[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.127 (257 ms) U-Boot> setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 U-Boot> tftp 0x01000000 10402826/tftp-deploy-06266zwc/kernel/zImage tftp 0x01000000 10402826/tftp-deploy-06266zwc/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.127 Filename '10402826/tftp-deploy-06266zwc/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### 500 KiB/s done Bytes transferred = 5808512 (58a180 hex) U-Boot> tftp 0x02200000 10402826/tftp-deploy-06266zwc/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 10402826/tftp-deploy-06266zwc/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.127 Filename '10402826/tftp-deploy-06266zwc/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 905.3 KiB/s done Bytes transferred = 9261944 (8d5378 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 10402826/tftp-deploy-06266zwc/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 10402826/tftp-deploy-06266zwc/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.127 Filename '10402826/tftp-deploy-06266zwc/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 835 KiB/s done Bytes transferred = 13687 (3577 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x58a180 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9261880 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006676 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.180-cip33 (KernelCI@build-j1537832-arm-gcc-10-bcm2835-defconfig-ssz85) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Sun May 21 08:57:02 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:148 arm_dt_init_cpu_maps+0x1b8/0x200 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.180-cip33 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] Backtrace: [ 0.000000] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 0.000000] r7:c0e01edc r6:00000000 r5:00000009 r4:c0bbdd5d [ 0.000000] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 0.000000] [] (dump_stack) from [] (__warn+0x9c/0xdc) [ 0.000000] r5:00000009 r4:c0b34a54 [ 0.000000] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) [ 0.000000] r9:c0f75988 r8:c0b34acd r7:00000009 r6:c0d04d08 r5:00000094 r4:c0b34a54 [ 0.000000] [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x1b8/0x200) [ 0.000000] r8:c0b34a01 r7:00000000 r6:ff000000 r5:00000000 r4:eb9d96c4 [ 0.000000] [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x26c/0x644) [ 0.000000] r10:c0e01f70 r9:c0e01f68 r8:ebffff00 r7:c0bcb0c8 r6:2fffffff r5:c0e08738 [ 0.000000] r4:c0d34020 [ 0.000000] [] (setup_arch) from [] (start_kernel+0x64/0x520) [ 0.000000] r10:10c53c7d r9:410fc075 r8:00000100 r7:c0f8f03c r6:c0e04240 r5:00000051 [ 0.000000] r4:c0d004b0 [ 0.000000] [] (start_kernel) from [<00000000>] (0x0) [ 0.000000] r9:410fc075 r8:00000100 r7:00000000 r6:10c03c7d r5:00000051 r4:c0d004b0 [ 0.000000] ---[ end trace 58996bc4bee07162 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689060K/786432K available (8192K kernel code, 1595K rwdata, 3248K rodata, 1024K init, 710K bss, 31836K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 32704 entries in 96 pages <6>[ 0.000000] ftrace: allocated 96 pages with 2 groups <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000021] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008815] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018640] bcm2835: system timer (irq = 27) <6>[ 0.023780] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030268] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041540] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049967] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056765] Console: colour dummy device 80x30 <6>[ 0.061632] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072483] pid_max: default: 32768 minimum: 301 <6>[ 0.077830] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.085581] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.094780] CPU: Testing write buffer coherency: ok <6>[ 0.101172] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.109369] devtmpfs: initialized <6>[ 0.119246] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.127657] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.137990] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.148457] pinctrl core: initialized pinctrl subsystem <6>[ 0.156097] NET: Registered protocol family 16 <6>[ 0.163011] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.173689] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.174151] No ATAGs? <6>[ 0.183180] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.191605] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.198145] Serial: AMBA PL011 UART driver <6>[ 0.223716] Kprobes globally optimized <5>[ 0.233165] SCSI subsystem initialized <6>[ 0.237588] usbcore: registered new interface driver usbfs <6>[ 0.243587] usbcore: registered new interface driver hub <6>[ 0.249330] usbcore: registered new device driver usb <4>[ 0.255004] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.262640] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.270911] mc: Linux media interface: v0.10 <6>[ 0.275574] videodev: Linux video capture interface: v2.00 <6>[ 0.281719] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.288947] Bluetooth: Core ver 2.22 <6>[ 0.292955] NET: Registered protocol family 31 <6>[ 0.297757] Bluetooth: HCI device and connection manager initialized <6>[ 0.304525] Bluetooth: HCI socket layer initialized <6>[ 0.309770] Bluetooth: L2CAP socket layer initialized <6>[ 0.315210] Bluetooth: SCO socket layer initialized <6>[ 0.321009] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.570894] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes, mapped to 0x(ptrval) <6>[ 0.581890] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 0.595285] Console: switching to colour frame buffer device 82x26 <6>[ 0.604886] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 0.622557] NET: Registered protocol family 2 <6>[ 0.627771] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.637186] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.646074] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.654333] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.661971] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.668951] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.675917] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.683505] NET: Registered protocol family 1 <6>[ 0.688994] RPC: Registered named UNIX socket transport module. <6>[ 0.695337] RPC: Registered udp transport module. <6>[ 0.700395] RPC: Registered tcp transport module. <6>[ 0.705464] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.714260] Unpacking initramfs... <6>[ 1.512375] Freeing initrd memory: 9048K <6>[ 1.517806] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.528001] Initialise system trusted keyrings <6>[ 1.533236] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.550744] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <5>[ 1.679054] Key type asymmetric registered <5>[ 1.683664] Asymmetric key parser 'x509' registered <6>[ 1.688975] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>[ 1.696801] io scheduler mq-deadline registered <6>[ 1.701697] io scheduler kyber registered <6>[ 1.714557] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.726752] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.738097] usbcore: registered new interface driver zd1211rw <6>[ 1.744380] usbcore: registered new interface driver lan78xx <6>[ 1.750481] usbcore: registered new interface driver asix <6>[ 1.756328] usbcore: registered new interface driver ax88179_178a <6>[ 1.762870] usbcore: registered new interface driver cdc_ether <6>[ 1.769160] usbcore: registered new interface driver smsc95xx <6>[ 1.775349] usbcore: registered new interface driver net1080 <6>[ 1.781488] usbcore: registered new interface driver cdc_subset <6>[ 1.787831] usbcore: registered new interface driver zaurus <6>[ 1.793889] usbcore: registered new interface driver cdc_ncm <6>[ 1.800561] usbcore: registered new interface driver usb-storage <6>[ 1.807171] i2c /dev entries driver <4>[ 1.813408] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.822893] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.830071] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.836673] sdhci: Copyright(c) Pierre Ossman <6>[ 1.841703] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.848566] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.856088] usbcore: registered new interface driver usbhid <6>[ 1.862067] usbhid: USB HID core driver <6>[ 1.866411] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.874458] NET: Registered protocol family 10 <6>[ 1.880634] Segment Routing with IPv6 <6>[ 1.884837] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.892046] NET: Registered protocol family 17 <6>[ 1.897414] oprofile: using timer interrupt. <5>[ 1.902524] Loading compiled-in X.509 certificates <6>[ 1.914237] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.923751] printk: console [ttyAMA0] enabled <6>[ 1.923751] printk: console [ttyAMA0] enabled <6>[ 1.933094] printk: bootconsole [pl11] disabled <6>[ 1.933094] printk: bootconsole [pl11] disabled <6>[ 1.946829] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.958304] ------------[ cut here ]------------ <4>[ 1.963254] WARNING: CPU: 0 PID: 44 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xf8/0x2f0 <4>[ 1.972485] Modules linked in: <4>[ 1.975813] CPU: 0 PID: 44 Comm: kworker/0:2 Tainted: G W 5.10.180-cip33 #1 <4>[ 1.984333] Hardware name: BCM2835 <4>[ 1.988012] Workqueue: events deferred_probe_work_func <4>[ 1.993417] Backtrace: <4>[ 1.996139] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 2.003972] r7:00000000 r6:00000000 r5:00000009 r4:c0bbdd5d <4>[ 2.009893] [] (show_stack) from [] (dump_stack+0x28/0x30) <4>[ 2.017391] [] (dump_stack) from [] (__warn+0x9c/0xdc) <4>[ 2.024527] r5:00000009 r4:c0ba68ed <4>[ 2.028366] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) <4>[ 2.036115] r9:c470bbc8 r8:00000000 r7:00000009 r6:c062e63c r5:0000004f r4:c0ba68ed <4>[ 2.044125] [] (warn_slowpath_fmt) from [] (dt_cpufreq_probe+0xf8/0x2f0) <4>[ 2.052825] r8:00000000 r7:c470aa10 r6:c470bbc0 r5:c0e08868 r4:00000000 <4>[ 2.059787] [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.068507] r10:00000003 r9:c103178c r8:00000000 r7:c1031784 r6:c0f35e24 r5:c470aa10 <4>[ 2.076594] r4:00000000 <4>[ 2.079394] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.087920] r7:c1031784 r6:c0f35e24 r5:00000000 r4:c470aa10 <4>[ 2.093853] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.102469] r10:00000003 r9:00000000 r8:c0f25548 r7:c470aa10 r6:c46bd7fc r5:c0f35e24 <4>[ 2.110545] r4:c470aa10 <4>[ 2.113360] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.122667] r8:c0f25548 r7:c470aa10 r6:c46bd7fc r5:c0f35e24 r4:00000001 <4>[ 2.129628] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.138673] r7:c470aa54 r6:c051dafc r5:c46bd7fc r4:00000000 <4>[ 2.144604] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.153128] r6:c470aa10 r5:00000001 r4:c470aa10 <4>[ 2.158009] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.166794] r7:00000000 r6:c470aa10 r5:c0f254f0 r4:c470aa10 <4>[ 2.172743] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.181623] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.189791] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470aa10 <4>[ 2.195721] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.204163] r9:c0e0b434 r8:c0e0b414 r7:05f5e100 r6:00000000 r5:00000000 r4:c470aa00 <4>[ 2.212172] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.222175] r9:05f5e0ff r8:2faf0800 r7:05f5e100 r6:c46bd8e0 r5:00000000 r4:c470aa00 <4>[ 2.230176] [] (platform_device_register_full) from [] (raspberrypi_cpufreq_probe+0x10c/0x198) <4>[ 2.240781] r7:05f5e100 r6:c0e08868 r5:00000000 r4:00000000 <4>[ 2.246712] [] (raspberrypi_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.256200] r9:c103178c r8:00000000 r7:c1031784 r6:c0f35f1c r5:c470a610 r4:00000000 <4>[ 2.264212] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.272742] r7:c1031784 r6:c0f35f1c r5:00000000 r4:c470a610 <4>[ 2.278662] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.287282] r10:c470b2c0 r9:00000000 r8:c470a410 r7:c470a610 r6:c46bda2c r5:c0f35f1c <4>[ 2.295380] r4:c470a610 <4>[ 2.298182] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.307490] r8:c470a410 r7:c470a610 r6:c46bda2c r5:c0f35f1c r4:00000001 <4>[ 2.314461] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.323507] r7:c470a654 r6:c051dafc r5:c46bda2c r4:00000000 <4>[ 2.329427] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.337951] r6:c470a610 r5:00000001 r4:c470a610 <4>[ 2.342842] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.351627] r7:00000000 r6:c470a610 r5:c0f254f0 r4:c470a610 <4>[ 2.357548] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.366426] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.374605] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470a610 <4>[ 2.380523] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.388965] r9:c0e0b434 r8:c0e0b414 r7:00000000 r6:00000000 r5:00000000 r4:c470a600 <4>[ 2.396979] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.406982] r9:c470a410 r8:c4705150 r7:00000000 r6:c46bdb18 r5:00000000 r4:c470a600 <4>[ 2.414999] [] (platform_device_register_full) from [] (raspberrypi_clk_probe+0x160/0x31c) <4>[ 2.425258] r7:00000000 r6:00000000 r5:c470b240 r4:00000000 <4>[ 2.431188] [] (raspberrypi_clk_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.440313] r10:00000003 r9:c103178c r8:00000000 r7:c1031784 r6:c0f1f68c r5:c470a410 <4>[ 2.448399] r4:00000000 <4>[ 2.451208] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.459723] r7:c1031784 r6:c0f1f68c r5:00000000 r4:c470a410 <4>[ 2.465654] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.474269] r10:00000003 r9:00000000 r8:c1594c10 r7:c470a410 r6:c46bdc6c r5:c0f1f68c <4>[ 2.482360] r4:c470a410 <4>[ 2.485161] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.494469] r8:c1594c10 r7:c470a410 r6:c46bdc6c r5:c0f1f68c r4:00000001 <4>[ 2.501444] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.510479] r7:c470a454 r6:c051dafc r5:c46bdc6c r4:00000000 <4>[ 2.516411] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.524934] r6:c470a410 r5:00000001 r4:c470a410 <4>[ 2.529816] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.538601] r7:00000000 r6:c470a410 r5:c0f254f0 r4:c470a410 <4>[ 2.544532] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.553409] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.561587] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470a410 <4>[ 2.567506] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.575947] r9:c0e0b434 r8:c0e0b414 r7:c1594c00 r6:00000000 r5:00000000 r4:c470a400 <4>[ 2.583956] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.593958] r9:c103178c r8:00000001 r7:c1594c00 r6:c46bdd58 r5:00000000 r4:c470a400 <4>[ 2.601973] [] (platform_device_register_full) from [] (rpi_firmware_probe+0x1a4/0x1ec) <4>[ 2.611976] r7:c1594c00 r6:c1594c10 r5:c4709300 r4:00000000 <4>[ 2.617896] [] (rpi_firmware_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.626770] r8:00000000 r7:c1031784 r6:c0f3783c r5:c1594c10 r4:00000000 <4>[ 2.633741] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.642266] r7:c1031784 r6:c0f3783c r5:00000000 r4:c1594c10 <4>[ 2.648187] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.656802] r10:c0f25444 r9:00000000 r8:00000000 r7:c1594c10 r6:c46bdea4 r5:c0f3783c <4>[ 2.664888] r4:c1594c10 <4>[ 2.667689] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.676996] r8:00000000 r7:c1594c10 r6:c46bdea4 r5:c0f3783c r4:00000001 <4>[ 2.683968] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.693016] r7:c1594c54 r6:c051dafc r5:c46bdea4 r4:00000000 <4>[ 2.698936] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.707461] r6:c1594c10 r5:00000001 r4:c1594c10 <4>[ 2.712352] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.721142] r7:eb9c7300 r6:c1594c10 r5:c0f254f0 r4:c1594c10 <4>[ 2.727062] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.735941] [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xcc) <4>[ 2.745161] r7:eb9c7300 r6:c0f25468 r5:c0f2542c r4:c1594c10 <4>[ 2.751094] [] (deferred_probe_work_func) from [] (process_one_work+0x194/0x274) <4>[ 2.760475] r7:eb9c7300 r6:c0e0d18c r5:c0f25440 r4:c46a1c80 <4>[ 2.766403] [] (process_one_work) from [] (worker_thread+0x220/0x2e4) <4>[ 2.774846] r10:c46a77a0 r9:c0f8fabc r8:c0e0d1a0 r7:c0edcaa0 r6:c0e0d18c r5:c46a1c94 <4>[ 2.782932] r4:c46a1c80 <4>[ 2.785736] [] (worker_thread) from [] (kthread+0x11c/0x128) <4>[ 2.793398] r9:c1531e98 r8:c46a1c80 r7:c0134f3c r6:c46bc000 r5:c469fcc0 r4:c46a7780 <4>[ 2.801411] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 2.808883] Exception stack(0xc46bdfb0 to 0xc46bdff8) <4>[ 2.814200] dfa0: 00000000 00000000 00000000 00000000 <4>[ 2.822640] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.831082] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.837952] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0139a40 <4>[ 2.846039] r4:c469fcc0 r3:00000001 <4>[ 2.849869] ---[ end trace 58996bc4bee07164 ]--- <6>[ 2.854835] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 2.863890] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.871541] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.931780] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.936781] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.944326] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.951091] hub 1-0:1.0: USB hub found <6>[ 2.955178] hub 1-0:1.0: 1 port detected <4>[ 2.961291] vc4_hdmi 3f902000.hdmi: deferred probe timeout, ignoring dependency <4>[ 2.968954] vc4_hdmi: probe of 3f902000.hdmi failed with error -110 <4>[ 2.975831] vc4_vec 3f806000.vec: deferred probe timeout, ignoring dependency <4>[ 2.983305] vc4_vec: probe of 3f806000.vec failed with error -110 <4>[ 2.989891] vc4_v3d 3fc00000.v3d: deferred probe timeout, ignoring dependency <4>[ 2.997358] vc4_v3d: probe of 3fc00000.v3d failed with error -110 <4>[ 3.004720] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <4>[ 3.036854] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 3.047450] mmc0: new high speed SDHC card at address 0002 <6>[ 3.054307] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 3.061876] mmcblk0: p1 <6>[ 3.341033] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.592107] hub 1-1:1.0: USB hub found <6>[ 3.596230] hub 1-1:1.0: 5 ports detected <6>[ 3.921036] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 4.054321] smsc95xx v2.0.0 <6>[ 4.184625] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 4.197058] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.265298] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 4.288726] smsc95xx 1-1.1:1.0 eth0: Link is Down <6>[ 4.301046] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.437235] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.444849] scsi host0: usb-storage 1-1.3:1.0 <5>[ 5.540578] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.891052] random: crng init done <5>[ 6.482247] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.490462] sd 0:0:0:0: [sda] Write Protect is off <3>[ 6.496094] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 6.501716] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 6.540786] sda: sda1 sda2 <5>[ 6.547738] sd 0:0:0:0: [sda] Attached SCSI removable disk <6>[ 7.382634] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.391193] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.421207] Sending DHCP requests ., OK <6>[ 7.465145] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.127 <6>[ 7.473533] IP-Config: Complete: <6>[ 7.477042] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.201.127, mask=255.255.255.0, gw=192.168.201.1 <6>[ 7.487852] host=192.168.201.127, domain=lava-rack, nis-domain=(none) <6>[ 7.495018] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 7.495026] nameserver0=192.168.201.1 <5>[ 7.507372] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 7.537294] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 7.544640] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 7.553873] ALSA device list: <6>[ 7.557141] No soundcards found. <6>[ 7.561049] cfg80211: failed to load regulatory.db <6>[ 7.566381] uart-pl011 3f201000.serial: no DMA platform data <6>[ 7.579130] Freeing unused kernel memory: 1024K <6>[ 7.584331] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.814837] udevd[93]: starting version 3.2.9 <27>[ 7.833846] udevd[93]: specified user 'tss' unknown <27>[ 7.839368] udevd[93]: specified group 'tss' unknown <30>[ 7.850610] udevd[94]: starting eudev-3.2.9 <4>[ 8.205812] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 8.307184] bcm2835-rng 3f104000.rng: hwrng registered <3>[ 8.341761] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 8.348531] vchiq: could not load vchiq done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-10402826/environment . /lava-10402826/environment / # /lava-10402826/bin/lava-test-runner /lava-10402826/0 /lava-10402826/bin/lava-test-runner /lava-10402826/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-10402826/0/tests/0_dmesg + cat uuid + UUID=10402826_1.5.<8>[ 9.653685] 2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 9.719003] <8>[ 9.779390] <8>[ 9.840398] + set +x <8>[ 9.852132] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-10402826/environment / # . /lava-10402826/environment/lava-10402826/bin/lava-test-runner /lava-10402826/1 / # /lava-10402826/bin/lava-test-runner /lava-10402826/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-10402826/1/tests/1_bootrr + cat uuid + UUID=10402826_1.5.<8>[ 10.375855] 2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-10402826/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-10402826/1/../bin/lava-test-case <8>[ 10.450398] /lava-10402826/1/../bin/lava-test-case <8>[ 10.506106] /lava-10402826/1/../bin/lava-test-case <8>[ 10.538964] + set +x <8>[ 10.564479] / #