connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/967387/tftp-deploy-f4ekz64f/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/967387/tftp-deploy-f4ekz64f/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/967387/tftp-deploy-f4ekz64f/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/967387/tftp-deploy-f4ekz64f/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/967387/tftp-deploy-f4ekz64f/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/967387/tftp-deploy-f4ekz64f/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 56:32:f8:0a:a7:a9 T eth0: DHCP client bound to address 10.8.254.225 Loading ARM Linux zImage '/mnt/tftp/967387/tftp-deploy-f4ekz64f/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x13157000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/967387/tftp-deploy-f4ekz64f/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x1905f3a5 Loading devicetree from '/mnt/tftp/967387/tftp-deploy-f4ekz64f/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x13157000, initrd at 0x18000000, oftree at 0x19060000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.31 (KernelCI@build-j1608380-arm-gcc-10-multi-v7-defconfig-xm76d) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Jun 5 09:04:20 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1969720K/2097152K available (14336K kernel code, 2468K rwdata, 6004K rodata, 2048K init, 429K bss, 61896K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000020] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.004030] Console: colour dummy device 80x30 [ 0.004084] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.004099] pid_max: default: 32768 minimum: 301 [ 0.004297] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004323] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005002] CPU: Testing write buffer coherency: ok [ 0.005060] CPU0: Spectre v2: using BPIALL workaround [ 0.005389] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006328] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.008021] rcu: Hierarchical SRCU implementation. [ 0.008027] rcu: Max phase no-delay instances is 1000. [ 0.011704] EFI services will not be available. [ 0.012081] smp: Bringing up secondary CPUs ... [ 0.012950] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.012967] CPU1: Spectre v2: using BPIALL workaround [ 0.013926] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.013943] CPU2: Spectre v2: using BPIALL workaround [ 0.014871] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.014886] CPU3: Spectre v2: using BPIALL workaround [ 0.014993] smp: Brought up 1 node, 4 CPUs [ 0.015007] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.015017] CPU: All CPU(s) started in SVC mode. [ 0.015683] devtmpfs: initialized [ 0.023102] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.023330] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.023351] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.026725] pinctrl core: initialized pinctrl subsystem [ 0.030429] DMI not present or invalid. [ 0.031236] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.034378] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.037098] thermal_sys: Registered thermal governor 'step_wise' [ 0.037178] cpuidle: using governor menu [ 0.037396] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.045427] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2800000 [ 0.045501] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 [ 0.066767] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2100000/i2c@21a4000/camera@3c [ 0.076890] No ATAGs? [ 0.077051] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.077063] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.080399] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.087639] Serial: AMBA PL011 UART driver [ 0.125808] iommu: Default domain type: Translated [ 0.125818] iommu: DMA domain TLB invalidation policy: strict mode [ 0.126621] SCSI subsystem initialized [ 0.127134] usbcore: registered new interface driver usbfs [ 0.127181] usbcore: registered new interface driver hub [ 0.127222] usbcore: registered new device driver usb [ 0.127470] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 0.127635] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 0.127791] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 0.127912] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 0.129621] i2c i2c-0: IMX I2C adapter registered [ 0.131318] i2c i2c-1: IMX I2C adapter registered [ 0.132495] i2c i2c-2: IMX I2C adapter registered [ 0.133997] pps_core: LinuxPPS API ver. 1 registered [ 0.134005] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.134026] PTP clock support registered [ 0.134283] EDAC MC: Ver: 3.0.0 [ 0.137898] vgaarb: loaded [ 1.336196] clocksource: Switched to clocksource mxc_timer1 [ 1.347760] NET: Registered PF_INET protocol family [ 1.348206] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.350149] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.350186] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.350202] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.350291] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.350569] TCP: Hash tables configured (established 8192 bind 8192) [ 1.350781] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.350829] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.351049] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.351786] RPC: Registered named UNIX socket transport module. [ 1.351797] RPC: Registered udp transport module. [ 1.351801] RPC: Registered tcp transport module. [ 1.351808] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.351818] PCI: CLS 0 bytes, default 64 [ 1.352518] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 1.352807] Trying to unpack rootfs image as initramfs... [ 1.377952] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.380103] Initialise system trusted keyrings [ 1.380410] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.386589] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.387369] NFS: Registering the id_resolver key type [ 1.387412] Key type id_resolver registered [ 1.387419] Key type id_legacy registered [ 1.387517] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.387526] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.387562] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.388068] Key type asymmetric registered [ 1.388079] Asymmetric key parser 'x509' registered [ 1.388255] bounce: pool size: 64 pages [ 1.388381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.388391] io scheduler mq-deadline registered [ 1.388399] io scheduler kyber registered [ 1.438098] mxs-dma 110000.dma-apbh: initialized [ 1.519205] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 1.524537] SuperH (H)SCI(F) driver initialized [ 1.525636] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 269, base_baud = 5000000) is a IMX [ 2.357894] printk: console [ttymxc0] enabled [ 2.363505] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 270, base_baud = 5000000) is a IMX [ 2.373900] msm_serial: driver initialized [ 2.378055] STMicroelectronics ASC driver initialized [ 2.385115] STM32 USART driver initialized [ 2.412249] brd: module loaded [ 2.423072] loop: module loaded [ 2.430442] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.438415] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.446449] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.454639] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.462451] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 2.469992] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 2.477343] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 2.487844] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.494849] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.503707] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.514650] scsi host0: ahci-imx [ 2.518330] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 271 [ 2.540404] CAN device driver interface [ 2.546132] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 2.556040] pps pps0: new PPS source ptp0 [ 2.856981] ata1: SATA link down (SStatus 0 SControl 300) [ 2.858760] Freeing initrd memory: 16768K [ 2.862470] ahci-imx 2200000.sata: no device found, disabling link. [ 2.866896] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 2.872758] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 2.883171] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware [ 2.905877] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.913327] e1000e: Intel(R) PRO/1000 Network Driver [ 2.918331] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.924328] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.929760] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.942056] pegasus: Pegasus/Pegasus II USB Ethernet driver [ 2.947702] usbcore: registered new interface driver pegasus [ 2.953419] usbcore: registered new interface driver asix [ 2.958886] usbcore: registered new interface driver ax88179_178a [ 2.965016] usbcore: registered new interface driver cdc_ether [ 2.970919] usbcore: registered new interface driver smsc75xx [ 2.976734] usbcore: registered new interface driver smsc95xx [ 2.982516] usbcore: registered new interface driver net1080 [ 2.988244] usbcore: registered new interface driver cdc_subset [ 2.994200] usbcore: registered new interface driver zaurus [ 2.999865] usbcore: registered new interface driver cdc_ncm [ 3.012145] usbcore: registered new interface driver usb-storage [ 3.026951] i2c_dev: i2c /dev entries driver [ 3.055448] sdhci: Secure Digital Host Controller Interface driver [ 3.061668] sdhci: Copyright(c) Pierre Ossman [ 3.069055] Synopsys Designware Multimedia Card Interface Driver [ 3.077703] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.087023] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 3.087496] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 3.097142] ledtrig-cpu: registered to indicate activity on CPUs [ 3.105324] usbcore: registered new interface driver usbhid [ 3.110956] usbhid: USB HID core driver [ 3.125017] NET: Registered PF_INET6 protocol family [ 3.128797] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 3.131719] Segment Routing with IPv6 [ 3.140680] In-situ OAM (IOAM) with IPv6 [ 3.144700] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.151327] NET: Registered PF_PACKET protocol family [ 3.156432] can: controller area network core [ 3.160871] NET: Registered PF_CAN protocol family [ 3.162368] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 3.165671] can: raw protocol [ 3.175542] can: broadcast manager protocol [ 3.179754] can: netlink gateway - max_hops=1 [ 3.184565] Key type dns_resolver registered [ 3.191089] ThumbEE CPU extension supported. [ 3.195377] Registering SWP/SWPB emulation handler [ 3.201248] Loading compiled-in X.509 certificates [ 3.206203] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.216490] mmc0: new high speed SDHC card at address 1234 [ 3.224263] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.232454] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 3.242980] imx_usb 2184200.usb: No over current polarity defined [ 3.253616] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 3.258574] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 3.296288] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 3.303949] hub 1-0:1.0: USB hub found [ 3.307821] hub 1-0:1.0: 1 port detected [ 3.314745] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 3.331694] Freeing unused kernel image (initmem) memory: 2048K [ 3.363412] mmc2: new DDR MMC card at address 0001 [ 3.370241] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.379424] mmcblk2: p1 p2 [ 3.384351] mmcblk2boot0: mmc2:0001 S10004 4.00 MiB [ 3.392059] Run /init as init process [ 3.394741] mmcblk2boot1: mmc2:0001 S10004 4.00 MiB [ 3.405754] mmcblk2rpmb: mmc2:0001 S10004 4.00 MiB, chardev (236:0) Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 3.538631] udevd[127]: starting version 3.2.9 [ 3.596179] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.809159] hub 1-1:1.0: USB hub found [ 3.813878] hub 1-1:1.0: 4 ports detected [ 6.106163] random: crng init done [ 6.117184] udevd[127]: specified user 'tss' unknown [ 6.122281] udevd[127]: specified group 'tss' unknown [ 6.129814] udevd[128]: starting eudev-3.2.9 [ 6.598395] imx-ipuv3 2400000.ipu: IPUv3H probed [ 6.605970] imx-ipuv3 2800000.ipu: IPUv3H probed [ 6.649028] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 6.681519] caam 2100000.crypto: Entropy delay = 3200 [ 6.747458] caam 2100000.crypto: Instantiated RNG4 SH0 [ 6.756250] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 6.771435] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 6.797572] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 6.804237] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 6.808220] caam 2100000.crypto: Instantiated RNG4 SH1 [ 6.815515] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 6.822204] caam 2100000.crypto: job rings = 2, qi = 0 [ 6.831197] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 6.839325] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 6.845446] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 6.905645] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 6.918322] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 7.028483] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) [ 7.056573] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) [ 7.073318] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) [ 7.117978] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) [ 7.126407] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 7.186655] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 7.194643] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 7.202786] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 7.308116] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 7.333808] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 7.432787] fsl-asoc-card sound: ASoC: driver name too long 'imx6-wandboard-sgtl5000' -> 'imx6-wandboard-' [ 7.662435] caam algorithms registered in /proc/crypto [ 7.668902] caam 2100000.crypto: registering rng-caam [ 7.674254] caam 2100000.crypto: rng crypto API alg registered prng-caam done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-967387/environment . /lava-967387/environment / # /lava-967387/bin/lava-test-runner /lava-967387/0 /lava-967387/bin/lava-test-runner /lava-967387/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-967387/0/tests/0_dmesg + cat uuid + UUID=967387_1.5.2.3.1 + set[ 8.461316] +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 8.512306] [ 8.557785] [ 8.603388] + set[ 8.613239] +x / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-967387/environment / # . /lava-967387/environment/lava-967387/bin/lava-test-runner /lava-967387/1 / # /lava-967387/bin/lava-test-runner /lava-967387/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-967387/1/tests/1_bootrr + cat uuid [ 9.114046] + UUID=967387_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-967387/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-967387/1/../bin/lava-test-case [ 9.176434] /lava-967387/1/../bin/lava-test-case [ 9.231749] /lava-967387/1/../bin/lava-test-case [ 9.259676] + set[ 9.280434] +x / #