Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500) Trying to boot from MMC2 Loading Environment from EXT4... Card did not respond to voltage select! U-Boot 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500), Build: jenkins-github_Bootloader-Builder-131 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... Card did not respond to voltage select! Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.11.2 (4 ms) => setenv serverip 192.168.11.5 setenv serverip 192.168.11.5 => tftp 0x82000000 883694/tftp-deploy-66wo8car/kernel/zImage tftp 0x82000000 883694/tftp-deploy-66wo8car/kernel/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.2 Filename '883694/tftp-deploy-66wo8car/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 5.2 MiB/s done Bytes transferred = 4606728 (464b08 hex) => tftp 0x83000000 883694/tftp-deploy-66wo8car/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 883694/tftp-deploy-66wo8car/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.2 Filename '883694/tftp-deploy-66wo8car/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 5.2 MiB/s done Bytes transferred = 14165859 (d82763 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 883694/tftp-deploy-66wo8car/dtb/am335x-boneblack.dtb tftp 0x88000000 883694/tftp-deploy-66wo8car/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.2 Filename '883694/tftp-deploy-66wo8car/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *##### 4.6 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-03-22 13:32:34 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 14165795 Bytes = 13.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801256b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.175-cip29-rt12 (KernelCI@build-j1227232-arm-gcc-10-omap2plus-defconfig-7gbd5) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Mar 22 12:31:06 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] On node 0 totalpages: 130560 [ 0.000000] Normal zone: 1148 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 16 pages/cpu s33484 r8192 d23860 u65536 [ 0.000000] pcpu-alloc: s33484 r8192 d23860 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 472040K/522240K available (9216K kernel code, 1043K rwdata, 2176K rodata, 1024K init, 268K bss, 33816K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008337] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018549] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030220] Console: colour dummy device 80x30 <3>[ 0.035096] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042154] This ensures that you still see kernel messages. Please <3>[ 0.048880] update your kernel commandline. <6>[ 0.053481] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095555] pid_max: default: 32768 minimum: 301 <6>[ 0.100723] LSM: Security Framework initializing <6>[ 0.105836] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.113657] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.122951] CPU: Testing write buffer coherency: ok <6>[ 0.128317] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.134222] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.140723] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.147929] rcu: Hierarchical SRCU implementation. <6>[ 0.153746] smp: Bringing up secondary CPUs ... <6>[ 0.158682] smp: Brought up 1 node, 1 CPU <6>[ 0.163126] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.169867] CPU: All CPU(s) started in SVC mode. <6>[ 0.175624] devtmpfs: initialized <6>[ 0.191315] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.199839] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.210278] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.218894] pinctrl core: initialized pinctrl subsystem <6>[ 0.226452] NET: Registered protocol family 16 <6>[ 0.234090] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.260525] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.266610] audit: initializing netlink subsys (disabled) <6>[ 0.273690] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.273704] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.273708] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.273971] cpuidle: using governor menu <5>[ 1.161590] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1 <6>[ 1.286260] No ATAGs? <6>[ 1.288937] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.313320] Kprobes globally optimized <7>[ 1.323765] reg-fixed-voltage fixedregulator0: GPIO lookup for consumer (null) <7>[ 1.331623] reg-fixed-voltage fixedregulator0: using device tree for GPIO lookup <7>[ 1.339548] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator0[0]' <7>[ 1.348902] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator0[0]' <7>[ 1.358132] reg-fixed-voltage fixedregulator0: using lookup tables for GPIO lookup <7>[ 1.366205] reg-fixed-voltage fixedregulator0: No GPIO consumer (null) found <6>[ 1.376459] iommu: Default domain type: Translated <6>[ 1.383530] vgaarb: loaded <5>[ 1.387120] SCSI subsystem initialized <7>[ 1.391980] libata version 3.00 loaded. <6>[ 1.396744] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.402207] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.411926] PTP clock support registered <6>[ 1.417477] clocksource: Switched to clocksource dmtimer <5>[ 2.028634] VFS: Disk quotas dquot_6.6.0 <6>[ 2.033050] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 2.050016] NET: Registered protocol family 2 <6>[ 2.055097] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.063809] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.072771] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.081066] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.088748] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.095670] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.102704] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.110324] NET: Registered protocol family 1 <6>[ 2.116125] RPC: Registered named UNIX socket transport module. <6>[ 2.122587] RPC: Registered udp transport module. <6>[ 2.127716] RPC: Registered tcp transport module. <6>[ 2.132822] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.139750] PCI: CLS 0 bytes, default 64 <6>[ 2.144793] Trying to unpack rootfs image as initramfs... <6>[ 3.132281] Freeing initrd memory: 13836K <6>[ 3.138057] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.148466] Initialise system trusted keyrings <6>[ 3.153773] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 3.162032] NFS: Registering the id_resolver key type <5>[ 3.167634] Key type id_resolver registered <5>[ 3.172207] Key type id_legacy registered <6>[ 3.176652] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 3.184717] Key type asymmetric registered <5>[ 3.189266] Asymmetric key parser 'x509' registered <6>[ 3.194566] io scheduler mq-deadline registered <6>[ 3.199514] io scheduler kyber registered <3>[ 3.337159] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.345876] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.454342] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 3.496281] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 3.568043] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.576676] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 3.636467] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.645179] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 3.662638] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.671330] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 3.734719] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.743290] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 3.770575] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <7>[ 3.779489] gpio-clk clk_mcasp0: GPIO lookup for consumer enable <7>[ 3.785964] gpio-clk clk_mcasp0: using device tree for GPIO lookup <7>[ 3.792698] gpio-clk clk_mcasp0: No GPIO consumer enable found <6>[ 3.804640] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <7>[ 3.815414] omap8250 44e09000.serial: GPIO lookup for consumer rs485-term <7>[ 3.822832] omap8250 44e09000.serial: using device tree for GPIO lookup <7>[ 3.829953] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' <7>[ 3.845036] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' <7>[ 3.860021] omap8250 44e09000.serial: using lookup tables for GPIO lookup <7>[ 3.867277] omap8250 44e09000.serial: No GPIO consumer rs485-term found <6>[ 3.874409] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 3.883829] printk: console [ttyS0] enabled <6>[ 3.883829] printk: console [ttyS0] enabled <6>[ 3.892894] printk: bootconsole [omap8250] disabled <6>[ 3.892894] printk: bootconsole [omap8250] disabled <6>[ 3.916524] brd: module loaded <6>[ 3.928983] loop: module loaded <3>[ 3.934439] mtdoops: mtd device (mtddev=name/number) must be supplied <7>[ 3.943566] mdio_bus fixed-0: GPIO lookup for consumer reset <7>[ 3.949613] mdio_bus fixed-0: using lookup tables for GPIO lookup <7>[ 3.956000] mdio_bus fixed-0: No GPIO consumer reset found <7>[ 3.966236] mdio_bus 4a101000.mdio: GPIO lookup for consumer reset <7>[ 3.972841] mdio_bus 4a101000.mdio: using device tree for GPIO lookup <7>[ 3.979609] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' <7>[ 3.994681] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' <7>[ 4.009658] mdio_bus 4a101000.mdio: using lookup tables for GPIO lookup <7>[ 4.016566] mdio_bus 4a101000.mdio: No GPIO consumer reset found <6>[ 4.077471] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <3>[ 4.085709] mdio_bus 4a101000.mdio: MDIO device at address 0 is missing. <6>[ 4.093104] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 4.099809] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 4.105536] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) <6>[ 4.113071] cpsw 4a100000.ethernet: Detected MACID = 64:cf:d9:3f:a0:d5 <6>[ 4.122022] i2c /dev entries driver <5>[ 4.127592] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 4.135422] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.141994] sdhci: Copyright(c) Pierre Ossman <6>[ 4.147349] sdhci-pltfm: SDHCI platform and OF driver helper <7>[ 4.154923] sdhci-omap 48060000.mmc: GPIO lookup for consumer cd <7>[ 4.161332] sdhci-omap 48060000.mmc: using device tree for GPIO lookup <7>[ 4.168200] sdhci-omap 48060000.mmc: No GPIO consumer cd found <7>[ 4.175019] sdhci-omap 481d8000.mmc: GPIO lookup for consumer wp <7>[ 4.181406] sdhci-omap 481d8000.mmc: using device tree for GPIO lookup <7>[ 4.188271] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' <7>[ 4.202130] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' <7>[ 4.215905] sdhci-omap 481d8000.mmc: using lookup tables for GPIO lookup <7>[ 4.222922] sdhci-omap 481d8000.mmc: No GPIO consumer wp found <4>[ 4.229232] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.237765] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.246048] Initializing XFRM netlink socket <6>[ 4.250898] NET: Registered protocol family 10 <6>[ 4.257094] Segment Routing with IPv6 <6>[ 4.261230] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.268223] NET: Registered protocol family 17 <6>[ 4.272990] NET: Registered protocol family 15 <5>[ 4.277914] Key type dns_resolver registered <6>[ 4.283060] oprofile: using arm/armv7 <6>[ 4.287102] ThumbEE CPU extension supported. <5>[ 4.291744] Registering SWP/SWPB emulation handler <3>[ 4.297217] omap_voltage_late_init: Voltage driver support not added <3>[ 4.303948] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize <3>[ 4.312393] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize <6>[ 4.321069] SmartReflex Class3 initialized <6>[ 4.327882] printk: console [ttyS0]: printing thread started <5>[ 4.327975] Loading compiled-in X.509 certificates <6>[ 4.347606] OMAP GPIO hardware version 0.1 <6>[ 4.364117] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <4>[ 4.388162] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.395522] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.410261] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.411026] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.414810] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 4.419916] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.419927] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.420198] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.481569] mmc1: new high speed MMC card at address 0001 <6>[ 4.482663] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 4.483092] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 4.483495] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 4.483838] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (249:0) <6>[ 4.485895] mmcblk1: p1 <6>[ 4.490264] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.492739] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <3>[ 4.542755] cpsw 4a100000.ethernet: phy \"/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0\" not found on slave 0 <6>[ 24.557396] Waiting up to 100 more seconds for network. <6>[ 44.567395] Waiting up to 80 more seconds for network. <6>[ 64.577394] Waiting up to 60 more seconds for network. <6>[ 84.587395] Waiting up to 40 more seconds for network. <6>[ 104.597394] Waiting up to 20 more seconds for network. <5>[ 124.577418] Sending DHCP requests ...... timed out! <3>[ 202.859641] IP-Config: Reopening network devices... <6>[ 202.859698] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <3>[ 202.861559] cpsw 4a100000.ethernet: phy \"/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0\" not found on slave 0 <6>[ 222.877394] Waiting up to 100 more seconds for network. <6>[ 242.887394] Waiting up to 80 more seconds for network. <5>[ 253.097417] random: crng init done