connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/967509/tftp-deploy-p01_i517/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/967509/tftp-deploy-p01_i517/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/967509/tftp-deploy-p01_i517/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/967509/tftp-deploy-p01_i517/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/967509/tftp-deploy-p01_i517/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/967509/tftp-deploy-p01_i517/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address aa:3b:e2:c4:09:f1 T eth0: DHCP client bound to address 10.8.254.151 Loading ARM Linux zImage '/mnt/tftp/967509/tftp-deploy-p01_i517/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x13157000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/967509/tftp-deploy-p01_i517/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x1905f0f1 Loading devicetree from '/mnt/tftp/967509/tftp-deploy-p01_i517/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x13157000, initrd at 0x18000000, oftree at 0x19060000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.31 (KernelCI@build-j1608970-arm-gcc-10-multi-v7-defconfig-msm7b) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Jun 5 10:28:09 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1969720K/2097152K available (14336K kernel code, 2468K rwdata, 6004K rodata, 2048K init, 429K bss, 61896K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000019] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.004028] Console: colour dummy device 80x30 [ 0.004080] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.004097] pid_max: default: 32768 minimum: 301 [ 0.004295] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004319] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004991] CPU: Testing write buffer coherency: ok [ 0.005051] CPU0: Spectre v2: using BPIALL workaround [ 0.005385] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006311] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.007996] rcu: Hierarchical SRCU implementation. [ 0.008004] rcu: Max phase no-delay instances is 1000. [ 0.011661] EFI services will not be available. [ 0.012044] smp: Bringing up secondary CPUs ... [ 0.012904] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.012921] CPU1: Spectre v2: using BPIALL workaround [ 0.013892] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.013907] CPU2: Spectre v2: using BPIALL workaround [ 0.014840] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.014856] CPU3: Spectre v2: using BPIALL workaround [ 0.014964] smp: Brought up 1 node, 4 CPUs [ 0.014976] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.014986] CPU: All CPU(s) started in SVC mode. [ 0.015656] devtmpfs: initialized [ 0.023053] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.023275] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.023298] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.026658] pinctrl core: initialized pinctrl subsystem [ 0.030377] DMI not present or invalid. [ 0.031180] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.034317] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.037053] thermal_sys: Registered thermal governor 'step_wise' [ 0.037133] cpuidle: using governor menu [ 0.037353] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.045399] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2800000 [ 0.045476] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 [ 0.066685] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2100000/i2c@21a4000/camera@3c [ 0.076827] No ATAGs? [ 0.076985] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.076999] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.080324] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.087587] Serial: AMBA PL011 UART driver [ 0.125816] iommu: Default domain type: Translated [ 0.125827] iommu: DMA domain TLB invalidation policy: strict mode [ 0.126622] SCSI subsystem initialized [ 0.127149] usbcore: registered new interface driver usbfs [ 0.127195] usbcore: registered new interface driver hub [ 0.127237] usbcore: registered new device driver usb [ 0.127482] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 0.127644] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 0.127803] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 0.127929] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 0.129645] i2c i2c-0: IMX I2C adapter registered [ 0.131309] i2c i2c-1: IMX I2C adapter registered [ 0.132489] i2c i2c-2: IMX I2C adapter registered [ 0.133979] pps_core: LinuxPPS API ver. 1 registered [ 0.133986] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.134006] PTP clock support registered [ 0.134256] EDAC MC: Ver: 3.0.0 [ 0.137878] vgaarb: loaded [ 1.333247] clocksource: Switched to clocksource mxc_timer1 [ 1.344652] NET: Registered PF_INET protocol family [ 1.345099] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.347053] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.347088] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.347106] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.347194] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.347476] TCP: Hash tables configured (established 8192 bind 8192) [ 1.347680] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.347725] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.347942] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.348678] RPC: Registered named UNIX socket transport module. [ 1.348691] RPC: Registered udp transport module. [ 1.348696] RPC: Registered tcp transport module. [ 1.348700] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.348710] PCI: CLS 0 bytes, default 64 [ 1.349334] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 1.349983] Trying to unpack rootfs image as initramfs... [ 1.374211] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.376341] Initialise system trusted keyrings [ 1.376624] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.382742] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.383592] NFS: Registering the id_resolver key type [ 1.383634] Key type id_resolver registered [ 1.383640] Key type id_legacy registered [ 1.383742] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.383752] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.383790] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.384298] Key type asymmetric registered [ 1.384309] Asymmetric key parser 'x509' registered [ 1.384472] bounce: pool size: 64 pages [ 1.384594] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.384604] io scheduler mq-deadline registered [ 1.384611] io scheduler kyber registered [ 1.434813] mxs-dma 110000.dma-apbh: initialized [ 1.515966] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 1.521316] SuperH (H)SCI(F) driver initialized [ 1.522420] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 269, base_baud = 5000000) is a IMX [ 2.355019] printk: console [ttymxc0] enabled [ 2.360668] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 270, base_baud = 5000000) is a IMX [ 2.371068] msm_serial: driver initialized [ 2.375219] STMicroelectronics ASC driver initialized [ 2.382302] STM32 USART driver initialized [ 2.409596] brd: module loaded [ 2.420370] loop: module loaded [ 2.427779] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.435754] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.443795] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.451990] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.459785] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 2.467342] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 2.474677] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 2.485174] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.492186] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.501040] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.511990] scsi host0: ahci-imx [ 2.515678] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 271 [ 2.537869] CAN device driver interface [ 2.543709] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 2.553686] pps pps0: new PPS source ptp0 [ 2.855175] ata1: SATA link down (SStatus 0 SControl 300) [ 2.857387] Freeing initrd memory: 16768K [ 2.860666] ahci-imx 2200000.sata: no device found, disabling link. [ 2.865106] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 2.870966] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 2.881354] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware [ 2.904019] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.911420] e1000e: Intel(R) PRO/1000 Network Driver [ 2.916423] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.922417] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.927854] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.940148] pegasus: Pegasus/Pegasus II USB Ethernet driver [ 2.945802] usbcore: registered new interface driver pegasus [ 2.951521] usbcore: registered new interface driver asix [ 2.956987] usbcore: registered new interface driver ax88179_178a [ 2.963118] usbcore: registered new interface driver cdc_ether [ 2.969019] usbcore: registered new interface driver smsc75xx [ 2.974836] usbcore: registered new interface driver smsc95xx [ 2.980621] usbcore: registered new interface driver net1080 [ 2.986346] usbcore: registered new interface driver cdc_subset [ 2.992300] usbcore: registered new interface driver zaurus [ 2.997968] usbcore: registered new interface driver cdc_ncm [ 3.010246] usbcore: registered new interface driver usb-storage [ 3.025087] i2c_dev: i2c /dev entries driver [ 3.053666] sdhci: Secure Digital Host Controller Interface driver [ 3.059859] sdhci: Copyright(c) Pierre Ossman [ 3.067233] Synopsys Designware Multimedia Card Interface Driver [ 3.075910] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.084184] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 3.087669] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 3.089282] ledtrig-cpu: registered to indicate activity on CPUs [ 3.102284] usbcore: registered new interface driver usbhid [ 3.107923] usbhid: USB HID core driver [ 3.122065] NET: Registered PF_INET6 protocol family [ 3.129154] Segment Routing with IPv6 [ 3.132890] In-situ OAM (IOAM) with IPv6 [ 3.136934] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.143565] NET: Registered PF_PACKET protocol family [ 3.148630] can: controller area network core [ 3.153068] NET: Registered PF_CAN protocol family [ 3.157893] can: raw protocol [ 3.159372] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 3.159711] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 3.160876] can: broadcast manager protocol [ 3.160890] can: netlink gateway - max_hops=1 [ 3.168223] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 3.175118] Key type dns_resolver registered [ 3.196653] ThumbEE CPU extension supported. [ 3.200945] Registering SWP/SWPB emulation handler [ 3.206792] Loading compiled-in X.509 certificates [ 3.212512] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.222776] mmc0: new high speed SDHC card at address 1234 [ 3.229466] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.243412] imx_usb 2184200.usb: No over current polarity defined [ 3.253343] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 3.258253] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 3.292997] mmc2: new DDR MMC card at address 0001 [ 3.298458] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 3.305108] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.313756] hub 1-0:1.0: USB hub found [ 3.314190] mmcblk2: p1 p2 [ 3.317555] hub 1-0:1.0: 1 port detected [ 3.325494] mmcblk2boot0: mmc2:0001 S10004 4.00 MiB [ 3.327087] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 3.332467] mmcblk2boot1: mmc2:0001 S10004 4.00 MiB [ 3.348472] mmcblk2rpmb: mmc2:0001 S10004 4.00 MiB, chardev (236:0) [ 3.350999] Freeing unused kernel image (initmem) memory: 2048K [ 3.424310] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 3.570292] udevd[122]: starting version 3.2.9 [ 3.613248] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.826203] hub 1-1:1.0: USB hub found [ 3.830807] hub 1-1:1.0: 4 ports detected [ 6.173214] random: crng init done [ 6.184347] udevd[122]: specified user 'tss' unknown [ 6.189445] udevd[122]: specified group 'tss' unknown [ 6.197172] udevd[123]: starting eudev-3.2.9 [ 6.622570] imx-ipuv3 2400000.ipu: IPUv3H probed [ 6.629928] imx-ipuv3 2800000.ipu: IPUv3H probed [ 6.709400] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 6.723489] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 6.730454] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 6.737169] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 6.764927] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 6.793394] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 6.793821] caam 2100000.crypto: Entropy delay = 3200 [ 6.822432] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 6.828592] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 6.865320] caam 2100000.crypto: Instantiated RNG4 SH0 [ 6.873675] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 6.926082] caam 2100000.crypto: Instantiated RNG4 SH1 [ 6.931252] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 6.937927] caam 2100000.crypto: job rings = 2, qi = 0 [ 6.982303] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) [ 6.990777] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) [ 7.003466] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) [ 7.011857] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) [ 7.020267] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 7.093048] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 7.101040] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 7.108396] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 7.243966] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 7.326212] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 7.337749] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 7.513555] fsl-asoc-card sound: ASoC: driver name too long 'imx6-wandboard-sgtl5000' -> 'imx6-wandboard-' [ 7.841310] caam algorithms registered in /proc/crypto [ 7.847832] caam 2100000.crypto: registering rng-caam [ 7.853214] caam 2100000.crypto: rng crypto API alg registered prng-caam done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-967509/environment . /lava-967509/environment / # /lava-967509/bin/lava-test-runner /lava-967509/0 /lava-967509/bin/lava-test-runner /lava-967509/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-967509/0/tests/0_dmesg + cat uuid + UUID=967509_1.5.2.3.1[ 8.610465] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 8.660352] [ 8.705358] [ 8.750468] + set[ 8.760312] +x / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-967509/environment / # . /lava-967509/environment/lava-967509/bin/lava-test-runner /lava-967509/1 / # /lava-967509/bin/lava-test-runner /lava-967509/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-967509/1/tests/1_bootrr + cat uuid + UUID=967509_1.5.2.3.5 + set [ 9.258441] +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-967509/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-967509/1/../bin/lava-test-case [ 9.322642] /lava-967509/1/../bin/lava-test-case [ 9.367648] /lava-967509/1/../bin/lava-test-case [ 9.395695] + set[ 9.416216] +x / #