Trying 192.168.56.23... Connected to conserv3. Escape character is '^]'. ser2net port telnet,3003 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.4.4:1.0-port0, 115200n81, local=false [] (Debian GNU/Linux) U-Boot SPL 2023.04-rc1-00202-gce52d133f3 (Feb 06 2023 - 14:59:32 +0000) Trying to boot from MMC1 U-Boot 2023.04-rc1-00202-gce52d133f3 (Feb 06 2023 - 14:59:32 +0000) CPU : AM335X-GP rev 2.0 Model: TI AM335x BeagleBone Black DRAM: 512 MiB U-Boot SPL 2023.04-rc1-00202-gce52d133f3 (Feb 06 2023 - 14:59:32 +0000) Trying to boot from MMC1 U-Boot 2023.04-rc1-00202-gce52d133f3 (Feb 06 2023 - 14:59:32 +0000) CPU : AM335X-GP rev 2.0 Model: TI AM335x BeagleBone Black DRAM: 512 MiB U-Boot SPL 2023.04-rc1-00202-gce52d133f3 (Feb 06 2023 - 14:59:32 +0000) Trying to boot from MMC1 U-Boot 2023.04-rc1-00202-gce52d133f3 (Feb 06 2023 - 14:59:32 +0000) CPU : AM335X-GP rev 2.0 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Core: 160 devices, 18 uclasses, devicetree: separate WDT: Started wdt@44e35000 with servicing every 1000ms (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... Unable to read \"uboot.env\" from mmc0:1... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 42 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.56.138 (140 ms) => setenv serverip 192.168.56.193 setenv serverip 192.168.56.193 => tftp 0x82000000 255427/tftp-deploy-f02jt4v2/kernel/zImage tftp 0x82000000 255427/tftp-deploy-f02jt4v2/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.56.193; our IP address is 192.168.56.138 Filename '255427/tftp-deploy-f02jt4v2/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 4.4 MiB 6 MiB/s done Bytes transferred = 4613824 (4666c0 hex) => tftp 0x83000000 255427/tftp-deploy-f02jt4v2/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 255427/tftp-deploy-f02jt4v2/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.56.193; our IP address is 192.168.56.138 Filename '255427/tftp-deploy-f02jt4v2/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 10.4 MiB 5.9 MiB/s done Bytes transferred = 10928869 (a6c2e5 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 255427/tftp-deploy-f02jt4v2/dtb/am335x-boneblack.dtb tftp 0x88000000 255427/tftp-deploy-f02jt4v2/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.56.193; our IP address is 192.168.56.138 Filename '255427/tftp-deploy-f02jt4v2/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 61.4 KiB 5 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.56.193:/var/lib/lava/dispatcher/tmp/255427/extract-nfsrootfs-ai10co24,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.56.193:/var/lib/lava/dispatcher/tmp/255427/extract-nfsrootfs-ai10co24,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x4666c0 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-11-20 10:22:33 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 10928805 Bytes = 10.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 Using Device Tree in place at 88000000, end 8801256b Working FDT set to 88000000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.200-cip40-rt17 (KernelCI@build-j18960-arm-gcc-10-omap2plus-defconfig-54dbh) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Nov 20 10:02:45 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] On node 0 totalpages: 130560 [ 0.000000] Normal zone: 1148 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.0 (sgx neon) [ 0.000000] percpu: Embedded 16 pages/cpu s33484 r8192 d23860 u65536 [ 0.000000] pcpu-alloc: s33484 r8192 d23860 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.56.193:/var/lib/lava/dispatcher/tmp/255427/extract-nfsrootfs-ai10co24,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 475196K/522240K available (9216K kernel code, 1044K rwdata, 2180K rodata, 1024K init, 272K bss, 30660K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008338] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018558] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030308] Console: colour dummy device 80x30 <3>[ 0.035189] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042247] This ensures that you still see kernel messages. Please <3>[ 0.048971] update your kernel commandline. <6>[ 0.053571] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095556] CPU: Testing write buffer coherency: ok <6>[ 0.100931] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106396] pid_max: default: 32768 minimum: 301 <6>[ 0.111568] LSM: Security Framework initializing <6>[ 0.116665] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124486] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134148] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.140673] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.147881] rcu: Hierarchical SRCU implementation. <6>[ 0.153660] smp: Bringing up secondary CPUs ... <6>[ 0.158597] smp: Brought up 1 node, 1 CPU <6>[ 0.163022] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.169751] CPU: All CPU(s) started in SVC mode. <6>[ 0.175480] devtmpfs: initialized <6>[ 0.191415] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.199948] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.210391] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.219021] pinctrl core: initialized pinctrl subsystem <6>[ 0.226601] NET: Registered protocol family 16 <6>[ 0.234256] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.260738] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.266822] audit: initializing netlink subsys (disabled) <6>[ 0.273897] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.273910] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.273915] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.274180] cpuidle: using governor menu <5>[ 1.172156] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1 <6>[ 1.298011] No ATAGs? <6>[ 1.300685] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.325224] Kprobes globally optimized <7>[ 1.335539] reg-fixed-voltage fixedregulator0: GPIO lookup for consumer (null) <7>[ 1.343396] reg-fixed-voltage fixedregulator0: using device tree for GPIO lookup <7>[ 1.351323] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator0[0]' <7>[ 1.360677] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator0[0]' <7>[ 1.369922] reg-fixed-voltage fixedregulator0: using lookup tables for GPIO lookup <7>[ 1.377981] reg-fixed-voltage fixedregulator0: No GPIO consumer (null) found <6>[ 1.388402] iommu: Default domain type: Translated <6>[ 1.395582] vgaarb: loaded <5>[ 1.399298] SCSI subsystem initialized <7>[ 1.404048] libata version 3.00 loaded. <6>[ 1.408936] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.414321] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.424036] PTP clock support registered <6>[ 1.429646] clocksource: Switched to clocksource dmtimer <5>[ 2.069334] VFS: Disk quotas dquot_6.6.0 <6>[ 2.073839] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 2.090659] NET: Registered protocol family 2 <6>[ 2.095735] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.104436] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.113398] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.121695] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.129357] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.136288] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.143318] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.150943] NET: Registered protocol family 1 <6>[ 2.156738] RPC: Registered named UNIX socket transport module. <6>[ 2.163205] RPC: Registered udp transport module. <6>[ 2.168313] RPC: Registered tcp transport module. <6>[ 2.173438] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.180365] PCI: CLS 0 bytes, default 64 <6>[ 2.185408] Trying to unpack rootfs image as initramfs... <6>[ 2.903427] Freeing initrd memory: 10676K <6>[ 2.909104] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 2.919662] Initialise system trusted keyrings <6>[ 2.924982] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 2.933308] NFS: Registering the id_resolver key type <5>[ 2.938848] Key type id_resolver registered <5>[ 2.943507] Key type id_legacy registered <6>[ 2.947963] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 2.955967] Key type asymmetric registered <5>[ 2.960507] Asymmetric key parser 'x509' registered <6>[ 2.965809] io scheduler mq-deadline registered <6>[ 2.970757] io scheduler kyber registered <3>[ 3.110184] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.118820] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.228586] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 3.271019] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 3.343156] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.351862] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 3.412219] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.420932] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 3.438449] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.447151] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 3.511308] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.519838] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 3.547192] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <7>[ 3.556233] gpio-clk clk_mcasp0: GPIO lookup for consumer enable <7>[ 3.562798] gpio-clk clk_mcasp0: using device tree for GPIO lookup <7>[ 3.569451] gpio-clk clk_mcasp0: No GPIO consumer enable found <6>[ 3.581496] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <7>[ 3.592441] omap8250 44e09000.serial: GPIO lookup for consumer rs485-term <7>[ 3.599845] omap8250 44e09000.serial: using device tree for GPIO lookup <7>[ 3.606939] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' <7>[ 3.622041] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' <7>[ 3.637028] omap8250 44e09000.serial: using lookup tables for GPIO lookup <7>[ 3.644311] omap8250 44e09000.serial: No GPIO consumer rs485-term found <6>[ 3.651443] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 3.660864] printk: console [ttyS0] enabled <6>[ 3.660864] printk: console [ttyS0] enabled <6>[ 3.669927] printk: bootconsole [omap8250] disabled <6>[ 3.669927] printk: bootconsole [omap8250] disabled <6>[ 3.693937] brd: module loaded <6>[ 3.704669] loop: module loaded <3>[ 3.710437] mtdoops: mtd device (mtddev=name/number) must be supplied <7>[ 3.719499] mdio_bus fixed-0: GPIO lookup for consumer reset <7>[ 3.725580] mdio_bus fixed-0: using lookup tables for GPIO lookup <7>[ 3.731992] mdio_bus fixed-0: No GPIO consumer reset found <7>[ 3.742434] mdio_bus 4a101000.mdio: GPIO lookup for consumer reset <7>[ 3.748937] mdio_bus 4a101000.mdio: using device tree for GPIO lookup <7>[ 3.755801] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' <7>[ 3.770884] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' <7>[ 3.785866] mdio_bus 4a101000.mdio: using lookup tables for GPIO lookup <7>[ 3.792791] mdio_bus 4a101000.mdio: No GPIO consumer reset found <6>[ 3.849612] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <7>[ 3.877143] mdio_bus 4a101000.mdio:00: GPIO lookup for consumer reset <7>[ 3.884071] mdio_bus 4a101000.mdio:00: using device tree for GPIO lookup <7>[ 3.891123] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0[0]' <7>[ 3.907526] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0[0]' <7>[ 3.923821] mdio_bus 4a101000.mdio:00: using lookup tables for GPIO lookup <7>[ 3.931008] mdio_bus 4a101000.mdio:00: No GPIO consumer reset found <6>[ 3.938824] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 3.948719] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 3.955438] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 3.961203] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) <6>[ 3.968704] cpsw 4a100000.ethernet: Detected MACID = 90:59:af:5b:13:2b <6>[ 3.977814] i2c /dev entries driver <5>[ 3.983560] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 3.991503] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.997987] sdhci: Copyright(c) Pierre Ossman <6>[ 4.003458] sdhci-pltfm: SDHCI platform and OF driver helper <7>[ 4.010516] sdhci-omap 48060000.mmc: GPIO lookup for consumer cd <7>[ 4.016833] sdhci-omap 48060000.mmc: using device tree for GPIO lookup <7>[ 4.023769] sdhci-omap 48060000.mmc: No GPIO consumer cd found <7>[ 4.030813] sdhci-omap 481d8000.mmc: GPIO lookup for consumer wp <7>[ 4.037129] sdhci-omap 481d8000.mmc: using device tree for GPIO lookup <7>[ 4.044049] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' <7>[ 4.057913] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' <7>[ 4.071694] sdhci-omap 481d8000.mmc: using lookup tables for GPIO lookup <7>[ 4.078691] sdhci-omap 481d8000.mmc: No GPIO consumer wp found <4>[ 4.085020] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.093595] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.101998] Initializing XFRM netlink socket <6>[ 4.106740] NET: Registered protocol family 10 <6>[ 4.113017] Segment Routing with IPv6 <6>[ 4.117064] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.124111] NET: Registered protocol family 17 <6>[ 4.128882] NET: Registered protocol family 15 <5>[ 4.133808] Key type dns_resolver registered <6>[ 4.138959] oprofile: using arm/armv7 <6>[ 4.143098] ThumbEE CPU extension supported. <5>[ 4.147673] Registering SWP/SWPB emulation handler <3>[ 4.153187] omap_voltage_late_init: Voltage driver support not added <3>[ 4.159902] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize <3>[ 4.168296] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize <6>[ 4.176973] SmartReflex Class3 initialized <6>[ 4.183834] printk: console [ttyS0]: printing thread started <5>[ 4.183918] Loading compiled-in X.509 certificates <6>[ 4.203124] OMAP GPIO hardware version 0.1 <6>[ 4.219693] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <4>[ 4.250360] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.257589] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.272192] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.272942] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.276847] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 4.282188] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.282199] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.282458] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.341153] mmc1: new high speed MMC card at address 0001 <6>[ 4.342235] mmcblk1: mmc1:0001 MMC02G 1.79 GiB <6>[ 4.342663] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB <6>[ 4.343055] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB <6>[ 4.343405] mmcblk1rpmb: mmc1:0001 MMC02G partition 3 128 KiB, chardev (249:0) <6>[ 4.350536] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.351979] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 4.432601] mmc0: new high speed SDHC card at address 0001 <6>[ 4.433726] mmcblk0: mmc0:0001 EB1QT 29.8 GiB <6>[ 4.435961] mmcblk0: p1 <6>[ 4.481157] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 6.610322] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 6.639644] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 6.669738] Sending DHCP requests ..., OK <6>[ 13.649601] IP-Config: Got DHCP answer from 192.168.56.254, my address is 192.168.56.138 <6>[ 13.649628] IP-Config: Complete: <6>[ 13.649632] device=eth0, hwaddr=90:59:af:5b:13:2b, ipaddr=192.168.56.138, mask=255.255.255.0, gw=192.168.56.254 <6>[ 13.649647] host=192.168.56.138, domain=mayfield.sirena.org.uk, nis-domain=(none) <6>[ 13.649654] bootserver=192.168.56.254, rootserver=192.168.56.193, rootpath= <6>[ 13.649662] nameserver0=192.168.56.254 <6>[ 13.649673] ntpserver0=50.205.244.22, ntpserver1=85.199.214.99 <6>[ 13.652341] Freeing unused kernel memory: 1024K Loading, please wait... <6>[ 13.720103] Run /init as init process Starting systemd-udevd version 252.12-1~deb12u1 <6>[ 14.835391] remoteproc remoteproc0: wkup_m3 is available <6>[ 15.000449] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 15.000540] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) <3>[ 15.082238] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <4>[ 15.095889] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 15.159539] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <6>[ 15.195784] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <4>[ 15.196283] at24 2-0054: supply vcc not found, using dummy regulator <4>[ 15.269518] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 15.271825] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 15.272141] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <4>[ 15.278355] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <6>[ 15.358145] usbcore: registered new interface driver usbfs <6>[ 15.358225] usbcore: registered new interface driver hub <6>[ 15.358308] usbcore: registered new device driver usb <6>[ 15.358795] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <4>[ 15.380546] at24 2-0056: supply vcc not found, using dummy regulator <3>[ 15.395447] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <4>[ 15.415552] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 15.707038] tda998x 0-0070: found TDA19988 <6>[ 15.784861] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <3>[ 15.926792] davinci-mcasp 48038000.mcasp: IRQ common not found <6>[ 15.960876] remoteproc remoteproc0: powering up wkup_m3 <4>[ 15.961076] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 15.961100] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 15.961109] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <6>[ 16.163138] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 16.163742] random: crng init done <4>[ 16.198971] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 16.199286] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 16.325679] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 16.325730] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 16.386691] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 16.386724] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 16.386733] usb usb1: Product: MUSB HDRC host driver <6>[ 16.386740] usb usb1: Manufacturer: Linux 5.10.200-cip40-rt17 musb-hcd <6>[ 16.386747] usb usb1: SerialNumber: musb-hdrc.1 <6>[ 16.387777] hub 1-0:1.0: USB hub found <6>[ 16.387891] hub 1-0:1.0: 1 port detected <6>[ 16.428854] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <3>[ 16.593600] PM: Cannot get wkup_m3_ipc handle <6>[ 16.627257] omap-sham 53100000.sham: will run requests pump with realtime priority <6>[ 16.637598] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <6>[ 16.666538] omap-aes 53500000.aes: will run requests pump with realtime priority <6>[ 16.684775] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_driver_exit [tda998x]) <6>[ 16.709843] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 <6>[ 16.712437] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <3>[ 16.718146] PM: Cannot get wkup_m3_ipc handle <6>[ 16.745290] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <3>[ 17.164559] PM: Cannot get wkup_m3_ipc handle <3>[ 17.181013] PM: Cannot get wkup_m3_ipc handle Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... done. Begin: Waiting up to 180 secs for any network device to become available ... done. IP-Config: eth0 hardware address 90:59:af:5b:13:2b mtu 1500 DHCP IP-Config: eth0 complete (dhcp from 192.168.56.254): address: 192.168.56.138 broadcast: 192.168.56.255 netmask: 255.255.255.0 gateway: 192.168.56.254 dns0 : 192.168.56.254 dns1 : 0.0.0.0 domain : mayfield.sirena.org.uk rootserver: 192.168.56.254 rootpath: filename : done. Begin: Running /scripts/nfs-bottom ... done. Begin: Running /scripts/init-bottom ... mount: No such file or directory mount: invalid option -- done. mount: No such file or directory run-init: opening console: No such file or directory Target filesystem doesn't have requested /sbin/init. run-init: opening console: No such file or directory run-init: opening console: No such file or directory run-init: opening console: No such file or directory run-init: opening console: No such file or directory run-init: opening console: No such file or directory No init found. Try passing init= bootarg. (initramfs) <3>[ 64.530287] PM: Cannot get wkup_m3_ipc handle <6>[ 64.530502] platform pm33xx: deferred probe pending