connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/912789/tftp-deploy-eggvgmud/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/912789/tftp-deploy-eggvgmud/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/912789/tftp-deploy-eggvgmud/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/912789/tftp-deploy-eggvgmud/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/912789/tftp-deploy-eggvgmud/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/912789/tftp-deploy-eggvgmud/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address ce:cb:69:d5:3b:6d T eth0: DHCP client bound to address 10.8.254.28 Loading ARM Linux zImage '/mnt/tftp/912789/tftp-deploy-eggvgmud/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12e41000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/912789/tftp-deploy-eggvgmud/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18f53174 Loading devicetree from '/mnt/tftp/912789/tftp-deploy-eggvgmud/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x12e41000, initrd at 0x18000000, oftree at 0x18f54000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.168-cip27-rt11 (KernelCI@build-j1102041-arm-gcc-10-multi-v7-defconfig-f822c) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Fri Feb 24 22:52:04 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s33612 r8192 d23732 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1971988K/2097152K available (14336K kernel code, 2325K rwdata, 5348K rodata, 2048K init, 416K bss, 59628K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000017] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003908] Console: colour dummy device 80x30 [ 0.003955] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.003970] pid_max: default: 32768 minimum: 301 [ 0.004157] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004180] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004849] CPU: Testing write buffer coherency: ok [ 0.004878] CPU0: Spectre v2: using BPIALL workaround [ 0.005144] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005863] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.007512] rcu: Hierarchical SRCU implementation. [ 0.011093] EFI services will not be available. [ 0.011409] smp: Bringing up secondary CPUs ... [ 0.012246] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.012262] CPU1: Spectre v2: using BPIALL workaround [ 0.013202] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.013216] CPU2: Spectre v2: using BPIALL workaround [ 0.014132] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.014146] CPU3: Spectre v2: using BPIALL workaround [ 0.014263] smp: Brought up 1 node, 4 CPUs [ 0.014277] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.014286] CPU: All CPU(s) started in SVC mode. [ 0.014901] devtmpfs: initialized [ 0.022027] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.022256] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.022279] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.025486] pinctrl core: initialized pinctrl subsystem [ 0.027288] DMI not present or invalid. [ 0.028114] NET: Registered protocol family 16 [ 0.031269] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.033607] thermal_sys: Registered thermal governor 'step_wise' [ 0.033793] cpuidle: using governor menu [ 0.033924] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.182444] vdd1p1: supplied by regulator-dummy [ 0.189769] vdd3p0: supplied by regulator-dummy [ 0.196986] vdd2p5: supplied by regulator-dummy [ 0.204260] vddarm: supplied by regulator-dummy [ 0.211693] vddpu: supplied by regulator-dummy [ 0.218771] vddsoc: supplied by regulator-dummy [ 0.586832] No ATAGs? [ 0.586982] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.586994] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.591080] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.596984] Serial: AMBA PL011 UART driver [ 0.627073] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.pinctrl; cannot claim for regulator-usbotgvbus [ 0.627088] imx6q-pinctrl 20e0000.pinctrl: pin-42 (regulator-usbotgvbus) status -22 [ 0.627101] imx6q-pinctrl 20e0000.pinctrl: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.pinctrl [ 0.627113] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.627129] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.630447] iommu: Default domain type: Translated [ 0.630732] vgaarb: loaded [ 0.631595] SCSI subsystem initialized [ 0.632086] usbcore: registered new interface driver usbfs [ 0.632135] usbcore: registered new interface driver hub [ 0.632188] usbcore: registered new device driver usb [ 0.633366] i2c i2c-0: IMX I2C adapter registered [ 0.635092] i2c i2c-1: IMX I2C adapter registered [ 0.636368] i2c i2c-2: IMX I2C adapter registered [ 0.637701] pps_core: LinuxPPS API ver. 1 registered [ 0.637708] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.637726] PTP clock support registered [ 0.641578] clocksource: Switched to clocksource mxc_timer1 [ 1.717555] NET: Registered protocol family 2 [ 1.717919] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.719058] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.719103] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.719184] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.719323] TCP: Hash tables configured (established 8192 bind 8192) [ 1.719495] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.719535] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.719701] NET: Registered protocol family 1 [ 1.720432] RPC: Registered named UNIX socket transport module. [ 1.720442] RPC: Registered udp transport module. [ 1.720446] RPC: Registered tcp transport module. [ 1.720450] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.720458] PCI: CLS 0 bytes, default 64 [ 1.720964] Trying to unpack rootfs image as initramfs... [ 3.087520] Freeing initrd memory: 15696K [ 3.087976] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 3.088420] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 3.090249] Initialise system trusted keyrings [ 3.090583] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 3.096578] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.097337] NFS: Registering the id_resolver key type [ 3.097380] Key type id_resolver registered [ 3.097385] Key type id_legacy registered [ 3.097478] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.097485] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 3.097516] ntfs: driver 2.1.32 [Flags: R/O]. [ 3.097982] Key type asymmetric registered [ 3.097990] Asymmetric key parser 'x509' registered [ 3.098037] bounce: pool size: 64 pages [ 3.098079] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 3.098086] io scheduler mq-deadline registered [ 3.098092] io scheduler kyber registered [ 3.135734] mxs-dma 110000.dma-apbh: initialized [ 3.140622] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 3.140640] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 3.203104] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 3.207584] SuperH (H)SCI(F) driver initialized [ 3.208520] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX [ 3.208575] printk: console [ttymxc0] enabled [ 3.209656] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 77, base_baud = 5000000) is a IMX [ 3.211087] msm_serial: driver initialized [ 3.211330] STMicroelectronics ASC driver initialized [ 3.213280] STM32 USART driver initialized [ 3.232604] brd: module loaded [ 3.242155] loop: module loaded [ 3.246089] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 3.246104] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 3.246115] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 3.246125] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 3.246199] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 3.246391] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 3.246454] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 3.249279] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 3.249306] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 3.249324] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 3.250731] scsi host0: ahci-imx [ 3.251087] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 84 [ 3.263427] CAN device driver interface [ 3.264705] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 3.268356] pps pps0: new PPS source ptp0 [ 3.299915] fec 2188000.ethernet eth0: registered PHC device 0 [ 3.301591] e1000e: Intel(R) PRO/1000 Network Driver [ 3.301597] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.301664] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.301670] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.307553] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 3.307599] usbcore: registered new interface driver pegasus [ 3.307640] usbcore: registered new interface driver asix [ 3.307673] usbcore: registered new interface driver ax88179_178a [ 3.307708] usbcore: registered new interface driver cdc_ether [ 3.307759] usbcore: registered new interface driver smsc75xx [ 3.307802] usbcore: registered new interface driver smsc95xx [ 3.307835] usbcore: registered new interface driver net1080 [ 3.307875] usbcore: registered new interface driver cdc_subset [ 3.307904] usbcore: registered new interface driver zaurus [ 3.307974] usbcore: registered new interface driver cdc_ncm [ 3.311497] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.311505] ehci-pci: EHCI PCI platform driver [ 3.311545] ehci-platform: EHCI generic platform driver [ 3.311848] ehci-orion: EHCI orion driver [ 3.312065] SPEAr-ehci: EHCI SPEAr driver [ 3.312244] ehci-st: EHCI STMicroelectronics driver [ 3.312422] ehci-exynos: EHCI Exynos driver [ 3.312619] ehci-atmel: EHCI Atmel driver [ 3.312793] tegra-ehci: Tegra EHCI driver [ 3.313003] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.313023] ohci-pci: OHCI PCI platform driver [ 3.313072] ohci-platform: OHCI generic platform driver [ 3.313315] SPEAr-ohci: OHCI SPEAr driver [ 3.313494] ohci-st: OHCI STMicroelectronics driver [ 3.313676] ohci-atmel: OHCI Atmel driver [ 3.314723] usbcore: registered new interface driver usb-storage [ 3.322775] i2c /dev entries driver [ 3.342002] sdhci: Secure Digital Host Controller Interface driver [ 3.342008] sdhci: Copyright(c) Pierre Ossman [ 3.344603] Synopsys Designware Multimedia Card Interface Driver [ 3.346482] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.351742] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 3.351975] ledtrig-cpu: registered to indicate activity on CPUs [ 3.352106] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 3.353349] usbcore: registered new interface driver usbhid [ 3.353358] usbhid: USB HID core driver [ 3.359965] NET: Registered protocol family 10 [ 3.361067] Segment Routing with IPv6 [ 3.361144] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.361814] NET: Registered protocol family 17 [ 3.361833] can: controller area network core [ 3.361917] NET: Registered protocol family 29 [ 3.361924] can: raw protocol [ 3.361931] can: broadcast manager protocol [ 3.361941] can: netlink gateway - max_hops=1 [ 3.362363] Key type dns_resolver registered [ 3.364427] ThumbEE CPU extension supported. [ 3.364448] Registering SWP/SWPB emulation handler [ 3.365557] printk: console [ttymxc0]: printing thread started [ 3.365612] Loading compiled-in X.509 certificates [ 3.381897] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 3.384125] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 3.384522] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 3.393540] imx_usb 2184200.usb: No over current polarity defined [ 3.397004] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 3.397029] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 3.421469] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 3.422123] hub 1-0:1.0: USB hub found [ 3.422162] hub 1-0:1.0: 1 port detected [ 3.424268] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 3.597981] ata1: SATA link down (SStatus 0 SControl 300) [ 3.598030] ahci-imx 2200000.sata: no device found, disabling link. [ 3.598037] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 4.703852] Freeing unused kernel memory: 2048K [ 4.722501] Run /init as init process [ 4.742002] mmc0: host does not support reading read-only switch, assuming write-enable [ 4.744237] mmc0: new high speed SDHC card at address 1234 [ 4.745721] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 4.761530] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK [ 4.818477] mmc2: new DDR MMC card at address 0001 Starting klogd: [ 4.819909] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 4.820861] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB OK [ 4.821774] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 4.822032] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (235:0) Running sysctl: [ 4.852257] mmcblk2: p1 p2 OK Populating /dev using udev: [ 4.883836] udevd[125]: starting version 3.2.9 [ 4.884682] random: udevd: uninitialized urandom read (16 bytes read) [ 4.884893] random: udevd: uninitialized urandom read (16 bytes read) [ 4.884992] random: udevd: uninitialized urandom read (16 bytes read) [ 4.893547] udevd[125]: specified user 'tss' unknown [ 4.893829] udevd[125]: specified group 'tss' unknown [ 4.897908] udevd[126]: starting eudev-3.2.9 [ 5.004765] hub 1-1:1.0: USB hub found [ 5.005946] hub 1-1:1.0: 4 ports detected [ 5.357461] imx-ipuv3 2400000.ipu: IPUv3H probed [ 5.360670] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 5.360922] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 5.361137] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 5.361351] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 5.367737] imx-ipuv3 2800000.ipu: IPUv3H probed [ 5.542007] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) [ 5.542138] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) [ 5.542283] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) [ 5.542400] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) [ 5.542613] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 5.543962] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 5.544414] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0 [ 5.544494] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 5.545510] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 5.626554] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 5.626920] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 5.627239] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 5.627325] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 5.627601] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 5.627670] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 5.627684] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 5.628083] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 1 [ 5.826236] caam 2100000.crypto: Entropy delay = 3200 [ 5.887034] caam 2100000.crypto: Instantiated RNG4 SH0 [ 5.947795] caam 2100000.crypto: Instantiated RNG4 SH1 [ 5.947816] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 5.947826] caam 2100000.crypto: job rings = 2, qi = 0 [ 6.110806] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 6.116275] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 6.326355] caam algorithms registered in /proc/crypto [ 6.327698] caam 2100000.crypto: registering rng-caam done Saving random seed: OK [ 6.410536] random: dd: uninitialized urandom read (32 bytes read) Starting network: OK Starting dropbear sshd: [ 6.510144] random: crng init done [ 6.510158] random: 1 urandom warning(s) missed due to ratelimiting OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-912789/environment . /lava-912789/environment / # /lava-912789/bin/lava-test-runner /lava-912789/0 /lava-912789/bin/lava-test-runner /lava-912789/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-912789/0/tests/0_dmesg + cat uuid + UUID=912789_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /[ 7.087655] opt/kernelci/dmesg.sh [ 7.137893] [ 7.172592] + set +x [ 7.206973] [ 7.208281] / # #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-912789/environment / # . /lava-912789/environment/lava-912789/bin/lava-test-runner /lava-912789/1 / # /lava-912789/bin/lava-test-runner /lava-912789/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-912789/1/tests/1_bootrr + cat uuid + UUID=912789_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-91[ 7.703446] 2789/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-912789/1/../bin/lava-test-case [ 8.772084] /lava-912789/1/../bin/lava-test-case /lava-912789/1/../bin/lava-test-c[ 8.812235] ase [ 8.830741] + set +x [ 8.849756] / #