Connected to bbb-patersonc-01 console [channel connected] (~$quit to exit) U-Boot SPL 2020.10 (Apr 28 2023 - 11:09:01 +0100) Trying to boot from MMC2 U-Boot 2020.10 (Apr 28 2023 - 11:09:01 +0100) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... Unable to use mmc 1:1... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.1.19 (1083 ms) =>setenv serverip 192.168.1.1 setenv serverip 192.168.1.1 => tftp 0x82000000 950876/tftp-deploy-9ecpf1v4/kernel/zImage tftp 0x82000000 950876/tftp-deploy-9ecpf1v4/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.19 Filename '950876/tftp-deploy-9ecpf1v4/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 2.4 MiB/s done Bytes transferred = 10347008 (9de200 hex) => tftp 0x83000000 950876/tftp-deploy-9ecpf1v4/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 950876/tftp-deploy-9ecpf1v4/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.19 Filename '950876/tftp-deploy-9ecpf1v4/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################ 2.4 MiB/s done Bytes transferred = 17158697 (105d229 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 950876/tftp-deploy-9ecpf1v4/dtb/am335x-boneblack.dtb tftp 0x88000000 950876/tftp-deploy-9ecpf1v4/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.19 Filename '950876/tftp-deploy-9ecpf1v4/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *##### 2.2 MiB/s done Bytes transferred = 69937 (11131 hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-06-03 18:31:51 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17158633 Bytes = 16.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 88014130 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.31 (KernelCI@build-j1605191-arm-gcc-10-multi-v7-defconfig-8lsfx) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Sat Jun 3 16:07:21 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129540 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 408504K/522240K available (14336K kernel code, 2468K rwdata, 6004K rodata, 2048K init, 429K bss, 48200K reserved, 65536K cma-reserved, 0K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008336] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.019119] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.033892] Console: colour dummy device 80x30 <3>[ 0.038771] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.045828] This ensures that you still see kernel messages. Please <3>[ 0.052548] update your kernel commandline. <6>[ 0.057156] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.096117] pid_max: default: 32768 minimum: 301 <6>[ 0.101331] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.109127] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.118065] CPU: Testing write buffer coherency: ok <6>[ 0.123454] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.129295] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.135793] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.145244] rcu: Hierarchical SRCU implementation. <6>[ 0.150504] rcu: Max phase no-delay instances is 1000. <6>[ 0.161322] EFI services will not be available. <6>[ 0.166533] smp: Bringing up secondary CPUs ... <6>[ 0.171500] smp: Brought up 1 node, 1 CPU <6>[ 0.175895] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.182622] CPU: All CPU(s) started in SVC mode. <6>[ 0.188288] devtmpfs: initialized <6>[ 0.204027] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.212554] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.222991] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.235342] pinctrl core: initialized pinctrl subsystem <6>[ 0.246035] DMI not present or invalid. <6>[ 0.251200] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.260148] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.270808] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.270958] cpuidle: using governor menu <6>[ 0.299265] No ATAGs? <6>[ 0.301996] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 0.313483] Serial: AMBA PL011 UART driver <6>[ 1.425874] iommu: Default domain type: Translated <6>[ 1.431325] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 1.438814] SCSI subsystem initialized <6>[ 1.443775] usbcore: registered new interface driver usbfs <6>[ 1.449839] usbcore: registered new interface driver hub <6>[ 1.455613] usbcore: registered new device driver usb <6>[ 1.462102] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.467486] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.477208] PTP clock support registered <6>[ 1.481703] EDAC MC: Ver: 3.0.0 <6>[ 1.488023] vgaarb: loaded <6>[ 1.491752] clocksource: Switched to clocksource dmtimer <6>[ 1.556340] NET: Registered PF_INET protocol family <6>[ 1.562026] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 1.570790] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 1.579722] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 1.587981] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 1.596269] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) <6>[ 1.603985] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 1.610896] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 1.617921] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 1.625530] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 1.632537] RPC: Registered named UNIX socket transport module. <6>[ 1.638913] RPC: Registered udp transport module. <6>[ 1.644068] RPC: Registered tcp transport module. <6>[ 1.649173] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.656089] PCI: CLS 0 bytes, default 64 <5>[ 1.661901] Initialise system trusted keyrings <6>[ 1.667119] Trying to unpack rootfs image as initramfs... <6>[ 1.712288] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 1.725806] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 1.752447] NFS: Registering the id_resolver key type <5>[ 1.758038] Key type id_resolver registered <5>[ 1.762675] Key type id_legacy registered <6>[ 1.767188] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 1.774378] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 1.782336] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 1.822326] Key type asymmetric registered <5>[ 1.826845] Asymmetric key parser 'x509' registered <6>[ 1.832419] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 1.840301] io scheduler mq-deadline registered <6>[ 1.845300] io scheduler kyber registered <6>[ 2.025587] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 2.036552] SuperH (H)SCI(F) driver initialized <6>[ 2.042367] msm_serial: driver initialized <6>[ 2.046859] STMicroelectronics ASC driver initialized <6>[ 2.053820] STM32 USART driver initialized <6>[ 2.112952] brd: module loaded <6>[ 2.136788] loop: module loaded <6>[ 2.150865] CAN device driver interface <6>[ 2.156030] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 2.162973] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 2.168353] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 2.174854] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 2.180674] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 2.189611] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 2.195770] usbcore: registered new interface driver pegasus <6>[ 2.201937] usbcore: registered new interface driver asix <6>[ 2.207816] usbcore: registered new interface driver ax88179_178a <6>[ 2.214409] usbcore: registered new interface driver cdc_ether <6>[ 2.220718] usbcore: registered new interface driver smsc75xx <6>[ 2.226980] usbcore: registered new interface driver smsc95xx <6>[ 2.233213] usbcore: registered new interface driver net1080 <6>[ 2.239331] usbcore: registered new interface driver cdc_subset <6>[ 2.245740] usbcore: registered new interface driver zaurus <6>[ 2.251826] usbcore: registered new interface driver cdc_ncm <6>[ 2.261296] usbcore: registered new interface driver usb-storage <6>[ 2.272168] i2c_dev: i2c /dev entries driver <5>[ 2.289517] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 2.298839] sdhci: Secure Digital Host Controller Interface driver <6>[ 2.305582] sdhci: Copyright(c) Pierre Ossman <6>[ 2.311959] Synopsys Designware Multimedia Card Interface Driver <6>[ 2.319673] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 2.532564] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 2.541981] usbcore: registered new interface driver usbhid <6>[ 2.548009] usbhid: USB HID core driver <6>[ 2.559493] NET: Registered PF_INET6 protocol family <6>[ 2.602682] Segment Routing with IPv6 <6>[ 2.606806] In-situ OAM (IOAM) with IPv6 <6>[ 2.611193] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.618414] NET: Registered PF_PACKET protocol family <6>[ 2.623955] can: controller area network core <6>[ 2.628782] NET: Registered PF_CAN protocol family <6>[ 2.634005] can: raw protocol <6>[ 2.637327] can: broadcast manager protocol <6>[ 2.641924] can: netlink gateway - max_hops=1 <5>[ 2.647274] Key type dns_resolver registered <6>[ 2.652166] ThumbEE CPU extension supported. <5>[ 2.656842] Registering SWP/SWPB emulation handler <3>[ 2.662515] omap_voltage_late_init: Voltage driver support not added <5>[ 2.732843] Loading compiled-in X.509 certificates <6>[ 2.828802] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <4>[ 2.850525] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 2.958957] ti-sysc: probe of 48040000.target-module failed with error -16 <4>[ 2.999646] gpio gpiochip0: (gpio-0-31): not an immutable chip, please consider fixing it! <6>[ 3.092653] OMAP GPIO hardware version 0.1 <4>[ 3.153330] at24 2-0054: supply vcc not found, using dummy regulator <4>[ 3.187750] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 3.225413] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 3.265256] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 3.304845] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <4>[ 3.319010] gpio gpiochip1: (gpio-32-63): not an immutable chip, please consider fixing it! <4>[ 3.355129] gpio gpiochip2: (gpio-64-95): not an immutable chip, please consider fixing it! <6>[ 3.403383] platform 4830e000.lcdc: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <4>[ 3.428583] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 3.442245] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.522305] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 3.545957] random: crng init done <6>[ 3.602086] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 3.778963] Freeing initrd memory: 16760K <6>[ 3.815255] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 3.825349] cpsw-switch 4a100000.switch: initialized cpsw ale version 1.4 <6>[ 3.832661] cpsw-switch 4a100000.switch: ALE Table size 1024 <6>[ 3.838913] cpsw-switch 4a100000.switch: cpts: overflow check period 500 (jiffies) <6>[ 3.847027] cpsw-switch 4a100000.switch: CPTS: ref_clk_freq:250000000 calc_mult:2147483648 calc_shift:29 error:0 nsec/sec <6>[ 3.858659] cpsw-switch 4a100000.switch: Detected MACID = f4:b8:98:ab:fa:84 <5>[ 3.867540] cpsw-switch 4a100000.switch: initialized (regs 0x4a100000, pool size 256) hw_ver:0019010C 1.12 (0) <3>[ 3.895311] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.903862] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 3.962638] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <4>[ 3.979418] gpio gpiochip3: (gpio-96-127): not an immutable chip, please consider fixing it! <3>[ 3.993702] l3-aon-clkctrl:0000:0: failed to disable <6>[ 4.003233] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 35, base_baud = 3000000) is a 8250 <6>[ 4.012653] printk: console [ttyS0] enabled <6>[ 4.012653] printk: console [ttyS0] enabled <6>[ 4.021689] printk: bootconsole [omap8250] disabled <6>[ 4.021689] printk: bootconsole [omap8250] disabled <4>[ 4.062433] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.075789] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.091977] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.099262] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 4.107291] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.125222] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.134376] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.139494] sdhci-omap 48060000.mmc: supply pbias not found, using dummy regulator <4>[ 4.155672] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <4>[ 4.164349] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 4.198386] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.231799] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <6>[ 4.240638] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.249617] cpsw-switch 4a100000.switch: starting ndev. mode: dual_mac <6>[ 4.309735] mmc1: new high speed MMC card at address 0001 <6>[ 4.318114] mmcblk1: mmc1:0001 MK2704 3.53 GiB <6>[ 4.328738] mmcblk1: p1 <6>[ 4.334734] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 4.346283] mmcblk1boot0: mmc1:0001 MK2704 2.00 MiB <6>[ 4.356196] mmcblk1boot1: mmc1:0001 MK2704 2.00 MiB <6>[ 4.369669] mmcblk1rpmb: mmc1:0001 MK2704 512 KiB, chardev (236:0) <6>[ 7.472670] cpsw-switch 4a100000.switch eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.481436] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.511759] Sending DHCP requests ., OK <6>[ 7.556124] IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.19 <6>[ 7.564248] IP-Config: Complete: <6>[ 7.567777] device=eth0, hwaddr=f4:b8:98:ab:fa:84, ipaddr=192.168.1.19, mask=255.255.255.0, gw=192.168.1.1 <6>[ 7.578272] host=192.168.1.19, domain=example.org, nis-domain=(none) <6>[ 7.585427] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= <6>[ 7.585457] nameserver0=192.168.1.1 <6>[ 7.610325] Freeing unused kernel image (initmem) memory: 2048K <6>[ 7.633166] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.852166] udevd[100]: starting version 3.2.9 <27>[ 7.868770] udevd[100]: specified user 'tss' unknown <27>[ 7.874738] udevd[100]: specified group 'tss' unknown <30>[ 7.885404] udevd[101]: starting eudev-3.2.9 <4>[ 10.375077] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 10.384286] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <4>[ 10.633151] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 10.642244] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 10.850965] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 10.856827] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 11.088161] hub 1-0:1.0: USB hub found <6>[ 11.122002] hub 1-0:1.0: 1 port detected <6>[ 11.924976] tda998x 0-0070: found TDA19988 done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-950876/environment . /lava-950876/environment / # /lava-950876/bin/lava-test-runner /lava-950876/0 /lava-950876/bin/lava-test-runner /lava-950876/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-950876/0/tests/0_dmesg + cat uuid + UUID=950876_1.5.2.4.1 + <8>[ 16.716289] set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 16.778016] <8>[ 16.834209] <8>[ 16.890135] + set +x <8>[ 16.901157] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-950876/environment / # . /lava-950876/environment/lava-950876/bin/lava-test-runner /lava-950876/1 / # /lava-950876/bin/lava-test-runner /lava-950876/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-950876/1/tests/1_bootrr + cat uuid + UUID=950876_1.5.2.4.5 + <8>[ 17.508613] set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-950876/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-950876/1/../bin/lava-test-case <8>[ 17.582503] /lava-950876/1/../bin/lava-test-case <8>[ 17.635203] /lava-950876/1/../bin/lava-test-case <8>[ 17.666839] /lava-950876/1/../bin/lava-test-case <8>[ 17.726192] /lava-950876/1/../bin/lava-test-case <8>[ 17.775865] /lava-950876/1/../bin/lava-test-case <8>[ 17.815979] /lava-950876/1/../bin/lava-test-case <8>[ 17.865554] /lava-950876/1/../bin/lava-test-case <8>[ 17.914626] /lava-950876/1/../bin/lava-test-case <8>[ 17.954333] /lava-950876/1/../bin/lava-test-case <8>[ 18.003479] /lava-950876/1/../bin/lava-test-case <8>[ 19.070538] /lava-950876/1/../bin/lava-test-case <8>[ 20.139602] /lava-950876/1/../bin/lava-test-case <8>[ 20.179104] /lava-950876/1/../bin/lava-test-case <8>[ 20.217774] /lava-950876/1/../bin/lava-test-case <8>[ 20.257769] /lava-950876/1/../bin/lava-test-case <8>[ 20.306499] /lava-950876/1/../bin/lava-test-case <8>[ 20.347261] /lava-950876/1/../bin/lava-test-case <8>[ 20.396946] /lava-950876/1/../bin/lava-test-case <8>[ 20.445327] /lava-950876/1/../bin/lava-test-case <8>[ 20.485014] /lava-950876/1/../bin/lava-test-case <8>[ 20.534177] /lava-950876/1/../bin/lava-test-case <8>[ 20.582993] /lava-950876/1/../bin/lava-test-case <8>[ 20.623671] /lava-950876/1/../bin/lava-test-case <8>[ 20.672839] /lava-950876/1/../bin/lava-test-case <8>[ 20.712855] /lava-950876/1/../bin/lava-test-case <8>[ 20.761474] /lava-950876/1/../bin/lava-test-case <8>[ 20.800787] /lava-950876/1/../bin/lava-test-case <8>[ 20.850545] /lava-950876/1/../bin/lava-test-case <8>[ 20.890968] /lava-950876/1/../bin/lava-test-case <8>[ 20.940598] /lava-950876/1/../bin/lava-test-case <8>[ 20.980905] /lava-950876/1/../bin/lava-test-case <8>[ 21.030332] /lava-950876/1/../bin/lava-test-case <8>[ 22.098721] /lava-950876/1/../bin/lava-test-case <8>[ 23.169129] /lava-950876/1/../bin/lava-test-case <8>[ 23.208938] /lava-950876/1/../bin/lava-test-case <8>[ 23.258381] /lava-950876/1/../bin/lava-test-case <8>[ 24.322881] /lava-950876/1/../bin/lava-test-case <8>[ 25.390866] /lava-950876/1/../bin/lava-test-case <8>[ 26.459659] /lava-950876/1/../bin/lava-test-case <8>[ 27.529323] /lava-950876/1/../bin/lava-test-case <8>[ 28.598358] /lava-950876/1/../bin/lava-test-case <8>[ 29.668532] /lava-950876/1/../bin/lava-test-case <8>[ 30.738347] /lava-950876/1/../bin/lava-test-case <8>[ 31.808260] /lava-950876/1/../bin/lava-test-case <8>[ 31.848013] /lava-950876/1/../bin/lava-test-case <8>[ 31.896740] /lava-950876/1/../bin/lava-test-case <8>[ 31.936433] /lava-950876/1/../bin/lava-test-case <8>[ 31.985392] /lava-950876/1/../bin/lava-test-case <8>[ 32.024825] /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found /lava-950876/1/../bin/lava-test-case <8>[ 32.066725] /lava-950876/1/../bin/lava-test-case <8>[ 32.115957] /lava-950876/1/../bin/lava-test-case <8>[ 32.161668] + set +x <8>[ 32.178037] / #