: %s\n' 'Generating a skipfile based on /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/skipfile-lkft.yaml' INFO: Generating a skipfile based on /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/skipfile-lkft.yaml + detect_abi ++ uname -m + abi=armv7l + case \"${abi}\" in + abi=armeabi + local SKIPGEN_ARGS= + test -n '' + test -n '' + test -n '' + ../../bin/armeabi/skipgen /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/skipfile-lkft.yaml + res=0 + test 0 -eq 0 + info_msg 'Using the following generated skipfile contents (until EOF):' + local 'msg=Using the following generated skipfile contents (until EOF):' + '[' -z 'Using the following generated skipfile contents (until EOF):' ']' + printf 'INFO: %s\n' 'Using the following generated skipfile contents (until EOF):' INFO: Using the following generated skipfile contents (until EOF): + cat /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/generated_skipfile bind06 cve-2018-18559 dio10 dio12 dio13 dio14 dio15 dio16 dio17 dio18 dio19 dio20 dio21 dio22 dio23 dio24 dio25 dio26 dio27 dio28 dio29 dio30 fanotify07 fanotify08 fanotify09 fork13 ftrace_stress_test.sh futex_wake04 gf01 gf14 gf15 gf18 hackbench01 hackbench02 hugemmap06 inotify07 inotify08 ksm01 memcg_stress msgctl10 msgctl11 msgstress03 msgstress04 mtest06 perf_event_open02 ping01 ping602 pth_str01 pth_str02 pth_str03 sendfile09 sendfile09_64 setsockopt06 time-schedule01 + info_msg EOF + local msg=EOF + '[' -z EOF ']' + printf 'INFO: %s\n' EOF INFO: EOF + '[' '!' -f /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/generated_skipfile ']' + SKIPFILE='-S /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/generated_skipfile' + check_root ++ id -ru + '[' 0 -eq 0 ']' + return 0 + create_out_dir /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output + '[' -z /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output ']' + local OUTPUT=/lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output + '[' -d /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output ']' + mkdir -p /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output + '[' -d /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output ']' + info_msg 'About to run ltp test...' + local 'msg=About to run ltp test...' + '[' -z 'About to run ltp test...' ']' + printf 'INFO: %s\n' 'About to run ltp test...' INFO: About to run ltp test... + info_msg 'Output directory: /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output' + local 'msg=Output directory: /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output' + '[' -z 'Output directory: /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output' ']' + printf 'INFO: %s\n' 'Output directory: /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output' INFO: Output directory: /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output + '[' true = true ']' + info_msg 'ltp installation skipped altogether' + local 'msg=ltp installation skipped altogether' + '[' -z 'ltp installation skipped altogether' ']' + printf 'INFO: %s\n' 'ltp installation skipped altogether' INFO: ltp installation skipped altogether + '[' '!' -d /opt/ltp ']' + info_msg 'Running prep_system' + local 'msg=Running prep_system' + '[' -z 'Running prep_system' ']' + printf 'INFO: %s\n' 'Running prep_system' INFO: Running prep_system + prep_system + systemctl is-active systemd-timesyncd active + info_msg 'Stopping systemd-timesyncd' + local 'msg=Stopping systemd-timesyncd' + '[' -z 'Stopping systemd-timesyncd' ']' + printf 'INFO: %s\n' 'Stopping systemd-timesyncd' INFO: Stopping systemd-timesyncd + systemctl stop systemd-timesyncd + '[' -f /proc/sys/kernel/unprivileged_userns_clone ']' + info_msg 'Kernel has no support of unprivileged_userns_clone' + local 'msg=Kernel has no support of unprivileged_userns_clone' + '[' -z 'Kernel has no support of unprivileged_userns_clone' ']' + printf 'INFO: %s\n' 'Kernel has no support of unprivileged_userns_clone' INFO: Kernel has no support of unprivileged_userns_clone + info_msg 'Running run_ltp' + local 'msg=Running run_ltp' + '[' -z 'Running run_ltp' ']' + printf 'INFO: %s\n' 'Running run_ltp' INFO: Running run_ltp + run_ltp + cd /opt/ltp + mkdir -m 777 -p /ltp-tmp + for file in ${TST_CMDFILES//,/ } + cat runtest/io + sed -i 's/#.*$//;/^$/d' alltests + split --verbose --numeric-suffixes=1 -n l/1/1 alltests + echo '============== Tests to run ===============' ============== Tests to run =============== + cat runtest/shardfile aio01 aio01 aio02 aio02 + echo '===========End Tests to run ===============' ===========End Tests to run =============== + pipe0_status './runltp -p -q -f shardfile -l /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.log -C /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.failed -d /ltp-tmp -S /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/generated_skipfile' 'tee /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.out' + '[' 2 -ne 2 ']' + local 'cmd1=./runltp -p -q -f shardfile -l /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.log -C /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.failed -d /ltp-tmp -S /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/generated_skipfile' + local 'cmd2=tee /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.out' + exec + local ret_val ++ eval 'tee /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.out' +++ tee /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.out ++ eval './runltp -p -q -f shardfile -l /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.log -C /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.failed -d /ltp-tmp -S /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/generated_skipfile' +++ ./runltp -p -q -f shardfile -l /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.log -C /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.failed -d /ltp-tmp -S /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/generated_skipfile INFO: creating /opt/ltp/output directory Checking for required user/group ids 'root' user id and group found. 'nobody' user id and group found. 'bin' user id and group found. 'daemon' user id and group found. Users group found. Sys group found. Required users/groups exist. no big block device was specified on commandline. Tests which require a big block device are disabled. You can specify it with option -z INFO: Test start time: Fri Jan 27 01:10:36 UTC 2023 COMMAND: /opt/ltp/bin/ltp-pan -q -e -S -a 283 -n 283 -p -f /ltp-tmp/ltp-WrcQ3NToIH/alltests -l /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.log -C /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.failed -T /opt/ltp/output/LTP_RUN_ON-LTP_io.log.tconf LOG File: /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.log FAILED COMMAND File: /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.failed TCONF COMMAND File: /opt/ltp/output/LTP_RUN_ON-LTP_io.log.tconf Running tests....... aio01 1 TCONF : aio01.c:421: test requires libaio and it's development packages aio01 2 TCONF : aio01.c:421: Remaining cases not appropriate for configuration tst_test.c:1137: TCONF: test requires libaio and its development packages INFO: ltp-pan reported all tests PASS LTP Version: 20220930-273-gd042c168d INFO: Test end time: Fri Jan 27 01:10:37 UTC 2023 ############################################################### Done executing testcases. LTP Version: 20220930-273-gd042c168d ############################################################### ++ echo 0 + ret_val=0 + exec + return 0 + parse_ltp_output /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.log + grep -E 'PASS|FAIL|CONF' /lava-834205/0/tests/0_ltp-io/automated/linux/ltp/output/LTP_io.log + sed 's/PASS/pass/; s/FAIL/fail/; s/CONF/skip/' + awk '{print $1\" \"$2}' + rm -rf /ltp-tmp + rm -rf alltests + ../../utils/send-to-lava.sh ./output/result.txt + set +x / #