Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. ser2net port 3009 device /dev/ttyimx7d-sdb-2 [115200 N81] (Debian GNU/Linux) U-Boot 2016.03-imx_v2016.03_4.1.15_2.0.0_ga+g0ec2a01 (Nov 11 2016 - 03:13:54 -0600) CPU: Freescale i.MX7D rev1.3 996 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 25C Reset cause: POR Board: i.MX7D SABRESD RevA I2C: ready DRAM: 1 GiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment Display: TFT43AB (480x272) Video: 480x272x24 In: serial Out: serial Err: serial switch to partitions #0, OK mmc0 is current device Net: FEC0 Normal Boot Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 172.16.1.233 (1309 ms) => setenv serverip 59.144.98.45 setenv serverip 59.144.98.45 => tftp 0x80800000 1181723/tftp-deploy-2y6lf7y7/kernel/zImage tftp 0x80800000 1181723/tftp-deploy-2y6lf7y7/kernel/zImage Using FEC0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.233; sending through gateway 172.16.1.4 Filename '1181723/tftp-deploy-2y6lf7y7/kernel/zImage'. Load address: 0x80800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #### 10.3 MiB/s done Bytes transferred = 10553888 (a10a20 hex) => tftp 0x86800000 1181723/tftp-deploy-2y6lf7y7/ramdisk/ramdisk.cpio.gz.uboot tftp 0x86800000 1181723/tftp-deploy-2y6lf7y7/ramdisk/ramdisk.cpio.gz.uboot Using FEC0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.233; sending through gateway 172.16.1.4 Filename '1181723/tftp-deploy-2y6lf7y7/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x86800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 10.2 MiB/s done Bytes transferred = 10192053 (9b84b5 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x83000000 1181723/tftp-deploy-2y6lf7y7/dtb/imx7d-sdb.dtb tftp 0x83000000 1181723/tftp-deploy-2y6lf7y7/dtb/imx7d-sdb.dtb Using FEC0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.233; sending through gateway 172.16.1.4 Filename '1181723/tftp-deploy-2y6lf7y7/dtb/imx7d-sdb.dtb'. Load address: 0x83000000 Loading: *### 5.2 MiB/s done Bytes transferred = 37996 (946c hex) => setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x80800000 0x86800000 0x83000000 bootz 0x80800000 0x86800000 0x83000000 Kernel image @ 0x80800000 [ 0x000000 - 0xa10a20 ] ## Loading init Ramdisk from Legacy Image at 86800000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 10191989 Bytes = 9.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 8300c46b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.175-cip29-rt12 (KernelCI@build-j1227317-arm-gcc-10-imx-v6-v7-defconfig-pvkj5) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Mar 22 12:40:39 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Freescale i.MX7 SabreSD Board [ 0.000000] earlycon: ec_imx6q0 at MMIO 0x30860000 (options '') [ 0.000000] printk: bootconsole [ec_imx6q0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x00000000afffffff] [ 0.000000] HighMem [mem 0x00000000b0000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] percpu: Embedded 16 pages/cpu s35820 r8192 d21524 u65536 [ 0.000000] pcpu-alloc: s35820 r8192 d21524 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 933596K/1048576K available (14336K kernel code, 2046K rwdata, 4852K rodata, 1024K init, 6651K bss, 49444K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] Running RCU self tests <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU lockdep checking is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (virt). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns <6>[ 0.000001] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns <6>[ 0.008280] Switching to timer-based delay loop, resolution 125ns <6>[ 0.015290] Switching to timer-based delay loop, resolution 41ns <6>[ 0.020969] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.029106] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.041330] Console: colour dummy device 80x30 <4>[ 0.043723] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.051801] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.056138] ... MAX_LOCK_DEPTH: 48 <4>[ 0.060601] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 0.065266] ... CLASSHASH_SIZE: 4096 <4>[ 0.069876] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.074601] ... MAX_LOCKDEP_CHAINS: 65536 <4>[ 0.079352] ... CHAINHASH_SIZE: 32768 <4>[ 0.084051] memory used by lock dependency info: 4061 kB <4>[ 0.089764] memory used for stack traces: 2112 kB <4>[ 0.094813] per task-struct memory footprint: 1536 bytes <6>[ 0.100606] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.111211] pid_max: default: 32768 minimum: 301 <6>[ 0.116495] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.123737] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.135949] CPU: Testing write buffer coherency: ok <6>[ 0.139562] CPU0: update cpu_capacity 1024 <6>[ 0.142751] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.152270] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.157098] rcu: Hierarchical SRCU implementation. <6>[ 0.164036] smp: Bringing up secondary CPUs ... <6>[ 0.170104] smp: Brought up 1 node, 1 CPU <6>[ 0.171809] SMP: Total of 1 processors activated (48.00 BogoMIPS). <6>[ 0.178026] CPU: All CPU(s) started in SVC mode. <6>[ 0.186390] devtmpfs: initialized <6>[ 0.247019] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.253750] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.262411] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.272535] pinctrl core: initialized pinctrl subsystem <6>[ 0.283400] NET: Registered protocol family 16 <6>[ 0.348461] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.362086] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.362398] cpuidle: using governor menu <6>[ 0.371894] No ATAGs? <6>[ 0.372915] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.381002] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.551328] imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver <6>[ 0.561155] imx7d-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver <6>[ 0.763647] vgaarb: loaded <5>[ 0.766924] SCSI subsystem initialized <7>[ 0.769117] libata version 3.00 loaded. <6>[ 0.773689] usbcore: registered new interface driver usbfs <6>[ 0.778471] usbcore: registered new interface driver hub <6>[ 0.783800] usbcore: registered new device driver usb <4>[ 0.789666] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator <4>[ 0.798197] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests <4>[ 0.807061] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator <4>[ 0.814280] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests <6>[ 0.849780] i2c i2c-0: IMX I2C adapter registered <6>[ 0.874026] i2c i2c-1: IMX I2C adapter registered <6>[ 0.878876] i2c i2c-2: IMX I2C adapter registered <6>[ 0.902549] i2c i2c-3: IMX I2C adapter registered <6>[ 0.906057] mc: Linux media interface: v0.10 <6>[ 0.909423] videodev: Linux video capture interface: v2.00 <6>[ 0.915980] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.920263] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.929862] PTP clock support registered <6>[ 0.936475] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.945321] Bluetooth: Core ver 2.22 <6>[ 0.946479] NET: Registered protocol family 31 <6>[ 0.951136] Bluetooth: HCI device and connection manager initialized <6>[ 0.957832] Bluetooth: HCI socket layer initialized <6>[ 0.962952] Bluetooth: L2CAP socket layer initialized <6>[ 0.968375] Bluetooth: SCO socket layer initialized <6>[ 0.976732] clocksource: Switched to clocksource arch_sys_counter <5>[ 2.683656] VFS: Disk quotas dquot_6.6.0 <6>[ 2.685246] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 2.740500] NET: Registered protocol family 2 <6>[ 2.743009] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 2.753920] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear) <6>[ 2.760640] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 2.768246] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear) <6>[ 2.777188] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 2.782897] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) <6>[ 2.789473] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) <6>[ 2.797363] NET: Registered protocol family 1 <6>[ 2.804053] RPC: Registered named UNIX socket transport module. <6>[ 2.807627] RPC: Registered udp transport module. <6>[ 2.812440] RPC: Registered tcp transport module. <6>[ 2.817498] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.826947] PCI: CLS 0 bytes, default 64 <6>[ 2.830086] Trying to unpack rootfs image as initramfs... <6>[ 4.234203] Freeing initrd memory: 9956K <6>[ 4.238293] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 4.252355] Initialise system trusted keyrings <6>[ 4.255427] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <5>[ 4.302792] NFS: Registering the id_resolver key type <5>[ 4.305445] Key type id_resolver registered <5>[ 4.309948] Key type id_legacy registered <6>[ 4.314597] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 4.321205] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 4.329019] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. <6>[ 4.338296] fuse: init (API version 7.32) <5>[ 4.460258] Key type asymmetric registered <5>[ 4.461903] Asymmetric key parser 'x509' registered <6>[ 4.467770] bounce: pool size: 64 pages <6>[ 4.471205] io scheduler mq-deadline registered <6>[ 4.475881] io scheduler kyber registered <4>[ 4.493786] pwm-backlight backlight: supply power not found, using dummy regulator <4>[ 4.528978] imx-sdma 30bd0000.sdma: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2 <4>[ 4.536074] imx-sdma 30bd0000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin <6>[ 4.553877] mxs-dma 33000000.dma-apbh: initialized <6>[ 4.572355] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1 <6>[ 4.577369] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 <6>[ 4.581511] pfuze100-regulator 0-0008: pfuze3000 found. <6>[ 4.625435] VLDO4: Bringing 3300000uV into 2800000-2800000uV <3>[ 4.636359] clk: failed to reparent uart1_src to pll_sys_main_240m_clk: -16 <6>[ 4.642512] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 58, base_baud = 1500000) is a IMX <6>[ 4.650924] printk: console [ttymxc0] enabled <6>[ 4.654490] printk: bootconsole [ec_imx6q0] disabled <6>[ 4.650924] printk: console [ttymxc0] enabled <6>[ 4.654490] printk: bootconsole [ec_imx6q0] disabled <6>[ 4.666199] 30a80000.serial: ttymxc5 at MMIO 0x30a80000 (irq = 67, base_baud = 15000000) is a IMX <6>[ 4.760158] brd: module loaded <6>[ 4.818273] loop: module loaded <6>[ 4.830521] gpio-expander@0 enforce active low on chipselect handle <6>[ 4.880380] CAN device driver interface <6>[ 4.899554] pps pps0: new PPS source ptp0 <6>[ 4.995173] fec 30be0000.ethernet eth0: registered PHC device 0 <6>[ 5.003541] pps pps1: new PPS source ptp1 <3>[ 5.008275] fec 30bf0000.ethernet: Invalid MAC address: 00:00:00:00:00:00 <6>[ 5.008364] fec 30bf0000.ethernet: Using random MAC address: 06:50:12:7e:76:c3 <6>[ 6.224596] fec 30bf0000.ethernet eth1: registered PHC device 1 <6>[ 6.229048] usbcore: registered new interface driver r8152 <6>[ 6.229269] usbcore: registered new interface driver lan78xx <6>[ 6.229528] usbcore: registered new interface driver asix <6>[ 6.229713] usbcore: registered new interface driver ax88179_178a <6>[ 6.229891] usbcore: registered new interface driver cdc_ether <6>[ 6.230151] usbcore: registered new interface driver smsc95xx <6>[ 6.230354] usbcore: registered new interface driver net1080 <6>[ 6.230551] usbcore: registered new interface driver cdc_subset <6>[ 6.230731] usbcore: registered new interface driver zaurus <6>[ 6.230911] usbcore: registered new interface driver MOSCHIP usb-ethernet driver <6>[ 6.231216] usbcore: registered new interface driver cdc_ncm <6>[ 6.231230] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 6.231243] ehci-pci: EHCI PCI platform driver <6>[ 6.231424] ehci-mxc: Freescale On-Chip EHCI Host driver <6>[ 6.232890] usbcore: registered new interface driver usb-storage <6>[ 6.247585] input: 30370000.snvs:snvs-powerkey as /devices/platform/soc/30000000.bus/30370000.snvs/30370000.snvs:snvs-powerkey/input/input0 <4>[ 6.252318] ads7846 spi2.0: supply vcc not found, using dummy regulator <6>[ 6.255676] ads7846 spi2.0: touchscreen, irq 145 <6>[ 6.259036] input: ADS7846 Touchscreen as /devices/platform/soc/30800000.bus/30800000.spba-bus/30840000.spi/spi_master/spi2/spi2.0/input/input1 <6>[ 6.277951] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc0 <6>[ 6.278067] snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) <6>[ 6.278777] i2c /dev entries driver <6>[ 6.299649] Bluetooth: HCI UART driver ver 2.3 <6>[ 6.299673] Bluetooth: HCI UART protocol H4 registered <6>[ 6.299810] Bluetooth: HCI UART protocol LL registered <3>[ 6.301178] CPUidle arm: CPU 0 failed to init idle CPU ops <6>[ 6.304543] sdhci: Secure Digital Host Controller Interface driver <6>[ 6.304552] sdhci: Copyright(c) Pierre Ossman <6>[ 6.304562] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 6.308538] sdhci-esdhc-imx 30b40000.mmc: Got CD GPIO <6>[ 6.308688] sdhci-esdhc-imx 30b40000.mmc: Got WP GPIO <6>[ 6.314753] caam 30900000.crypto: Entropy delay = 3200 <6>[ 6.374203] caam 30900000.crypto: Instantiated RNG4 SH0 <6>[ 6.433615] caam 30900000.crypto: Instantiated RNG4 SH1 <6>[ 6.456767] caam 30900000.crypto: device ID = 0x0a16030000000000 (Era 8) <6>[ 6.456793] caam 30900000.crypto: job rings = 3, qi = 0 <6>[ 6.482515] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA <6>[ 6.487191] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA <6>[ 6.519444] caam algorithms registered in /proc/crypto <6>[ 6.529524] caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto <6>[ 6.529616] caam 30900000.crypto: registering rng-caam <6>[ 6.531530] mmc0: new high speed SDHC card at address aaaa <6>[ 6.540810] mmcblk0: mmc0:aaaa SA16G 14.8 GiB <6>[ 6.552641] usbcore: registered new interface driver usbhid <6>[ 6.552658] usbhid: USB HID core driver <6>[ 6.565301] mmcblk0: p1 p2 <6>[ 6.694215] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA <5>[ 6.709343] random: crng init done <4>[ 6.737447] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) <6>[ 6.739382] NET: Registered protocol family 10 <4>[ 6.741416] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) <4>[ 6.745699] mmc1: queuing unknown CIS tuple 0x80 (6 bytes) <6>[ 6.748714] Segment Routing with IPv6 <6>[ 6.748919] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 6.754048] NET: Registered protocol family 17 <6>[ 6.754122] can: controller area network core <6>[ 6.754586] NET: Registered protocol family 29 <6>[ 6.754607] can: raw protocol <6>[ 6.754886] can: broadcast manager protocol <6>[ 6.754939] can: netlink gateway - max_hops=1 <5>[ 6.756194] Key type dns_resolver registered <6>[ 6.758576] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 2 mkt segment 0 supported-hw 0x4 0x1 <5>[ 6.781980] Registering SWP/SWPB emulation handler <6>[ 6.783813] printk: console [ttymxc0]: printing thread started <5>[ 6.783977] Loading compiled-in X.509 certificates <6>[ 7.000401] mmc1: new ultra high speed SDR104 SDIO card at address 0001 <6>[ 7.506036] vdd1p0d: supplied by SW2 <6>[ 7.518591] vdd1p2: supplied by SW2 <4>[ 7.532946] panel-simple panel: Specify missing connector_type <6>[ 7.559447] [drm] Initialized mxsfb-drm 1.0.0 20160824 for 30730000.lcdif on minor 0 <6>[ 7.619169] Console: switching to colour frame buffer device 60x34 <6>[ 7.636137] mxsfb 30730000.lcdif: [drm] fb0: mxsfb-drmdrmfb frame buffer device <4>[ 7.642926] imx_usb 30b10000.usb: No over current polarity defined <4>[ 7.792666] imx_usb 30b20000.usb: No over current polarity defined <6>[ 7.802052] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 7.802710] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 7.826767] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 7.828751] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 7.828768] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.828779] usb usb1: Product: EHCI Host Controller <6>[ 7.828788] usb usb1: Manufacturer: Linux 5.10.175-cip29-rt12 ehci_hcd <6>[ 7.828796] usb usb1: SerialNumber: ci_hdrc.1 <6>[ 7.834013] hub 1-0:1.0: USB hub found <6>[ 7.834379] hub 1-0:1.0: 1 port detected <6>[ 7.860000] imx_thermal 30360000.anatop:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C <4>[ 8.061250] usb_phy_generic usbphynop3: supply vcc not found, using dummy regulator <4>[ 8.062527] usb_phy_generic usbphynop3: dummy supplies not allowed for exclusive requests <6>[ 8.086337] imx6q-pcie 33800000.pcie: host bridge /soc/bus@30800000/pcie@33800000 ranges: <6>[ 8.086782] imx6q-pcie 33800000.pcie: IO 0x004ff80000..0x004ff8ffff -> 0x0000000000 <6>[ 8.087244] imx6q-pcie 33800000.pcie: MEM 0x0040000000..0x004fefffff -> 0x0040000000 <6>[ 8.094036] input: gpio-keys as /devices/platform/gpio-keys/input/input3 <6>[ 9.337409] imx6q-pcie 33800000.pcie: Phy link never came up <6>[ 9.338767] imx6q-pcie 33800000.pcie: PCI host bridge to bus 0000:00 <6>[ 9.338797] pci_bus 0000:00: root bus resource [bus 00-ff] <6>[ 9.338821] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] <6>[ 9.338839] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fefffff] <6>[ 9.339365] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400 <6>[ 9.339446] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff] <6>[ 9.339522] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] <6>[ 9.340019] pci 0000:00:00.0: supports D1 <6>[ 9.340031] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold <6>[ 9.345084] PCI: bus0: Fast back to back transfers disabled <6>[ 9.348789] PCI: bus1: Fast back to back transfers enabled <6>[ 9.361680] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x400fffff] <6>[ 9.361719] pci 0000:00:00.0: BAR 6: assigned [mem 0x40100000-0x4010ffff pref] <6>[ 9.361801] pci 0000:00:00.0: PCI bridge to [bus 01-ff] <6>[ 9.397406] Generic PHY 30be0000.ethernet-1:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) <6>[ 9.429057] Generic PHY 30be0000.ethernet-1:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=30be0000.ethernet-1:01, irq=POLL) <6>[ 13.548384] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 13.577033] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 13.608472] Sending DHCP requests .., OK <6>[ 16.386828] IP-Config: Got DHCP answer from 172.16.1.4, my address is 172.16.1.233 <6>[ 16.386852] IP-Config: Complete: <6>[ 16.386857] device=eth0, hwaddr=00:04:9f:05:b3:72, ipaddr=172.16.1.233, mask=255.255.255.0, gw=172.16.1.4 <6>[ 16.386873] host=172.16.1.233, domain=example.org, nis-domain=(none) <6>[ 16.386880] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= <6>[ 16.386889] nameserver0=172.16.1.4 <5>[ 16.421485] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 16.527835] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 16.532148] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <4>[ 16.532170] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db <6>[ 16.567517] ALSA device list: <6>[ 16.567541] #0: wm8960-audio <6>[ 16.572199] Freeing unused kernel memory: 1024K <6>[ 16.580076] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 17.081288] udevd[218]: starting version 3.2.9 <27>[ 17.105087] udevd[218]: specified user 'tss' unknown <27>[ 17.105337] udevd[218]: specified group 'tss' unknown <30>[ 17.139109] udevd[219]: starting eudev-3.2.9 <6>[ 19.597650] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 <4>[ 19.598246] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 <4>[ 19.598262] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac4339-sdio.bin done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1181723/environment . /lava-1181723/environment / # /lava-1181723/bin/lava-test-runner /lava-1181723/0 /lava-1181723/bin/lava-test-runner /lava-1181723/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1181723/0/tests/0_dmesg + cat uuid + UUID=1181723_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 26.899094] <8>[ 27.032034] <8>[ 27.148737] + set +x / # <8>[ 27.265697] <8>[ 27.26894# export SHELL=/bin/sh 3] # / # export SHELL=/bin/sh. /lava-1181723/environment / # . /lava-1181723/environment/lava-1181723/bin/lava-test-runner /lava-1181723/1 / # /lava-1181723/bin/lava-test-runner /lava-1181723/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1181723/1/tests/1_bootrr + cat uuid + UUID=1181723_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1181723/1/../bin:/sbin:/u<8>[ 33.150095] sr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1181723/1/../bin/lava-test-case <8>[ 33.309946] /lava-1181723/1/../bin/lava-test-case <8>[ 34.441810] /lava-1181723/1/../bin/lava-test-case <8>[ 34.501966] + set +x <8>[ 34.545097] / #