[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.14 (259 ms) U-Boot> setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 U-Boot> tftp 0x01000000 11125231/tftp-deploy-n0ht972h/kernel/zImage tftp 0x01000000 11125231/tftp-deploy-n0ht972h/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11125231/tftp-deploy-n0ht972h/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### 476.6 KiB/s done Bytes transferred = 5811400 (58acc8 hex) U-Boot> tftp 0x02200000 11125231/tftp-deploy-n0ht972h/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 11125231/tftp-deploy-n0ht972h/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11125231/tftp-deploy-n0ht972h/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 838.9 KiB/s done Bytes transferred = 9261302 (8d50f6 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 11125231/tftp-deploy-n0ht972h/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 11125231/tftp-deploy-n0ht972h/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11125231/tftp-deploy-n0ht972h/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 742.2 KiB/s done Bytes transferred = 13687 (3577 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x58acc8 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9261238 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006676 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.186-cip37 (KernelCI@build-j9421-arm-gcc-10-bcm2835-defconfig-4qvxk) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Sat Jul 22 12:52:24 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:148 arm_dt_init_cpu_maps+0x1b8/0x200 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.186-cip37 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] Backtrace: [ 0.000000] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 0.000000] r7:c0e01edc r6:00000000 r5:00000009 r4:c0bbe17e [ 0.000000] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 0.000000] [] (dump_stack) from [] (__warn+0x9c/0xdc) [ 0.000000] r5:00000009 r4:c0b34c70 [ 0.000000] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) [ 0.000000] r9:c0f75988 r8:c0b34ce9 r7:00000009 r6:c0d04d08 r5:00000094 r4:c0b34c70 [ 0.000000] [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x1b8/0x200) [ 0.000000] r8:c0b34c1d r7:00000000 r6:ff000000 r5:00000000 r4:eb9d96c4 [ 0.000000] [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x26c/0x644) [ 0.000000] r10:c0e01f70 r9:c0e01f68 r8:ebffff00 r7:c0bcc0c8 r6:2fffffff r5:c0e08738 [ 0.000000] r4:c0d340ec [ 0.000000] [] (setup_arch) from [] (start_kernel+0x64/0x520) [ 0.000000] r10:10c53c7d r9:410fc075 r8:00000100 r7:c0f8f03c r6:c0e04240 r5:00000051 [ 0.000000] r4:c0d004b0 [ 0.000000] [] (start_kernel) from [<00000000>] (0x0) [ 0.000000] r9:410fc075 r8:00000100 r7:00000000 r6:10c03c7d r5:00000051 r4:c0d004b0 [ 0.000000] ---[ end trace 58996bc4bee07162 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689060K/786432K available (8192K kernel code, 1595K rwdata, 3252K rodata, 1024K init, 710K bss, 31836K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 32719 entries in 96 pages <6>[ 0.000000] ftrace: allocated 96 pages with 2 groups <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000019] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008818] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018641] bcm2835: system timer (irq = 27) <6>[ 0.023756] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030250] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041516] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049951] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056751] Console: colour dummy device 80x30 <6>[ 0.061617] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072467] pid_max: default: 32768 minimum: 301 <6>[ 0.077811] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.085564] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.094746] CPU: Testing write buffer coherency: ok <6>[ 0.101122] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.109331] devtmpfs: initialized <6>[ 0.118958] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.127363] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.137691] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.148138] pinctrl core: initialized pinctrl subsystem <6>[ 0.155749] NET: Registered protocol family 16 <6>[ 0.162712] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.173389] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.173909] No ATAGs? <6>[ 0.182940] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.191367] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.197903] Serial: AMBA PL011 UART driver <6>[ 0.223193] Kprobes globally optimized <5>[ 0.232658] SCSI subsystem initialized <6>[ 0.237069] usbcore: registered new interface driver usbfs <6>[ 0.243063] usbcore: registered new interface driver hub <6>[ 0.248799] usbcore: registered new device driver usb <4>[ 0.254475] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.262118] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.270380] mc: Linux media interface: v0.10 <6>[ 0.275046] videodev: Linux video capture interface: v2.00 <6>[ 0.281194] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.288418] Bluetooth: Core ver 2.22 <6>[ 0.292427] NET: Registered protocol family 31 <6>[ 0.297225] Bluetooth: HCI device and connection manager initialized <6>[ 0.303997] Bluetooth: HCI socket layer initialized <6>[ 0.309238] Bluetooth: L2CAP socket layer initialized <6>[ 0.314681] Bluetooth: SCO socket layer initialized <6>[ 0.320514] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.571426] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes, mapped to 0x(ptrval) <6>[ 0.582417] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 0.595801] Console: switching to colour frame buffer device 82x26 <6>[ 0.605414] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 0.623139] NET: Registered protocol family 2 <6>[ 0.628350] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.637769] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.646657] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.654919] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.662558] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.669529] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.676496] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.684079] NET: Registered protocol family 1 <6>[ 0.689558] RPC: Registered named UNIX socket transport module. <6>[ 0.695895] RPC: Registered udp transport module. <6>[ 0.700966] RPC: Registered tcp transport module. <6>[ 0.706025] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.714813] Unpacking initramfs... <6>[ 1.511830] Freeing initrd memory: 9048K <6>[ 1.517287] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.527432] Initialise system trusted keyrings <6>[ 1.532632] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.549981] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <5>[ 1.675790] Key type asymmetric registered <5>[ 1.680240] Asymmetric key parser 'x509' registered <6>[ 1.685721] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>[ 1.693550] io scheduler mq-deadline registered <6>[ 1.698440] io scheduler kyber registered <6>[ 1.711240] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.723472] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.734808] usbcore: registered new interface driver zd1211rw <6>[ 1.741081] usbcore: registered new interface driver lan78xx <6>[ 1.747181] usbcore: registered new interface driver asix <6>[ 1.753035] usbcore: registered new interface driver ax88179_178a <6>[ 1.759556] usbcore: registered new interface driver cdc_ether <6>[ 1.765859] usbcore: registered new interface driver smsc95xx <6>[ 1.772043] usbcore: registered new interface driver net1080 <6>[ 1.778123] usbcore: registered new interface driver cdc_subset <6>[ 1.784534] usbcore: registered new interface driver zaurus <6>[ 1.790591] usbcore: registered new interface driver cdc_ncm <6>[ 1.797268] usbcore: registered new interface driver usb-storage <6>[ 1.803877] i2c /dev entries driver <4>[ 1.810175] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.819828] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.827027] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.833620] sdhci: Copyright(c) Pierre Ossman <6>[ 1.838608] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.846052] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.853052] usbcore: registered new interface driver usbhid <6>[ 1.859000] usbhid: USB HID core driver <6>[ 1.863368] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.871415] NET: Registered protocol family 10 <6>[ 1.877587] Segment Routing with IPv6 <6>[ 1.881805] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.888968] NET: Registered protocol family 17 <6>[ 1.894369] oprofile: using timer interrupt. <5>[ 1.899489] Loading compiled-in X.509 certificates <6>[ 1.911256] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.921395] printk: console [ttyAMA0] enabled <6>[ 1.921395] printk: console [ttyAMA0] enabled <6>[ 1.930737] printk: bootconsole [pl11] disabled <6>[ 1.930737] printk: bootconsole [pl11] disabled <6>[ 1.943610] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <6>[ 1.952385] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 1.961946] ------------[ cut here ]------------ <4>[ 1.966862] WARNING: CPU: 0 PID: 46 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xf8/0x2f0 <4>[ 1.976096] Modules linked in: <4>[ 1.979425] CPU: 0 PID: 46 Comm: kworker/0:3 Tainted: G W 5.10.186-cip37 #1 <4>[ 1.987951] Hardware name: BCM2835 <4>[ 1.991651] Workqueue: events deferred_probe_work_func <4>[ 1.997044] Backtrace: <4>[ 1.999766] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 2.007601] r7:00000000 r6:00000000 r5:00000009 r4:c0bbe17e <4>[ 2.013533] [] (show_stack) from [] (dump_stack+0x28/0x30) <4>[ 2.021031] [] (dump_stack) from [] (__warn+0x9c/0xdc) <4>[ 2.028156] r5:00000009 r4:c0ba6d0e <4>[ 2.032006] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) <4>[ 2.039744] r9:c470bbc8 r8:00000000 r7:00000009 r6:c062f5b4 r5:0000004f r4:c0ba6d0e <4>[ 2.047755] [] (warn_slowpath_fmt) from [] (dt_cpufreq_probe+0xf8/0x2f0) <4>[ 2.056457] r8:00000000 r7:c470ca10 r6:c470bbc0 r5:c0e08868 r4:00000000 <4>[ 2.063444] [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.072149] r10:00000004 r9:c103178c r8:00000000 r7:c1031784 r6:c0f35e2c r5:c470ca10 <4>[ 2.080224] r4:00000000 <4>[ 2.083034] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.091561] r7:c1031784 r6:c0f35e2c r5:00000000 r4:c470ca10 <4>[ 2.097482] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.106101] r10:00000004 r9:00000000 r8:c0f25548 r7:c470ca10 r6:c46eb7fc r5:c0f35e2c <4>[ 2.114193] r4:c470ca10 <4>[ 2.116995] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.126303] r8:c0f25548 r7:c470ca10 r6:c46eb7fc r5:c0f35e2c r4:00000001 <4>[ 2.133276] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.142321] r7:c470ca54 r6:c051e3e4 r5:c46eb7fc r4:00000000 <4>[ 2.148242] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.156765] r6:c470ca10 r5:00000001 r4:c470ca10 <4>[ 2.161658] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.170432] r7:00000000 r6:c470ca10 r5:c0f254f0 r4:c470ca10 <4>[ 2.176380] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.185261] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.193440] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470ca10 <4>[ 2.199360] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.207802] r9:c0e0b420 r8:c0e0b400 r7:05f5e100 r6:00000000 r5:00000000 r4:c470ca00 <4>[ 2.215816] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.225820] r9:05f5e0ff r8:2faf0800 r7:05f5e100 r6:c46eb8e0 r5:00000000 r4:c470ca00 <4>[ 2.233833] [] (platform_device_register_full) from [] (raspberrypi_cpufreq_probe+0x10c/0x198) <4>[ 2.244439] r7:05f5e100 r6:c0e08868 r5:00000000 r4:00000000 <4>[ 2.250359] [] (raspberrypi_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.259846] r9:c103178c r8:00000000 r7:c1031784 r6:c0f35f24 r5:c470c610 r4:00000000 <4>[ 2.267858] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.276387] r7:c1031784 r6:c0f35f24 r5:00000000 r4:c470c610 <4>[ 2.282326] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.290953] r10:c470b2c0 r9:00000000 r8:c470c410 r7:c470c610 r6:c46eba2c r5:c0f35f24 <4>[ 2.299029] r4:c470c610 <4>[ 2.301842] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.311150] r8:c470c410 r7:c470c610 r6:c46eba2c r5:c0f35f24 r4:00000001 <4>[ 2.318111] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.327161] r7:c470c654 r6:c051e3e4 r5:c46eba2c r4:00000000 <4>[ 2.333094] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.341619] r6:c470c610 r5:00000001 r4:c470c610 <4>[ 2.346500] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.355286] r7:00000000 r6:c470c610 r5:c0f254f0 r4:c470c610 <4>[ 2.361218] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.370085] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.378264] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470c610 <4>[ 2.384194] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.392640] r9:c0e0b420 r8:c0e0b400 r7:00000000 r6:00000000 r5:00000000 r4:c470c600 <4>[ 2.400652] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.410655] r9:c470c410 r8:c4706150 r7:00000000 r6:c46ebb18 r5:00000000 r4:c470c600 <4>[ 2.418660] [] (platform_device_register_full) from [] (raspberrypi_clk_probe+0x160/0x31c) <4>[ 2.428919] r7:00000000 r6:00000000 r5:c470b240 r4:00000000 <4>[ 2.434853] [] (raspberrypi_clk_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.443990] r10:00000004 r9:c103178c r8:00000000 r7:c1031784 r6:c0f1f68c r5:c470c410 <4>[ 2.452076] r4:00000000 <4>[ 2.454875] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.463400] r7:c1031784 r6:c0f1f68c r5:00000000 r4:c470c410 <4>[ 2.469322] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.477937] r10:00000003 r9:00000000 r8:c1594c10 r7:c470c410 r6:c46ebc6c r5:c0f1f68c <4>[ 2.486028] r4:c470c410 <4>[ 2.488830] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.498138] r8:c1594c10 r7:c470c410 r6:c46ebc6c r5:c0f1f68c r4:00000001 <4>[ 2.505115] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.514162] r7:c470c454 r6:c051e3e4 r5:c46ebc6c r4:00000000 <4>[ 2.520083] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.528608] r6:c470c410 r5:00000001 r4:c470c410 <4>[ 2.533499] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.542288] r7:00000000 r6:c470c410 r5:c0f254f0 r4:c470c410 <4>[ 2.548210] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.557089] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.565269] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470c410 <4>[ 2.571198] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.579629] r9:c0e0b420 r8:c0e0b400 r7:c1594c00 r6:00000000 r5:00000000 r4:c470c400 <4>[ 2.587641] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.597643] r9:c103178c r8:00000001 r7:c1594c00 r6:c46ebd58 r5:00000000 r4:c470c400 <4>[ 2.605659] [] (platform_device_register_full) from [] (rpi_firmware_probe+0x1a4/0x1ec) <4>[ 2.615663] r7:c1594c00 r6:c1594c10 r5:c470a5c0 r4:00000000 <4>[ 2.621594] [] (rpi_firmware_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.630457] r8:00000000 r7:c1031784 r6:c0f37844 r5:c1594c10 r4:00000000 <4>[ 2.637429] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.645955] r7:c1031784 r6:c0f37844 r5:00000000 r4:c1594c10 <4>[ 2.651890] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.660495] r10:c0f25444 r9:00000000 r8:00000000 r7:c1594c10 r6:c46ebea4 r5:c0f37844 <4>[ 2.668583] r4:c1594c10 <4>[ 2.671395] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.680703] r8:00000000 r7:c1594c10 r6:c46ebea4 r5:c0f37844 r4:00000001 <4>[ 2.687664] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.696713] r7:c1594c54 r6:c051e3e4 r5:c46ebea4 r4:00000000 <4>[ 2.702645] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.711170] r6:c1594c10 r5:00000001 r4:c1594c10 <4>[ 2.716051] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.724841] r7:eb9c7300 r6:c1594c10 r5:c0f254f0 r4:c1594c10 <4>[ 2.730775] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.739643] [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xcc) <4>[ 2.748863] r7:eb9c7300 r6:c0f25468 r5:c0f2542c r4:c1594c10 <4>[ 2.754797] [] (deferred_probe_work_func) from [] (process_one_work+0x194/0x274) <4>[ 2.764192] r7:eb9c7300 r6:c0e0d160 r5:c0f25440 r4:c46d5c80 <4>[ 2.770111] [] (process_one_work) from [] (worker_thread+0x220/0x2e4) <4>[ 2.778554] r10:c159f720 r9:c0f8fabc r8:c0e0d174 r7:c0edcaa0 r6:c0e0d160 r5:c46d5c94 <4>[ 2.786640] r4:c46d5c80 <4>[ 2.789444] [] (worker_thread) from [] (kthread+0x11c/0x128) <4>[ 2.797106] r9:c1531e98 r8:c46d5c80 r7:c0134f3c r6:c46ea000 r5:c159f200 r4:c159f700 <4>[ 2.805119] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 2.812602] Exception stack(0xc46ebfb0 to 0xc46ebff8) <4>[ 2.817909] bfa0: 00000000 00000000 00000000 00000000 <4>[ 2.826354] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.834797] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.841679] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0139a40 <4>[ 2.849757] r4:c159f200 r3:00000001 <4>[ 2.853597] ---[ end trace 58996bc4bee07164 ]--- <4>[ 2.860807] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.868414] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.927130] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.932350] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.939740] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.946474] hub 1-0:1.0: USB hub found <6>[ 2.950678] hub 1-0:1.0: 1 port detected <4>[ 2.958014] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <4>[ 2.993844] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 3.004440] mmc0: new high speed SDHC card at address 0002 <6>[ 3.011279] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 3.018777] mmcblk0: p1 <6>[ 3.300547] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.551631] hub 1-1:1.0: USB hub found <6>[ 3.555757] hub 1-1:1.0: 5 ports detected <6>[ 3.880556] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 4.013837] smsc95xx v2.0.0 <6>[ 4.174142] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 4.186678] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.254816] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 4.272118] smsc95xx 1-1.1:1.0 eth0: Link is Down <6>[ 4.300547] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.436766] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.444455] scsi host0: usb-storage 1-1.3:1.0 <5>[ 5.540227] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.850567] random: crng init done <6>[ 6.343573] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 6.360587] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 6.390748] Sending DHCP requests ., OK <6>[ 6.434666] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.14 <6>[ 6.442959] IP-Config: Complete: <6>[ 6.446466] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.201.14, mask=255.255.255.0, gw=192.168.201.1 <6>[ 6.457185] host=bcm2836-rpi-2-b-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 6.464871] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 6.464878] nameserver0=192.168.201.1 <5>[ 6.477167] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 6.487088] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.501216] sd 0:0:0:0: [sda] Write Protect is off <3>[ 6.509958] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 6.515629] sd 0:0:0:0: [sda] Assuming drive cache: write through <5>[ 6.535125] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 6.542719] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 6.552264] ALSA device list: <6>[ 6.555537] No soundcards found. <6>[ 6.559540] uart-pl011 3f201000.serial: no DMA platform data <6>[ 6.565735] cfg80211: failed to load regulatory.db <6>[ 6.601839] sda: sda1 sda2 <5>[ 6.609016] sd 0:0:0:0: [sda] Attached SCSI removable disk <6>[ 6.622715] Freeing unused kernel memory: 1024K <6>[ 6.627892] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 6.858234] udevd[97]: starting version 3.2.9 <27>[ 6.877226] udevd[97]: specified user 'tss' unknown <27>[ 6.882924] udevd[97]: specified group 'tss' unknown <30>[ 6.894297] udevd[98]: starting eudev-3.2.9 <4>[ 7.253634] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 7.299525] bcm2835-rng 3f104000.rng: hwrng registered <3>[ 7.387967] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 7.394809] vchiq: could not load vchiq done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-11125231/environment . /lava-11125231/environment / # /lava-11125231/bin/lava-test-runner /lava-11125231/0 /lava-11125231/bin/lava-test-runner /lava-11125231/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-11125231/0/tests/0_dmesg + cat uuid + UUID=11125231_1.5.<8>[ 8.690789] 2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 8.755735] <8>[ 8.816185] <8>[ 8.876388] + set +x <8>[ 8.887401] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-11125231/environment / # . /lava-11125231/environment/lava-11125231/bin/lava-test-runner /lava-11125231/1 / # /lava-11125231/bin/lava-test-runner /lava-11125231/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-11125231/1/tests/1_bootrr + cat uuid + UUID=11125231_1.5.<8>[ 9.413600] 2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-11125231/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 3f902000.hdmi 3f806000.vec 3fc00000.v3d /lava-11125231/1/../bin/lava-test-case <8>[ 10.496239] /lava-11125231/1/../bin/lava-test-case <8>[ 10.551952] /lava-11125231/1/../bin/lava-test-case <8>[ 10.584772] + set +x <8>[ 10.609787] / #