Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2002 device serialdev,/dev/ttyUSB-lf-bbb-02,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.187 (83 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 1018699/tftp-deploy-c9e51yyn/kernel/zImage tftp 0x82000000 1018699/tftp-deploy-c9e51yyn/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.187 Filename '1018699/tftp-deploy-c9e51yyn/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 4.4 MiB 3.4 MiB/s done Bytes transferred = 4609936 (465790 hex) => tftp 0x83000000 1018699/tftp-deploy-c9e51yyn/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1018699/tftp-deploy-c9e51yyn/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.187 Filename '1018699/tftp-deploy-c9e51yyn/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 13.5 MiB 3.5 MiB/s done Bytes transferred = 14158727 (d80b87 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1018699/tftp-deploy-c9e51yyn/dtb/am335x-boneblack.dtb tftp 0x88000000 1018699/tftp-deploy-c9e51yyn/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.187 Filename '1018699/tftp-deploy-c9e51yyn/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 61.4 KiB 3 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x465790 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-10-10 11:04:55 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 14158663 Bytes = 13.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801256b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.197 (KernelCI@build-j68760-arm-gcc-10-omap2plus-defconfig-xdwj5) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Oct 10 10:38:08 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 20 pages/cpu s49740 r8192 d23988 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 472040K/522240K available (9216K kernel code, 1027K rwdata, 2176K rodata, 1024K init, 278K bss, 33816K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000010] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008342] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018585] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030339] Console: colour dummy device 80x30 <3>[ 0.035208] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042267] This ensures that you still see kernel messages. Please <3>[ 0.048992] update your kernel commandline. <6>[ 0.053595] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095563] CPU: Testing write buffer coherency: ok <6>[ 0.100943] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106408] pid_max: default: 32768 minimum: 301 <6>[ 0.111572] LSM: Security Framework initializing <6>[ 0.116670] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124484] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134147] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.140678] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.147878] rcu: Hierarchical SRCU implementation. <6>[ 0.153669] smp: Bringing up secondary CPUs ... <6>[ 0.158606] smp: Brought up 1 node, 1 CPU <6>[ 0.163034] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.169764] CPU: All CPU(s) started in SVC mode. <6>[ 0.175500] devtmpfs: initialized <6>[ 0.190980] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.199517] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.209954] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.218517] pinctrl core: initialized pinctrl subsystem <6>[ 0.226176] NET: Registered protocol family 16 <6>[ 0.233791] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.260181] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.266276] audit: initializing netlink subsys (disabled) <6>[ 0.273339] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.273353] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.279966] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.286686] cpuidle: using governor menu <5>[ 1.160166] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1 <6>[ 1.284612] No ATAGs? <6>[ 1.287238] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.311634] Kprobes globally optimized <6>[ 1.325161] iommu: Default domain type: Translated <6>[ 1.332706] vgaarb: loaded <5>[ 1.336304] SCSI subsystem initialized <6>[ 1.341546] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.346930] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.356734] PTP clock support registered <6>[ 1.362341] clocksource: Switched to clocksource dmtimer <5>[ 1.974388] VFS: Disk quotas dquot_6.6.0 <6>[ 1.978800] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 1.995800] NET: Registered protocol family 2 <6>[ 2.000865] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.009598] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.018557] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.026854] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.034535] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.041452] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.048486] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.056115] NET: Registered protocol family 1 <6>[ 2.061893] RPC: Registered named UNIX socket transport module. <6>[ 2.068353] RPC: Registered udp transport module. <6>[ 2.073482] RPC: Registered tcp transport module. <6>[ 2.078587] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.085517] PCI: CLS 0 bytes, default 64 <6>[ 2.090545] Trying to unpack rootfs image as initramfs... <6>[ 3.073771] Freeing initrd memory: 13828K <6>[ 3.079355] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.089812] Initialise system trusted keyrings <6>[ 3.095255] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 3.103503] NFS: Registering the id_resolver key type <5>[ 3.109061] Key type id_resolver registered <5>[ 3.113709] Key type id_legacy registered <6>[ 3.118172] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 3.126159] Key type asymmetric registered <5>[ 3.130650] Asymmetric key parser 'x509' registered <6>[ 3.135993] io scheduler mq-deadline registered <6>[ 3.140922] io scheduler kyber registered <3>[ 3.278662] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.287370] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.395707] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 3.437685] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 3.509232] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.517974] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 3.577696] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.586392] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 3.603845] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.612521] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 3.675831] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.684374] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 3.711515] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 3.726372] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <6>[ 3.737293] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 3.746728] printk: console [ttyS0] enabled <6>[ 3.746728] printk: console [ttyS0] enabled <6>[ 3.755794] printk: bootconsole [omap8250] disabled <6>[ 3.755794] printk: bootconsole [omap8250] disabled <6>[ 3.779741] brd: module loaded <6>[ 3.790417] loop: module loaded <3>[ 3.796145] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 3.862304] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 3.905370] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 3.915274] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 3.921926] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 3.927750] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) <6>[ 3.935308] cpsw 4a100000.ethernet: Detected MACID = 04:79:b7:e7:06:e0 <6>[ 3.944355] i2c /dev entries driver <5>[ 3.949932] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 3.957866] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.964409] sdhci: Copyright(c) Pierre Ossman <6>[ 3.969807] sdhci-pltfm: SDHCI platform and OF driver helper <4>[ 3.978131] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.987947] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.996470] Initializing XFRM netlink socket <6>[ 4.001275] NET: Registered protocol family 10 <6>[ 4.007712] Segment Routing with IPv6 <6>[ 4.011761] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.018821] NET: Registered protocol family 17 <6>[ 4.023675] NET: Registered protocol family 15 <5>[ 4.028513] Key type dns_resolver registered <6>[ 4.033710] oprofile: using arm/armv7 <6>[ 4.037755] ThumbEE CPU extension supported. <5>[ 4.042409] Registering SWP/SWPB emulation handler <3>[ 4.047898] omap_voltage_late_init: Voltage driver support not added <3>[ 4.054613] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize <3>[ 4.063028] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize <6>[ 4.071691] SmartReflex Class3 initialized <6>[ 4.076651] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <5>[ 4.085575] Loading compiled-in X.509 certificates <6>[ 4.110673] OMAP GPIO hardware version 0.1 <4>[ 4.143017] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.156674] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.165222] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.171580] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.181622] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 4.193020] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.202033] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.207294] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.221184] mmc1: new high speed MMC card at address 0001 <6>[ 4.228046] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 4.233644] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 4.240319] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 4.246930] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (249:0) <6>[ 4.256458] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.265435] mmcblk1: p1 <6>[ 4.273695] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 4.363844] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 6.442973] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 6.452313] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 6.482451] Sending DHCP requests ., OK <6>[ 6.586422] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.187 <6>[ 6.594328] IP-Config: Complete: <6>[ 6.597839] device=eth0, hwaddr=04:79:b7:e7:06:e0, ipaddr=172.16.3.187, mask=255.255.255.0, gw=172.16.3.3 <6>[ 6.608171] host=172.16.3.187, domain=denx.de, nis-domain=(none) <6>[ 6.614921] bootserver=172.16.3.33, rootserver=172.16.3.33, rootpath= <6>[ 6.614928] nameserver0=172.16.3.3 <6>[ 6.626223] ntpserver0=172.16.3.3 <6>[ 6.633171] Freeing unused kernel memory: 1024K <6>[ 6.642820] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 6.875693] udevd[100]: starting version 3.2.9 <5>[ 6.882083] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 6.890280] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 6.897408] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 6.914414] udevd[100]: specified user 'tss' unknown <27>[ 6.919992] udevd[100]: specified group 'tss' unknown <30>[ 6.934690] udevd[101]: starting eudev-3.2.9 <6>[ 7.690461] remoteproc remoteproc0: wkup_m3 is available <4>[ 7.808507] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 7.817703] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 7.863306] usbcore: registered new interface driver usbfs <6>[ 7.869165] usbcore: registered new interface driver hub <6>[ 7.874984] usbcore: registered new device driver usb <4>[ 8.043880] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 8.053037] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 8.267151] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 8.272996] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 8.442743] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 8.451340] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.458949] usb usb1: Product: MUSB HDRC host driver <6>[ 8.464228] usb usb1: Manufacturer: Linux 5.10.197 musb-hcd <6>[ 8.470088] usb usb1: SerialNumber: musb-hdrc.1 <3>[ 8.788543] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 8.812596] hub 1-0:1.0: USB hub found <6>[ 8.893990] hub 1-0:1.0: 1 port detected <4>[ 8.902176] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 8.913917] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 8.919338] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:01 UTC (946684801) <6>[ 8.930246] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <6>[ 9.025819] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <4>[ 9.033592] at24 2-0054: supply vcc not found, using dummy regulator <3>[ 9.105046] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <4>[ 9.127095] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 9.282431] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <4>[ 9.324734] at24 2-0056: supply vcc not found, using dummy regulator <6>[ 9.357946] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <3>[ 9.449433] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <4>[ 9.462213] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 9.635734] tda998x 0-0070: found TDA19988 <3>[ 9.694330] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <3>[ 9.759142] davinci-mcasp 48038000.mcasp: IRQ common not found <3>[ 9.951507] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 9.982196] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <6>[ 10.142837] remoteproc remoteproc0: powering up wkup_m3 <4>[ 10.148504] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 10.158413] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 10.164667] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <6>[ 10.639830] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 10.647084] random: crng init done <6>[ 10.692918] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_driver_exit [tda998x]) <6>[ 10.721164] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 <6>[ 10.761122] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 10.770779] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <3>[ 10.948568] PM: Cannot get wkup_m3_ipc handle <6>[ 11.161449] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <6>[ 11.244777] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <6>[ 11.257560] omap-aes 53500000.aes: will run requests pump with realtime priority <6>[ 11.339390] omap-sham 53100000.sham: will run requests pump with realtime priority <3>[ 11.376948] PM: Cannot get wkup_m3_ipc handle <3>[ 11.424396] PM: Cannot get wkup_m3_ipc handle <3>[ 11.853110] PM: Cannot get wkup_m3_ipc handle <3>[ 11.886362] PM: Cannot get wkup_m3_ipc handle done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1018699/environment . /lava-1018699/environment / # /lava-1018699/bin/lava-test-runner /lava-1018699/0 /lava-1018699/bin/lava-test-runner /lava-1018699/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1018699/0/tests/0_dmesg + cat uuid + UUID=1018699_1.5.2.4.1 + <8>[ 12.828957] set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 12.894589] <8>[ 12.953772] <8>[ 13.013304] + set +x <8>[ 13.024808] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1018699/environment / # . /lava-1018699/environment/lava-1018699/bin/lava-test-runner /lava-1018699/1 / # /lava-1018699/bin/lava-test-runner /lava-1018699/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1018699/1/tests/1_bootrr + cat uuid + UUID=1018699_1.5.2.4.5 <8>[ 13.569152] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1018699/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto pm33xx /lava-1018699/1/../bin/lava-test-case <8>[ 14.672671] /lava-1018699/1/../bin/lava-test-case <8>[ 14.727248] /lava-1018699/1/../bin/lava-test-case <8>[ 14.760142] /lava-1018699/1/../bin/lava-test-case <8>[ 14.821644] /lava-1018699/1/../bin/lava-test-case <8>[ 14.872974] /lava-1018699/1/../bin/lava-test-case <8>[ 14.913527] /lava-1018699/1/../bin/lava-test-case <8>[ 14.964063] /lava-1018699/1/../bin/lava-test-case <8>[ 15.029641] /lava-1018699/1/../bin/lava-test-case <8>[ 15.070162] /lava-1018699/1/../bin/lava-test-case <8>[ 15.120545] /lava-1018699/1/../bin/lava-test-case <8>[ 15.161184] /lava-1018699/1/../bin/lava-test-case <8>[ 15.211785] /lava-1018699/1/../bin/lava-test-case <8>[ 15.252748] /lava-1018699/1/../bin/lava-test-case <8>[ 15.292906] /lava-1018699/1/../bin/lava-test-case <8>[ 15.333828] /lava-1018699/1/../bin/lava-test-case <8>[ 15.383348] /lava-1018699/1/../bin/lava-test-case <8>[ 15.424598] /lava-1018699/1/../bin/lava-test-case <8>[ 15.475463] /lava-1018699/1/../bin/lava-test-case <8>[ 15.524786] /lava-1018699/1/../bin/lava-test-case <8>[ 15.565135] /lava-1018699/1/../bin/lava-test-case <8>[ 15.615764] /lava-1018699/1/../bin/lava-test-case <8>[ 15.666324] /lava-1018699/1/../bin/lava-test-case <8>[ 15.707475] /lava-1018699/1/../bin/lava-test-case <8>[ 15.758282] /lava-1018699/1/../bin/lava-test-case <8>[ 15.799210] /lava-1018699/1/../bin/lava-test-case <8>[ 15.849780] /lava-1018699/1/../bin/lava-test-case <8>[ 15.890626] /lava-1018699/1/../bin/lava-test-case <8>[ 16.964227] /lava-1018699/1/../bin/lava-test-case <8>[ 17.005352] /lava-1018699/1/../bin/lava-test-case <8>[ 17.056379] /lava-1018699/1/../bin/lava-test-case <8>[ 17.097446] /lava-1018699/1/../bin/lava-test-case <8>[ 17.147838] /lava-1018699/1/../bin/lava-test-case <8>[ 17.188624] /lava-1018699/1/../bin/lava-test-case <8>[ 17.239326] /lava-1018699/1/../bin/lava-test-case <8>[ 17.279656] /lava-1018699/1/../bin/lava-test-case <8>[ 17.330907] /lava-1018699/1/../bin/lava-test-case <8>[ 17.371311] /lava-1018699/1/../bin/lava-test-case <8>[ 17.421848] /lava-1018699/1/../bin/lava-test-case <8>[ 17.462420] /lava-1018699/1/../bin/lava-test-case <8>[ 17.513313] /lava-1018699/1/../bin/lava-test-case <8>[ 17.553449] /lava-1018699/1/../bin/lava-test-case <8>[ 17.603513] /lava-1018699/1/../bin/lava-test-case <8>[ 17.644444] /lava-1018699/1/../bin/lava-test-case <8>[ 17.694591] /lava-1018699/1/../bin/lava-test-case <8>[ 17.734962] /lava-1018699/1/../bin/lava-test-case <8>[ 17.785249] /lava-1018699/1/../bin/lava-test-case <8>[ 17.826054] /lava-1018699/1/../bin/lava-test-case <8>[ 17.876340] /lava-1018699/1/../bin/lava-test-case <8>[ 17.917231] /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found /lava-1018699/1/../bin/lava-test-case <8>[ 17.959904] /lava-1018699/1/../bin/lava-test-case <8>[ 18.010952] /lava-1018699/1/../bin/lava-test-case <8>[ 18.059052] + set +x <8>[ 18.076295] / #