Trying 192.168.56.33... Connected to conserv4. Escape character is '^]'. ser2net port telnet,3003 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.1.4:1.0-port0, 115200n81, local=false [,115200N81] (Debian GNU/Linux) U-Boot 2024.01 (Jan 15 2024 - 02:22:14 +0000) DRAM: 948 MiB (effective 1.9 GiB) RPI 4 Model B (0xb03115) Core: 211 devices, 16 uclasses, devicetree: board MMC: mmcnr@7e300000: 1, mmc@7e340000: 0 Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1... In: serial,usbkbd Out: serial,vidconsole Err: serial,vidconsole Net: eth0: ethernet@7d580000 PCIe BRCM: link up, 5.0 Gbps x1 (SSC) starting USB... Bus xhci_pci: Register 5000420 NbrPorts 5 Starting the controller USB XHCI 1.00 scanning bus xhci_pci for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp ethernet@7d580000 Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.6.13 (785 ms) U-Boot> setenv serverip 192.168.6.2 setenv serverip 192.168.6.2 U-Boot> tftp 0x00080000 971334/tftp-deploy-6v_og718/kernel/Image tftp 0x00080000 971334/tftp-deploy-6v_og718/kernel/Image Using ethernet@7d580000 device TFTP from server 192.168.6.2; our IP address is 192.168.6.13 Filename '971334/tftp-deploy-6v_og718/kernel/Image'. Load address: 0x80000 Loading: *################################################## 36.1 MiB 16.3 MiB/s done Bytes transferred = 37902848 (2425a00 hex) U-Boot> tftp 0x06700000 971334/tftp-deploy-6v_og718/ramdisk/ramdisk.cpio.gz.uboot tftp 0x06700000 971334/tftp-deploy-6v_og718/ramdisk/ramdisk.cpio.gz.uboot Using ethernet@7d580000 device TFTP from server 192.168.6.2; our IP address is 192.168.6.13 Filename '971334/tftp-deploy-6v_og718/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x6700000 Loading: *######################################T ############ 59 MiB 6.7 MiB/s done Bytes transferred = 61869360 (3b00d30 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x06400000 971334/tftp-deploy-6v_og718/dtb/bcm2711-rpi-4-b.dtb tftp 0x06400000 971334/tftp-deploy-6v_og718/dtb/bcm2711-rpi-4-b.dtb Using ethernet@7d580000 device TFTP from server 192.168.6.2; our IP address is 192.168.6.13 Filename '971334/tftp-deploy-6v_og718/dtb/bcm2711-rpi-4-b.dtb'. Load address: 0x6400000 Loading: *################################################## 26.8 KiB 3.7 MiB/s done Bytes transferred = 27434 (6b2a hex) U-Boot> setenv bootargs 'console=ttyS1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyS1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> booti 0x00080000 0x06700000 0x06400000 booti 0x00080000 0x06700000 0x06400000 Moving Image from 0x80000 to 0x200000, end=26d0000 ## Loading init Ramdisk from Legacy Image at 06700000 ... Image Name: Image Type: AArch64 Linux RAMDisk Image (uncompressed) Data Size: 61869296 Bytes = 59 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 06400000 Booting using the fdt blob at 0x6400000 Working FDT set to 6400000 Loading Ramdisk to 36427000, end 39f27cf0 ... OK Loading Device Tree to 000000003641d000, end 0000000036426b29 ... OK Working FDT set to 3641d000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 6.1.112-cip30-rt17 (KernelCI@build-j371832-arm64-gcc-12-defconfig-fgvj6) (aarch64-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Sun Nov 10 13:07:02 UTC 2024 [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.5 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000032400000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] earlycon: bcm2835aux0 at MMIO32 0x00000000fe215040 (options '115200n8') [ 0.000000] printk: bootconsole [bcm2835aux0] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7fbf6a00-0x7fbf8fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges [ 0.000000] percpu: Embedded 21 pages/cpu s47848 r8192 d29976 u86016 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 496944 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: console=ttyS1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] software IO TLB: area num 4. <6>[ 0.000000] software IO TLB: mapped [mem 0x000000002e400000-0x0000000032400000] (64MB) <6>[ 0.000000] Memory: 1749028K/2019328K available (16192K kernel code, 3734K rwdata, 9360K rodata, 7616K init, 609K bss, 204764K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. <6>[ 0.000000] Trampoline variant of Tasks RCU enabled. <6>[ 0.000000] Tracing variant of Tasks RCU enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 <6>[ 0.000000] Root IRQ handler: gic_handle_irq <6>[ 0.000000] GIC: Using split EOI/Deactivate mode <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns <6>[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns <6>[ 0.008670] Console: colour dummy device 80x25 <6>[ 0.013521] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) <6>[ 0.024354] pid_max: default: 32768 minimum: 301 <6>[ 0.029361] LSM: Security Framework initializing <6>[ 0.034419] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 0.042194] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 0.052274] cblist_init_generic: Setting adjustable number of callback queues. <6>[ 0.059884] cblist_init_generic: Setting shift to 2 and lim to 1. <6>[ 0.066406] cblist_init_generic: Setting adjustable number of callback queues. <6>[ 0.073994] cblist_init_generic: Setting shift to 2 and lim to 1. <6>[ 0.080745] rcu: Hierarchical SRCU implementation. <6>[ 0.080750] rcu: Max phase no-delay instances is 1000. <6>[ 0.080819] printk: bootconsole [bcm2835aux0] printing thread started <6>[ 0.100706] EFI services will not be available. <6>[ 0.101011] smp: Bringing up secondary CPUs ... <6>[ 0.101576] Detected PIPT I-cache on CPU1 <6>[ 0.101707] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] <6>[ 0.123002] Detected PIPT I-cache on CPU2 <6>[ 0.123107] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] <6>[ 0.123698] Detected PIPT I-cache on CPU3 <6>[ 0.123804] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] <6>[ 0.123885] smp: Brought up 1 node, 4 CPUs <6>[ 0.123895] SMP: Total of 4 processors activated. <6>[ 0.123901] CPU features: detected: 32-bit EL0 Support <6>[ 0.123904] CPU features: detected: 32-bit EL1 Support <6>[ 0.123910] CPU features: detected: CRC32 instructions <6>[ 0.123996] CPU: All CPU(s) started at EL2 <6>[ 0.124020] alternatives: applying system-wide alternatives <6>[ 0.130009] devtmpfs: initialized <6>[ 0.136619] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns <6>[ 0.136645] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.138653] pinctrl core: initialized pinctrl subsystem <6>[ 0.140694] DMI not present or invalid. <6>[ 0.141519] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.142688] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.143024] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.143184] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.143244] audit: initializing netlink subsys (disabled) <5>[ 0.143397] audit: type=2000 audit(0.104:1): state=initialized audit_enabled=0 res=1 <6>[ 0.144582] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.144588] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.144656] cpuidle: using governor menu <6>[ 0.144866] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. <6>[ 0.144983] ASID allocator initialised with 32768 entries <6>[ 0.146958] Serial: AMBA PL011 UART driver <6>[ 0.170960] KASLR enabled <6>[ 0.181587] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.181595] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.181602] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages <6>[ 0.181606] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page <6>[ 0.181612] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.181615] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.181621] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages <6>[ 0.181625] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page <6>[ 0.354347] printk: console [ttyS1] printing thread started 6<6>[ 0.354359] printk: console [ttyS1] enabled >[ 0.184281] ACPI: Interpreter disabled. <6>[ 0.354366] printk: bootconsole [bcm2835aux0] disabled <6>[ 0.368842] printk: bootconsole [bcm2835aux0] printing thread stopped <6>[ 0.370980] SuperH (H)SCI(F) driver initialized <6>[ 0.371632] msm_serial: driver initialized <6>[ 0.399154] loop: module loaded <6>[ 0.400572] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 0.401877] megasas: 07.719.03.00-rc1 <6>[ 0.409240] tun: Universal TUN/TAP device driver, 1.6 <6>[ 0.412622] thunder_xcv, ver 1.0 <6>[ 0.412667] thunder_bgx, ver 1.0 <6>[ 0.412705] nicpf, ver 1.0 <6>[ 0.414365] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version <6>[ 0.414372] hns3: Copyright (c) 2017 Huawei Corporation. <6>[ 0.414448] hclge is initializing <6>[ 0.414471] e1000: Intel(R) PRO/1000 Network Driver <6>[ 0.414474] e1000: Copyright (c) 1999-2006 Intel Corporation. <6>[ 0.414515] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 0.414518] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 0.414556] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 0.414560] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 0.414592] igbvf: Intel(R) Gigabit Virtual Function Network Driver <6>[ 0.414596] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. <6>[ 0.415038] sky2: driver version 1.30 <6>[ 0.421183] VFIO - User Level meta-driver version: 0.3 <6>[ 0.425547] usbcore: registered new interface driver usb-storage <6>[ 0.439769] i2c_dev: i2c /dev entries driver <6>[ 0.444693] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode <6>[ 0.448331] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode <6>[ 0.453960] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 0.456717] sdhci: Secure Digital Host Controller Interface driver <6>[ 0.456726] sdhci: Copyright(c) Pierre Ossman <6>[ 0.457683] Synopsys Designware Multimedia Card Interface Driver <6>[ 0.458996] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 0.464933] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 0.477877] usbcore: registered new interface driver usbhid <6>[ 0.477889] usbhid: USB HID core driver <6>[ 0.479281] bcm2835-mbox fe00b880.mailbox: mailbox enabled <6>[ 0.486986] NET: Registered PF_PACKET protocol family <6>[ 0.487157] 9pnet: Installing 9P2000 support <5>[ 0.487222] Key type dns_resolver registered <6>[ 0.487637] registered taskstats version 1 <5>[ 0.487666] Loading compiled-in X.509 certificates <6>[ 0.500783] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 32, base_baud = 0) is a PL011 rev2 <6>[ 0.500972] serial serial0: tty port ttyAMA0 registered <6>[ 0.503602] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-10-17T15:39:16 <3>[ 0.505583] uart-pl011 fe201000.serial: Failed to create device link (0x180) with soc:firmware:gpio <4>[ 0.507991] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator <4>[ 0.508161] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator <6>[ 0.610422] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM <6>[ 0.617647] sdhci-iproc fe300000.mmc: allocated mmc-pwrseq <6>[ 0.652402] mmc0: SDHCI controller on fe300000.mmc [fe300000.mmc] using PIO <6>[ 0.691907] mmc1: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA <6>[ 0.749554] mmc0: new high speed SDIO card at address 0001 <6>[ 0.792898] mmc1: new ultra high speed DDR50 SDXC card at address aaaa <6>[ 0.793785] mmcblk1: mmc1:aaaa SD256 238 GiB <6>[ 0.796006] mmcblk1: p1 p2 <6>[ 4.831861] Freeing initrd memory: 60416K <6>[ 12.968456] clk: Disabling unused clocks <6>[ 12.968549] ALSA device list: <6>[ 12.968557] No soundcards found. <6>[ 12.975035] Freeing unused kernel memory: 7616K <6>[ 12.975161] Run /init as init process <30>[ 13.010431] systemd[1]: System time before build time, advancing clock. <6>[ 13.023997] NET: Registered PF_INET6 protocol family <6>[ 13.025270] Segment Routing with IPv6 <6>[ 13.025313] In-situ OAM (IOAM) with IPv6 Welcome <30>[ 13.051213] systemd[1]: systemd 252.22-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) to [1mD<30>[ 13.051246] systemd[1]: Detected architecture arm64. ebian GNU/Linux 12 (bookworm)[0m! <30>[ 13.108654] systemd[1]: Hostname set to . <30>[ 13.425175] systemd[1]: Queued start job for default target graphical.target. [[0;32m OK [0m] Created slice [0;1;<30>[ 13.456878] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 39msystem-getty.slice[0m - Slice /system/getty. [[0;32m OK [0m] Crea<30>[ 13.486177] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. ted slice [0;1;39msystem-modpr…lice[0m - Slice /system/modprobe. [[0;32m OK [0m] Created slic<30>[ 13.514100] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. e [0;1;39msystem-seria…[0m - Slice /system/serial-getty. [[0;32m OK [0m] Created slic<30>[ 13.541785] systemd[1]: Created slice user.slice - User and Session Slice. e [0;1;39muser.slice[0m - User and Session Slice. [[0;32m OK [0m] Started [0;1;39msys<30>[ 13.564834] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. temd-ask-passwo…quests to Console Directory Watch. [[0;32m OK [0m] Started [0;1;39msystemd-ask<30>[ 13.592727] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. -passwo… Requests to Wall Directory Watch. Expecting device [0;1;39mdev-ttyS1.dev<30>[ 13.620559] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). ice[0m <30>[ 13.620674] systemd[1]: Expecting device dev-ttyS1.device - /dev/ttyS1... - /dev/ttyS1... [[0;32m OK [0m] Reached target [0;1;39mcryp<30>[ 13.664521] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. tsetup.…get[0m - Local Encrypted Volumes. [[0;32m OK [0m] Reached target [0;1;39minte<30>[ 13.692538] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. grityse…Local Integrity Protected Volumes. [[0;32m OK [0m] Reached target [0;1;39mpath<30>[ 13.720552] systemd[1]: Reached target paths.target - Path Units. s.target[0m - Path Units. [[0;32m OK [0m] Reached target [0;1;39mremo<30>[ 13.744517] systemd[1]: Reached target remote-fs.target - Remote File Systems. te-fs.target[0m - Remote File Systems. [[0;32m OK [0m] Reached target [0;1;39mslic<30>[ 13.768504] systemd[1]: Reached target slices.target - Slice Units. es.target[0m - Slice Units. [[0;32m OK [0m] Reached target [0;1;39mswap<30>[ 13.792523] systemd[1]: Reached target swap.target - Swaps. .target[0m - Swaps. [[0;32m OK [0m] Reached target [0;1;39mveri<30>[ 13.812556] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. tysetup… - Local Verity Protected Volumes. [[0;32m OK [0m] Listening on [0;1;3<30>[ 13.840834] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 9msystemd-initc… initctl Compatibility Named Pipe. [[0;32m OK [0m] Listening on<30>[ 13.869559] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [0;1;39msystemd-journ…socket[0m - Journal Audit Socket. [[0;32m OK [0m] Listening on [0;1;3<30>[ 13.897136] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 9msystemd-journ…t[0m - Journal Socket (/dev/log). [[0;32m OK [0m] Listening on [0;1;3<30>[ 13.929156] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 9msystemd-journald.socket[0m - Journal Socket. [[0;32m OK [0m] Listening on [0;1;3<30>[ 13.957190] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 9msystemd-udevd….socket[0m - udev Control Socket. [[0;32m OK [0m] Listening on [0;1;3<30>[ 13.984999] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 9msystemd-udevd…l.socket[0m - udev Kernel Socket. Mounting [0;1;39mdev-hugepages.mount[<30>[ 14.044686] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 0m - Huge Pages File System... Mounting [0;1;39mdev-mqueue.mo<30>[ 14.073251] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... unt…POSIX Message Queue File System... Mounting [0;1;39msys-kernel-de<30>[ 14.105057] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... bug.…[0m - Kernel Debug File System... <30>[ 14.132995] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). <30>[ 14.137943] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... Starting [0;1;39mkmod-static-nodes…ate List of Static Device Nodes... Starting [0;1;39mmodprobe@conf<30>[ 14.181345] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... igfs…m - Load Kernel Module configfs... Starting [0;1;39mmodpr<30>[ 14.213446] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... obe@dm_mod.s…[0m - Load Kernel Module dm_mod... <6>[ 14.229162] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Starting [0;1;<30>[ 14.246337] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 39mmodprobe@drm.service[0m - Load Kernel Module drm... Starting [0;1;39mmodpr<30>[ 14.277499] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... obe@efi_psto…- Load Kernel Module efi_pstore... Starting [0;1;39mmodpr<30>[ 14.309471] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... obe@loop.ser…e[0m - Load Kernel Module loop... <30>[ 14.344131] systemd[1]: Starting systemd-journald.service - Journal Service... Starting [0;1;39msystemd-journald.service[0m - Journal Service... Starting [0;1;39msyste<30>[ 14.374018] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... md-modules-l…rvice[0m - Load Kernel Modules... Starting [0;1;39msyste<30>[ 14.405485] systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line... md-network-g… units from Kernel command line... Starting [0;1;39msystemd-remou<30>[ 14.441169] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... nt-f…nt Root and Kernel File Systems... Starting [0;1;39msyste<30>[ 14.473530] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... md-udev-trig…[0m - Coldplug All udev Devices... [[0;32m<30>[ 14.512068] systemd[1]: Started systemd-journald.service - Journal Service. OK [0m] Started [0;1;39msystemd-journald.service[0m - Journal Service. [[0;32m OK [0m] Mounted [0;1;39mdev-hugepages.mount[0m - Huge Pages File System. [[0;32m OK [0m] Mounted [0;1;39mdev-mqueue.mount[…- POSIX Message Queue File System. [[0;32m OK [0m] Mounted [0;1;39msys-kernel-debug.m…nt[0m - Kernel Debug File System. [[0;32m OK [0m] Finished [0;1;39mkmod-static-nodes…reate List of Static Device Nodes. [[0;32m OK [0m] Finished [0;1;39mmodprobe@configfs…[0m - Load Kernel Module configfs. [[0;32m OK [0m] Finished [0;1;39mmodprobe@dm_mod.s…e[0m - Load Kernel Module dm_mod. [[0;32m OK [0m] Finished [0;1;39mmodprobe@drm.service[0m - Load Kernel Module drm. [[0;32m OK [0m] Finished [0;1;39mmodprobe@efi_psto…m - Load Kernel Module efi_pstore. [[0;32m OK [0m] Finished [0;1;39mmodprobe@loop.service[0m - Load Kernel Module loop. [[0;32m OK [0m] Finished [0;1;39msystemd-modules-l…service[0m - Load Kernel Modules. [[0;32m OK [0m] Finished [0;1;39msystemd-network-g…rk units from Kernel command line. [[0;1;31mFAILED[0m] Failed to start [0;1;39msystemd-re…ount Root and Kernel File Systems. See 'systemctl status systemd-remount-fs.service' for details. [[0;32m OK [0m] Reached target [0;1;39mnetwork-pre…get[0m - Preparation for Network. Mounting [0;1;39msys-kernel-config…ernel Configuration File System... Starting [0;1;39msystemd-journal-f…h Journal to Persistent Storage... Starting [0;1;39msyste<46>[ 14.910002] systemd-journald[127]: Received client request to flush runtime journal. md-random-se…ice[0m - Load/Save Random Seed... Starting [0;1;39msystemd-sysctl.se…ce[0m - Apply Kernel Variables... Starting [0;1;39msystemd-sysusers.…rvice[0m - Create System Users... [[0;32m OK [0m] Mounted [0;1;39msys-kernel-config.… Kernel Configuration File System. [[0;32m OK [0m] Finished [0;1;39msystemd-journal-f…ush Journal to Persistent Storage. [[0;32m OK [0m] Finished [0;1;39msystemd-sysctl.service[0m - Apply Kernel Variables. [[0;32m OK [0m] Finished [0;1;39msystemd-sysusers.service[0m - Create System Users. Starting [0;1;39msystemd-tmpfiles-…ate Static Device Nodes in /dev... [[0;32m OK [0m] Finished [0;1;39msystemd-tmpfiles-…reate Static Device Nodes in /dev. [[0;32m OK [0m] Reached target [0;1;39mlocal-fs-pr…reparation for Local File Systems. [[0;32m OK [0m] Reached target [0;1;39mlocal-fs.target[0m - Local File Systems. Starting [0;1;39msystemd-tmpfiles-… Volatile Files and Directories... Starting [0;1;39msystemd-udevd.ser…ger for Device Events and Files... [[0;32m OK [0m] Finished [0;1;39msystemd-tmpfiles-…te Volatile Files and Directories. [[0;32m OK [0m] Finished [0;1;39msystemd-udev-trig…e[0m - Coldplug All udev Devices. Starting [0;1;39msystemd-timesyncd… - Network Time Synchronization... Starting [0;1;39msystemd-update-ut…rd System Boot/Shutdown in UTMP... [[0;32m OK [0m] Finished [0;1;39msystemd-update-ut…cord System Boot/Shutdown in UTMP. [[0;32m OK [0m] Started [0;1;39msystemd-udevd.serv…nager for Device Events and Files. [[0;32m OK [0m] Started [0;1;39msystemd-timesyncd.…0m - Network Time Synchronization. [[0;32m OK [0m] Reached target [0;1;39msysinit.target[0m - System Initialization. [[0;32m OK [0m] Started [0;1;39msystemd-tmpfiles-c… Cleanup of Temporary Directories. [[0;32m OK [0m] Reached target [0;1;39mtime-set.target[0m - System Time Set. [[0;32m OK [0m] Started [0;1;39mfstrim.timer[0m - Discard unused blocks once a week. [[0;32m OK [0m] Reached target [0;1;39mtimers.target[0m - Timer Units. [[0;32m OK [0m] Listening on [0;1;39mdbus.socket[…- D-Bus System Message Bus Socket. [[0;32m OK [0m] Reached target [0;1;39msockets.target[0m - Socket Units. [[0;32m OK [0m] Reached target [0;1;39mbasic.target[0m - Basic System. Starting [0;1;39mdbus.service[0m - D-Bus System Message Bus... Starting [0;1;39msystemd-logind.se…ice[0m - User Login Management... Starting [0;1;39msystemd-user-sess…vice[0m - Permit User Sessions... [[0;32m OK [0m] Finished [0;1;39msystemd-user-sess…ervice[0m - Permit User Sessions. <5>[ 15.964373] random: crng init done [[0;32m OK [0m] Found device [0;1;39mdev-ttyS1.device[0m - /dev/ttyS1. [[0;32m OK [0m] Started [0;1;39mdbus.service[0m - D-Bus System Message Bus. [[0;32m OK [0m] Finished [0;1;39msystemd-random-se…rvice[0m - Load/Save Random Seed. [[0;32m OK [0m] Started [0;1;39msystemd-logind.service[0m - User Login Management. [[0;32m OK [0m] Started [0;1;39mgetty@tty1.service[0m - Getty on tty1. [[0;32m OK [0m] Started [0;1;39mserial-getty@ttyS1…rvice[0m - Serial Getty on ttyS1. [[0;32m OK [0m] Reached targ<6>[ 16.323960] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: et [0;1;39mgetty.target[0m - Login Prompts. <6>[ 16.323988] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] <6>[ 16.324028] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000 <6>[ 16.324063] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0400000000 [[0;32m OK [0m] Reached target [0;1;39mmulti-user.target[0m - Multi-User System. <6>[ 16.378149] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 <6>[ 16.378175] pci_bus 0000:00: root bus resource [bus 00-ff] <6>[ 16.378213] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [[0;32m<6>[ 16.378263] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 OK [<6>[ 16.378358] pci 0000:00:00.0: PME# supported from D0 D3hot 0m] Reac<4>[ 16.383108] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator hed targ<4>[ 16.390407] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator et [0;1<4>[ 16.390507] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator ;39mgrap<6>[ 16.440925] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 hical.target[0m - Graphical Interface. <6>[ 16.464433] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) <6>[ 16.464596] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 <6>[ 16.464691] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 16.465048] pci 0000:01:00.0: PME# supported from D0 D3hot Starting [0;1;39msystemd-update-ut… Record Runlevel Change in UTMP... <6>[ 16.518149] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff] <6>[ 16.518179] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] <6>[ 16.518204] pci 0000:00:00.0: PCI bridge to [bus 01] <6>[ 16.518215] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] <6>[ 16.553018] iproc-rng200 fe104000.rng: hwrng registered <6>[ 16.553213] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [[0;32m OK [0m] Reached target [0;1;39musb-gadget.…m - Hardware activated USB gadget. <6>[ 16.583057] pcieport 0000:00:00.0: PME: Signaling with IRQ 38 <6>[ 16.609305] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus <5>[ 16.616017] cfg80211: Loading compiled-in X.509 certificates for regulatory database <6>[ 16.617957] pcieport 0000:00:00.0: AER: enabled with IRQ 38 <6>[ 16.619864] Bluetooth: Core ver 2.22 <6>[ 16.619995] NET: Registered PF_BLUETOOTH protocol family <6>[ 16.620001] Bluetooth: HCI device and connection manager initialized [[0;32m<6>[ 16.620020] Bluetooth: HCI socket layer initialized OK [<6>[ 16.620030] Bluetooth: L2CAP socket layer initialized <6>[ 16.620050] Bluetooth: SCO socket layer initialized 0m] Finished [0;1;39msy<6>[ 16.667620] Bluetooth: HCI UART driver ver 2.3 stemd-up<6>[ 16.667644] Bluetooth: HCI UART protocol H4 registered date-ut�<6>[ 16.672910] Bluetooth: HCI UART protocol LL registered �� - Rec<6>[ 16.673682] Bluetooth: HCI UART protocol Broadcom registered ord Runl<6>[ 16.673749] Bluetooth: HCI UART protocol QCA registered evel Change in UTMP. <6>[ 16.673796] Bluetooth: HCI UART protocol Marvell registered <4>[ 16.674871] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator <4>[ 16.675074] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator <6>[ 16.675754] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) <5>[ 16.700000] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <5>[ 16.701027] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' <4>[ 16.701178] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 16.701196] cfg80211: failed to load regulatory.db <6>[ 16.760933] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) Debian G<6>[ 16.792053] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) NU/Linux<6>[ 16.792779] uart-pl011 fe201000.serial: no DMA platform data 12 debi<6>[ 16.795803] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) an-bookworm-arm6<6>[ 16.796079] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) 4 ttyS1 debia<6>[ 16.796323] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) n-bookwo<6>[ 16.796583] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) rm-arm64<6>[ 16.796742] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) login: root (automatic login) Linux debian-bookworm-arm64 6<6>[ 16.850316] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 .1.112-c<6>[ 16.850703] vc4-drm gpu: [drm] Cannot find any crtc or sizes ip30-rt1<6>[ 16.853586] vc4-drm gpu: [drm] Cannot find any crtc or sizes 7 #1 SMP<6>[ 16.853868] vc4-drm gpu: [drm] Cannot find any crtc or sizes PREEMPT<6>[ 16.878457] [drm] Initialized v3d 1.0.0 20180419 for fec00000.gpu on minor 1 Sun Nov 10 13:07:02 UTC 2024 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for eac<6>[ 16.896852] bcmgenet fd580000.ethernet end0: renamed from eth0 h program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. / # <6>[ 16.961001] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 <4>[ 16.961069] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2 <4>[ 16.961096] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.bin failed with error -2 <6>[ 16.976177] xhci_hcd 0000:01:00.0: xHCI Host Controller <6>[ 16.976213] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 / # <6>[ 16.976541] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890 <6>[ 16.977046] xhci_hcd 0000:01:00.0: xHCI Host Controller <6>[ 16.977052] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2# <6>[ 16.977059] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed <6>[ 16.977538] hub 1-0:1.0: USB hub found <6>[ 16.977560] hub 1-0:1.0: 1 port detected <6>[ 16.978103] hub 2-0:1.0: USB hub found <6>[ 16.978149] hub 2-0:1.0: 4 ports detected <6>[ 17.040877] Bluetooth: hci0: BCM: chip id 107 <6>[ 17.041126] Bluetooth: hci0: BCM: features 0x2f <6>[ 17.042582] Bluetooth: hci0: BCM4345C0 <6>[ 17.042586] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 <3>[ 17.042698] Bluetooth: hci0: BCM: firmware Patch file not found, tried: <3>[ 17.042701] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.raspberrypi,4-model-b.hcd' <3>[ 17.042703] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd' <3>[ 17.042704] Bluetooth: hci0: BCM: 'brcm/BCM.raspberrypi,4-model-b.hcd' <3>[ 17.042706] Bluetooth: hci0: BCM: 'brcm/BCM.hcd' # / # export SHELL=/bin/sh export SHELL=/bin/sh<6>[ 17.232382] usb 1-1: new high-speed USB device number 2 using xhci_hcd / # . /lava-971334/environment . /lava-971334/environment / # /lava-971334/bin/lava-test-runner /lava-971334/0 <6>[ 17.384686] hub 1-1:1.0: USB hub found <6>[ 17.384956] hub 1-1:1.0: 4 ports detected /lava-971334/bin/lava-test-runner /lava-971334/0 + export TESTRUN_ID=0_igt-kms-vc4 + cd /l<8>[ 17.499018] ava-971334/0/tests/0_igt-kms-vc4 + cat uuid + UUID=971334_1.5.2.4.1 + set +x + IGT_FORCE_DRIVER=vc4 /usr/bin/igt-parser.sh core_auth core_getclient core_getstats core_getversion core_setmaster_vs_<8>[ 17.522859] auth drm_read kms_addfb_basic kms_atomic kms_flip_event_leak kms_prop_blob kms_setmode kms_vblank vc4_create_bo vc4_dmabuf_poll vc4_label_bo vc4_lookup_<14>[ 17.540913] [IGT] core_auth: executing fail vc4<14>[ 17.541165] [IGT] core_auth: starting subtest getclient-simple _mmap vc<14>[ 17.541339] [IGT] core_auth: finished subtest getclient-simple, SUCCESS 4_prefmo<14>[ 17.541421] [IGT] core_auth: exiting, ret=0 n vc4_pu<8>[ 17.546343] rgeable_bo vc4_t<14>[ 17.575648] [IGT] core_auth: executing iling vc<14>[ 17.575880] [IGT] core_auth: starting subtest getclient-master-drop 4_wait_b<14>[ 17.576099] [IGT] core_auth: finished subtest getclient-master-drop, SUCCESS o vc4_wa<14>[ 17.576193] [IGT] core_auth: exiting, ret=0 it_seqno<8>[ 17.581222] IGT-Version: 1.28-ga44<14>[ 17.610669] [IGT] core_auth: executing ebfe (aa<14>[ 17.610984] [IGT] core_auth: starting subtest basic-auth rch64) (<14>[ 17.611135] [IGT] core_auth: finished subtest basic-auth, SUCCESS Linux: 6<14>[ 17.611194] [IGT] core_auth: exiting, ret=0 .1.112-c<8>[ 17.615851] ip30-rt17 aarch6<14>[ 17.643440] [IGT] core_auth: executing 4) Usin<14>[ 17.643734] [IGT] core_auth: starting subtest many-magics g IGT_SRANDOM=1706305720 for randomisation Starting subtest: ge<14>[ 17.658935] [IGT] core_auth: finished subtest many-magics, SUCCESS tclient-<14>[ 17.659020] [IGT] core_auth: exiting, ret=0 simple <8>[ 17.663805] Opened d<8>[ 17.665298] evice: /dev/dri/card0 [1mSubtest getclient-simple: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=170630572<14>[ 17.697884] [IGT] core_getclient: executing 0 for ra<14>[ 17.698211] [IGT] core_getclient: exiting, ret=0 ndomisat<8>[ 17.703388] ion Starting subtest: getclient-master-drop Opened device: /dev/dri/card0 [1mSubtest getclient-master-drop: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305720 for randomi<14>[ 17.739064] [IGT] core_getstats: executing sation <14>[ 17.739443] [IGT] core_getstats: exiting, ret=0 Opened d<8>[ 17.744986] evice: /dev/dri/card0 Starting subtest: basic-auth [1mSubtest basic-auth: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Opened device: /dev/dri/card0 Starting subtest: many-magic<14>[ 17.781059] [IGT] core_getversion: executing s Reope<14>[ 17.781455] [IGT] core_getversion: exiting, ret=0 ning dev<8>[ 17.787248] ice failed after 1020 opens [1mSubtest many-magics: SUCCESS (0.015s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Opened device: /dev/dri/card0 SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Lin<14>[ 17.824916] [IGT] core_setmaster_vs_auth: executing ux: 6.1.<14>[ 17.825463] [IGT] core_setmaster_vs_auth: exiting, ret=0 112-cip3<8>[ 17.831153] 0-rt17 aarch64) Using IGT_SRANDOM=1706305720 for random<8>[ 17.851116] isation Opened device: /dev/dri/card0 SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305720 for ran<14>[ 17.869467] [IGT] drm_read: executing domisation Opened device: /dev/dri/card0 SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe <6>[ 17.880796] vc4-drm gpu: [drm] Cannot find any crtc or sizes (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Opened device: /dev/dri/card0 SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Opened device: /dev/dri/card0 <3>[ 17.968451] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 Starting<14>[ 18.015817] [IGT] drm_read: starting subtest invalid-buffer subtest<14>[ 18.015931] [IGT] drm_read: finished subtest invalid-buffer, SUCCESS : invalid-buffer [1mSubtest in<14>[ 18.032016] [IGT] drm_read: exiting, ret=0 valid-bu<8>[ 18.037318] ffer: SUCCESS (0.000s)[0m IGT-Vers<14>[ 18.055887] [IGT] drm_read: executing ion: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305721 for randomisation Opened device: /dev/dri/card0 Starting subtest<14>[ 18.203409] [IGT] drm_read: starting subtest fault-buffer : fault-buffer [1mSubt<14>[ 18.203687] [IGT] drm_read: finished subtest fault-buffer, SUCCESS est faul<14>[ 18.207640] [IGT] drm_read: exiting, ret=0 t-buffer<8>[ 18.217811] : SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44eb<14>[ 18.242929] [IGT] drm_read: executing fe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305721 for randomisation Opened device: /dev/dri/card0 Starting subtest: empty-block <14>[ 18.388486] [IGT] drm_read: starting subtest empty-block [1mSubtest empty-block: SUCCESS (1.000s)[0m <14>[ 19.388787] [IGT] drm_read: finished subtest empty-block, SUCCESS <14>[ 19.395515] [IGT] drm_read: exiting, ret=0 <8>[ 19.409376] IGT-Version: 1.28-ga44ebfe (aarc<14>[ 19.429950] [IGT] drm_read: executing h64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305722 for randomisation Opened device: /dev/dri/card0 Starting subtest: empty-nonblock [1mSubtest em<14>[ 19.576591] [IGT] drm_read: starting subtest empty-nonblock pty-nonblock: SUCCESS (0<14>[ 19.576708] [IGT] drm_read: finished subtest empty-nonblock, SUCCESS .000s)[<14>[ 19.580678] [IGT] drm_read: exiting, ret=0 0m <8>[ 19.593737] IGT-Version: 1.28-ga44eb<14>[ 19.618808] [IGT] drm_read: executing fe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305722 for randomisation Opened device: /dev/dri/card0 Starting subtest: short-buffer-block [<14>[ 19.765342] [IGT] drm_read: starting subtest short-buffer-block 1mSubtest short-<14>[ 19.765467] [IGT] drm_read: finished subtest short-buffer-block, SUCCESS buffer-b<14>[ 19.769372] [IGT] drm_read: exiting, ret=0 lock: SU<8>[ 19.782141] CCESS (0.000s)[0m IGT-Version: 1.2<14>[ 19.807382] [IGT] drm_read: executing 8-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305722 for randomisation Opened device: /dev/dri/card0 Starting subtest<14>[ 19.955524] [IGT] drm_read: starting subtest short-buffer-nonblock : short-buffer-n<14>[ 19.955654] [IGT] drm_read: finished subtest short-buffer-nonblock, SUCCESS onblock <14>[ 19.959583] [IGT] drm_read: exiting, ret=0 [1mSub<8>[ 19.970669] test short-buffer-nonblock: SUCCESS (0.000s)[0m IGT-Version: 1.2<14>[ 19.995210] [IGT] drm_read: executing 8-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305722 for randomisation Opened device: /dev/dri/card0 Starting subtest: short-buffer-w<14>[ 20.141846] [IGT] drm_read: starting subtest short-buffer-wakeup akeup [1mSubt<14>[ 52.355925] [IGT] drm_read: finished subtest short-buffer-wakeup, SUCCESS est short-buffer-wakeup: SUCCESS (32.214s)[0m <14>[ 52.366135] [IGT] drm_read: exiting, ret=0 <8>[ 52.371950] <8>[ 52.373573] <8>[ 52.394781] IGT-Version: 1.28-ga44ebfe (aarc<14>[ 52.413170] [IGT] kms_addfb_basic: executing h64) (Linux: 6.1.112-cip30-rt17 aarch64) Using <14>[ 52.422668] [IGT] kms_addfb_basic: starting subtest unused-handle IGT_SRAN<14>[ 52.422811] [IGT] kms_addfb_basic: finished subtest unused-handle, SUCCESS DOM=1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest: unused-handle [1mSubtest unused-handle: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Te<14>[ 52.461112] [IGT] kms_addfb_basic: exiting, ret=0 st requi<8>[ 52.467948] rement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drm<14>[ 52.491325] [IGT] kms_addfb_basic: executing test.c:880: Test requirement: i<14>[ 52.499209] [IGT] kms_addfb_basic: starting subtest unused-pitches s_intel_<14>[ 52.499336] [IGT] kms_addfb_basic: finished subtest unused-pitches, SUCCESS device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest: unused-pitches [1mSubtest unused-pitches: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Tes<14>[ 52.543054] [IGT] kms_addfb_basic: exiting, ret=0 t requirement: is_intel_device(fd) Test<8>[ 52.550367] requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../l<14>[ 52.573454] [IGT] kms_addfb_basic: executing ib/drmte<14>[ 52.577743] [IGT] kms_addfb_basic: starting subtest unused-offsets st.c:880: Test requirement: is_intel_de<14>[ 52.588624] [IGT] kms_addfb_basic: finished subtest unused-offsets, SUCCESS vice(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest: unused-offsets [1mSubtest unused-offsets: SUCCESS (0.000s)[0m Test requirement not met in funct<14>[ 52.621923] [IGT] kms_addfb_basic: exiting, ret=0 ion igt_require_intel, file ../lib/drmte<8>[ 52.629596] st.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_in<14>[ 52.656588] [IGT] kms_addfb_basic: executing tel, fil<14>[ 52.661125] [IGT] kms_addfb_basic: starting subtest unused-modifier e ../lib<14>[ 52.672080] [IGT] kms_addfb_basic: finished subtest unused-modifier, SUCCESS /drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest: unused-modifier [1mSubtest unused-m<14>[ 52.701464] [IGT] kms_addfb_basic: exiting, ret=0 odifier:<8>[ 52.706714] SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_de<14>[ 52.725505] [IGT] kms_addfb_basic: executing vice(fd)<14>[ 52.730084] [IGT] kms_addfb_basic: starting subtest clobberred-modifier Test requirement not met in function i<14>[ 52.741052] [IGT] kms_addfb_basic: finished subtest clobberred-modifier, SKIP gt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip<14>[ 52.773017] [IGT] kms_addfb_basic: exiting, ret=77 30-rt17 <8>[ 52.778157] aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened device: /dev/dri/card0 <14>[ 52.796048] [IGT] kms_addfb_basic: executing Starting subtest: clobberred-modifier Test requirement not met in function igt_require<14>[ 52.805250] [IGT] kms_addfb_basic: starting subtest invalid-smem-bo-on-discrete _i915, f<14>[ 52.805362] [IGT] kms_addfb_basic: finished subtest invalid-smem-bo-on-discrete, SKIP ile ../lib/drmtest.c:885: Test requirement: is_i915_device(fd) [1mSubtest clobberred-modifier: SKIP (0.008s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test req<14>[ 52.845449] [IGT] kms_addfb_basic: exiting, ret=77 uirement<8>[ 52.851298] not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirem<14>[ 52.871427] [IGT] kms_addfb_basic: executing ent not met in function igt_require_inte<14>[ 52.879089] [IGT] kms_addfb_basic: starting subtest legacy-format l, file ../lib/drmtest.c:880: Test requirement: is_intel_device<14>[ 52.890657] [IGT] kms_addfb_basic: finished subtest legacy-format, SUCCESS (fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-smem-bo-on-discrete Test requirement not met in function igt_require_intel, file ../lib/drmtes<14>[ 52.922613] [IGT] kms_addfb_basic: exiting, ret=0 t.c:880:<8>[ 52.928196] Test requirement: is_intel_device(fd) [1mSubtest invalid-smem-bo-on-discrete: SKIP (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib<14>[ 52.948502] [IGT] kms_addfb_basic: executing /drmtest.c:880: Test requirement: is_in<14>[ 52.959219] [IGT] kms_addfb_basic: starting subtest no-handle tel_devi<14>[ 52.959314] [IGT] kms_addfb_basic: finished subtest no-handle, SUCCESS ce(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device<14>[ 52.993605] [IGT] kms_addfb_basic: exiting, ret=0 (fd) IG<8>[ 52.999559] T-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened d<14>[ 53.019845] [IGT] kms_addfb_basic: executing evice: /dev/dri/card0 Starting subtest: legacy-format Successfully fuzzed 10000 {bpp, <14>[ 53.031298] [IGT] kms_addfb_basic: starting subtest basic depth} v<14>[ 53.031398] [IGT] kms_addfb_basic: finished subtest basic, SUCCESS ariations [1mSubtest legacy-format: SUCCESS (0.011s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmte<14>[ 53.067097] [IGT] kms_addfb_basic: exiting, ret=0 st.c:880<8>[ 53.073319] : Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(<14>[ 53.092510] [IGT] kms_addfb_basic: executing fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.11<14>[ 53.101440] [IGT] kms_addfb_basic: starting subtest bad-pitch-0 2-cip30-<14>[ 53.101536] [IGT] kms_addfb_basic: finished subtest bad-pitch-0, SUCCESS rt17 aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest: no-handle [1mSubtest no-handle: SUCCESS (0.000s)[0m Test requirement not met in function igt<14>[ 53.136058] [IGT] kms_addfb_basic: exiting, ret=0 _require<8>[ 53.141634] _intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requ<14>[ 53.160557] [IGT] kms_addfb_basic: executing irement: is_intel_device(fd) Test requi<14>[ 53.171216] [IGT] kms_addfb_basic: starting subtest bad-pitch-32 rement n<14>[ 53.171308] [IGT] kms_addfb_basic: finished subtest bad-pitch-32, SUCCESS ot met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/d<14>[ 53.207240] [IGT] kms_addfb_basic: exiting, ret=0 ri/card0<8>[ 53.213126] Starting subtest: basic [1mSubtest basic: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: <14>[ 53.232464] [IGT] kms_addfb_basic: executing Test requirement: is_intel_device(fd) Test requirement <14>[ 53.241915] [IGT] kms_addfb_basic: starting subtest bad-pitch-63 not met <14>[ 53.242011] [IGT] kms_addfb_basic: finished subtest bad-pitch-63, SUCCESS in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.11<14>[ 53.281121] [IGT] kms_addfb_basic: exiting, ret=0 2-cip30-<8>[ 53.286895] rt17 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-0 [1mSubtest bad-pit<14>[ 53.307392] [IGT] kms_addfb_basic: executing ch-0: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_int<14>[ 53.318263] [IGT] kms_addfb_basic: starting subtest bad-pitch-128 el, file<14>[ 53.318367] [IGT] kms_addfb_basic: finished subtest bad-pitch-128, SUCCESS ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Te<14>[ 53.357134] [IGT] kms_addfb_basic: exiting, ret=0 st requirement: is_intel_device(fd) IGT-Version<8>[ 53.364803] : 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-32 [1mSubtest bad-pi<14>[ 53.390469] [IGT] kms_addfb_basic: executing tch-32: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, fi<14>[ 53.402168] [IGT] kms_addfb_basic: starting subtest bad-pitch-256 le ../li<14>[ 53.402288] [IGT] kms_addfb_basic: finished subtest bad-pitch-256, SUCCESS b/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_int<14>[ 53.442621] [IGT] kms_addfb_basic: exiting, ret=0 el_device(fd) IGT-Version: 1.28<8>[ 53.450163] -ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-63 [1mSubtest bad-pitch-63<14>[ 53.473595] [IGT] kms_addfb_basic: executing : SUCCESS (0.000s)[0m Test req<14>[ 53.483484] [IGT] kms_addfb_basic: starting subtest bad-pitch-1024 uirement<14>[ 53.483584] [IGT] kms_addfb_basic: finished subtest bad-pitch-1024, SUCCESS not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement n<14>[ 53.517926] [IGT] kms_addfb_basic: exiting, ret=0 ot met i<8>[ 53.523831] n function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-ci<14>[ 53.544432] [IGT] kms_addfb_basic: executing p30-rt17 aarch64) Using IGT_SRANDOM=1706305756 for rand<14>[ 53.556330] [IGT] kms_addfb_basic: starting subtest bad-pitch-999 omisatio<46>[ 53.556437] systemd-journald[127]: Data hash table of /var/log/journal/c3f909ee3e324895ab90ff2613af9260/system.journal has a fill level at 75.0 (1536 of 2047 items, 524288 file size, 341 bytes per hash table item), suggesting rotation. n Opene<46>[ 53.556446] systemd-journald[127]: /var/log/journal/c3f909ee3e324895ab90ff2613af9260/system.journal: Journal header limits reached or header out-of-date, rotating. d device: /dev/dri/card0 Starti<14>[ 53.601803] [IGT] kms_addfb_basic: finished subtest bad-pitch-999, SUCCESS ng subtest: bad-pitch-128 [1mSubtest bad-pitch-128: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_devic<14>[ 53.627872] [IGT] kms_addfb_basic: exiting, ret=0 e(fd) T<8>[ 53.632847] est requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test r<14>[ 53.649846] [IGT] kms_addfb_basic: executing equirement not met in function i<14>[ 53.659721] [IGT] kms_addfb_basic: starting subtest bad-pitch-65536 gt_requi<14>[ 53.659875] [IGT] kms_addfb_basic: finished subtest bad-pitch-65536, SUCCESS re_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting s<14>[ 53.693127] [IGT] kms_addfb_basic: exiting, ret=0 ubtest: <8>[ 53.698873] bad-pitch-256 [1mSubtest bad-pitch-256: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../<14>[ 53.718029] [IGT] kms_addfb_basic: executing lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not <14>[ 53.731641] [IGT] kms_addfb_basic: starting subtest invalid-get-prop-any met in f<14>[ 53.731747] [IGT] kms_addfb_basic: finished subtest invalid-get-prop-any, SUCCESS unction igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.<14>[ 53.766139] [IGT] kms_addfb_basic: exiting, ret=0 28-ga44e<8>[ 53.771846] bfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/d<14>[ 53.792265] [IGT] kms_addfb_basic: executing ri/card0 Starting subtest: bad-pitch-1024 [1mSubtest bad-pitch-1024: SUCCESS (0.000s)[0m Test requirement not met in functi<14>[ 53.806682] [IGT] kms_addfb_basic: starting subtest invalid-get-prop on igt_r<14>[ 53.806788] [IGT] kms_addfb_basic: finished subtest invalid-get-prop, SUCCESS equire_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_<14>[ 53.839355] [IGT] kms_addfb_basic: exiting, ret=0 device(f<8>[ 53.844522] d) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_devic<14>[ 53.863690] [IGT] kms_addfb_basic: executing e(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305756 for randomisation <14>[ 53.877856] [IGT] kms_addfb_basic: starting subtest invalid-set-prop-any Opened <14>[ 53.877960] [IGT] kms_addfb_basic: finished subtest invalid-set-prop-any, SUCCESS device: /dev/dri/card0 Starting subtest: bad-pitch-999 [1mSubtest bad-pitch-999: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Tes<14>[ 53.914116] [IGT] kms_addfb_basic: exiting, ret=0 t requir<8>[ 53.919885] ement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require<14>[ 53.940943] [IGT] kms_addfb_basic: executing _intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-V<14>[ 53.953434] [IGT] kms_addfb_basic: starting subtest invalid-set-prop ersion: <14>[ 53.953570] [IGT] kms_addfb_basic: finished subtest invalid-set-prop, SUCCESS 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-65536 [1mSubtest bad-p<14>[ 53.986287] [IGT] kms_addfb_basic: exiting, ret=0 itch-655<8>[ 53.992614] 36: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement no<14>[ 54.015673] [IGT] kms_addfb_basic: executing t met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met<14>[ 54.029602] [IGT] kms_addfb_basic: starting subtest master-rmfb in func<14>[ 54.029811] [IGT] kms_addfb_basic: finished subtest master-rmfb, SUCCESS tion igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is<14>[ 54.051033] [IGT] kms_addfb_basic: exiting, ret=0 _intel_d<8>[ 54.057317] evice(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Star<14>[ 54.079724] [IGT] kms_addfb_basic: executing ting subtest: invalid-get-prop-any [1mSubtest invalid-get-prop-any: SUCCESS (0.000s)[0m Test requirement not met in function<14>[ 54.095586] [IGT] kms_addfb_basic: starting subtest addfb25-modifier-no-flag igt_req<14>[ 54.095708] [IGT] kms_addfb_basic: finished subtest addfb25-modifier-no-flag, SUCCESS uire_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requ<14>[ 54.117452] [IGT] kms_addfb_basic: exiting, ret=0 irement <8>[ 54.122930] not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test r<14>[ 54.142729] [IGT] kms_addfb_basic: executing equirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version<14>[ 54.159619] [IGT] kms_addfb_basic: starting subtest addfb25-bad-modifier : 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-get-prop [1mSubtest invalid-get-prop: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-set-prop-any [1mSubtest invalid-set-prop-any: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-set-prop [1mSubtest invalid-set-prop: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: master-rmfb [1mSubtest master-rmfb: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Starting subtest: addfb25-modifier-no-flag [1mSubtest addfb25-modifier-no-flag: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Starting subtest: addfb25-bad-modifier (kms_addfb_basic:378) CRITICAL: Test assertion failure function addfb25_tests, file ../tests/kms_addfb_basic.c:714: (kms_addfb_basic:378) CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB8)) << 0) | ((((sizeof(struct drm_mode_fb_cmd2)))) << ((0+8)+8)))), (&f)) == -1 (kms_addfb_basic:378) CRITICAL: error: 0 != -1 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [+0xb1764358] #2 [+0xb1765fbc] #3 [+0xb176156c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xb17615b0] Subtest addfb25-bad-modifier failed. **** DEBUG **** (kms_addfb_basic:378) ioctl_wrappers-DEBUG: Tes<14>[ 54.514782] [IGT] kms_addfb_basic: finished subtest addfb25-bad-modifier, FAIL t requirement passed: igt_has_fb_modifiers(fd) (kms_addfb_basic:378) CRITICAL: Test assertion failure function addfb25_tests, file ../tests/kms_addfb_basic.c:714: (kms_addfb_basic:37<14>[ 54.540218] [IGT] kms_addfb_basic: exiting, ret=98 8) CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB8)) << 0) | ((((sizeof<8>[ 54.556021] (struct drm_mode_fb_cmd2)))) << ((0+8)+8)))), (&f)) == -1 (kms_addfb_basic:378) CRITICAL: error: 0 != -1 (kms_addfb_basic:378) igt_core-INFO: Stack trace: (kms_addfb_basic:378) igt_core-INFO: #0 ../lib/igt_core.<14>[ 54.580750] [IGT] kms_addfb_basic: executing c:1989 __igt_fail_assert() (kms_addfb_basic:378) igt_core-INFO: #1 [+0xb1764358] (kms_addfb_basic:378) igt_core-INFO: #2 [+0xb1765fbc] (kms_addfb_basic:378) igt_core-INFO: #3 [+0xb176156c] (kms_addfb_basic:378) igt_core-INFO: #4 [__libc_init_first+0x80] (kms_addfb_basic:378) igt_<14>[ 54.616096] [IGT] kms_addfb_basic: exiting, ret=77 core-INFO: #5 [__libc_start_ma<8>[ 54.623876] in+0x98] (kms_addfb_basic:378) igt_core-INFO: #6 [+0xb17615b0] **** END **** [1mSubtest addfb25-bad-modifier: FAIL (0.355s)[0m Test requirement not met in fu<14>[ 54.647991] [IGT] kms_addfb_basic: executing nction igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: <14>[ 54.685132] [IGT] kms_addfb_basic: exiting, ret=77 6.1.112-<8>[ 54.690821] cip30-rt17 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in <14>[ 54.709740] [IGT] kms_addfb_basic: executing function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest addfb25-x-tiled-mismatch-legacy: SKIP (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in fu<14>[ 54.743947] [IGT] kms_addfb_basic: exiting, ret=77 nction i<8>[ 54.749794] gt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.11<14>[ 54.768495] [IGT] kms_addfb_basic: executing 2-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest addfb25-x-tiled-legacy: SKIP (0.000s)[0m Test requirement not met in func<14>[ 54.801400] [IGT] kms_addfb_basic: exiting, ret=77 tion igt<8>[ 54.808795] _require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Versio<14>[ 54.834754] [IGT] kms_addfb_basic: executing n: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest addfb25-framebuffer-vs-set-tiling: SKIP (0.000s)[0m Test requirement not met in <14>[ 54.870536] [IGT] kms_addfb_basic: exiting, ret=77 function igt_require_intel, file<8>[ 54.878371] ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_de<14>[ 54.902866] [IGT] kms_addfb_basic: executing vice(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtes<14>[ 54.937670] [IGT] kms_addfb_basic: exiting, ret=77 t.c:880:<8>[ 54.943687] Test requirement: is_intel_device(fd) [1mSubtest basic-x-tiled-legacy: SKIP (0.000s)[0m Test requirement n<14>[ 54.963211] [IGT] kms_addfb_basic: executing ot met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: <14>[ 54.997506] [IGT] kms_addfb_basic: exiting, ret=77 is_intel<8>[ 55.003445] _device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requiremen<14>[ 55.024230] [IGT] kms_addfb_basic: executing t: is_intel_device(fd) [1mSubtest framebuffer-vs-set-tiling: SKIP (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /d<14>[ 55.056591] [IGT] kms_addfb_basic: starting subtest size-max ev/dri/c<14>[ 55.056710] [IGT] kms_addfb_basic: finished subtest size-max, SUCCESS ard0 Te<14>[ 55.057334] [IGT] kms_addfb_basic: exiting, ret=0 st requi<8>[ 55.062592] rement not met in functi<14>[ 55.086470] [IGT] kms_addfb_basic: executing on igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest tile-pitch-mismatch: SKIP (0.000s)[0m Test requirement not met in function igt_require<14>[ 55.119020] [IGT] kms_addfb_basic: starting subtest too-wide _intel, <14>[ 55.119137] [IGT] kms_addfb_basic: finished subtest too-wide, SUCCESS file ../<14>[ 55.119801] [IGT] kms_addfb_basic: exiting, ret=0 lib/drmt<8>[ 55.125296] est.c:880: Test<14>[ 55.147662] [IGT] kms_addfb_basic: executing requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_devic<14>[ 55.177706] [IGT] kms_addfb_basic: starting subtest too-high e(fd) T<14>[ 55.177840] [IGT] kms_addfb_basic: finished subtest too-high, SUCCESS est requ<14>[ 55.178496] [IGT] kms_addfb_basic: exiting, ret=0 irement <8>[ 55.183947] not met in funct<14>[ 55.207434] [IGT] kms_addfb_basic: executing ion igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest basic-y-tiled-legacy: SKIP (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6<14>[ 55.239119] [IGT] kms_addfb_basic: starting subtest bo-too-small .1.112-c<14>[ 55.239234] [IGT] kms_addfb_basic: finished subtest bo-too-small, SUCCESS ip30-rt1<14>[ 55.239916] [IGT] kms_addfb_basic: exiting, ret=0 7 aarch6<8>[ 55.245383] 4) Using IGT_SRANDOM=1706305758 for randomisati<14>[ 55.268969] [IGT] kms_addfb_basic: executing on Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Starting subtest: size-<14>[ 55.300741] [IGT] kms_addfb_basic: starting subtest small-bo max [1<14>[ 55.300869] [IGT] kms_addfb_basic: finished subtest small-bo, SUCCESS mSubtest<14>[ 55.301529] [IGT] kms_addfb_basic: exiting, ret=0 size-ma<8>[ 55.307028] x: SUCCESS (0.00<14>[ 55.331551] [IGT] kms_addfb_basic: executing 0s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in<14>[ 55.363366] [IGT] kms_addfb_basic: starting subtest bo-too-small-due-to-tiling functio<14>[ 55.363481] [IGT] kms_addfb_basic: finished subtest bo-too-small-due-to-tiling, SKIP n igt_re<14>[ 55.364137] [IGT] kms_addfb_basic: exiting, ret=77 quire_in<8>[ 55.369597] tel, fil<14>[ 55.387631] [IGT] kms_addfb_basic: executing e ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Starting subtest: too-wide [1mSubtest too-wide: SUCCESS (0.000s)[0m Test requirement not met in function igt_requ<14>[ 55.427498] [IGT] kms_addfb_basic: exiting, ret=77 ire_inte<8>[ 55.432497] l, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.1<14>[ 55.449383] [IGT] kms_addfb_basic: executing 12-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:<14>[ 55.481711] [IGT] kms_addfb_basic: exiting, ret=77 880: Te<8>[ 55.486977] st requirement: is_intel_device(fd) Starting subtest: too-high [1mSubtest too-high: SUCCESS (0.000s)[0m Test requir<14>[ 55.506459] [IGT] kms_addfb_basic: executing ement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function ig<14>[ 55.538707] [IGT] kms_addfb_basic: exiting, ret=77 t_requir<8>[ 55.544718] e_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: <14>[ 55.566436] [IGT] kms_addfb_basic: executing Test requirement: is_intel_device(fd) Starting subtest: bo-too-small [1mSubtest bo-too-small: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305758 for ran<14>[ 55.600419] [IGT] kms_addfb_basic: exiting, ret=77 domisati<8>[ 55.606257] on Open<8>[ 55.607840] ed device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: T<8>[ 55.630605] est requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Startin<14>[ 55.650162] [IGT] kms_atomic: executing g subtest: small-bo [1mSubtest small-bo: SUCCESS (0.000s)[0m Test requirement not me<14>[ 55.664122] [IGT] kms_atomic: starting subtest plane-overlay-legacy t in fun<14>[ 55.665274] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 ction igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Starting subtest: bo-too-small-due-to-tiling Test requirement not met in function igt_require_i915, file ../lib/drmtest.c:885: Test requirement: is_i915_device(fd) [1mSubtest bo-too-small-due-to-tiling: SKIP (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest addfb25-y-tiled-legacy: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest addfb25-yf-tiled-legacy: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in fu<14>[ 55.891377] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SUCCESS nction i<14>[ 55.891447] [IGT] kms_atomic: finished subtest plane-overlay-legacy, SUCCESS gt_requi<14>[ 55.891607] [IGT] kms_atomic: exiting, ret=0 re_intel<8>[ 55.897639] , file ../lib/drmtest.c:880: Te<14>[ 55.922238] [IGT] kms_atomic: executing st requirement: is_intel_device(fd) [1mSubtest addfb25-y-tiled-small-legacy: SKIP (0.0<14>[ 55.933564] [IGT] kms_atomic: starting subtest plane-primary-legacy 00s)[0m<14>[ 55.934646] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest addfb25-4-tiled: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-overlay-legacy Starting dynamic subtest: pipe-A-Writeback-1 [1mDynamic subtest pipe-A-Writeback-1: SUCCESS (0.220s)[0m [1mSubtest plane-overlay-legacy: SUCCESS (0.227s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-primary-legacy Starting dynamic subtest: pipe-A-Writeback-1 (kms_atomic:438) igt_kms-CRITICAL: Test assertion failure function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_atomic:438) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_atomic:438) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_atomic:438) igt_kms-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() #4 ../lib/igt_fb.c:2155 igt_create_fb() #5 ../lib/igt_fb.c:2268 igt_create_color_pattern_fb() #6 [+0xe7cd5cd0] #7 [+0xe7cd24b8] #8 [__libc_init_first+0x80] #9 [__libc_start_main+0x98] #10 [+0xe7cd24f0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_atomic:438) igt_kms-DEBUG: plane A.14: Setting property "SRC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.14: Setting property "SRC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.14: Setting property "SRC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.14: Setting property "SRC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.14: Setting property "CRTC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.14: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.14: Setting property "CRTC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.14: Setting property "CRTC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.14: Setting property "FB_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.14: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.14: Setting property "rotation" to 0x1/1 (kms_atomic:438) igt_kms-DEBUG: plane A.14: Setting property "COLOR_ENCODING" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.14: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.14: Setting property "pixel blend mode" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.14: Setting property "alpha" to 0xffff/65535 (kms_atomic:438) igt_kms-DEBUG: display: populating plane data: A.15, fb 0 (kms_atomic:438) igt_kms-DEBUG: plane A.15: Setting property "SRC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.15: Setting property "SRC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.15: Setting property "SRC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.15: Setting property "SRC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.15: Setting property "CRTC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.15: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.15: Setting property "CRTC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.15: Setting property "CRTC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.15: Setting property "FB_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.15: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.15: Setting property "rotation" to 0x1/1 (kms_atomic:438) igt_kms-DEBUG: plane A.15: Setting property "COLOR_ENCODING" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.15: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.15: Setting property "pixel blend mode" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.15: Setting property "alpha" to 0xffff/65535 (kms_atomic:438) igt_kms-DEBUG: display: populating plane data: A.16, fb 0 (kms_atomic:438) igt_kms-DEBUG: plane A.16: Setting property "SRC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.16: Setting property "SRC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.16: Setting property "SRC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.16: Setting property "SRC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.16: Setting property "CRTC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.16: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.16: Setting property "CRTC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.16: Setting property "CRTC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.16: Setting property "FB_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.16: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.16: Setting property "rotation" to 0x1/1 (kms_atomic:438) igt_kms-DEBUG: plane A.16: Setting property "COLOR_ENCODING" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.16: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.16: Setting property "pixel blend mode" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.16: Setting property "alpha" to 0xffff/65535 (kms_atomic:438) igt_kms-DEBUG: display: populating plane data: A.17, fb 0 (kms_atomic:438) igt_kms-DEBUG: plane A.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.17: Setting property "rotation" to 0x1/1 (kms_atomic:438) igt_kms-DEBUG: plane A.17: Setting property "COLOR_ENCODING" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.17: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.17: Setting property "pixel blend mode" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane A.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:438) igt_kms-DEBUG: Pipe B: Setting property "MODE_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: Pipe B: Setting property "ACTIVE" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: display: populating plane data: B.0, fb 0 (kms_atomic:438) igt_kms-DEBUG: plane B.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.0: Setting property "rotation" to 0x1/1 (kms_atomic:438) igt_kms-DEBUG: plane B.0: Setting property "COLOR_ENCODING" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.0: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.0: Setting property "pixel blend mode" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:438) igt_kms-DEBUG: display: populating plane data: B.17, fb 0 (kms_atomic:438) igt_kms-DEBUG: plane B.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.17: Setting property "rotation" to 0x1/1 (kms_atomic:438) igt_kms-DEBUG: plane B.17: Setting property "COLOR_ENCODING" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.17: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.17: Setting property "pixel blend mode" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane B.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:438) igt_kms-DEBUG: Pipe C: Setting property "MODE_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: Pipe C: Setting property "ACTIVE" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: display: populating plane data: C.0, fb 0 (kms_atomic:438) igt_kms-DEBUG: plane C.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.0: Setting property "rotation" to 0x1/1 (kms_atomic:438) igt_kms-DEBUG: plane C.0: Setting property "COLOR_ENCODING" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.0: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.0: Setting property "pixel blend mode" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:438) igt_kms-DEBUG: display: populating plane data: C.17, fb 0 (kms_atomic:438) igt_kms-DEBUG: plane C.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.17: Setting property "rotation" to 0x1/1 (kms_atomic:438) igt_kms-DEBUG: plane C.17: Setting property "COLOR_ENCODING" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.17: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.17: Setting property "pixel blend mode" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane C.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:438) igt_kms-DEBUG: Pipe D: Setting property "MODE_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: Pipe D: Setting property "ACTIVE" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: display: populating plane data: D.0, fb 0 (kms_atomic:438) igt_kms-DEBUG: plane D.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.0: Setting property "rotation" to 0x1/1 (kms_atomic:438) igt_kms-DEBUG: plane D.0: Setting property "COLOR_ENCODING" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.0: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.0: Setting property "pixel blend mode" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:438) igt_kms-DEBUG: display: populating plane data: D.17, fb 0 (kms_atomic:438) igt_kms-DEBUG: plane D.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.17: Setting property "rotation" to 0x1/1 (kms_atomic:438) igt_kms-DEBUG: plane D.17: Setting property "COLOR_ENCODING" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.17: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.17: Setting property "pixel blend mode" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane D.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:438) igt_kms-DEBUG: Pipe E: Setting property "MODE_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: Pipe E: Setting property "ACTIVE" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: display: populating plane data: E.0, fb 0 (kms_atomic:438) igt_kms-DEBUG: plane E.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.0: Setting property "rotation" to 0x1/1 (kms_atomic:438) igt_kms-DEBUG: plane E.0: Setting property "COLOR_<14>[ 57.437057] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, FAIL ENCODING<14>[ 57.437201] [IGT] kms_atomic: finished subtest plane-primary-legacy, FAIL " to 0x0<14>[ 57.444397] [IGT] kms_atomic: exiting, ret=98 /0 (kms<8>[ 57.455739] _atomic:438) igt_kms-DEBUG: plane E.0: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.0: Setti<14>[ 57.477827] [IGT] kms_atomic: executing ng property "pixel blend mode" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.0: Sett<14>[ 57.489455] [IGT] kms_atomic: starting subtest plane-primary-overlay-mutable-zpos ing property "alpha" to 0xffff/65535 (kms_atomic:438) igt_kms-DEBUG: display: populating plane data: E.17, fb 0 (kms_atomic:438) igt_kms-DEBUG: plane E.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.17: Setting property "rotation" to 0x1/1 (kms_atomic:438) igt_kms-DEBUG: plane E.17: Setting property "COLOR_ENCODING" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.17: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.17: Setting property "pixel blend mode" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: plane E.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:438) igt_kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: None (kms_atomic:438) i<14>[ 57.627462] [IGT] kms_atomic: finished subtest plane-primary-overlay-mutable-zpos, SKIP gt_kms-DEBUG: HDMI-A-1: <14>[ 57.631502] [IGT] kms_atomic: exiting, ret=77 Setting <8>[ 57.644111] property "CRTC_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: HDMI-A-1: Setting property "HDR_OUTPUT_METADATA" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: display: HDMI-A-2: preparing atomic, pipe: None (kms_atomic<14>[ 57.670148] [IGT] kms_atomic: executing :438) igt_kms-DEBUG: HDMI-A-2: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:438) igt<14>[ 57.681700] [IGT] kms_atomic: starting subtest plane-immutable-zpos _kms-DEB<14>[ 57.682803] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 UG: HDMI-A-2: Setting property "HDR_OUTPUT_METADATA" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: display: Writeback-1: preparing atomic, pipe: A (kms_atomic:438) igt_kms-DEBUG: Writeback-1: Setting property "CRTC_ID" to 0x38/56 (kms_atomic:438) igt_kms-DEBUG: Writeback-1: Setting property "WRITEBACK_FB_ID" to 0x0/0 (kms_atomic:438) igt_kms-DEBUG: display: } (kms_atomic:438) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=4096, height=2160, format=XR24(0x34325258), modifier=0x0, size=0) (kms_atomic:438) igt_kms-CRITICAL: Test assertion failure function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_atomic:438) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_atomic:438) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_atomic:438) igt_kms-CRITICAL: error: -1 != 0 (kms_atomic:438) igt_core-INFO: Stack trace: (kms_atomic:438) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_atomic:438) igt_core-INFO: #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() (kms_atomic:438) igt_core-INFO: #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() (kms_atomic:438) igt_core-INFO: #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() (kms_atomic:438) igt_core-INFO: #4 <14>[ 57.819638] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SKIP ../lib/igt_fb.c:<14>[ 57.819702] [IGT] kms_atomic: finished subtest plane-immutable-zpos, SKIP 2155 igt<14>[ 57.823701] [IGT] kms_atomic: exiting, ret=77 _create_<8>[ 57.834142] fb() (kms_atomic:438) igt_core-INFO: #5 ../lib/igt_fb.c:2268 igt_create_color_pattern_fb() (kms_atomic:438) igt_core<14>[ 57.858605] [IGT] kms_atomic: executing -INFO: #6 [+0xe7cd5cd0] (kms_atomic:438) igt_core-INFO: #7 [+0xe7<14>[ 57.870532] [IGT] kms_atomic: starting subtest test-only cd24b8] (kms_atomic:438) igt_core-INFO: #8 [__libc_init_first+0x80] (kms_atomic:438) igt_core-INFO: #9 [__libc_start_main+0x98] (kms_atomic:438) igt_core-INFO: #10 [+0xe7cd24f0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (1.502s)[0m [1mSubtest plane-primary-legacy: FAIL (1.504s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305760 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-primary-overlay-mutable-zpos No dynamic tests executed. [1mSubtest plane-primary-overlay-mutable-zpos: SKIP (0.138s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305760 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-immutable-zpos Starting dynamic subtest: pipe-A-Writeback-1 Test requirement not met in function igt_require_pipe_crc, file ../lib/igt_pipe_crc.c:211: Test requirement: fstatat(dir, "crtc-0/crc/control", &stat, 0) == 0 CRCs not supported on this platform Last errno: 2, No such file or directory [1mDynamic subtest pipe-A-Writeback-1: SKIP (0.137s)[0m No dynamic tests executed. [1mSubtest plane-immutable-zpos: SKIP (0.138s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305760 for randomisation Opened device: /dev/dri/card0 Starting subtest: test-only Starting dynamic subtest: pipe-A-Writeba<14>[ 58.017143] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 ck-1 [1mDynamic subtest pipe<14>[ 58.153150] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SUCCESS -A-Write<14>[ 58.153215] [IGT] kms_atomic: finished subtest test-only, SUCCESS back-1: <14>[ 58.153370] [IGT] kms_atomic: exiting, ret=0 SUCCESS <8>[ 58.160556] (0.136s)[0m [1mSubtest test-only: SUCCESS (0.283s)[0m IGT-Version: <14>[ 58.186427] [IGT] kms_atomic: executing 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=170630576<14>[ 58.198703] [IGT] kms_atomic: starting subtest plane-cursor-legacy 1 for ra<14>[ 58.199874] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 ndomisation Opened device: /dev/dri/card0 Starting subtest: plane-cursor-legacy Starting dynamic subtest: pipe-A-Writeback-1 [1mDynamic subtest pipe-A-Writeback-1: <14>[ 58.365125] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SUCCESS SUCCESS <14>[ 58.365200] [IGT] kms_atomic: finished subtest plane-cursor-legacy, SUCCESS (0.165s)<14>[ 58.365412] [IGT] kms_atomic: exiting, ret=0 [0m [<8>[ 58.371182] 1mSubtest plane-cursor-legacy: S<14>[ 58.397882] [IGT] kms_atomic: executing UCCESS (0.166s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aar<14>[ 58.409275] [IGT] kms_atomic: starting subtest plane-invalid-params ch64) U<14>[ 58.410446] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 sing IGT_SRANDOM=1706305761 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-invalid-params Starting dynamic subtest: pipe-A-Writeback-1 (kms_atomic:453) igt_kms-CRITICAL: Test assertion failure function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_atomic:453) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_atomic:453) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_atomic:453) igt_kms-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() #4 ../lib/igt_fb.c:2155 igt_create_fb() #5 ../lib/igt_fb.c:2226 igt_create_pattern_fb() #6 [+0xdc1354dc] #7 [+0xdc1324b8] #8 [__libc_init_first+0x80] #9 [__libc_start_main+0x98] #10 [+0xdc1324f0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_atomic:453) igt_kms-DEBUG: plane C.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane C.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane C.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane C.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane C.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane C.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane C.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane C.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane C.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane C.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane C.17: Setting property "rotation" to 0x1/1 (kms_atomic:453) igt_kms-DEBUG: plane C.17: Setting property "COLOR_ENCODING" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane C.17: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane C.17: Setting property "pixel blend mode" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane C.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:453) igt_kms-DEBUG: Pipe D: Setting property "MODE_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: Pipe D: Setting property "ACTIVE" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: display: populating plane data: D.0, fb 0 (kms_atomic:453) igt_kms-DEBUG: plane D.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.0: Setting property "rotation" to 0x1/1 (kms_atomic:453) igt_kms-DEBUG: plane D.0: Setting property "COLOR_ENCODING" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.0: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.0: Setting property "pixel blend mode" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:453) igt_kms-DEBUG: display: populating plane data: D.17, fb 0 (kms_atomic:453) igt_kms-DEBUG: plane D.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.17: Setting property "rotation" to 0x1/1 (kms_atomic:453) igt_kms-DEBUG: plane D.17: Setting property "COLOR_ENCODING" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.17: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.17: Setting property "pixel blend mode" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane D.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:453) igt_kms-DEBUG: Pipe E: Setting property "MODE_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: Pipe E: Setting property "ACTIVE" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: display: populating plane data: E.0, fb 0 (kms_atomic:453) igt_kms-DEBUG: plane E.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.0: Setting property "rotation" to 0x1/1 (kms_atomic:453) igt_kms-DEBUG: plane E.0: Setting property "COLOR_ENCODING" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.0: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.0: Setting property "pixel blend mode" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:453) igt_kms-DEBUG: display: populating plane data: E.17, fb 0 (kms_atomic:453) igt_kms-DEBUG: plane E.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.17: Setting property "rotation" to 0x1/1 (kms_atomic:453) igt_kms-DEBUG: plane E.17: Setting property "COLOR_ENCODING" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.17: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.17: Setting property "pixel blend mode" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane E.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:453) igt_kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: None (kms_atomic:453) igt_kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: HDMI-A-1: Setting property "HDR_OUTPUT_METADATA" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: display: HDMI-A-2: preparing atomic, pipe: None (kms_atomic:453) igt_kms-DEBUG: HDMI-A-2: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: HDMI-A-2: Setting property "HDR_OUTPUT_METADATA" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: display: Writeback-1: preparing atomic, pipe: A (kms_atomic:453) igt_kms-DEBUG: Writeback-1: Setting property "CRTC_ID" to 0x38/56 (kms_atomic:453) igt_kms-DEBUG: Writeback-1: Setting property "WRITEBACK_FB_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: display: } (kms_atomic:453) igt_kms-DEBUG: display: commit { (kms_atomic:453) igt_kms-DEBUG: display: populating plane data: A.0, fb 49 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x31/49 (kms_atomic:453) igt_kms-DEBUG: display: } (kms_atomic:453) igt_kms-DEBUG: display: commit { (kms_atomic:453) igt_kms-DEBUG: display: populating plane data: A.0, fb 56 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x38/56 (kms_atomic:453) igt_kms-DEBUG: display: } (kms_atomic:453) igt_kms-DEBUG: display: commit { (kms_atomic:453) igt_kms-DEBUG: display: populating plane data: A.0, fb 48 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x30/48 (kms_atomic:453) igt_kms-DEBUG: display: } (kms_atomic:453) igt_kms-DEBUG: display: commit { (kms_atomic:453) igt_kms-DEBUG: display: populating plane data: A.0, fb 236 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0xec/236 (kms_atomic:453) igt_kms-DEBUG: display: } (kms_atomic:453) igt_kms-DEBUG: display: commit { (kms_atomic:453) igt_kms-DEBUG: display: populating plane data: A.0, fb 0 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: display: } (kms_atomic:453) igt_kms-DEBUG: display: A.0: plane_set_fb(237) (kms_atomic:453) igt_kms-DEBUG: display: A.0: plane_set_size (4096x2160) (kms_atomic:453) igt_kms-DEBUG: display: A.0: fb_set_position(0,0) (kms_atomic:453) igt_kms-DEBUG: display: A.0: fb_set_size(4096x2160) (kms_atomic:453) igt_kms-DEBUG: display: commit { (kms_atomic:453) igt_kms-DEBUG: display: populating plane data: A.0, fb 237 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0x10000000/268435456 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x8700000/141557760 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0x1000/4096 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x870/2160 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0xed/237 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x38/56 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: display: } (kms_atomic:453) igt_kms-DEBUG: display: commit { (kms_atomic:453) igt_kms-DEBUG: display: populating plane data: A.0, fb 237 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x31/49 (kms_atomic:453) igt_kms-DEBUG: display: } (kms_atomic:453) igt_kms-DEBUG: display: commit { (kms_atomic:453) igt_kms-DEBUG: display: populating plane data: A.0, fb 237 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0xed/237 (kms_atomic:453) igt_kms-DEBUG: display: } (kms_atomic:453) igt_kms-DEBUG: display: commit { (kms_atomic:453) igt_kms-DEBUG: display: populat<14>[ 59.581844] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, FAIL ing plan<14>[ 59.581996] [IGT] kms_atomic: finished subtest plane-invalid-params, FAIL e data: <14>[ 59.588510] [IGT] kms_atomic: exiting, ret=98 A.0, fb <8>[ 59.599967] 237 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x30/48 (kms_atomic:453) igt_kms-DEBUG: display: <14>[ 59.622540] [IGT] kms_atomic: executing } (kms_atomic:453) igt_kms-DEBUG: display: commit { (kms_atomic:453) igt_kms-DEBUG: di<14>[ 59.634728] [IGT] kms_atomic: starting subtest plane-invalid-params-fence splay: <14>[ 59.635886] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 populating plane data: A.0, fb 237 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0xec/236 (kms_atomic:453) igt_kms-DEBUG: display: } (kms_atomic:453) igt_kms-DEBUG: display: commit { (kms_atomic:453) igt_kms-DEBUG: display: populating plane data: A.0, fb 237 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: display: } (kms_atomic:453) igt_kms-DEBUG: display: A.0: plane_set_fb(237) (kms_atomic:453) igt_kms-DEBUG: display: A.0: plane_set_size (4096x2160) (kms_atomic:453) igt_kms-DEBUG: display: A.0: fb_set_position(0,0) (kms_atomic:453) igt_kms-DEBUG: display: A.0: fb_set_size(4096x2160) (kms_atomic:453) igt_kms-DEBUG: display: commit { (kms_atomic:453) igt_kms-DEBUG: display: populating plane data: A.0, fb 237 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0x10000000/268435456 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x8700000/141557760 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0x1000/4096 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x870/2160 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0xed/237 (kms_atomic:453) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x38/56 <14>[ 59.783733] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SKIP (kms_ato<14>[ 59.783794] [IGT] kms_atomic: finished subtest plane-invalid-params-fence, SKIP mic:453)<14>[ 59.790589] [IGT] kms_atomic: exiting, ret=77 igt_kms<8>[ 59.797032] -DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1 (kms_atom<14>[ 59.817234] [IGT] kms_atomic: executing ic:453) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0 (kms_<14>[ 59.829570] [IGT] kms_atomic: starting subtest crtc-invalid-params atomic:4<14>[ 59.830735] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 53) igt_kms-DEBUG: display: } (kms_atomic:453) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=4095, height=2159, format=XR24(0x34325258), modifier=0x0, size=0) (kms_atomic:453) igt_kms-CRITICAL: Test assertion failure function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_atomic:453) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_atomic:453) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_atomic:453) igt_kms-CRITICAL: error: -1 != 0 (kms_atomic:453) igt_core-INFO: Stack trace: (kms_atomic:453) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_atomic:453) igt_core-INFO: #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() (kms_atomic:453) igt_core-INFO: #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() (kms_atomic:453) igt_core-INFO: #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() (kms_atomic:453) igt_core-INFO: #4 ../lib/igt_fb.c:2155 igt_create_fb() (kms_atomic:453) igt_core-INFO: #5 ../lib/igt_fb.c:2226 igt_create_pattern_fb() (kms_atomic:453) igt_core-INFO: #6 [+0xdc1354dc] (kms_atomic:453) igt_core-INFO: #7 [+0xdc1324b8] (kms_atomic:453) igt_core-INFO: #8 [__libc_init_first+0x80] (kms_atomic:453) igt_core-INFO: #9 [__libc_start_main+0x98] (kms_atomic:453) igt_core-INFO: #10 [+0xdc1324f0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (1.171s)[0m [1mSubtest plane-in<14>[ 59.984044] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SUCCESS valid-params: FAIL (1.17<14>[ 59.984111] [IGT] kms_atomic: finished subtest crtc-invalid-params, SUCCESS 3s)[0m <14>[ 59.984261] [IGT] kms_atomic: exiting, ret=0 IGT-Ver<8>[ 59.999472] sion: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305762 for rand<14>[ 60.023422] [IGT] kms_atomic: executing omisation Opened device: /dev/dri/card0 Starting subtest: plane-invalid-params-fence <14>[ 60.035220] [IGT] kms_atomic: starting subtest crtc-invalid-params-fence Starting<14>[ 60.036406] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 dynamic subtest: pipe-A-Writeback-1 Test requirement not met in function igt_require_sw_sync, file ../lib/sw_sync.c:265: Test requirement: kernel_has_sw_sync() Last errno: 2, No such file or directory [1mDynamic subtest pipe-A-Writeback-1: SKIP (0.148s)[0m No dynamic tests executed. [1mSubtest plane-invalid-params-fence: SKIP (0.149s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305762 for randomisation Opened device: /dev/dri/card0 Starting subtest: crtc-invalid-params Starting dynamic subtest: pipe-A-Writeback-1 [1mDynamic subtest pipe-A-Writeback-1: SUCCESS (0.153s)[0m [1mSubtest crtc-invalid-params: SUCCESS (0.154s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305763 for randomisation Opened device: /dev/dri/card0 Starting subtest: crtc-invalid-params-fence Starting dynamic subtest: pipe-A-Writeback-1 Test requirement not met in func<14>[ 60.186101] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SKIP tion igt<14>[ 60.186162] [IGT] kms_atomic: finished subtest crtc-invalid-params-fence, SKIP _require<14>[ 60.190188] [IGT] kms_atomic: exiting, ret=77 _sw_sync<8>[ 60.202328] , file ../lib/sw_sync.c:265: Test requirement: kernel_has_sw_sync() Last errno: 2, No such file or directory <14>[ 60.225735] [IGT] kms_atomic: executing [1mDynamic subtest pipe-A-Writeback-1: SKIP (0.134s)[0m No dynamic tests executed. <14>[ 60.238310] [IGT] kms_atomic: starting subtest atomic-invalid-params [1mSubte<14>[ 60.239461] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 st crtc-invalid-params-fence: SKIP (0.151s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305763 for randomisation Opened device: /dev/dri/card0 Starting subtest: atomic-invalid-params Starting dynamic subtest: pipe-A-Writeback-1 [1mDynamic subtest pipe-A-Write<14>[ 60.417510] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SUCCESS back-1: <14>[ 60.417593] [IGT] kms_atomic: finished subtest atomic-invalid-params, SUCCESS SUCCESS <14>[ 60.417779] [IGT] kms_atomic: exiting, ret=0 (0.178s)<8>[ 60.426605] [0m [1mSubtest atomic-invalid<14>[ 60.451540] [IGT] kms_atomic: executing -params: SUCCESS (0.179s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip3<14>[ 60.463422] [IGT] kms_atomic: starting subtest atomic-plane-damage 0-rt17 aarch64) Using IGT_SRANDOM=1706305763 for randomisation Opened device: /dev/dri/card0 Starting subtest: atomic-plane-damage No dynamic tests executed. [1m<14>[ 60.609212] [IGT] kms_atomic: finished subtest atomic-plane-damage, SKIP Subtest <14>[ 60.616009] [IGT] kms_atomic: exiting, ret=77 atomic-plane-damage: SKIP (0.146s)[0m <8>[ 60.629641] <8>[ 60.631034] <8>[ 60.652315] IGT-Vers<14>[ 60.671959] [IGT] kms_flip_event_leak: executing ion: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRAN<14>[ 60.683982] [IGT] kms_flip_event_leak: starting subtest basic DOM=1706<14>[ 60.685140] [IGT] kms_flip_event_leak: starting dynamic subtest pipe-A-Writeback-1 305763 for randomisation Opened device: /dev/dri/card0 Starting subtest: basic Starting dynamic subtest: pipe-A-Writeback-1 (kms_flip_event_leak:474) igt_kms-CRITICAL: Test assertion failure function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_flip_event_leak:474) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_flip_event_leak:474) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_flip_event_leak:474) igt_kms-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() #4 ../lib/igt_fb.c:2155 igt_create_fb() #5 [+0xbdfe1964] #6 [+0xbdfe146c] #7 [__libc_init_first+0x80] #8 [__libc_start_main+0x98] #9 [+0xbdfe14b0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "alpha" to 0xffff/65535 (kms_flip_event_leak:474) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:474) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_flip_event_leak:474) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:474) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_flip_event_leak:474) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:474) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_flip_event_leak:474) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:474) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_flip_event_leak:474) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:474) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_flip_event_leak:474) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:474) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_flip_event_leak:474) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:474) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_flip_event_leak:474) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:474) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_flip_event_leak:474) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_flip_event_leak:474) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:474) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_flip_event_leak:474) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:474) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_flip_event_leak:474) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_flip_event_leak:474) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:474) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_flip_event_leak:474) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:474) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_flip_event_leak:474) igt_kms-DEBUG: <14>[ 61.732450] [IGT] kms_flip_event_leak: finished subtest pipe-A-Writeback-1, FAIL display: SetCursor pipe C, d<14>[ 61.732599] [IGT] kms_flip_event_leak: finished subtest basic, FAIL isabling<14>[ 61.739676] [IGT] kms_flip_event_leak: exiting, ret=98 (kms_f<8>[ 61.753930] lip_even<8>[ 61.757096] t_leak:474) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_flip_event_leak:474) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_<8>[ 61.785280] flip_event_leak:474) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetCrtc pipe D, disab<14>[ 61.804564] [IGT] kms_prop_blob: executing ling (k<14>[ 61.804944] [IGT] kms_prop_blob: starting subtest basic ms_flip_<14>[ 61.805021] [IGT] kms_prop_blob: finished subtest basic, SUCCESS event_le<14>[ 61.805142] [IGT] kms_prop_blob: exiting, ret=0 ak:474) <8>[ 61.810562] igt_kms-<14>[ 61.832556] [IGT] kms_prop_blob: executing DEBUG: Test requirement passed: plane_idx >= 0 &<14>[ 61.845070] [IGT] kms_prop_blob: starting subtest blob-prop-core & plane_<14>[ 61.845155] [IGT] kms_prop_blob: finished subtest blob-prop-core, SUCCESS idx < pi<14>[ 61.845265] [IGT] kms_prop_blob: exiting, ret=0 pe->n_pl<8>[ 61.850618] anes (kms_flip_event_leak:474) <14>[ 61.877106] [IGT] kms_prop_blob: executing igt_kms-<14>[ 61.877481] [IGT] kms_prop_blob: starting subtest blob-prop-validate DEBUG: d<14>[ 61.877663] [IGT] kms_prop_blob: finished subtest blob-prop-validate, SUCCESS isplay: <14>[ 61.877783] [IGT] kms_prop_blob: exiting, ret=0 Fixi<8>[ 61.883559] ng up in<14>[ 61.905843] [IGT] kms_prop_blob: executing itial rotation p<14>[ 61.919499] [IGT] kms_prop_blob: starting subtest blob-prop-lifetime ipe D, p<14>[ 61.919663] [IGT] kms_prop_blob: finished subtest blob-prop-lifetime, SUCCESS lane 17 <14>[ 61.919741] [IGT] kms_prop_blob: exiting, ret=0 (kms_fl<8>[ 61.924912] ip_event_leak:474) igt_kms-DEBUG<14>[ 61.949746] [IGT] kms_prop_blob: executing : displa<14>[ 61.950064] [IGT] kms_prop_blob: starting subtest blob-multiple y: S<14>[ 61.950302] [IGT] kms_prop_blob: finished subtest blob-multiple, SUCCESS etCursor<14>[ 61.950377] [IGT] kms_prop_blob: exiting, ret=0 pipe D,<8>[ 61.955204] disabli<14>[ 61.971970] [IGT] kms_prop_blob: executing ng (kms_flip_event_leak<14>[ 61.990819] [IGT] kms_prop_blob: starting subtest invalid-get-prop-any :474) ig<14>[ 61.990894] [IGT] kms_prop_blob: finished subtest invalid-get-prop-any, SUCCESS t_kms-DE<14>[ 61.990979] [IGT] kms_prop_blob: exiting, ret=0 BUG: dis<8>[ 61.995671] play: <14>[ 62.013844] [IGT] kms_prop_blob: executing MoveCursor pipe D, (0, 0) (kms_flip_event_leak:474) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:474) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_flip_event_leak:474) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:474) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_flip_event_leak:474) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_flip_event_leak:474) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_flip_event_leak:474) igt_kms-DEBUG: display: } (kms_flip_event_leak:474) drmtest-DEBUG: Force option used: Using driver vc4 (kms_flip_event_leak:474) drmtest-DEBUG: Opened previously opened device: /dev/dri/card0 (kms_flip_event_leak:474) drmtest-DEBUG: Test requirement passed: !(fd<0) (kms_flip_event_leak:474) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=4096, height=2160, format=XR24(0x34325258), modifier=0x0, size=0) (kms_flip_event_leak:474) igt_kms-CRITICAL: Test assertion failure function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_flip_event_leak:474) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_flip_event_leak:474) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_flip_event_leak:474) igt_kms-CRITICAL: error: -1 != 0 (kms_flip_event_leak:474) igt_core-INFO: Stack trace: (kms_flip_event_leak:474) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_flip_event_leak:474) igt_core-INFO: #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() (kms_flip_event_leak:474) igt_core-INFO: #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() (kms_flip_event_leak:474) igt_core-INFO: #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() (kms_flip_event_leak:474) igt_core-INFO: #4 ../lib/igt_fb.c:2155 igt_create_fb() (kms_flip_event_leak:474) igt_core-INFO: #5 [+0xbdfe1964] (kms_flip_event_leak:474) igt_core-INFO: #6 [+0xbdfe146c] (kms_flip_event_leak:474) igt_core-INFO: #7 [__libc_init_first+0x80] (kms_flip_event_leak:474) igt_core-INFO: #8 [__libc_start_main+0x98] (kms_flip_event_leak:474) igt_core-INFO: #9 [+0xbdfe14b0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (1.033s)[0m [1mSubtest basic: FAIL (1.049s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305764 for randomisation Opened device: /dev/dri/card0 Starting subtest: basic [1mSubtest basic: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305764 for randomisation Opened device: /dev/dri/card0 Starting subtest: blob-prop-core [1mSubtest blob-prop-core: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305764 for randomisation Opened device: /dev/dri/card0 Starting subtest: blob-prop-validate [1mSubtest blob-prop-validate: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305764 for randomisation Opened device: /dev/dri/card0 Starting subtest: blob-prop-lifetime [1mSubtest blob-prop-lifetime: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305764 for randomisation Opened device: /dev/dri/card0 Starting subtest: blob-multiple [1mSubtest blob-multiple: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_S<14>[ 62.366463] [IGT] kms_prop_blob: starting subtest invalid-get-prop RANDOM=1<14>[ 62.366643] [IGT] kms_prop_blob: finished subtest invalid-get-prop, SUCCESS 70630576<14>[ 62.366853] [IGT] kms_prop_blob: exiting, ret=0 4 for ra<8>[ 62.372782] ndomisat<14>[ 62.389113] [IGT] kms_prop_blob: executing ion Opened device: /dev<14>[ 62.402592] [IGT] kms_prop_blob: starting subtest invalid-set-prop-any /dri/car<14>[ 62.402656] [IGT] kms_prop_blob: finished subtest invalid-set-prop-any, SUCCESS d0 Star<14>[ 62.402739] [IGT] kms_prop_blob: exiting, ret=0 ting sub<8>[ 62.407469] test: invalid-get-prop-a<14>[ 62.434085] [IGT] kms_prop_blob: executing ny [1m<14>[ 62.434400] [IGT] kms_prop_blob: starting subtest invalid-set-prop Subtest <14>[ 62.434460] [IGT] kms_prop_blob: finished subtest invalid-set-prop, SUCCESS invalid-<14>[ 62.434546] [IGT] kms_prop_blob: exiting, ret=0 get-prop<8>[ 62.439423] -any: SU<8>[ 62.440909] CCESS (0<8>[ 62.459856] .000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64)<14>[ 62.480583] [IGT] kms_setmode: executing (Linux:<14>[ 62.480967] [IGT] kms_setmode: starting subtest basic 6.1.112<14>[ 62.481107] [IGT] kms_setmode: finished subtest basic, SKIP -cip30-r<14>[ 62.481191] [IGT] kms_setmode: exiting, ret=77 t17 aarc<8>[ 62.486007] h64) Using IGT_SRANDOM=<14>[ 62.514710] [IGT] kms_setmode: executing 17063057<14>[ 62.515092] [IGT] kms_setmode: starting subtest basic-clone-single-crtc 65 for r<14>[ 62.515209] [IGT] kms_setmode: finished subtest basic-clone-single-crtc, SKIP andomisa<14>[ 62.515303] [IGT] kms_setmode: exiting, ret=77 tion Op<8>[ 62.519969] ened dev<14>[ 62.537198] [IGT] kms_setmode: executing ice: /dev/dri/card0 Starting subtest: invalid-g<14>[ 62.556735] [IGT] kms_setmode: starting subtest invalid-clone-single-crtc et-prop <14>[ 62.556855] [IGT] kms_setmode: finished subtest invalid-clone-single-crtc, SKIP [1mSub<14>[ 62.556937] [IGT] kms_setmode: exiting, ret=77 test inv<8>[ 62.561778] alid-get<14>[ 62.581984] [IGT] kms_setmode: executing -prop: S<14>[ 62.596139] [IGT] kms_setmode: starting subtest invalid-clone-exclusive-crtc UCCESS (<14>[ 62.596259] [IGT] kms_setmode: finished subtest invalid-clone-exclusive-crtc, SKIP 0.000s)<14>[ 62.596356] [IGT] kms_setmode: exiting, ret=77 [0m IGT<8>[ 62.608736] -Version: 1.28-g<14>[ 62.627564] [IGT] kms_setmode: executing a44ebfe <14>[ 62.627948] [IGT] kms_setmode: starting subtest clone-exclusive-crtc (aarch64<14>[ 62.628066] [IGT] kms_setmode: finished subtest clone-exclusive-crtc, SKIP ) (Linux<14>[ 62.628146] [IGT] kms_setmode: exiting, ret=77 : 6.1.11<8>[ 62.632986] 2-cip30-rt17 aarch64) U<14>[ 62.662840] [IGT] kms_setmode: executing sing IGT<14>[ 62.663217] [IGT] kms_setmode: starting subtest invalid-clone-single-crtc-stealing _SRANDOM<14>[ 62.663334] [IGT] kms_setmode: finished subtest invalid-clone-single-crtc-stealing, SKIP =1706305<14>[ 62.663411] [IGT] kms_setmode: exiting, ret=77 765 for <8>[ 62.668108] randomis<8>[ 62.669590] ation O<8>[ 62.687941] pened de<14>[ 62.707289] [IGT] kms_vblank: executing vice: /dev/dri/card0 Starting subtest: invalid-set-prop-any [1mSubtest invalid-set-prop-any: SUCCESS (0.000s)[0m IG<14>[ 62.727468] [IGT] kms_vblank: starting subtest invalid T-Versio<14>[ 62.728482] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 n: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-set-prop [1mSubtest invalid-set-prop: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: basic Testing: basic 1 connector combinations Testing: basic 2 connector combinations No dynamic tests executed. [1mSubtest basic: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: basic-clone-single-crtc Testing: basic-clone-single-crtc 2 connector combinations No dynamic tests executed. [1mSubtest basic-clone-single-crtc: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-clone-single-crtc Testing: invalid-clone-single-crtc 2 connector combinations No dynamic tests executed. [1mSubtest invalid-clone-single-crtc: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-clone-exclusive-crtc Testing: invalid-clone-exclusive-crtc 2 connector combinations No dynamic tests executed. [1mSubtest invalid-clone-exclusive-crtc: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: clone-exclusive-crtc Testing: clone-exclusive-crtc 2 connector combinations No dynamic tests executed. [1mSubtest clone-exclusive-crtc: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-clone-single-crtc-stealing Testing: invalid-clone-single-crtc-stealing 2 connector combinations No dynamic tests executed. [1mSubtest invalid-clone-single-crtc-stealing: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:531) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:531) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:531) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xc58d338c] #3 [+0xc58d1c78] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xc58d1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_ENCODING" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:531) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:531) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:531) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:531) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:531) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:531) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:531) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:531) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:531) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:531) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:531) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:531) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:531) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:531) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:531) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:531) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:531) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:531) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:531) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:531) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:531) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:531) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:531) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:531) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:531) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:531) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:531) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:531) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:531) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:531) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:531) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:531) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:531) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:531) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:531) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:531) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:531) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:531) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:531) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:531) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:531) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:531) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:531) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:531) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:531) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:531) igt_kms-DEBUG: display: SetC<14>[ 67.018500] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ursor pi<14>[ 67.018635] [IGT] kms_vblank: finished subtest invalid, FAIL pe D, di<14>[ 67.024905] [IGT] kms_vblank: exiting, ret=98 sabling <8>[ 67.033204] (kms_vblank:531) igt_kms-DEBUG: display: MoveCursor<14>[ 67.049312] [IGT] kms_vblank: executing pipe D, (0, 0) (kms_vblank:531) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0<14>[ 67.063008] [IGT] kms_vblank: starting subtest crtc-id && plan<14>[ 67.064094] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 e_idx < pipe->n_planes (kms_vblank:531) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:531) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:531) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:531) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:531) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:531) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:531) igt_kms-DEBUG: display: } (kms_vblank:531) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:531) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:531) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:531) igt_core-INFO: Stack trace: (kms_vblank:531) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:531) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:531) igt_core-INFO: #2 [+0xc58d338c] (kms_vblank:531) igt_core-INFO: #3 [+0xc58d1c78] (kms_vblank:531) igt_core-INFO: #4 [__libc_init_first+0x80] (kms_vblank:531) igt_core-INFO: #5 [__libc_start_main+0x98] (kms_vblank:531) igt_core-INFO: #6 [+0xc58d1cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.276s)[0m [1mSubtest invalid: FAIL (4.291s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305770 for randomisation Opened device: /dev/dri/card0 Starting subtest: crtc-id Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:534) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:534) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:534) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xc5a13728] #3 [+0xc5a11c78] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xc5a11cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_ENCODING" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:534) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:534) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:534) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:534) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:534) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:534) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:534) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:534) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:534) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:534) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:534) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:534) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:534) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:534) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:534) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:534) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:534) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:534) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:534) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:534) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:534) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:534) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:534) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:534) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:534) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:534) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:534) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:534) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:534) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:534) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:534) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:534) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:534) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:534) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:534) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:534) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:534) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:534) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:534) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:534) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:534) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:534) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:534) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:534) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:534) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:534) igt_kms-DEBUG: display: SetC<14>[ 71.114496] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ursor pi<14>[ 71.114639] [IGT] kms_vblank: finished subtest crtc-id, FAIL pe D, di<14>[ 71.120814] [IGT] kms_vblank: exiting, ret=98 sabling <8>[ 71.130497] (kms_vblank:534) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:534) igt_kms-DEBUG:<14>[ 71.151576] [IGT] kms_vblank: executing Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:534)<14>[ 71.163622] [IGT] kms_vblank: starting subtest accuracy-idle igt_kms<14>[ 71.164915] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 -DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:534) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:534) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:534) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:534) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:534) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:534) igt_kms-DEBUG: display: } (kms_vblank:534) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:534) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:534) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:534) igt_core-INFO: Stack trace: (kms_vblank:534) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:534) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:534) igt_core-INFO: #2 [+0xc5a13728] (kms_vblank:534) igt_core-INFO: #3 [+0xc5a11c78] (kms_vblank:534) igt_core-INFO: #4 [__libc_init_first+0x80] (kms_vblank:534) igt_core-INFO: #5 [__libc_start_main+0x98] (kms_vblank:534) igt_core-INFO: #6 [+0xc5a11cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.050s)[0m [1mSubtest crtc-id: FAIL (4.052s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305774 for randomisation Opened device: /dev/dri/card0 Starting subtest: accuracy-idle Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:537) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:537) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:537) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xe99d1f94] #3 [+0xe99d2fa0] #4 [+0xe99d31bc] #5 [+0xe99d1c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xe99d1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:537) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:537) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:537) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:537) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:537) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:537) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:537) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:537) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:537) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:537) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:537) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:537) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:537) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:537) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:537) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:537) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:537) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:537) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:537) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:537) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:537) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:537) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:537) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:537) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:537) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:537) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:537) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:537) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:537) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:537) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:537) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:537) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:537) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:537) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:537) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:537) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:537) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:537) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:537) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:537) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:537) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:537) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:537) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:537) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:537) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:537) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:537) igt_kms-DEBUG: display: MoveCu<14>[ 75.212644] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL rsor pip<14>[ 75.212789] [IGT] kms_vblank: finished subtest accuracy-idle, FAIL e D, (0,<14>[ 75.219853] [IGT] kms_vblank: exiting, ret=98 0) (kms_vblank:537) igt_kms-DEBUG: Tes<8>[ 75.240289] t requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:537) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:537) igt_kms-DEBUG: dis<14>[ 75.261583] [IGT] kms_vblank: executing play: SetCrtc pipe E, disabling (kms_vblank:537) igt_kms-DEBUG: Test requirement pa<14>[ 75.273077] [IGT] kms_vblank: starting subtest query-idle ssed: pl<14>[ 75.274216] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 ane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:537) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:537) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:537) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:537) igt_kms-DEBUG: display: } (kms_vblank:537) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:537) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:537) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:537) igt_core-INFO: Stack trace: (kms_vblank:537) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:537) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:537) igt_core-INFO: #2 [+0xe99d1f94] (kms_vblank:537) igt_core-INFO: #3 [+0xe99d2fa0] (kms_vblank:537) igt_core-INFO: #4 [+0xe99d31bc] (kms_vblank:537) igt_core-INFO: #5 [+0xe99d1c78] (kms_vblank:537) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:537) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:537) igt_core-INFO: #8 [+0xe99d1cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.034s)[0m [1mSubtest accuracy-idle: FAIL (4.049s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305778 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-idle Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:540) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:540) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:540) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xd1321f94] #3 [+0xd1322fa0] #4 [+0xd13231bc] #5 [+0xd1321c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xd1321cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:540) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:540) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:540) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:540) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:540) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:540) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:540) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:540) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:540) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:540) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:540) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:540) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:540) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:540) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:540) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:540) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:540) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:540) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:540) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:540) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:540) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:540) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:540) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:540) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:540) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:540) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:540) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:540) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:540) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:540) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:540) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:540) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:540) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:540) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:540) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:540) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:540) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:540) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:540) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:540) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:540) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:540) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:540) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:540) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:540) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:540) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:540) igt_kms-DEBUG: display: MoveCu<14>[ 79.308729] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL rsor pipe D, (0, 0) (kms_vblank:540) ig<14>[ 79.308873] [IGT] kms_vblank: finished subtest query-idle, FAIL t_kms-DE<14>[ 79.316257] [IGT] kms_vblank: exiting, ret=98 BUG: Tes<8>[ 79.330319] t requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:540) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plan<14>[ 79.355298] [IGT] kms_vblank: executing e 0 (kms_vblank:540) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank<14>[ 79.367064] [IGT] kms_vblank: starting subtest query-idle-hang :540) ig<14>[ 79.367188] [IGT] kms_vblank: finished subtest query-idle-hang, SKIP t_kms-DE<14>[ 79.367339] [IGT] kms_vblank: exiting, ret=77 BUG: Tes<8>[ 79.372858] t requir<14>[ 79.396052] [IGT] kms_vblank: executing ement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:540) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:540) igt_kms-DEBUG: di<14>[ 79.413128] [IGT] kms_vblank: starting subtest query-forked splay: <14>[ 79.414196] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 SetCursor pipe E, disabling (kms_vblank:540) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:540) igt_kms-DEBUG: display: } (kms_vblank:540) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:540) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:540) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:540) igt_core-INFO: Stack trace: (kms_vblank:540) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:540) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:540) igt_core-INFO: #2 [+0xd1321f94] (kms_vblank:540) igt_core-INFO: #3 [+0xd1322fa0] (kms_vblank:540) igt_core-INFO: #4 [+0xd13231bc] (kms_vblank:540) igt_core-INFO: #5 [+0xd1321c78] (kms_vblank:540) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:540) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:540) igt_core-INFO: #8 [+0xd1321cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.034s)[0m [1mSubtest query-idle: FAIL (4.036s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305782 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-idle-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest query-idle-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305782 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-forked Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:546) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:546) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:546) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xdf6e1f94] #3 [+0xdf6e2fa0] #4 [+0xdf6e31bc] #5 [+0xdf6e1c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xdf6e1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:546) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:546) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:546) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:546) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:546) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:546) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:546) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:546) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:546) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:546) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:546) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:546) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:546) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:546) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:546) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:546) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:546) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:546) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:546) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:546) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:546) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:546) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:546) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:546) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:546) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:546) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:546) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:546) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:546) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:546) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:546) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:546) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:546) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:546) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:546) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:546) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:546) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:546) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:546) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:546) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:546) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:546) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:546) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:546) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:546) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:546) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:546) igt_kms-DEBUG: display: MoveCu<14>[ 83.660645] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL rsor pip<14>[ 83.660789] [IGT] kms_vblank: finished subtest query-forked, FAIL e D, (0,<14>[ 83.667781] [IGT] kms_vblank: exiting, ret=98 0) (kms_vblank:546) igt_kms-DEBUG: Tes<8>[ 83.687429] t requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:546) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:546) igt_kms-DEBUG: dis<14>[ 83.708775] [IGT] kms_vblank: executing play: SetCrtc pipe E, disabling (kms_vblank:546) igt_kms-DEBUG: Tes<14>[ 83.720520] [IGT] kms_vblank: starting subtest query-forked-hang t requir<14>[ 83.720647] [IGT] kms_vblank: finished subtest query-forked-hang, SKIP ement pa<14>[ 83.720796] [IGT] kms_vblank: exiting, ret=77 ssed: pl<8>[ 83.726400] ane_idx >= 0 && plane_id<14>[ 83.750974] [IGT] kms_vblank: executing x < pipe->n_planes (kms_vblank:546) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:546) i<14>[ 83.764672] [IGT] kms_vblank: starting subtest query-busy gt_kms-D<14>[ 83.765759] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 EBUG: display: SetCursor pipe E, disabling (kms_vblank:546) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:546) igt_kms-DEBUG: display: } (kms_vblank:546) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:546) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:546) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:546) igt_core-INFO: Stack trace: (kms_vblank:546) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:546) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:546) igt_core-INFO: #2 [+0xdf6e1f94] (kms_vblank:546) igt_core-INFO: #3 [+0xdf6e2fa0] (kms_vblank:546) igt_core-INFO: #4 [+0xdf6e31bc] (kms_vblank:546) igt_core-INFO: #5 [+0xdf6e1c78] (kms_vblank:546) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:546) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:546) igt_core-INFO: #8 [+0xdf6e1cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.246s)[0m [1mSubtest query-forked: FAIL (4.248s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305786 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-forked-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest query-forked-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305786 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-busy Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:552) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:552) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:552) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xe9a71f94] #3 [+0xe9a72fa0] #4 [+0xe9a731bc] #5 [+0xe9a71c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xe9a71cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:552) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:552) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:552) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:552) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:552) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:552) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:552) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:552) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:552) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:552) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:552) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:552) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:552) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:552) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:552) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:552) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:552) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:552) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:552) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:552) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:552) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:552) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:552) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:552) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:552) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:552) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:552) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:552) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:552) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:552) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:552) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:552) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:552) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:552) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:552) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:552) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:552) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:552) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:552) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:552) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:552) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:552) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:552) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:552) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:552) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:552) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:552) igt_kms-DEBUG: display: MoveCu<14>[ 88.012628] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL rsor pip<14>[ 88.012769] [IGT] kms_vblank: finished subtest query-busy, FAIL e D, (0, 0) (km<14>[ 88.019660] [IGT] kms_vblank: exiting, ret=98 s_vblank:552) igt_kms-DEBUG: Test requir<8>[ 88.038410] ement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:552) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:552) igt_kms-DEBUG: display: <14>[ 88.060722] [IGT] kms_vblank: executing SetCrtc pipe E, disabling (kms_vblank:552) igt_kms-DEBUG: Test requirement passed: pl<14>[ 88.072473] [IGT] kms_vblank: starting subtest query-busy-hang ane_idx <14>[ 88.072598] [IGT] kms_vblank: finished subtest query-busy-hang, SKIP >= 0 && <14>[ 88.072747] [IGT] kms_vblank: exiting, ret=77 plane_id<8>[ 88.078210] x < pipe<14>[ 88.104288] [IGT] kms_vblank: executing ->n_planes (kms_vblank:552) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:552) igt_kms-DEBUG: display: SetCursor pipe E, disabling <14>[ 88.121061] [IGT] kms_vblank: starting subtest query-forked-busy (kms_vbl<14>[ 88.122076] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 ank:552) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:552) igt_kms-DEBUG: display: } (kms_vblank:552) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:552) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:552) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:552) igt_core-INFO: Stack trace: (kms_vblank:552) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:552) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:552) igt_core-INFO: #2 [+0xe9a71f94] (kms_vblank:552) igt_core-INFO: #3 [+0xe9a72fa0] (kms_vblank:552) igt_core-INFO: #4 [+0xe9a731bc] (kms_vblank:552) igt_core-INFO: #5 [+0xe9a71c78] (kms_vblank:552) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:552) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:552) igt_core-INFO: #8 [+0xe9a71cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.247s)[0m [1mSubtest query-busy: FAIL (4.248s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305791 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-busy-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest query-busy-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305791 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-forked-busy Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:558) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:558) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:558) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xbd721f94] #3 [+0xbd722fa0] #4 [+0xbd7231bc] #5 [+0xbd721c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xbd721cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:558) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:558) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:558) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:558) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:558) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:558) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:558) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:558) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:558) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:558) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:558) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:558) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:558) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:558) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:558) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:558) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:558) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:558) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:558) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:558) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:558) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:558) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:558) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:558) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:558) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:558) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:558) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:558) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:558) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:558) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:558) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:558) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:558) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:558) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:558) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:558) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:558) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:558) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:558) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:558) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:558) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:558) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:558) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:558) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:558) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:558) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:558) igt_kms-DEBUG: display: MoveCu<14>[ 92.364649] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL rsor pip<14>[ 92.364793] [IGT] kms_vblank: finished subtest query-forked-busy, FAIL e D, (0,<14>[ 92.371810] [IGT] kms_vblank: exiting, ret=98 0) (kms_vblank:558) igt_kms-DEBUG: Tes<8>[ 92.391924] t requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:558) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:558) igt_kms-DE<14>[ 92.413306] [IGT] kms_vblank: executing BUG: display: SetCrtc pipe E, disabling (kms_vblank:558) igt_kms-DE<14>[ 92.424943] [IGT] kms_vblank: starting subtest query-forked-busy-hang BUG: Tes<14>[ 92.425069] [IGT] kms_vblank: finished subtest query-forked-busy-hang, SKIP t requir<14>[ 92.425212] [IGT] kms_vblank: exiting, ret=77 ement pa<8>[ 92.430800] ssed: plane_idx >= 0 && plane_idx < pipe->n_plan<14>[ 92.456501] [IGT] kms_vblank: executing es (kms_vblank:558) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plan<14>[ 92.469178] [IGT] kms_vblank: starting subtest wait-idle e 17 (k<14>[ 92.470266] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 ms_vblank:558) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:558) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:558) igt_kms-DEBUG: display: } (kms_vblank:558) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:558) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:558) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:558) igt_core-INFO: Stack trace: (kms_vblank:558) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:558) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:558) igt_core-INFO: #2 [+0xbd721f94] (kms_vblank:558) igt_core-INFO: #3 [+0xbd722fa0] (kms_vblank:558) igt_core-INFO: #4 [+0xbd7231bc] (kms_vblank:558) igt_core-INFO: #5 [+0xbd721c78] (kms_vblank:558) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:558) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:558) igt_core-INFO: #8 [+0xbd721cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.242s)[0m [1mSubtest query-forked-busy: FAIL (4.244s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305795 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-forked-busy-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest query-forked-busy-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305795 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-idle Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:564) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:564) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:564) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xdab91f94] #3 [+0xdab92fa0] #4 [+0xdab931bc] #5 [+0xdab91c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xdab91cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:564) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:564) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:564) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:564) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:564) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:564) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:564) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:564) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:564) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:564) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:564) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:564) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:564) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:564) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:564) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:564) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:564) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:564) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:564) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:564) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:564) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:564) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:564) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:564) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:564) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:564) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:564) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:564) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:564) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:564) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:564) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:564) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:564) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:564) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:564) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:564) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:564) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:564) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:564) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:564) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:564) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:564) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:564) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:564) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:564) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:564) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:564) igt_kms-DEBUG: display: MoveCu<14>[ 96.716635] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL rsor pip<14>[ 96.716777] [IGT] kms_vblank: finished subtest wait-idle, FAIL e D, (0,<14>[ 96.723700] [IGT] kms_vblank: exiting, ret=98 0) (kms_vblank:564) igt_kms-DE<8>[ 96.742507] BUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:564) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plan<14>[ 96.764091] [IGT] kms_vblank: executing e 0 (kms_vblank:564) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:564) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms<14>[ 96.781689] [IGT] kms_vblank: starting subtest wait-idle-hang _vblank:<14>[ 96.781821] [IGT] kms_vblank: finished subtest wait-idle-hang, SKIP 564) igt<14>[ 96.781975] [IGT] kms_vblank: exiting, ret=77 _kms-DEB<8>[ 96.787727] UG: disp<14>[ 96.812004] [IGT] kms_vblank: executing lay: Fixing up initial rotation pipe E, plane 17 (kms_vblank:564) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:564) igt_kms-DEBUG: display: MoveCursor <14>[ 96.830817] [IGT] kms_vblank: starting subtest wait-forked pipe E, <14>[ 96.831830] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 (0, 0) (kms_vblank:564) igt_kms-DEBUG: display: } (kms_vblank:564) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:564) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:564) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:564) igt_core-INFO: Stack trace: (kms_vblank:564) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:564) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:564) igt_core-INFO: #2 [+0xdab91f94] (kms_vblank:564) igt_core-INFO: #3 [+0xdab92fa0] (kms_vblank:564) igt_core-INFO: #4 [+0xdab931bc] (kms_vblank:564) igt_core-INFO: #5 [+0xdab91c78] (kms_vblank:564) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:564) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:564) igt_core-INFO: #8 [+0xdab91cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.246s)[0m [1mSubtest wait-idle: FAIL (4.247s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305799 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-idle-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest wait-idle-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305799 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-forked Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:570) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:570) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:570) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xb36a1f94] #3 [+0xb36a2fa0] #4 [+0xb36a31bc] #5 [+0xb36a1c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xb36a1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:570) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:570) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:570) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:570) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:570) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:570) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:570) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:570) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:570) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:570) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:570) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:570) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:570) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:570) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:570) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:570) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:570) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:570) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:570) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:570) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:570) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:570) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:570) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:570) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:570) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:570) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:570) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:570) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:570) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:570) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:570) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:570) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:570) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:570) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:570) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:570) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:570) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:570) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:570) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:570) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:570) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:570) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:570) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:570) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:570) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:570) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:570) igt_kms-DEBUG: display: MoveCu<14>[ 101.068620] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL rsor pip<14>[ 101.068765] [IGT] kms_vblank: finished subtest wait-forked, FAIL e D, (0,<14>[ 101.075759] [IGT] kms_vblank: exiting, ret=98 0) (kms_vblank:570) igt_kms-DEBUG: Test requir<8>[ 101.095383] ement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:570) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:570) igt_kms-DEBUG: display: <14>[ 101.116981] [IGT] kms_vblank: executing SetCrtc pipe E, disabling (kms_vblank:570) igt_kms-DEBUG: Tes<14>[ 101.128561] [IGT] kms_vblank: starting subtest wait-forked-hang t requir<14>[ 101.128686] [IGT] kms_vblank: finished subtest wait-forked-hang, SKIP ement pa<14>[ 101.128837] [IGT] kms_vblank: exiting, ret=77 ssed: pl<8>[ 101.134428] ane_idx >= 0 && plane_id<14>[ 101.158521] [IGT] kms_vblank: executing x < pipe->n_planes (kms_vblank:570) igt_kms-DEBUG: display: Fixing up initial rotat<14>[ 101.172180] [IGT] kms_vblank: starting subtest wait-busy ion pipe<14>[ 101.173299] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 E, plane 17 (kms_vblank:570) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:570) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:570) igt_kms-DEBUG: display: } (kms_vblank:570) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:570) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:570) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:570) igt_core-INFO: Stack trace: (kms_vblank:570) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:570) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:570) igt_core-INFO: #2 [+0xb36a1f94] (kms_vblank:570) igt_core-INFO: #3 [+0xb36a2fa0] (kms_vblank:570) igt_core-INFO: #4 [+0xb36a31bc] (kms_vblank:570) igt_core-INFO: #5 [+0xb36a1c78] (kms_vblank:570) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:570) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:570) igt_core-INFO: #8 [+0xb36a1cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.237s)[0m [1mSubtest wait-forked: FAIL (4.238s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305804 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-forked-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest wait-forked-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305804 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-busy Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:576) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:576) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:576) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xd1561f94] #3 [+0xd1562fa0] #4 [+0xd15631bc] #5 [+0xd1561c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xd1561cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:576) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:576) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:576) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:576) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:576) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:576) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:576) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:576) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:576) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:576) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:576) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:576) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:576) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:576) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:576) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:576) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:576) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:576) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:576) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:576) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:576) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:576) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:576) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:576) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:576) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:576) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:576) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:576) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:576) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:576) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:576) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:576) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:576) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:576) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:576) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:576) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:576) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:576) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:576) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:576) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:576) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:576) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:576) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:576) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:576) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:576) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:576) igt_kms-DEBUG: display: MoveCu<14>[ 105.420622] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL rsor pip<14>[ 105.420764] [IGT] kms_vblank: finished subtest wait-busy, FAIL e D, (0,<14>[ 105.427743] [IGT] kms_vblank: exiting, ret=98 0) (kms_vblank:576) igt_kms-DE<8>[ 105.446517] BUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:576) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:576) igt_kms-DEBUG: display: <14>[ 105.468465] [IGT] kms_vblank: executing SetCrtc pipe E, disabling (kms_vblank:576) ig<14>[ 105.480232] [IGT] kms_vblank: starting subtest wait-busy-hang t_kms-DEBUG: Tes<14>[ 105.487377] [IGT] kms_vblank: finished subtest wait-busy-hang, SKIP t requir<14>[ 105.487531] [IGT] kms_vblank: exiting, ret=77 ement pa<8>[ 105.493130] ssed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:576) igt_kms-DEBUG: disp<14>[ 105.513961] [IGT] kms_vblank: executing lay: Fixing up initial rotation pipe E, plane 17 (kms_vblank:576) igt_kms-DEBUG: di<14>[ 105.525564] [IGT] kms_vblank: starting subtest wait-forked-busy splay: <14>[ 105.526717] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 SetCursor pipe E, disabling (kms_vblank:576) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:576) igt_kms-DEBUG: display: } (kms_vblank:576) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:576) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:576) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:576) igt_core-INFO: Stack trace: (kms_vblank:576) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:576) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:576) igt_core-INFO: #2 [+0xd1561f94] (kms_vblank:576) igt_core-INFO: #3 [+0xd1562fa0] (kms_vblank:576) igt_core-INFO: #4 [+0xd15631bc] (kms_vblank:576) igt_core-INFO: #5 [+0xd1561c78] (kms_vblank:576) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:576) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:576) igt_core-INFO: #8 [+0xd1561cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.242s)[0m [1mSubtest wait-busy: FAIL (4.248s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305808 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-busy-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest wait-busy-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305808 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-forked-busy Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:582) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:582) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:582) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xc9381f94] #3 [+0xc9382fa0] #4 [+0xc93831bc] #5 [+0xc9381c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xc9381cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:582) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:582) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:582) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:582) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:582) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:582) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:582) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:582) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:582) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:582) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:582) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:582) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:582) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:582) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:582) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:582) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:582) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:582) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:582) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:582) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:582) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:582) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:582) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:582) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:582) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:582) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:582) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:582) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:582) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:582) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:582) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:582) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:582) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:582) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:582) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:582) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:582) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:582) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:582) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:582) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:582) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:582) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:582) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:582) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:582) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:582) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:582) igt_kms-DEBUG: display: MoveCu<14>[ 109.772716] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL rsor pipe D, (0, 0) (kms_vblank<14>[ 109.772861] [IGT] kms_vblank: finished subtest wait-forked-busy, FAIL :582) ig<14>[ 109.779859] [IGT] kms_vblank: exiting, ret=98 t_kms-DE<8>[ 109.793411] BUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:582) igt_kms-DEBUG: display: Fixing up initial rotation pipe<14>[ 109.818980] [IGT] kms_vblank: executing E, plane 0 (kms_vblank:582) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (km<14>[ 109.830951] [IGT] kms_vblank: starting subtest wait-forked-busy-hang s_vblank<14>[ 109.831075] [IGT] kms_vblank: finished subtest wait-forked-busy-hang, SKIP :582) ig<14>[ 109.831214] [IGT] kms_vblank: exiting, ret=77 t_kms-DE<8>[ 109.836717] BUG: Test requirement passed: pl<14>[ 109.862033] [IGT] kms_vblank: executing ane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:582) igt_kms-DEBUG: display: <14>[ 109.874801] [IGT] kms_vblank: starting subtest ts-continuation-idle Fixing <14>[ 109.876032] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 up initial rotation pipe E, plane 17 (kms_vblank:582) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:582) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:582) igt_kms-DEBUG: display: } (kms_vblank:582) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:582) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:582) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:582) igt_core-INFO: Stack trace: (kms_vblank:582) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:582) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:582) igt_core-INFO: #2 [+0xc9381f94] (kms_vblank:582) igt_core-INFO: #3 [+0xc9382fa0] (kms_vblank:582) igt_core-INFO: #4 [+0xc93831bc] (kms_vblank:582) igt_core-INFO: #5 [+0xc9381c78] (kms_vblank:582) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:582) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:582) igt_core-INFO: #8 [+0xc9381cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.246s)[0m [1mSubtest wait-forked-busy: FAIL (4.247s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305812 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-forked-busy-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest wait-forked-busy-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305812 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-idle Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:588) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:588) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:588) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xbe2b1f94] #3 [+0xbe2b2fa0] #4 [+0xbe2b31bc] #5 [+0xbe2b1c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xbe2b1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:588) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:588) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:588) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:588) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:588) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:588) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:588) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:588) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:588) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:588) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:588) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:588) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:588) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:588) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:588) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:588) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:588) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:588) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:588) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:588) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:588) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:588) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:588) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:588) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:588) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:588) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:588) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:588) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:588) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:588) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:588) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:588) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:588) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:588) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:588) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:588) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:588) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:588) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:588) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:588) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:588) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:588) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:588) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:588) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:588) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:588) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:588) igt_kms-DEBUG: display: MoveCu<14>[ 114.124627] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL rsor pip<14>[ 114.124770] [IGT] kms_vblank: finished subtest ts-continuation-idle, FAIL e D, (0,<14>[ 114.131676] [IGT] kms_vblank: exiting, ret=98 0) (kms_vblank:588) igt_kms-DE<8>[ 114.152208] BUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:588) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:588) ig<14>[ 114.173409] [IGT] kms_vblank: executing t_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:588) ig<14>[ 114.184876] [IGT] kms_vblank: starting subtest ts-continuation-idle-hang t_kms-DE<14>[ 114.184998] [IGT] kms_vblank: finished subtest ts-continuation-idle-hang, SKIP BUG: Tes<14>[ 114.185139] [IGT] kms_vblank: exiting, ret=77 t requir<8>[ 114.190663] ement passed: plane_idx >= 0 && plane_id<14>[ 114.217076] [IGT] kms_vblank: executing x < pipe->n_planes (kms_vblank:588) igt_kms-DEBUG: display: Fixing up initial rotat<14>[ 114.229153] [IGT] kms_vblank: starting subtest ts-continuation-dpms-rpm ion pipe<14>[ 114.230224] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 E, plane 17 (kms_vblank:588) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:588) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:588) igt_kms-DEBUG: display: } (kms_vblank:588) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:588) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:588) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:588) igt_core-INFO: Stack trace: (kms_vblank:588) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:588) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:588) igt_core-INFO: #2 [+0xbe2b1f94] (kms_vblank:588) igt_core-INFO: #3 [+0xbe2b2fa0] (kms_vblank:588) igt_core-INFO: #4 [+0xbe2b31bc] (kms_vblank:588) igt_core-INFO: #5 [+0xbe2b1c78] (kms_vblank:588) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:588) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:588) igt_core-INFO: #8 [+0xbe2b1cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.248s)[0m [1mSubtest ts-continuation-idle: FAIL (4.250s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305817 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-idle-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest ts-continuation-idle-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305817 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-dpms-rpm Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:594) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:594) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:594) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xcb401f94] #3 [+0xcb402fa0] #4 [+0xcb4031bc] #5 [+0xcb401c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xcb401cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:594) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:594) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:594) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:594) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:594) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:594) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:594) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:594) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:594) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:594) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:594) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:594) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:594) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:594) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:594) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:594) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:594) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:594) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:594) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:594) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:594) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:594) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:594) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:594) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:594) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:594) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:594) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:594) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:594) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:594) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:594) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:594) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:594) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:594) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:594) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:594) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:594) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:594) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:594) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:594) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:594) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:594) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:594) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:594) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:594) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:594) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:594) igt_kms-DEBUG: display: MoveCu<14>[ 118.476668] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL rsor pipe D, (0, 0) (kms_vblank<14>[ 118.476809] [IGT] kms_vblank: finished subtest ts-continuation-dpms-rpm, FAIL :594) ig<14>[ 118.483743] [IGT] kms_vblank: exiting, ret=98 t_kms-DE<8>[ 118.497012] BUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:594) igt_kms-DEBUG: display: Fixing up initi<14>[ 118.522501] [IGT] kms_vblank: executing al rotation pipe E, plane 0 (kms_vblank:594) igt_kms-DEBUG: display: SetCrtc pipe E<14>[ 118.534593] [IGT] kms_vblank: starting subtest ts-continuation-dpms-suspend , disabl<14>[ 118.535754] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 ing (kms_vblank:594) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:594) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:594) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:594) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:594) igt_kms-DEBUG: display: } (kms_vblank:594) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:594) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:594) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:594) igt_core-INFO: Stack trace: (kms_vblank:594) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:594) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:594) igt_core-INFO: #2 [+0xcb401f94] (kms_vblank:594) igt_core-INFO: #3 [+0xcb402fa0] (kms_vblank:594) igt_core-INFO: #4 [+0xcb4031bc] (kms_vblank:594) igt_core-INFO: #5 [+0xcb401c78] (kms_vblank:594) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:594) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:594) igt_core-INFO: #8 [+0xcb401cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.246s)[0m [1mSubtest ts-continuation-dpms-rpm: FAIL (4.248s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305821 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-dpms-suspend Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:597) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:597) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:597) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xd87e1f94] #3 [+0xd87e2fa0] #4 [+0xd87e31bc] #5 [+0xd87e1c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xd87e1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:597) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:597) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:597) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:597) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:597) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:597) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:597) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:597) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:597) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:597) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:597) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:597) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:597) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:597) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:597) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:597) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:597) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:597) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:597) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:597) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:597) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:597) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:597) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:597) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:597) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:597) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:597) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:597) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:597) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:597) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:597) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:597) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:597) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:597) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:597) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:597) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:597) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:597) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:597) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:597) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:597) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:597) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:597) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:597) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:597) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:597) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:597) igt_kms-DEBUG: display: MoveCu<14>[ 122.572692] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL rsor pip<14>[ 122.572835] [IGT] kms_vblank: finished subtest ts-continuation-dpms-suspend, FAIL e D, (0, 0) (kms_vblank:597) igt_kms-DE<14>[ 122.580209] [IGT] kms_vblank: exiting, ret=98 BUG: Test requirement passed: plane_idx <8>[ 122.602936] >= 0 && plane_idx < pipe->n_planes (kms_vblank:597) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:597) igt_kms-DEBUG: display: SetCrt<14>[ 122.628083] [IGT] kms_vblank: executing c pipe E, disabling (kms_vblank:597) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:597) igt_kms-DEBUG: display: Fixing <14>[ 122.646138] [IGT] kms_vblank: starting subtest ts-continuation-suspend up initi<14>[ 122.647465] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 al rotation pipe E, plane 17 (kms_vblank:597) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:597) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:597) igt_kms-DEBUG: display: } (kms_vblank:597) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:597) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:597) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:597) igt_core-INFO: Stack trace: (kms_vblank:597) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:597) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:597) igt_core-INFO: #2 [+0xd87e1f94] (kms_vblank:597) igt_core-INFO: #3 [+0xd87e2fa0] (kms_vblank:597) igt_core-INFO: #4 [+0xd87e31bc] (kms_vblank:597) igt_core-INFO: #5 [+0xd87e1c78] (kms_vblank:597) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:597) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:597) igt_core-INFO: #8 [+0xd87e1cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.037s)[0m [1mSubtest ts-continuation-dpms-suspend: FAIL (4.038s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305825 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-suspend Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:600) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:600) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:600) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xb7c41f94] #3 [+0xb7c42fa0] #4 [+0xb7c431bc] #5 [+0xb7c41c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xb7c41cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:600) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:600) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:600) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:600) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:600) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:600) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:600) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:600) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:600) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:600) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:600) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:600) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:600) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:600) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:600) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:600) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:600) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:600) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:600) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:600) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:600) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:600) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:600) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:600) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:600) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:600) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:600) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:600) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:600) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:600) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:600) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:600) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:600) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:600) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:600) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:600) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:600) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:600) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:600) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:600) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:600) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:600) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:600) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:600) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:600) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:600) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:600) igt_kms-DEBUG: display: MoveCu<14>[ 126.924673] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL rsor pipe D, (0, 0) (kms_vblank:600) ig<14>[ 126.924817] [IGT] kms_vblank: finished subtest ts-continuation-suspend, FAIL t_kms-DE<14>[ 126.932170] [IGT] kms_vblank: exiting, ret=98 BUG: Tes<8>[ 126.946420] t requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:600) igt_kms-DEBUG: display: Fixing up initi<14>[ 126.971402] [IGT] kms_vblank: executing al rotation pipe E, plane 0 (kms_vblank:600) igt_kms-DEBUG: display: SetCrtc pipe E<14>[ 126.983296] [IGT] kms_vblank: starting subtest ts-continuation-modeset <14>[ 126.984481] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 , disabling (kms_vblank:600) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:600) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:600) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:600) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:600) igt_kms-DEBUG: display: } (kms_vblank:600) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:600) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:600) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:600) igt_core-INFO: Stack trace: (kms_vblank:600) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:600) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:600) igt_core-INFO: #2 [+0xb7c41f94] (kms_vblank:600) igt_core-INFO: #3 [+0xb7c42fa0] (kms_vblank:600) igt_core-INFO: #4 [+0xb7c431bc] (kms_vblank:600) igt_core-INFO: #5 [+0xb7c41c78] (kms_vblank:600) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:600) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:600) igt_core-INFO: #8 [+0xb7c41cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.277s)[0m [1mSubtest ts-continuation-suspend: FAIL (4.279s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305829 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-modeset Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:603) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:603) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:603) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xd4331f94] #3 [+0xd4332fa0] #4 [+0xd43331bc] #5 [+0xd4331c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xd4331cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:603) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:603) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:603) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:603) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:603) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:603) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:603) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:603) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:603) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:603) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:603) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:603) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:603) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:603) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:603) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:603) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:603) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:603) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:603) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:603) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:603) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:603) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:603) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:603) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:603) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:603) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:603) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:603) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:603) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:603) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:603) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:603) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:603) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:603) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:603) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:603) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:603) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:603) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:603) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:603) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:603) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:603) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:603) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:603) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:603) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:603) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:603) igt_kms-DEBUG: display: MoveCu<14>[ 131.020653] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL rsor pip<14>[ 131.020795] [IGT] kms_vblank: finished subtest ts-continuation-modeset, FAIL e D, (0,<14>[ 131.028027] [IGT] kms_vblank: exiting, ret=98 0) (kms_vblank:603) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && <8>[ 131.049589] plane_idx < pipe->n_planes (kms_vblank:603) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:603) ig<14>[ 131.070319] [IGT] kms_vblank: executing t_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:603) igt_kms-DEBUG: Tes<14>[ 131.082342] [IGT] kms_vblank: starting subtest ts-continuation-modeset-hang t requir<14>[ 131.082474] [IGT] kms_vblank: finished subtest ts-continuation-modeset-hang, SKIP ement pa<14>[ 131.082621] [IGT] kms_vblank: exiting, ret=77 ssed: pl<8>[ 131.090464] ane_idx <14>[ 131.115870] [IGT] kms_vblank: executing >= 0 && plane_idx < pipe->n_planes (kms_vblank:603) igt_kms-DEBUG: display: Fixing up initi<14>[ 131.127780] [IGT] kms_vblank: starting subtest ts-continuation-modeset-rpm <14>[ 131.128965] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 al rotation pipe E, plane 17 (kms_vblank:603) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:603) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:603) igt_kms-DEBUG: display: } (kms_vblank:603) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:603) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:603) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:603) igt_core-INFO: Stack trace: (kms_vblank:603) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:603) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:603) igt_core-INFO: #2 [+0xd4331f94] (kms_vblank:603) igt_core-INFO: #3 [+0xd4332fa0] (kms_vblank:603) igt_core-INFO: #4 [+0xd43331bc] (kms_vblank:603) igt_core-INFO: #5 [+0xd4331c78] (kms_vblank:603) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:603) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:603) igt_core-INFO: #8 [+0xd4331cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.021s)[0m [1mSubtest ts-continuation-modeset: FAIL (4.037s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305834 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-modeset-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest ts-continuation-modeset-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305834 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-modeset-rpm Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:609) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:609) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:609) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xe9b31f94] #3 [+0xe9b32fa0] #4 [+0xe9b331bc] #5 [+0xe9b31c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xe9b31cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetProp plane A.9 "COLOR_RANGE" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.9 "pixel blend mode" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:609) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:609) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:609) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_ENCODING" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.10 "COLOR_RANGE" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.10 "pixel blend mode" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:609) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:609) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:609) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_ENCODING" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.11 "COLOR_RANGE" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.11 "pixel blend mode" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:609) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:609) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:609) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_ENCODING" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.12 "COLOR_RANGE" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.12 "pixel blend mode" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:609) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:609) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:609) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_ENCODING" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.13 "COLOR_RANGE" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.13 "pixel blend mode" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:609) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:609) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:609) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_ENCODING" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.14 "COLOR_RANGE" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.14 "pixel blend mode" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:609) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:609) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:609) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_ENCODING" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.15 "COLOR_RANGE" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.15 "pixel blend mode" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:609) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:609) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:609) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_ENCODING" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.16 "COLOR_RANGE" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.16 "pixel blend mode" to 0x0/0 (kms_vblank:609) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:609) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:609) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:609) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:609) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:609) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:609) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:609) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:609) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:609) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:609) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:609) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:609) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:609) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:609) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:609) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:609) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:609) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:609) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:609) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:609) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:609) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:609) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:609) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:609) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:609) igt_kms-DEBUG: display: <14>[ 135.373307] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL MoveCursor pip<14>[ 135.373450] [IGT] kms_vblank: finished subtest ts-continuation-modeset-rpm, FAIL e D, (0,<14>[ 135.380097] [IGT] kms_vblank: exiting, ret=98 0) (km<8>[ 135.390572] s_vblank<8>[ 135.392418] :609) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms<8>[ 135.416529] _vblank:609) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:609) igt_kms-DEBUG: dis<14>[ 135.435914] [IGT] vc4_create_bo: executing play: <14>[ 135.436328] [IGT] vc4_create_bo: exiting, ret=77 SetCrt<8>[ 135.446478] c pipe E, disabling (kms_vblank:609) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:609) igt_kms-DEBUG: disp<14>[ 135.467397] [IGT] vc4_create_bo: executing lay: <14>[ 135.467794] [IGT] vc4_create_bo: exiting, ret=77 Fixing <8>[ 135.473548] up initial rotation pipe E, plane 17 (kms_vblank:609) igt_kms-DEBUG: di<14>[ 135.491222] [IGT] vc4_create_bo: executing splay: <14>[ 135.491622] [IGT] vc4_create_bo: exiting, ret=77 SetCu<8>[ 135.497523] rsor pip<8>[ 135.499093] e E, disabling (kms_vblank:609) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vbl<8>[ 135.521278] ank:609) igt_kms-DEBUG: display: } (kms_vblank:609) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vbla<14>[ 135.540129] [IGT] vc4_dmabuf_poll: executing nk, file ../lib/igt_kms.c:5248: (kms_vb<14>[ 135.545655] [IGT] vc4_dmabuf_poll: exiting, ret=77 lank:609<8>[ 135.551034] ) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:609) i<14>[ 135.571623] [IGT] vc4_dmabuf_poll: executing gt_kms-C<14>[ 135.572040] [IGT] vc4_dmabuf_poll: exiting, ret=77 RITICAL:<8>[ 135.577775] Last er<8>[ 135.579351] rno: 16, Device or resource busy (kms_vblank:609) igt_core-INFO: Stack trace: <8>[ 135.601603] (kms_vblank:609) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:609) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() <14>[ 135.620409] [IGT] vc4_label_bo: executing (kms_vb<14>[ 135.620863] [IGT] vc4_label_bo: exiting, ret=77 lank:609<8>[ 135.626285] ) igt_core-INFO: #2 [+0xe9b31f94] (kms_vblank:609) igt_core-<14>[ 135.645373] [IGT] vc4_label_bo: executing INFO: <14>[ 135.645769] [IGT] vc4_label_bo: exiting, ret=77 #3 [[ 135.651316] nown>+0xe9b32fa0] (kms_vblank:609) igt_core-INFO: #4 [+0xe9b331bc] (kms_vbl<14>[ 135.672447] [IGT] vc4_label_bo: executing ank:609)<14>[ 135.672887] [IGT] vc4_label_bo: exiting, ret=77 igt_cor<8>[ 135.678561] e-INFO: #5 [+0xe9b31c78] (kms_vblank:609) igt_core-INFO: #6 [__libc_init_first+0x8<14>[ 135.697499] [IGT] vc4_label_bo: executing 0] (kms<14>[ 135.697918] [IGT] vc4_label_bo: exiting, ret=77 _vblank:<8>[ 135.703459] 609) igt<8>[ 135.705594] _core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:609) igt_core-INFO: #8 [+0xe9b31cb0] <8>[ 135.728645] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (4.229s)[0m [1mSubtest ts-continuation-modeset-rpm: FAIL (4.246s)[0m IGT-Vers<14>[ 135.748858] [IGT] vc4_lookup_fail: executing ion: 1.2<14>[ 135.749205] [IGT] vc4_lookup_fail: starting subtest bad-color-write 8-ga44eb<14>[ 135.749277] [IGT] vc4_lookup_fail: finished subtest bad-color-write, SUCCESS fe (aarc<14>[ 135.749368] [IGT] vc4_lookup_fail: exiting, ret=0 h64) (Li<8>[ 135.755081] nux: 6.1<8>[ 135.756665] .112-cip<8>[ 135.778333] 30-rt17 <14>[ 135.795878] [IGT] vc4_mmap: executing aarch64)<14>[ 135.796251] [IGT] vc4_mmap: exiting, ret=77 Using <8>[ 135.805511] IGT_SRANDOM=1706305838 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____re<14>[ 135.822344] [IGT] vc4_mmap: executing al_main27, file ../tests/vc4/vc4_create_bo.c:33: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest create-bo-4096: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305838 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main27, file ../tests/vc4/vc4_create_bo.c:33: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest create-bo-0: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305838 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main27, file ../tests/vc4/vc4_create_bo.c:33: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest create-bo-zeroed: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305838 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main58, file ../tests/vc4/vc4_dmabuf_poll.c:64: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest poll-write-waits-until-write-done: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305838 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main58, file ../tests/vc4/vc4_dmabuf_poll.c:64: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest poll-read-waits-until-write-done: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305838 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main42, file ../tests/vc4/vc4_label_bo.c:48: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest set-label: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305838 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main42, file ../tests/vc4/vc4_label_bo.c:48: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest set-bad-handle: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305838 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main42, file ../tests/vc4/vc4_label_bo.c:48: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest set-bad-name: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305838 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main42, file ../tests/vc4/vc4_label_bo.c:48: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest set-kernel-name: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305838 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-color-write [1mSubtest bad-color-write: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305838 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main11, file ../tests/vc4/vc4_mmap.c:17: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or director<14>[ 136.164991] [IGT] vc4_mmap: exiting, ret=77 y [1mS<8>[ 136.171999] <8>[ 136.173622] ubtest mmap-bad-handle: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: <8>[ 136.188672] 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305838 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_u<8>[ 136.211610] nique____real_main11, file ../tests/vc4/vc4_mmap.c:17: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest mmap-bo: SKI<14>[ 136.230784] [IGT] vc4_purgeable_bo: executing P (0.000<14>[ 136.231209] [IGT] vc4_purgeable_bo: exiting, ret=77 s)[0m <8>[ 136.236971] /usr/bin/igt-parser.sh: 73: vc4_prefmon: not found /usr/bin/igt-parser.sh: 83: vc4_prefmon: not found <14>[ 136.256940] [IGT] vc4_purgeable_bo: executing WARNING:<14>[ 136.257389] [IGT] vc4_purgeable_bo: exiting, ret=77 unhandl<8>[ 136.263100] ed exit status: 127 IGT-Version: 1.28-ga44ebfe (aarch64) (Linux<14>[ 136.283348] [IGT] vc4_purgeable_bo: executing : 6.1.11<14>[ 136.283754] [IGT] vc4_purgeable_bo: exiting, ret=77 2-cip30-<8>[ 136.289315] rt17 aarch64) Using IGT_SRANDOM=1706305839 for randomisation Opened device: /dev/dri/card0 Te<14>[ 136.310648] [IGT] vc4_purgeable_bo: executing st requi<14>[ 136.311071] [IGT] vc4_purgeable_bo: exiting, ret=77 rement n<8>[ 136.316821] ot met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test <14>[ 136.336521] [IGT] vc4_purgeable_bo: executing requirem<14>[ 136.336943] [IGT] vc4_purgeable_bo: exiting, ret=77 ent: igt<8>[ 136.342781] _vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last<14>[ 136.362391] [IGT] vc4_purgeable_bo: executing errno: <14>[ 136.362791] [IGT] vc4_purgeable_bo: exiting, ret=77 22, Inva<8>[ 136.368279] lid argument [1mSubtest mark-willneed: SKIP (0.000s)[<14>[ 136.387162] [IGT] vc4_purgeable_bo: executing 0m IGT-<14>[ 136.387559] [IGT] vc4_purgeable_bo: exiting, ret=77 Version:<8>[ 136.393091] 1.28-ga44ebfe (aarch64) (Linux: 6.1.112<14>[ 136.411628] [IGT] vc4_purgeable_bo: executing -cip30-r<14>[ 136.412064] [IGT] vc4_purgeable_bo: exiting, ret=77 t17 aarc<8>[ 136.418102] h64) Using IGT_SRANDOM=1706305839 for randomisa<14>[ 136.435773] [IGT] vc4_purgeable_bo: executing tion Op<14>[ 136.436143] [IGT] vc4_purgeable_bo: exiting, ret=77 ened dev<8>[ 136.441248] ice: /de<8>[ 136.442789] v/dri/card0 Test requirement not met in functio<8>[ 136.462942] n __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_<14>[ 136.479491] [IGT] vc4_tiling: executing SUPPORTS<14>[ 136.479855] [IGT] vc4_tiling: exiting, ret=77 _MADVISE<8>[ 136.484898] ) Last errno: 22, Invalid argument [1mSubtest mark-purgeable: SKIP (0<14>[ 136.501674] [IGT] vc4_tiling: executing .000s)[<14>[ 136.502027] [IGT] vc4_tiling: exiting, ret=77 0m IGT-<8>[ 136.507147] Version: 1.28-ga44ebfe (<14>[ 136.524312] [IGT] vc4_tiling: executing aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Us<14>[ 136.529239] [IGT] vc4_tiling: exiting, ret=77 ing IGT_<8>[ 136.534602] SRANDOM=1706305839 for randomisation Opened device: /dev/dri/card0 Test requir<14>[ 136.551787] [IGT] vc4_tiling: executing ement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 22, Invalid argument [1mSubtest mark-purgeable-twice: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305839 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 22, Invalid argument [1mSubtest mark-unpurgeable-twice: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305839 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 22, Invalid argument [1mSubtest access-purgeable-bo-mem: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305839 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 22, Invalid argument [1mSubtest access-purged-bo-mem: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305839 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 22, Invalid argument [1mSubtest mark-unpurgeable-check-retained: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305839 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 22, Invalid argument [1mSubtest mark-unpurgeable-purged: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305839 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 22, Invalid argument [1mSubtest free-purged-bo: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305839 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main27, file ../tests/vc4/vc4_tiling.c:33: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest get-bad-handle: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305839 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main27, file ../tests/vc4/vc4_tiling.c:33: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest set-bad-handle: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305839 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main27, file ../tests/vc4/vc4_tiling.c:33: Test requirement: igt_vc4_is_v3d(f<14>[ 136.895020] [IGT] vc4_tiling: exiting, ret=77 d) Last<8>[ 136.901055] errno: 2, No such file or directory [1mSubtest get-bad-flags: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux:<14>[ 136.918781] [IGT] vc4_tiling: executing 6.1.112<14>[ 136.919146] [IGT] vc4_tiling: exiting, ret=77 -cip30-r<8>[ 136.924385] t17 aarch64) Using IGT_SRANDOM=1706305839 for randomisation Opened device: /dev/dri/card0 Test requirement no<14>[ 136.944848] [IGT] vc4_tiling: executing t met in<14>[ 136.945281] [IGT] vc4_tiling: exiting, ret=77 functio<8>[ 136.950722] n __igt_unique____real_main27, file ../tests/vc4/vc4_tiling.c:33: Test <14>[ 136.970022] [IGT] vc4_tiling: executing requirem<14>[ 136.970518] [IGT] vc4_tiling: exiting, ret=77 ent: igt<8>[ 136.976280] _vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest set-bad-f<14>[ 136.995877] [IGT] vc4_tiling: executing lags: SK<14>[ 136.996276] [IGT] vc4_tiling: exiting, ret=77 IP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-ci<8>[ 137.011615] p30-rt17<8>[ 137.013299] aarch64) Using IGT_SRANDOM=1706305839 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_uni<8>[ 137.035926] que____real_main27, file ../tests/vc4/vc4_tiling.c:33: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest get-bad-modifier: SK<14>[ 137.055824] [IGT] vc4_wait_bo: executing IP (0.00<14>[ 137.056222] [IGT] vc4_wait_bo: exiting, ret=77 0s)[0m <8>[ 137.061929] IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305839 for randomisatio<14>[ 137.082572] [IGT] vc4_wait_bo: executing n Opene<14>[ 137.082987] [IGT] vc4_wait_bo: exiting, ret=77 d device<8>[ 137.088975] : /dev/dri/card0 Test requirement not met in function __igt_unique____real_main<14>[ 137.106933] [IGT] vc4_wait_bo: executing 27, file<14>[ 137.107337] [IGT] vc4_wait_bo: exiting, ret=77 ../test<8>[ 137.112938] s/vc4/vc4_tiling.c:33: Test requirement: igt_vc4_is_v3d(fd) Last errno<14>[ 137.131808] [IGT] vc4_wait_bo: executing : 2, No <14>[ 137.132224] [IGT] vc4_wait_bo: exiting, ret=77 such fil<8>[ 137.142406] e or directory [1mSubtest set-bad-modifier: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=170<14>[ 137.161422] [IGT] vc4_wait_bo: executing 6305839 <14>[ 137.161827] [IGT] vc4_wait_bo: exiting, ret=77 for rand<8>[ 137.167398] omisation Opened device: /dev/dri/card0 Test requirement not met in fu<14>[ 137.186585] [IGT] vc4_wait_bo: executing nction _<14>[ 137.186987] [IGT] vc4_wait_bo: exiting, ret=77 _igt_uni<8>[ 137.192737] que____real_main27, file ../tests/vc4/vc4_tiling.c:33: Test requirement: igt_vc<14>[ 137.211266] [IGT] vc4_wait_bo: executing 4_is_v3d<14>[ 137.211664] [IGT] vc4_wait_bo: exiting, ret=77 (fd) La<8>[ 137.217343] st errno<8>[ 137.218952] : 2, No such file or directory [1mSubtest set-get: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Li<8>[ 137.241049] nux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305839 for randomisation Opened device: /dev/dri/card0 Test re<14>[ 137.259868] [IGT] vc4_wait_seqno: executing quiremen<14>[ 137.260287] [IGT] vc4_wait_seqno: exiting, ret=77 t not met in function __igt_unique____real_main27, file ../tests/vc4/vc4_tiling.c:33: Test requirement:<8>[ 137.276837] igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest get-after-free: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch6<14>[ 137.297816] [IGT] vc4_wait_seqno: executing 4) (Linu<14>[ 137.298230] [IGT] vc4_wait_seqno: exiting, ret=77 x: 6.1.1<8>[ 137.303901] <8>[ 137.305504] 12-cip30-rt17 aarch64) <8>[ 137.322870] Using IGT_SRANDOM=1706305840 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main60, file ../tests/vc4/vc4_wait_bo.c:67: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest bad-bo: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305840 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main60, file ../tests/vc4/vc4_wait_bo.c:67: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest bad-pad: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305840 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main60, file ../tests/vc4/vc4_wait_bo.c:67: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest unused-bo-0ns: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305840 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main60, file ../tests/vc4/vc4_wait_bo.c:67: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest unused-bo-1ns: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305840 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main60, file ../tests/vc4/vc4_wait_bo.c:67: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest used-bo-0ns: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305840 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main60, file ../tests/vc4/vc4_wait_bo.c:67: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest used-bo-1ns: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305840 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main60, file ../tests/vc4/vc4_wait_bo.c:67: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest used-bo: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305840 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main27, file ../tests/vc4/vc4_wait_seqno.c:33: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest bad-seqno-0ns: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 6.1.112-cip30-rt17 aarch64) Using IGT_SRANDOM=1706305840 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main27, file ../tests/vc4/vc4_wait_seqno.c:33: Test requirement: igt_vc4_is_v3d(fd) Last errno: 2, No such file or directory [1mSubtest bad-seqno-1ns: SKIP (0.000s)[0m + set +x / #