Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500) Trying to boot from MMC2 Loading Environment from EXT4... Card did not respond to voltage select! U-Boot 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500), Build: jenkins-github_Bootloader-Builder-131 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... Card did not respond to voltage select! Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.11.4 (3 ms) => setenv serverip 192.168.11.5 setenv serverip 192.168.11.5 => tftp 0x82000000 1044116/tftp-deploy-bm4t5dp1/kernel/zImage tftp 0x82000000 1044116/tftp-deploy-bm4t5dp1/kernel/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.4 Filename '1044116/tftp-deploy-bm4t5dp1/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 5.2 MiB/s done Bytes transferred = 4614144 (466800 hex) => tftp 0x83000000 1044116/tftp-deploy-bm4t5dp1/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1044116/tftp-deploy-bm4t5dp1/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.4 Filename '1044116/tftp-deploy-bm4t5dp1/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################### 5.2 MiB/s done Bytes transferred = 10463535 (9fa92f hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1044116/tftp-deploy-bm4t5dp1/dtb/am335x-boneblack.dtb tftp 0x88000000 1044116/tftp-deploy-bm4t5dp1/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.4 Filename '1044116/tftp-deploy-bm4t5dp1/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *##### 5 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.11.5:/var/lib/lava/dispatcher/tmp/1044116/extract-nfsrootfs-x08w5e7h,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.11.5:/var/lib/lava/dispatcher/tmp/1044116/extract-nfsrootfs-x08w5e7h,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-11-24 0:09:06 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 10463471 Bytes = 10 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801256b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.201-cip41-rt17 (KernelCI@build-j21812-arm-gcc-10-omap2plus-defconfig-98bg4) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Nov 23 22:55:16 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] On node 0 totalpages: 130560 [ 0.000000] Normal zone: 1148 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 16 pages/cpu s33484 r8192 d23860 u65536 [ 0.000000] pcpu-alloc: s33484 r8192 d23860 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.11.5:/var/lib/lava/dispatcher/tmp/1044116/extract-nfsrootfs-x08w5e7h,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 475652K/522240K available (9216K kernel code, 1044K rwdata, 2180K rodata, 1024K init, 272K bss, 30204K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008338] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018549] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030218] Console: colour dummy device 80x30 <3>[ 0.035099] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042156] This ensures that you still see kernel messages. Please <3>[ 0.048880] update your kernel commandline. <6>[ 0.053481] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095548] CPU: Testing write buffer coherency: ok <6>[ 0.100927] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106393] pid_max: default: 32768 minimum: 301 <6>[ 0.111558] LSM: Security Framework initializing <6>[ 0.116658] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124474] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134130] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.140674] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.147882] rcu: Hierarchical SRCU implementation. <6>[ 0.153665] smp: Bringing up secondary CPUs ... <6>[ 0.158600] smp: Brought up 1 node, 1 CPU <6>[ 0.163026] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.169757] CPU: All CPU(s) started in SVC mode. <6>[ 0.175496] devtmpfs: initialized <6>[ 0.191383] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.199916] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.210359] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.218991] pinctrl core: initialized pinctrl subsystem <6>[ 0.226549] NET: Registered protocol family 16 <6>[ 0.234202] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.260915] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.267013] audit: initializing netlink subsys (disabled) <6>[ 0.274083] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.274096] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.274101] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.274365] cpuidle: using governor menu <5>[ 1.163808] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1 <6>[ 1.288956] No ATAGs? <6>[ 1.291588] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.315979] Kprobes globally optimized <7>[ 1.326238] reg-fixed-voltage fixedregulator0: GPIO lookup for consumer (null) <7>[ 1.334102] reg-fixed-voltage fixedregulator0: using device tree for GPIO lookup <7>[ 1.342032] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator0[0]' <7>[ 1.351387] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator0[0]' <7>[ 1.360632] reg-fixed-voltage fixedregulator0: using lookup tables for GPIO lookup <7>[ 1.368691] reg-fixed-voltage fixedregulator0: No GPIO consumer (null) found <6>[ 1.379003] iommu: Default domain type: Translated <6>[ 1.386031] vgaarb: loaded <5>[ 1.389724] SCSI subsystem initialized <7>[ 1.394481] libata version 3.00 loaded. <6>[ 1.399340] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.404727] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.414469] PTP clock support registered <6>[ 1.420057] clocksource: Switched to clocksource dmtimer <5>[ 2.059807] VFS: Disk quotas dquot_6.6.0 <6>[ 2.064319] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 2.081182] NET: Registered protocol family 2 <6>[ 2.086256] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.094954] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.103913] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.112208] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.119870] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.126801] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.133832] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.141456] NET: Registered protocol family 1 <6>[ 2.147249] RPC: Registered named UNIX socket transport module. <6>[ 2.153717] RPC: Registered udp transport module. <6>[ 2.158826] RPC: Registered tcp transport module. <6>[ 2.163952] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.170878] PCI: CLS 0 bytes, default 64 <6>[ 2.175914] Trying to unpack rootfs image as initramfs... <6>[ 2.864425] Freeing initrd memory: 10220K <6>[ 2.870183] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 2.880659] Initialise system trusted keyrings <6>[ 2.885943] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 2.894252] NFS: Registering the id_resolver key type <5>[ 2.899788] Key type id_resolver registered <5>[ 2.904436] Key type id_legacy registered <6>[ 2.908890] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 2.916878] Key type asymmetric registered <5>[ 2.921419] Asymmetric key parser 'x509' registered <6>[ 2.926719] io scheduler mq-deadline registered <6>[ 2.931668] io scheduler kyber registered <3>[ 3.069906] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.078624] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.187534] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 3.229617] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 3.301492] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.310196] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 3.370159] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.378792] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 3.396350] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.405035] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 3.468670] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.477246] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 3.504911] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <7>[ 3.513846] gpio-clk clk_mcasp0: GPIO lookup for consumer enable <7>[ 3.520434] gpio-clk clk_mcasp0: using device tree for GPIO lookup <7>[ 3.527089] gpio-clk clk_mcasp0: No GPIO consumer enable found <6>[ 3.538942] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <7>[ 3.549739] omap8250 44e09000.serial: GPIO lookup for consumer rs485-term <7>[ 3.557144] omap8250 44e09000.serial: using device tree for GPIO lookup <7>[ 3.564270] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' <7>[ 3.579359] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' <7>[ 3.594344] omap8250 44e09000.serial: using lookup tables for GPIO lookup <7>[ 3.601617] omap8250 44e09000.serial: No GPIO consumer rs485-term found <6>[ 3.608732] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 3.618147] printk: console [ttyS0] enabled <6>[ 3.618147] printk: console [ttyS0] enabled <6>[ 3.627210] printk: bootconsole [omap8250] disabled <6>[ 3.627210] printk: bootconsole [omap8250] disabled <6>[ 3.651285] brd: module loaded <6>[ 3.662024] loop: module loaded <3>[ 3.667454] mtdoops: mtd device (mtddev=name/number) must be supplied <7>[ 3.676648] mdio_bus fixed-0: GPIO lookup for consumer reset <7>[ 3.682715] mdio_bus fixed-0: using lookup tables for GPIO lookup <7>[ 3.689103] mdio_bus fixed-0: No GPIO consumer reset found <7>[ 3.699393] mdio_bus 4a101000.mdio: GPIO lookup for consumer reset <7>[ 3.706003] mdio_bus 4a101000.mdio: using device tree for GPIO lookup <7>[ 3.712778] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' <7>[ 3.727851] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' <7>[ 3.742833] mdio_bus 4a101000.mdio: using lookup tables for GPIO lookup <7>[ 3.749740] mdio_bus 4a101000.mdio: No GPIO consumer reset found <6>[ 3.810035] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <3>[ 3.818272] mdio_bus 4a101000.mdio: MDIO device at address 0 is missing. <6>[ 3.825683] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 3.832387] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 3.838102] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) <6>[ 3.845631] cpsw 4a100000.ethernet: Detected MACID = 64:cf:d9:3f:a0:d5 <6>[ 3.854606] i2c /dev entries driver <5>[ 3.860207] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 3.868055] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.874605] sdhci: Copyright(c) Pierre Ossman <6>[ 3.879995] sdhci-pltfm: SDHCI platform and OF driver helper <7>[ 3.887352] sdhci-omap 48060000.mmc: GPIO lookup for consumer cd <7>[ 3.893755] sdhci-omap 48060000.mmc: using device tree for GPIO lookup <7>[ 3.900620] sdhci-omap 48060000.mmc: No GPIO consumer cd found <7>[ 3.907424] sdhci-omap 481d8000.mmc: GPIO lookup for consumer wp <7>[ 3.913808] sdhci-omap 481d8000.mmc: using device tree for GPIO lookup <7>[ 3.920660] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' <7>[ 3.934516] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' <7>[ 3.948291] sdhci-omap 481d8000.mmc: using lookup tables for GPIO lookup <7>[ 3.955308] sdhci-omap 481d8000.mmc: No GPIO consumer wp found <4>[ 3.961614] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.970155] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.978428] Initializing XFRM netlink socket <6>[ 3.983258] NET: Registered protocol family 10 <6>[ 3.989472] Segment Routing with IPv6 <6>[ 3.993602] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.000618] NET: Registered protocol family 17 <6>[ 4.005385] NET: Registered protocol family 15 <5>[ 4.010290] Key type dns_resolver registered <6>[ 4.015435] oprofile: using arm/armv7 <6>[ 4.019488] ThumbEE CPU extension supported. <5>[ 4.024134] Registering SWP/SWPB emulation handler <3>[ 4.029611] omap_voltage_late_init: Voltage driver support not added <3>[ 4.036326] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize <3>[ 4.044773] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize <6>[ 4.053455] SmartReflex Class3 initialized <6>[ 4.060250] printk: console [ttyS0]: printing thread started <5>[ 4.060366] Loading compiled-in X.509 certificates <6>[ 4.079471] OMAP GPIO hardware version 0.1 <6>[ 4.096125] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <4>[ 4.120727] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.128108] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.143066] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.143811] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.147580] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 4.152636] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.152646] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.152903] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.214246] mmc1: new high speed MMC card at address 0001 <6>[ 4.215320] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 4.215747] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 4.216142] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 4.216497] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (249:0) <6>[ 4.218561] mmcblk1: p1 <6>[ 4.222942] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.225403] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <3>[ 4.275422] cpsw 4a100000.ethernet: phy \"/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0\" not found on slave 0 <6>[ 24.289977] Waiting up to 100 more seconds for network. <6>[ 44.299976] Waiting up to 80 more seconds for network. <6>[ 64.309976] Waiting up to 60 more seconds for network. <6>[ 84.319977] Waiting up to 40 more seconds for network. <6>[ 104.329976] Waiting up to 20 more seconds for network. <5>[ 124.309989] Sending DHCP requests ...... timed out! <3>[ 205.872226] IP-Config: Retrying forever (NFS root)... <6>[ 205.872282] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <3>[ 205.874141] cpsw 4a100000.ethernet: phy \"/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0\" not found on slave 0 <6>[ 225.889977] Waiting up to 100 more seconds for network. <6>[ 245.899977] Waiting up to 80 more seconds for network.