[Enter `^Ec?' for help] U-Boot SPL 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45) U-Boot 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45 +0000) Model: Radxa Rock 2 Square DRAM: 2 GiB MMC: dwmmc@ff0c0000: 0, dwmmc@ff0f0000: 1 *** Warning - bad CRC, using default environment In: serial@ff690000 Out: serial@ff690000 Err: serial@ff690000 Incorrect eeprom header Net: Warning: ethernet@ff290000 (eth0) using random MAC address - 4a:25:f8:cd:b3:50 eth0: ethernet@ff290000 Hit any key to stop autoboot: 1  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp ethernet@ff290000 Waiting for PHY auto negotiation to complete...... done Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.201.186 (763 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x2000000 10371736/tftp-deploy-_945o757/kernel/zImage tftp 0x2000000 10371736/tftp-deploy-_945o757/kernel/zImage Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.186 Filename '10371736/tftp-deploy-_945o757/kernel/zImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############ 3.6 MiB/s done Bytes transferred = 9703936 (941200 hex) => tftp 0x4000000 10371736/tftp-deploy-_945o757/ramdisk/ramdisk.cpio.gz.uboot tftp 0x4000000 10371736/tftp-deploy-_945o757/ramdisk/ramdisk.cpio.gz.uboot Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.186 Filename '10371736/tftp-deploy-_945o757/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x4000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 3.6 MiB/s done Bytes transferred = 16063752 (f51d08 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x1f00000 10371736/tftp-deploy-_945o757/dtb/rk3288-rock2-square.dtb tftp 0x1f00000 10371736/tftp-deploy-_945o757/dtb/rk3288-rock2-square.dtb Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.186 Filename '10371736/tftp-deploy-_945o757/dtb/rk3288-rock2-square.dtb'. Load address: 0x1f00000 Loading: *### 3.1 MiB/s done Bytes transferred = 41652 (a2b4 hex) => setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x2000000 0x4000000 0x1f00000 bootz 0x2000000 0x4000000 0x1f00000 Kernel image @ 0x2000000 [ 0x000000 - 0x941200 ] ## Loading init Ramdisk from Legacy Image at 04000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 16063688 Bytes = 15.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Using Device Tree in place at 01f00000, end 01f0d2b3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x500 [ 0.000000] Linux version 5.10.179-cip32-rt12 (KernelCI@build-j1526252-arm-gcc-10-multi-v7-defconfig-x455d) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu May 18 10:43:42 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Radxa Rock 2 Square [ 0.000000] earlycon: uart0 at MMIO32 0xff690000 (options '115200n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] On node 0 totalpages: 524288 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 16 pages/cpu s33612 r8192 d23732 u65536 [ 0.000000] pcpu-alloc: s33612 r8192 d23732 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 1973028K/2097152K available (14336K kernel code, 2330K rwdata, 5348K rodata, 2048K init, 415K bss, 58588K reserved, 65536K cma-reserved, 1245184K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.009080] Switching to timer-based delay loop, resolution 41ns <6>[ 0.023209] Console: colour dummy device 80x30 <6>[ 0.028416] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.040083] pid_max: default: 32768 minimum: 301 <6>[ 0.045585] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.053920] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.063384] CPU: Testing write buffer coherency: ok <6>[ 0.069065] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.075137] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500 <6>[ 0.082553] Setting up static identity map for 0x300000 - 0x3000ac <6>[ 0.091737] rcu: Hierarchical SRCU implementation. <6>[ 0.102284] EFI services will not be available. <6>[ 0.107831] smp: Bringing up secondary CPUs ... <6>[ 0.114863] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501 <6>[ 0.121372] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.129093] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502 <6>[ 0.135601] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.143319] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503 <6>[ 0.149827] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.155805] smp: Brought up 1 node, 4 CPUs <6>[ 0.160594] SMP: Total of 4 processors activated (192.00 BogoMIPS). <6>[ 0.167784] CPU: All CPU(s) started in SVC mode. <6>[ 0.173756] devtmpfs: initialized <6>[ 0.187397] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0 <6>[ 0.196351] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.207454] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.217140] pinctrl core: initialized pinctrl subsystem <6>[ 0.225202] DMI not present or invalid. <6>[ 0.230537] NET: Registered protocol family 16 <6>[ 0.238153] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.248680] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.249207] cpuidle: using governor menu <6>[ 0.261253] No ATAGs? <6>[ 0.264166] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.273267] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.283455] Serial: AMBA PL011 UART driver <6>[ 0.389275] iommu: Default domain type: Translated <6>[ 0.396521] vgaarb: loaded <5>[ 0.400790] SCSI subsystem initialized <7>[ 0.405395] libata version 3.00 loaded. <6>[ 0.410170] usbcore: registered new interface driver usbfs <6>[ 0.416522] usbcore: registered new interface driver hub <6>[ 0.422692] usbcore: registered new device driver usb <6>[ 0.430420] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.436170] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.446520] PTP clock support registered <6>[ 0.454512] clocksource: Switched to clocksource arch_sys_counter <6>[ 1.821758] NET: Registered protocol family 2 <6>[ 1.827099] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 1.836955] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 1.846483] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 1.855379] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 1.863682] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 1.871060] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.878676] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.886910] NET: Registered protocol family 1 <6>[ 1.892569] RPC: Registered named UNIX socket transport module. <6>[ 1.899398] RPC: Registered udp transport module. <6>[ 1.904868] RPC: Registered tcp transport module. <6>[ 1.910320] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.917692] PCI: CLS 0 bytes, default 64 <6>[ 1.922696] Trying to unpack rootfs image as initramfs... <6>[ 3.480520] Freeing initrd memory: 15688K <6>[ 3.486050] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available <5>[ 3.496929] Initialise system trusted keyrings <6>[ 3.502344] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 3.516680] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.524154] NFS: Registering the id_resolver key type <5>[ 3.530048] Key type id_resolver registered <5>[ 3.534938] Key type id_legacy registered <6>[ 3.539733] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.547407] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.555865] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.561415] Key type asymmetric registered <5>[ 3.566234] Asymmetric key parser 'x509' registered <6>[ 3.571931] bounce: pool size: 64 pages <6>[ 3.576476] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.584898] io scheduler mq-deadline registered <6>[ 3.590154] io scheduler kyber registered <6>[ 3.635357] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 3.643964] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 <6>[ 3.655278] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 3.663882] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10 <6>[ 3.746365] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 3.756697] printk: console [ttyS2] disabled <6>[ 3.761739] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 43, base_baud = 1500000) is a 16550A <6>[ 3.772005] printk: console [ttyS2] enabled <6>[ 3.772005] printk: console [ttyS2] enabled <6>[ 3.781971] printk: bootconsole [uart0] disabled <6>[ 3.781971] printk: bootconsole [uart0] disabled <6>[ 3.795798] SuperH (H)SCI(F) driver initialized <6>[ 3.802637] msm_serial: driver initialized <6>[ 3.807796] STMicroelectronics ASC driver initialized <6>[ 3.815727] STM32 USART driver initialized <6>[ 3.840688] brd: module loaded <6>[ 3.852724] loop: module loaded <6>[ 3.872466] CAN device driver interface <6>[ 3.878426] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 3.886715] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 3.892558] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 3.899550] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 3.905892] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 3.916076] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 3.923394] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <3>[ 3.930448] rk_gmac-dwmac ff290000.ethernet: phy regulator is not available yet, deferred probing <6>[ 3.944125] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 3.952770] usbcore: registered new interface driver pegasus <6>[ 3.959480] usbcore: registered new interface driver asix <6>[ 3.965868] usbcore: registered new interface driver ax88179_178a <6>[ 3.973010] usbcore: registered new interface driver cdc_ether <6>[ 3.979883] usbcore: registered new interface driver smsc75xx <6>[ 3.986663] usbcore: registered new interface driver smsc95xx <6>[ 3.993425] usbcore: registered new interface driver net1080 <6>[ 4.000125] usbcore: registered new interface driver cdc_subset <6>[ 4.007093] usbcore: registered new interface driver zaurus <6>[ 4.013693] usbcore: registered new interface driver cdc_ncm <4>[ 4.023382] dwc2 ff540000.usb: supply vusb_d not found, using dummy regulator <4>[ 4.031840] dwc2 ff540000.usb: supply vusb_a not found, using dummy regulator <6>[ 4.104823] dwc2 ff540000.usb: DWC OTG Controller <6>[ 4.110400] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1 <6>[ 4.118637] dwc2 ff540000.usb: irq 48, io mem 0xff540000 <6>[ 4.125653] hub 1-0:1.0: USB hub found <6>[ 4.130181] hub 1-0:1.0: 1 port detected <4>[ 4.135726] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator <4>[ 4.144156] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator <6>[ 4.294550] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM <6>[ 4.303118] dwc2 ff580000.usb: DWC OTG Controller <6>[ 4.308730] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2 <6>[ 4.316952] dwc2 ff580000.usb: irq 49, io mem 0xff580000 <6>[ 4.323938] hub 2-0:1.0: USB hub found <6>[ 4.328491] hub 2-0:1.0: 1 port detected <6>[ 4.334826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 4.342424] ehci-pci: EHCI PCI platform driver <6>[ 4.347756] ehci-platform: EHCI generic platform driver <6>[ 4.354232] ehci-platform ff500000.usb: EHCI Host Controller <6>[ 4.360909] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3 <6>[ 4.370248] ehci-platform ff500000.usb: irq 47, io mem 0xff500000 <6>[ 4.404506] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00 <6>[ 4.412462] hub 3-0:1.0: USB hub found <6>[ 4.417017] hub 3-0:1.0: 1 port detected <6>[ 4.422376] ehci-orion: EHCI orion driver <6>[ 4.427421] SPEAr-ehci: EHCI SPEAr driver <6>[ 4.432390] ehci-st: EHCI STMicroelectronics driver <6>[ 4.438359] ehci-exynos: EHCI Exynos driver <6>[ 4.443515] ehci-atmel: EHCI Atmel driver <6>[ 4.448506] tegra-ehci: Tegra EHCI driver <6>[ 4.453504] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 4.460738] ohci-pci: OHCI PCI platform driver <6>[ 4.466068] ohci-platform: OHCI generic platform driver <6>[ 4.472447] SPEAr-ohci: OHCI SPEAr driver <6>[ 4.477433] ohci-st: OHCI STMicroelectronics driver <6>[ 4.483376] ohci-atmel: OHCI Atmel driver <6>[ 4.489320] usbcore: registered new interface driver usb-storage <6>[ 4.503988] i2c /dev entries driver <6>[ 4.514533] VCC_DDR: supplied by vcc_sys <6>[ 4.521525] VCC_IO: supplied by vcc_sys <6>[ 4.528420] VDD_LOG: Bringing 1100000uV into 1000000-1000000uV <6>[ 4.537647] VDD_LOG: supplied by vcc_sys <6>[ 4.544612] VCC_20: supplied by vcc_sys <6>[ 4.551503] VCCIO_SD: supplied by VCC_IO <6>[ 4.558991] VDD10_LCD: supplied by VCC_IO <6>[ 4.566943] VCCA_CODEC: supplied by VCC_IO <6>[ 4.574964] VCCA_TP: supplied by vcc_sys <6>[ 4.582302] VCCIO_PMU: supplied by vcc_sys <6>[ 4.589512] VDD_10: supplied by VCC_20 <6>[ 4.596808] VCC_18: supplied by VCC_20 <6>[ 4.604112] VCC18_LCD: supplied by VCC_20 <6>[ 4.613206] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! <6>[ 4.622619] vdd_cpu: supplied by vcc_sys <6>[ 4.629984] vcc_flash: supplied by VCC_IO <6>[ 4.635352] vcc_sd: supplied by VCC_IO <6>[ 4.642145] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! <6>[ 4.651558] vdd_gpu: supplied by vcc_sys <4>[ 4.675073] dw_wdt ff800000.watchdog: No valid TOPs array specified <6>[ 4.691547] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 500000 KHz, changing to: 600000 KHz <6>[ 4.705990] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.713191] sdhci: Copyright(c) Pierre Ossman <6>[ 4.719190] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.726687] dwmmc_rockchip ff0c0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.726756] dwmmc_rockchip ff0f0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.726806] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.726881] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.734890] dwmmc_rockchip ff0c0000.mmc: Using internal DMA controller. <6>[ 4.757808] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 4.757818] dwmmc_rockchip ff0f0000.mmc: Using internal DMA controller. <6>[ 4.765472] dwmmc_rockchip ff0c0000.mmc: Version ID is 270a <6>[ 4.773143] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 4.780829] dwmmc_rockchip ff0f0000.mmc: Version ID is 270a <6>[ 4.787348] dwmmc_rockchip ff0c0000.mmc: DW MMC controller at irq 38,32 bit host data width,256 deep fifo <6>[ 4.800363] dwmmc_rockchip ff0f0000.mmc: DW MMC controller at irq 40,32 bit host data width,256 deep fifo <6>[ 4.811342] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 4.822372] usb 3-1: new high-speed USB device number 2 using ehci-platform <6>[ 4.833350] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.843333] dwmmc_rockchip ff0f0000.mmc: allocated mmc-pwrseq <6>[ 4.848696] usbcore: registered new interface driver usbhid <6>[ 4.855062] mmc_host mmc1: card is non-removable. <6>[ 4.855856] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 4.861559] usbhid: USB HID core driver <6>[ 4.880446] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 4.884168] NET: Registered protocol family 10 <6>[ 4.898438] Segment Routing with IPv6 <6>[ 4.902844] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.909964] NET: Registered protocol family 17 <6>[ 4.915226] can: controller area network core <6>[ 4.920402] NET: Registered protocol family 29 <6>[ 4.925660] can: raw protocol <6>[ 4.929262] can: broadcast manager protocol <6>[ 4.934223] can: netlink gateway - max_hops=1 <5>[ 4.939540] Key type dns_resolver registered <6>[ 4.944642] ThumbEE CPU extension supported. <5>[ 4.949701] Registering SWP/SWPB emulation handler <6>[ 4.955495] printk: console [ttyS2]: printing thread started <5>[ 4.955505] Loading compiled-in X.509 certificates <6>[ 4.977509] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 4.977562] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <6>[ 4.978109] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input). <6>[ 4.978115] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30). <6>[ 4.978118] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10). <6>[ 4.978123] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no). <3>[ 4.978142] rk_gmac-dwmac ff290000.ethernet: cannot get clock clk_mac_speed <6>[ 4.978145] rk_gmac-dwmac ff290000.ethernet: clock input from PHY <6>[ 4.981566] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 4.982345] mmc1: new high speed MMC card at address 0001 <6>[ 4.982627] mmcblk1: mmc1:0001 032GE4 29.1 GiB <6>[ 4.982812] mmcblk1boot0: mmc1:0001 032GE4 partition 1 4.00 MiB <6>[ 4.983012] mmcblk1boot1: mmc1:0001 032GE4 partition 2 4.00 MiB <6>[ 4.983119] mmcblk1rpmb: mmc1:0001 032GE4 partition 3 4.00 MiB, chardev (235:0) <6>[ 4.983152] rk_gmac-dwmac ff290000.ethernet: init for RGMII <6>[ 4.983648] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35 <6>[ 4.983665] rk_gmac-dwmac ff290000.ethernet: DWMAC1000 <6>[ 4.983668] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported <6>[ 4.983671] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported <6>[ 4.983674] rk_gmac-dwmac ff290000.ethernet: COE Type 2 <6>[ 4.983677] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported <6>[ 4.983679] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported <6>[ 4.983714] rk_gmac-dwmac ff290000.ethernet: Normal descriptors <6>[ 4.983717] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled <6>[ 4.983720] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer <6>[ 4.983735] rk_gmac-dwmac ff290000.ethernet: device MAC address 7e:c3:d3:b1:a2:04 <6>[ 5.082737] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) <6>[ 5.082744] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) <3>[ 5.085844] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! <3>[ 5.085852] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! <3>[ 5.085855] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! <6>[ 5.085900] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 5.085992] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 5.085999] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 5.086014] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 5.086252] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 5.128249] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 5.128289] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 5.128294] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 5.128308] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 5.311443] mmcblk1: p1 p2 <6>[ 5.314423] rk_gmac-dwmac ff290000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) <6>[ 5.317002] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 5.317040] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 5.317049] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 5.317070] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 5.324486] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found <4>[ 5.324500] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW <6>[ 5.379719] rk_gmac-dwmac ff290000.ethernet eth0: configuring for phy/rgmii link mode <6>[ 5.406549] hub 3-1:1.0: USB hub found <6>[ 5.406921] hub 3-1:1.0: 4 ports detected <6>[ 5.413620] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 5.413694] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 5.413705] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 5.413728] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 8.475801] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 8.494719] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 8.524707] Sending DHCP requests .., OK <6>[ 14.714993] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.116 <6>[ 14.715055] IP-Config: Complete: <6>[ 14.715068] device=eth0, hwaddr=7e:c3:d3:b1:a2:04, ipaddr=192.168.201.116, mask=255.255.255.0, gw=192.168.201.1 <6>[ 14.715128] host=192.168.201.116, domain=lava-rack, nis-domain=(none) <6>[ 14.715156] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 14.715188] nameserver0=192.168.201.1 <4>[ 14.718306] dw-apb-uart ff690000.serial: forbid DMA for kernel console <6>[ 14.731412] Freeing unused kernel memory: 2048K <6>[ 14.825448] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 14.899761] udevd[121]: starting version 3.2.9 <5>[ 14.900362] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 14.900530] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 14.900615] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 14.906369] udevd[121]: specified user 'tss' unknown <27>[ 14.906467] udevd[121]: specified group 'tss' unknown <30>[ 14.907696] udevd[122]: starting eudev-3.2.9 <6>[ 15.073183] rockchip-vop ff930000.vop: Adding to iommu group 0 <6>[ 15.073445] rockchip-vop ff940000.vop: Adding to iommu group 1 <6>[ 15.091361] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 15.091604] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 15.091611] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 15.091628] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 15.126554] rk3288-crypto ff8a0000.crypto: will run requests pump with realtime priority <6>[ 15.127020] rk3288-crypto ff8a0000.crypto: Crypto Accelerator successfully registered <4>[ 15.128259] rtc-hym8563 0-0051: no valid clock/calendar values available <6>[ 15.135522] rtc-hym8563 0-0051: registered as rtc0 <6>[ 15.135553] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <4>[ 15.136650] rtc-hym8563 0-0051: no valid clock/calendar values available <3>[ 15.136657] rtc-hym8563 0-0051: hctosys: unable to read the hardware clock <6>[ 15.172403] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 15.172670] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 15.172795] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY) <6>[ 15.181221] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) <6>[ 15.181411] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 15.181644] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 <6>[ 15.273322] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 15.273331] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 15.273346] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 15.274551] dwmmc_rockchip ff0d0000.mmc: allocated mmc-pwrseq <6>[ 15.274559] mmc_host mmc2: card is non-removable. <6>[ 15.289867] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 15.304002] panfrost ffa30000.gpu: clock rate = 400000000 <6>[ 15.312632] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1 <6>[ 15.312642] panfrost ffa30000.gpu: features: 00000000,100277bf, issues: 00000000,24040400 done<6>[ 15.312647] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 <6>[ 15.312653] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1 <6>[ 15.314291] [drm] Initialized panfrost 1.1.0 20180908 for ffa30000.gpu on minor 1 <4>[ 15.335275] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) <4>[ 15.336981] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) <4>[ 15.338827] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) Saving random seed: OK <4>[ 15.341814] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) Starting network: ip: RTNETLINK answers: File exists FAIL <6>[ 15.526186] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) <6>[ 15.527838] mmc2: new high speed SDIO card at address 0001 <5>[ 15.543459] cfg80211: Loading compiled-in X.509 certificates for regulatory database Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # <5>[ 15.582332] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 15.582391] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 15.582397] cfg80211: failed to load regulatory.db <6>[ 15.596623] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 <4>[ 15.596707] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-10371736/environment . /lava-10371736/environment / # /lava-10371736/bin/lava-test-runner /lava-10371736/0 /lava-10371736/bin/lava-test-runner /lava-10371736/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-10371736/0/tests/0_dmesg + cat uuid <8>[ 16.141093] + UUID=10371736_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 16.162375] <8>[ 16.177063] <8>[ 16.191484] + set +x <8>[ 16.203916] / # # export SHELL=/bin/sh <6>[ 16.234528] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes # / # export SHELL=/bin/sh. /lava-10371736/environment / # . /lava-10371736/environment/lava-10371736/bin/lava-test-runner /lava-10371736/1 / # /lava-10371736/bin/lava-test-runner /lava-10371736/1<3>[ 16.612270] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 + export 'TESTRUN_ID=1_bootrr' + cd /lava-10371736/1/tests/1_bootrr + cat uuid + UUID=10371736_1.<8>[ 16.680377] 5.2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-10371736/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-10371736/1/../bin/lava-test-case <8>[ 16.708029] /lava-10371736/1/../bin/lava-test-case /lava-10371736/1/../bin/lava-test-case <8>[ 16.731454] <8>[ 16.739286] /lava-10371736/1/../bin/lava-test-case <8>[ 16.759313] /lava-10371736/1/../bin/lava-test-case /lava-10371736/1/../bin/lava-test-case <8>[ 16.778782] <8>[ 16.789251] /lava-10371736/1/../bin/lava-test-case /lava-10371736/1/../bin/lava-test-case <8>[ 16.817501] <8>[ 16.826427] /lava-10371736/1/../bin/lava-test-case + set +x