Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. RomBOOT AT91Bootstrap 3.7.2-rc2-dirty (Tue 14 Apr 02:17:07 BST 2015) NAND: ONFI not supported NAND: Manufacturer ID: 0xec Chip ID: 0xda NAND: Disable On-Die ECC NAND: Press the recovery button (BP4) to recovery NAND: Using Software ECC NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x21f00000 NAND: Done to load image U-Boot 2015.01 (Apr 14 2015 - 16:45:04) CPU: AT91SAM9G20 Crystal frequency: 18.432 MHz CPU clock : 396.288 MHz Master clock : 132.096 MHz DRAM: 64 MiB WARNING: Caches not enabled NAND: 256 MiB MMC: mci: 0 In: serial Out: serial Err: serial Net: macb0 Hit any key to stop autoboot: 3  0 U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp macb0: Starting autonegotiation... macb0: Autonegotiation complete macb0: link up, 100Mbps full-duplex (lpa: 0xc1e1) BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 *** Unhandled DHCP Option in OFFER/ACK: 42 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.56.22 (3792 ms) U-Boot> setenv serverip 192.168.56.230 setenv serverip 192.168.56.230 U-Boot> tftp 0x22100000 71813/tftp-deploy-506fs6wa/kernel/zImage tftp 0x22100000 71813/tftp-deploy-506fs6wa/kernel/zImage macb0: link up, 100Mbps full-duplex (lpa: 0xc1e1) Using macb0 device TFTP from server 192.168.56.230; our IP address is 192.168.56.22 Filename '71813/tftp-deploy-506fs6wa/kernel/zImage'. Load address: 0x22100000 Loading: *################################################################################################################################################################################################################################################################################################################################################################################################################################### 1.2 MiB/s done Bytes transferred = 6232416 (5f1960 hex) U-Boot> tftp 0x23000000 71813/tftp-deploy-506fs6wa/ramdisk/ramdisk.cpio.gz.uboot tftp 0x23000000 71813/tftp-deploy-506fs6wa/ramdisk/ramdisk.cpio.gz.uboot macb0: link up, 100Mbps full-duplex (lpa: 0xc1e1) Using macb0 device TFTP from server 192.168.56.230; our IP address is 192.168.56.22 Filename '71813/tftp-deploy-506fs6wa/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x23000000 Loading: *########################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################## 1.2 MiB/s done Bytes transferred = 8484716 (81776c hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x22000000 71813/tftp-deploy-506fs6wa/dtb/at91sam9g20ek.dtb tftp 0x22000000 71813/tftp-deploy-506fs6wa/dtb/at91sam9g20ek.dtb macb0: link up, 100Mbps full-duplex (lpa: 0xc1e1) Using macb0 device TFTP from server 192.168.56.230; our IP address is 192.168.56.22 Filename '71813/tftp-deploy-506fs6wa/dtb/at91sam9g20ek.dtb'. Load address: 0x22000000 Loading: *## 1.1 MiB/s done Bytes transferred = 16715 (414b hex) U-Boot> setenv bootargs ' root=/dev/ram0 cma=0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs ' root=/dev/ram0 cma=0 console_msg_format=syslog earlycon ip=dhcp' U-Boot> bootz 0x22100000 0x23000000 0x22000000 bootz 0x22100000 0x23000000 0x22000000 Kernel image @ 0x22100000 [ 0x000000 - 0x5f1960 ] ## Loading init Ramdisk from Legacy Image at 23000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 8484652 Bytes = 8.1 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 22000000 Booting using the fdt blob at 0x22000000 Using Device Tree in place at 22000000, end 2200714a Starting kernel ... <6>Booting Linux on physical CPU 0x0 <5>Linux version 5.10.168-cip27-rt11 (KernelCI@build-j1102034-arm-gcc-10-multi-v5-defconfig-bljwb) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 PREEMPT Fri Feb 24 22:51:59 UTC 2023 <6>CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f <6>CPU: VIVT data cache, VIVT instruction cache <6>OF: fdt: Machine model: Atmel at91sam9g20ek <4>Malformed early option 'earlycon' <6>Memory policy: Data cache writethrough <6>Zone ranges: <6> DMA [mem 0x0000000020000000-0x0000000023ffffff] <6> Norm <6>Movable zone start for each node <6>Early memory node ranges <6> node 0: [mem 0x0000000020000000-0x0000000023ffffff] <6>Initmem setup node 0 [mem 0x0000000020000000-0x0000000023ffffff] <6>Built 1 zonelists, mobility grouping on. Total pages: 16256 <5>Kernel command line: root=/dev/ram0 cma=0 console_msg_format=syslog earlycon ip=dhcp <6>Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>mem auto-init: stack:off, heap alloc:off, heap free:off <6>Memory: 41508K/65536K available (9288K kernel code, 2039K rwdata, 2424K rodata, 352K init, 693K bss, 24028K reserved, 0K cma-reserved, 0K highmem) <6>SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>rcu: Preemptible hierarchical RCU implementation. <6>rcu: <6> Trampoline variant of Tasks RCU enabled. <6>rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>clocksource: pit: mask: 0xfffffff max_cycles: 0xfffffff, max_idle_ns: 14468723050 ns <6>clocksource: timer@fffa0000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 115 bits at 16MHz, resolution 60ns, wraps every 130055938017ns <6>Switching to timer-based delay loop, resolution 60ns <6>Console: colour dummy device 80x30 <6>printk: console [tty0] enabled <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 33.02 BogoMIPS (lpj=165120) <6>pid_max: default: 32768 minimum: 301 <6>Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>CPU: Testing write buffer coherency: ok <6>Setting up static identity map for 0x20008400 - 0x2000847c <6>rcu: Hierarchical SRCU implementation. <6>devtmpfs: initialized <6>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>pinctrl core: initialized pinctrl subsystem <6>NET: Registered protocol family 16 <6>DMA: preallocated 256 KiB pool for atomic coherent allocations <6>thermal_sys: Registered thermal governor 'step_wise' <6>cpuidle: using governor menu <6>AT91: PM: standby: standby, suspend: ulp0 <6>gpio-at91 fffff400.gpio: at address (ptrval) <6>gpio-at91 fffff600.gpio: at address (ptrval) <6>gpio-at91 fffff800.gpio: at address (ptrval) <6>pinctrl-at91 ahb:apb:pinctrl@fffff400: initialized AT91 pinctrl driver <4>atmel_tcb: probe of fffa0000.timer failed with error -16 <6>Kprobes globally optimized <6>AT91: Detected SoC: at91sam9g20, revision 1 <6>vgaarb: loaded <5>SCSI subsystem initialized <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>mc: Linux media interface: v0.10 <6>videodev: Linux video capture interface: v2.00 <6>pps_core: LinuxPPS API ver. 1 registered <6>pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>PTP clock support registered <6>Advanced Linux Sound Architecture Driver Initialized. <6>clocksource: Switched to clocksource timer@fffa0000 <6>NET: Registered protocol family 2 <6>IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) <6>tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>TCP: Hash tables configured (established 1024 bind 1024) <6>UDP hash table entries: 256 (order: 0, 4096 bytes, linear) <6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) <6>NET: Registered protocol family 1 <6>RPC: Registered named UNIX socket transport module. <6>RPC: Registered udp transport module. <6>RPC: Registered tcp transport module. <6>RPC: Registered tcp NFSv4.1 backchannel transport module. <6>PCI: CLS 0 bytes, default 32 <6>Unpacking initramfs... <6>Freeing initrd memory: 8288K <5>Initialise system trusted keyrings <6>workingset: timestamp_bits=30 max_order=14 bucket_order=0 <6>jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. <5>Key type asymmetric registered <5>Asymmetric key parser 'x509' registered <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) <6>io scheduler mq-deadline registered <6>io scheduler kyber registered <6>Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled <6>loop: module loaded <4>atmel_usart_serial: Failed to locate of_node [id: -2] <6>atmel_usart_serial.0.auto: ttyAT0 at MMIO 0xfffff200 (irq = 16, base_baud = 8256000) is a ATMEL_SERIAL <6>printk: console [ttyAT0] enabled <4>atmel_usart_serial: Failed to locate of_node [id: -2] <6>atmel_usart_serial.1.auto: ttyAT1 at MMIO 0xfffb0000 (irq = 26, base_baud = 8256000) is a ATMEL_SERIAL <4>atmel_usart_serial: Failed to locate of_node [id: -2] <6>atmel_usart_serial.2.auto: ttyAT2 at MMIO 0xfffb4000 (irq = 27, base_baud = 8256000) is a ATMEL_SERIAL <6>macb fffc4000.ethernet eth0: Cadence MACB rev 0x0001010c at 0xfffc4000 irq 28 (a6:72:4e:7e:7a:f8) <6>libertas_sdio: Libertas SDIO driver <6>libertas_sdio: Copyright Pierre Ossman <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>ehci-pci: EHCI PCI platform driver <6>ehci-orion: EHCI orion driver <6>ehci-atmel: EHCI Atmel driver <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>ohci-pci: OHCI PCI platform driver <6>ohci-atmel: OHCI Atmel driver <6>at91_ohci 500000.ohci: USB Host Controller <6>at91_ohci 500000.ohci: new USB bus registered, assigned bus number 1 <6>at91_ohci 500000.ohci: irq 33, io mem 0x00500000 <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 2 ports detected <6>ohci-da8xx: DA8XX <6>usbcore: registered new interface driver usb-storage <6>usbcore: registered new interface driver ums-datafab <6>usbcore: registered new interface driver ums-freecom <6>usbcore: registered new interface driver ums-jumpshot <6>usbcore: registered new interface driver ums-sddr09 <6>usbcore: registered new interface driver ums-sddr55 <6>i2c /dev entries driver <6>at91-reset fffffd00.rstc: Starting after general reset <3>at91_wdt fffffd40.watchdog: watchdog is disabled <4>at91_wdt: probe of fffffd40.watchdog failed with error -22 <6>usbcore: registered new interface driver usbhid <6>usbhid: USB HID core driver <6>nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda <6>nand: Samsung NAND 256MiB 3,3V 8-bit <6>nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 <6>Bad block table found at page 131008, version 0x01 <6>Bad block table found at page 130944, version 0x01 <6>nand_read_bbt: bad block at 0x000006120000 <6>nand_read_bbt: bad block at 0x00000d880000 <5>8 fixed-partitions partitions found on MTD device atmel_nand <5>Creating 8 MTD partitions on \"atmel_nand\": <5>0x000000000000-0x000000020000 : \"at91bootstrap\" <6>atmel_mci fffa8000.mmc: version: 0x210 <6>atmel_mci fffa8000.mmc: using PDC <5>0x000000020000-0x000000060000 : \"barebox\" <5>0x000000060000-0x000000080000 : \"bareboxenv\" <5>0x000000080000-0x0000000a0000 : \"bareboxenv2\" <5>0x0000000a0000-0x0000000c0000 : \"oftree\" <5>0x0000000c0000-0x0000004c0000 : \"kernel\" <5>0x0000004c0000-0x000007cc0000 : \"rootfs\" <6>atmel_mci fffa8000.mmc: Atmel MCI controller at 0xfffa8000 irq 30, 1 slots <5>0x000007cc0000-0x000010000000 : \"data\" <6>NET: Registered protocol family 10 <6>Segment Routing with IPv6 <6>sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>NET: Registered protocol family 17 <6>lib80211: common routines for IEEE802.11 drivers <6>oprofile: no performance counters <6>oprofile: using timer interrupt. <6>printk: console [ttyAT0]: printing thread started <6>printk: console [tty0]: printing thread started <5>Loading compiled-in X.509 certificates <6>input: gpio_keys as /devices/platform/gpio_keys/input/input0 <6>macb fffc4000.ethernet eth0: PHY [fffc4000.ethernet-ffffffff:00] driver [Davicom DM9161A] (irq=POLL) <6>macb fffc4000.ethernet eth0: configuring for phy/rmii link mode <6>macb fffc4000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>Sending DHCP requests ..., OK <6>IP-Config: Got DHCP answer from 192.168.56.254, my address is 192.168.56.22 <6>IP-Config: Complete: <6> device=eth0, hwaddr=a6:72:4e:7e:7a:f8, ipaddr=192.168.56.22, mask=255.255.255.0, gw=192.168.56.254 <6> host=192.168.56.22, domain=mayfield.sirena.org.uk, nis-domain=(none) <6> bootserver=192.168.56.254, rootserver=192.168.56.254, rootpath= <6> nameserver0=192.168.56.254 <6> ntpserver0=50.205.244.22, ntpserver1=85.199.214.99 <5>cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <6>ALSA device list: <6> No soundcards found. <6>Freeing unused kernel memory: 352K <4>Kernel memory protection not selected by kernel config. <6>Run /init as init process <4>platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>cfg80211: failed to load regulatory.db Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>udevd[91]: starting version 3.2.9 <5>random: udevd: uninitialized urandom read (16 bytes read) <5>random: udevd: uninitialized urandom read (16 bytes read) <5>random: udevd: uninitialized urandom read (16 bytes read) <27>udevd[91]: specified user 'tss' unknown <27>udevd[91]: specified group 'tss' unknown <30>udevd[92]: starting eudev-3.2.9 006 <6>ssc fffbc000.ssc: Atmel SSC device at 0x(ptrval) (irq 31) <6>iio iio:device0: Resolution used: 10 bits <6>iio iio:device0: not support touchscreen in the adc compatible string. <4>rtc-at91sam9 fffffd20.rtc: rtc0: SET TIME! <6>rtc-at91sam9 fffffd20.rtc: registered as rtc0 <3>rtc-at91sam9 fffffd20.rtc: hctosys: unable to read the hardware clock <3>at91sam9g20ek-audio sound: snd_soc_register_card() failed done Saving random seed: <5>random: dd: uninitialized urandom read (32 bytes read) OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <5>random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-71813/environment . /lava-71813/environment / # /lava-71813/bin/lava-test-runner /lava-71813/0 /lava-71813/bin/lava-test-runner /lava-71813/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-71813/0/tests/0_dmesg + cat uuid + UUID=71813_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8> <8> <8> + set +x <8> <8> / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-71813/environment / # . /lava-71813/environment/lava-71813/bin/lava-test-runner /lava-71813/1 / # /lava-71813/bin/lava-test-runner /lava-71813/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-71813/1/tests/1_bootrr + cat uuid + UUID=71813_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-71813/1/../bin:/sbin:/usr/s<8> /lava-71813/1/../bin/lava-test-case <8> /lava-71813/1/../bin/lava-test-case <8> + set +x