Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2000 device serialdev,/dev/ttyUSB-lf-bbb-01,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.208 (107 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 1041969/tftp-deploy-w6d4c1gk/kernel/zImage tftp 0x82000000 1041969/tftp-deploy-w6d4c1gk/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.208 Filename '1041969/tftp-deploy-w6d4c1gk/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 4.4 MiB 3.9 MiB/s done Bytes transferred = 4613824 (4666c0 hex) => tftp 0x83000000 1041969/tftp-deploy-w6d4c1gk/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1041969/tftp-deploy-w6d4c1gk/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.208 Filename '1041969/tftp-deploy-w6d4c1gk/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 13.5 MiB 3.9 MiB/s done Bytes transferred = 14164050 (d82052 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1041969/tftp-deploy-w6d4c1gk/dtb/am335x-boneblack.dtb tftp 0x88000000 1041969/tftp-deploy-w6d4c1gk/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.208 Filename '1041969/tftp-deploy-w6d4c1gk/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 61.4 KiB 3 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x4666c0 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-11-20 11:24:22 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 14163986 Bytes = 13.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801256b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.200-cip40-rt17 (KernelCI@build-j18960-arm-gcc-10-omap2plus-defconfig-54dbh) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Nov 20 10:02:45 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] On node 0 totalpages: 130560 [ 0.000000] Normal zone: 1148 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 16 pages/cpu s33484 r8192 d23860 u65536 [ 0.000000] pcpu-alloc: s33484 r8192 d23860 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 472036K/522240K available (9216K kernel code, 1044K rwdata, 2180K rodata, 1024K init, 272K bss, 33820K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008337] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018559] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030300] Console: colour dummy device 80x30 <3>[ 0.035178] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042234] This ensures that you still see kernel messages. Please <3>[ 0.048957] update your kernel commandline. <6>[ 0.053555] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095559] CPU: Testing write buffer coherency: ok <6>[ 0.100933] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106398] pid_max: default: 32768 minimum: 301 <6>[ 0.111562] LSM: Security Framework initializing <6>[ 0.116656] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124473] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134126] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.140653] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.147858] rcu: Hierarchical SRCU implementation. <6>[ 0.153640] smp: Bringing up secondary CPUs ... <6>[ 0.158578] smp: Brought up 1 node, 1 CPU <6>[ 0.163005] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.169736] CPU: All CPU(s) started in SVC mode. <6>[ 0.175476] devtmpfs: initialized <6>[ 0.191360] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.199900] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.210342] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.218967] pinctrl core: initialized pinctrl subsystem <6>[ 0.226538] NET: Registered protocol family 16 <6>[ 0.234171] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.260603] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.266698] audit: initializing netlink subsys (disabled) <6>[ 0.273759] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.273773] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.273778] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.274038] cpuidle: using governor menu <5>[ 1.171314] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1 <6>[ 1.297214] No ATAGs? <6>[ 1.299885] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.324453] Kprobes globally optimized <7>[ 1.334769] reg-fixed-voltage fixedregulator0: GPIO lookup for consumer (null) <7>[ 1.342627] reg-fixed-voltage fixedregulator0: using device tree for GPIO lookup <7>[ 1.350553] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator0[0]' <7>[ 1.359905] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator0[0]' <7>[ 1.369150] reg-fixed-voltage fixedregulator0: using lookup tables for GPIO lookup <7>[ 1.377208] reg-fixed-voltage fixedregulator0: No GPIO consumer (null) found <6>[ 1.387631] iommu: Default domain type: Translated <6>[ 1.394799] vgaarb: loaded <5>[ 1.398388] SCSI subsystem initialized <7>[ 1.403250] libata version 3.00 loaded. <6>[ 1.408032] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.413508] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.423227] PTP clock support registered <6>[ 1.428785] clocksource: Switched to clocksource dmtimer <5>[ 2.068358] VFS: Disk quotas dquot_6.6.0 <6>[ 2.072859] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 2.089695] NET: Registered protocol family 2 <6>[ 2.094770] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.103463] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.112434] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.120728] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.128390] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.135322] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.142352] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.149977] NET: Registered protocol family 1 <6>[ 2.155763] RPC: Registered named UNIX socket transport module. <6>[ 2.162233] RPC: Registered udp transport module. <6>[ 2.167341] RPC: Registered tcp transport module. <6>[ 2.172468] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.179396] PCI: CLS 0 bytes, default 64 <6>[ 2.184436] Trying to unpack rootfs image as initramfs... <6>[ 3.168634] Freeing initrd memory: 13836K <6>[ 3.174398] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.184855] Initialise system trusted keyrings <6>[ 3.190327] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 3.198459] NFS: Registering the id_resolver key type <5>[ 3.204092] Key type id_resolver registered <5>[ 3.208667] Key type id_legacy registered <6>[ 3.213140] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 3.221141] Key type asymmetric registered <5>[ 3.225633] Asymmetric key parser 'x509' registered <6>[ 3.230979] io scheduler mq-deadline registered <6>[ 3.235910] io scheduler kyber registered <3>[ 3.374946] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.383693] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.493463] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 3.535786] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 3.607926] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.616642] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 3.676910] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.685617] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 3.703134] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.711827] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 3.775852] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.784425] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 3.811710] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <7>[ 3.820705] gpio-clk clk_mcasp0: GPIO lookup for consumer enable <7>[ 3.827179] gpio-clk clk_mcasp0: using device tree for GPIO lookup <7>[ 3.833916] gpio-clk clk_mcasp0: No GPIO consumer enable found <6>[ 3.845826] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <7>[ 3.856650] omap8250 44e09000.serial: GPIO lookup for consumer rs485-term <7>[ 3.864070] omap8250 44e09000.serial: using device tree for GPIO lookup <7>[ 3.871196] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' <7>[ 3.886278] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' <7>[ 3.901263] omap8250 44e09000.serial: using lookup tables for GPIO lookup <7>[ 3.908516] omap8250 44e09000.serial: No GPIO consumer rs485-term found <6>[ 3.915646] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 3.925063] printk: console [ttyS0] enabled <6>[ 3.925063] printk: console [ttyS0] enabled <6>[ 3.934124] printk: bootconsole [omap8250] disabled <6>[ 3.934124] printk: bootconsole [omap8250] disabled <6>[ 3.958005] brd: module loaded <6>[ 3.968842] loop: module loaded <3>[ 3.974365] mtdoops: mtd device (mtddev=name/number) must be supplied <7>[ 3.983500] mdio_bus fixed-0: GPIO lookup for consumer reset <7>[ 3.989549] mdio_bus fixed-0: using lookup tables for GPIO lookup <7>[ 3.995938] mdio_bus fixed-0: No GPIO consumer reset found <7>[ 4.006214] mdio_bus 4a101000.mdio: GPIO lookup for consumer reset <7>[ 4.012858] mdio_bus 4a101000.mdio: using device tree for GPIO lookup <7>[ 4.019635] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' <7>[ 4.034710] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' <7>[ 4.049690] mdio_bus 4a101000.mdio: using lookup tables for GPIO lookup <7>[ 4.056598] mdio_bus 4a101000.mdio: No GPIO consumer reset found <6>[ 4.118744] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <7>[ 4.159946] mdio_bus 4a101000.mdio:00: GPIO lookup for consumer reset <7>[ 4.166725] mdio_bus 4a101000.mdio:00: using device tree for GPIO lookup <7>[ 4.173833] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0[0]' <7>[ 4.190247] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0[0]' <7>[ 4.206541] mdio_bus 4a101000.mdio:00: using lookup tables for GPIO lookup <7>[ 4.213728] mdio_bus 4a101000.mdio:00: No GPIO consumer reset found <6>[ 4.221560] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 4.231463] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 4.238120] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 4.243927] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) <6>[ 4.251517] cpsw 4a100000.ethernet: Detected MACID = 34:03:de:5e:2c:05 <6>[ 4.260602] i2c /dev entries driver <5>[ 4.266110] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 4.274054] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.280600] sdhci: Copyright(c) Pierre Ossman <6>[ 4.285974] sdhci-pltfm: SDHCI platform and OF driver helper <7>[ 4.293024] sdhci-omap 48060000.mmc: GPIO lookup for consumer cd <7>[ 4.299439] sdhci-omap 48060000.mmc: using device tree for GPIO lookup <7>[ 4.306286] sdhci-omap 48060000.mmc: No GPIO consumer cd found <7>[ 4.313326] sdhci-omap 481d8000.mmc: GPIO lookup for consumer wp <7>[ 4.319733] sdhci-omap 481d8000.mmc: using device tree for GPIO lookup <7>[ 4.326567] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' <7>[ 4.340463] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' <7>[ 4.354225] sdhci-omap 481d8000.mmc: using lookup tables for GPIO lookup <7>[ 4.361239] sdhci-omap 481d8000.mmc: No GPIO consumer wp found <4>[ 4.367530] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.376050] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.384443] Initializing XFRM netlink socket <6>[ 4.389275] NET: Registered protocol family 10 <6>[ 4.395470] Segment Routing with IPv6 <6>[ 4.399612] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.406574] NET: Registered protocol family 17 <6>[ 4.411413] NET: Registered protocol family 15 <5>[ 4.416242] Key type dns_resolver registered <6>[ 4.421452] oprofile: using arm/armv7 <6>[ 4.425497] ThumbEE CPU extension supported. <5>[ 4.430140] Registering SWP/SWPB emulation handler <3>[ 4.435624] omap_voltage_late_init: Voltage driver support not added <3>[ 4.442342] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize <3>[ 4.450771] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize <6>[ 4.459451] SmartReflex Class3 initialized <6>[ 4.466069] printk: console [ttyS0]: printing thread started <5>[ 4.466151] Loading compiled-in X.509 certificates <6>[ 4.485306] OMAP GPIO hardware version 0.1 <6>[ 4.501849] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <4>[ 4.529457] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.536983] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.551654] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.552400] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.556311] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 4.561583] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.561593] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.561855] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.609642] mmc1: new high speed MMC card at address 0001 <6>[ 4.610704] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 4.611130] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 4.611535] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 4.611874] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (249:0) <6>[ 4.613944] mmcblk1: p1 <6>[ 4.652776] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.654271] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 4.730308] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 6.859445] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 6.888762] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 6.918870] Sending DHCP requests ., OK <6>[ 7.078739] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.208 <6>[ 7.078761] IP-Config: Complete: <6>[ 7.078764] device=eth0, hwaddr=34:03:de:5e:2c:05, ipaddr=172.16.3.208, mask=255.255.255.0, gw=172.16.3.3 <6>[ 7.078778] host=172.16.3.208, domain=denx.de, nis-domain=(none) <6>[ 7.078784] bootserver=172.16.3.33, rootserver=172.16.3.33, rootpath= <6>[ 7.078792] nameserver0=172.16.3.3 <6>[ 7.078801] ntpserver0=172.16.3.3 <6>[ 7.081552] Freeing unused kernel memory: 1024K <6>[ 7.149304] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.382907] udevd[101]: starting version 3.2.9 <5>[ 7.384380] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 7.384791] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 7.384926] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 7.421013] udevd[101]: specified user 'tss' unknown <27>[ 7.421229] udevd[101]: specified group 'tss' unknown <30>[ 7.431558] udevd[102]: starting eudev-3.2.9 <6>[ 8.178953] remoteproc remoteproc0: wkup_m3 is available <4>[ 8.314033] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 8.314360] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 8.355135] usbcore: registered new interface driver usbfs <6>[ 8.355212] usbcore: registered new interface driver hub <6>[ 8.355298] usbcore: registered new device driver usb <4>[ 8.711066] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 8.711416] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 8.920384] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 8.920438] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 8.977396] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 8.977428] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.977437] usb usb1: Product: MUSB HDRC host driver <6>[ 8.977444] usb usb1: Manufacturer: Linux 5.10.200-cip40-rt17 musb-hcd <6>[ 8.977451] usb usb1: SerialNumber: musb-hdrc.1 <6>[ 8.978416] hub 1-0:1.0: USB hub found <6>[ 8.978493] hub 1-0:1.0: 1 port detected <4>[ 9.148246] at24 0-0050: supply vcc not found, using dummy regulator <3>[ 9.229485] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 9.243457] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <4>[ 9.243915] at24 2-0054: supply vcc not found, using dummy regulator <4>[ 9.279678] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 9.311474] at24 2-0056: supply vcc not found, using dummy regulator <3>[ 9.320724] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <4>[ 9.403042] at24 2-0057: supply vcc not found, using dummy regulator <4>[ 9.425187] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <6>[ 9.455412] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <6>[ 9.499592] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 9.499668] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:01 UTC (946684801) <6>[ 9.568983] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <3>[ 9.936691] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 10.041925] tda998x 0-0070: found TDA19988 <3>[ 10.091541] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <3>[ 10.268226] davinci-mcasp 48038000.mcasp: IRQ common not found <3>[ 10.269901] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 10.329960] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <6>[ 10.559373] remoteproc remoteproc0: powering up wkup_m3 <4>[ 10.559522] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 10.559541] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 10.559549] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <6>[ 10.855234] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_driver_exit [tda998x]) <6>[ 10.861363] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 <6>[ 10.955356] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 10.965767] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 11.062182] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 11.063489] random: crng init done <3>[ 11.392830] PM: Cannot get wkup_m3_ipc handle <6>[ 11.588962] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <6>[ 11.597555] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <6>[ 11.623565] omap-aes 53500000.aes: will run requests pump with realtime priority <6>[ 11.623915] omap-sham 53100000.sham: will run requests pump with realtime priority <3>[ 11.784069] PM: Cannot get wkup_m3_ipc handle <3>[ 12.274578] PM: Cannot get wkup_m3_ipc handle <3>[ 12.292853] PM: Cannot get wkup_m3_ipc handle done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1041969/environment . /lava-1041969/environment / # /lava-1041969/bin/lava-test-runner /lava-1041969/0 /lava-1041969/bin/lava-test-runner /lava-1041969/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1041969/0/tests/0_dmesg + cat uuid + UUID=1041969_1.5.2.4.1 + <8>[ 13.228145] set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 13.293174] <8>[ 13.353428] + set +x <8>[ 13.413686] / # <8>[ 13.415759] #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-1041969/environment / # . /lava-1041969/environment/lava-1041969/bin/lava-test-runner /lava-1041969/1 / # /lava-1041969/bin/lava-test-runner /lava-1041969/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1041969/1/tests/1_bootrr + cat uuid + UUID=1041969_1.5.2.4.5 + <8>[ 13.947600] set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1041969/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto pm33xx /lava-1041969/1/../bin/lava-test-case <8>[ 15.049502] /lava-1041969/1/../bin/lava-test-case <8>[ 15.103913] /lava-1041969/1/../bin/lava-test-case <8>[ 15.136738] /lava-1041969/1/../bin/lava-test-case <8>[ 15.197794] /lava-1041969/1/../bin/lava-test-case <8>[ 15.248339] /lava-1041969/1/../bin/lava-test-case <8>[ 15.289761] /lava-1041969/1/../bin/lava-test-case <8>[ 15.340839] /lava-1041969/1/../bin/lava-test-case <8>[ 15.390417] /lava-1041969/1/../bin/lava-test-case <8>[ 15.447191] /lava-1041969/1/../bin/lava-test-case <8>[ 15.497174] /lava-1041969/1/../bin/lava-test-case <8>[ 15.537628] /lava-1041969/1/../bin/lava-test-case <8>[ 15.587893] /lava-1041969/1/../bin/lava-test-case <8>[ 15.627870] /lava-1041969/1/../bin/lava-test-case <8>[ 15.667450] /lava-1041969/1/../bin/lava-test-case <8>[ 15.708332] /lava-1041969/1/../bin/lava-test-case <8>[ 15.757998] /lava-1041969/1/../bin/lava-test-case <8>[ 15.799845] /lava-1041969/1/../bin/lava-test-case <8>[ 15.850831] /lava-1041969/1/../bin/lava-test-case <8>[ 15.900033] /lava-1041969/1/../bin/lava-test-case <8>[ 15.940789] /lava-1041969/1/../bin/lava-test-case <8>[ 15.991216] /lava-1041969/1/../bin/lava-test-case <8>[ 16.041611] /lava-1041969/1/../bin/lava-test-case <8>[ 16.082532] /lava-1041969/1/../bin/lava-test-case <8>[ 16.133252] /lava-1041969/1/../bin/lava-test-case <8>[ 16.174146] /lava-1041969/1/../bin/lava-test-case <8>[ 16.224182] /lava-1041969/1/../bin/lava-test-case <8>[ 16.264941] /lava-1041969/1/../bin/lava-test-case <8>[ 17.347330] /lava-1041969/1/../bin/lava-test-case <8>[ 17.388138] /lava-1041969/1/../bin/lava-test-case <8>[ 17.439638] /lava-1041969/1/../bin/lava-test-case <8>[ 17.480863] /lava-1041969/1/../bin/lava-test-case <8>[ 17.531223] /lava-1041969/1/../bin/lava-test-case <8>[ 17.571625] /lava-1041969/1/../bin/lava-test-case <8>[ 17.621947] /lava-1041969/1/../bin/lava-test-case <8>[ 17.662648] /lava-1041969/1/../bin/lava-test-case <8>[ 17.712973] /lava-1041969/1/../bin/lava-test-case <8>[ 17.753138] /lava-1041969/1/../bin/lava-test-case <8>[ 17.803538] /lava-1041969/1/../bin/lava-test-case <8>[ 17.843994] /lava-1041969/1/../bin/lava-test-case <8>[ 17.894257] /lava-1041969/1/../bin/lava-test-case <8>[ 17.934630] /lava-1041969/1/../bin/lava-test-case <8>[ 17.985152] /lava-1041969/1/../bin/lava-test-case <8>[ 18.025727] /lava-1041969/1/../bin/lava-test-case <8>[ 18.075818] /lava-1041969/1/../bin/lava-test-case <8>[ 18.116071] /lava-1041969/1/../bin/lava-test-case <8>[ 18.165977] /lava-1041969/1/../bin/lava-test-case <8>[ 18.206814] /lava-1041969/1/../bin/lava-test-case <8>[ 18.256961] /lava-1041969/1/../bin/lava-test-case /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: <8>[ 18.297555] line 84: assert_device-present: not found /lava-1041969/1/../bin/lava-test-case <8>[ 18.343998] /lava-1041969/1/../bin/lava-test-case <8>[ 18.394653] /lava-1041969/1/../bin/lava-test-case <8>[ 18.442131] + set +x