connecting to NetworkSerialPort(target=Target(name='imx53-qsrb-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4010, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4010 connected to 10.8.254.5 (port 4010) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: Freescale i.MX53 Quick Start-R Board detected i.MX53 revision 2.1 mc13xxx-i2c mc347080: Found MC34708 ID: 0x014 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:04:9f:02:71:b3 imx-usb 53f80200.usb@53f80200.of: USB EHCI 1.00 imx-esdhc 50004000.mmc@50004000.of: registered as mmc0 imx-esdhc 50020000.mmc@50020000.of: registered as mmc2 imx-ipuv3 18000000.ipu@18000000.of: IPUv3M probed netconsole: registered as netconsole-1 malloc space: 0xbfe7d3c0 -> 0xcfcfa77f (size 254.5 MiB) mmc0: detected SD card version 2.0 mmc0: registered mmc0 MCIMX53-START-R board 1.0 rev B envfs: no envfs (magic mismatch) - envfs never written? [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mFreescale i.MX53 Quick Start-R Board:/[0m bootm -v -r /mnt/tftp/995695/tftp-deploy-i81r7vsb/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/995695/tftp-deploy-i81r7vsb/dtb/imx53-qsrb.dtb /mnt/tftp/995695/tftp-deploy-i81r7vsb/kernel/zImage [1;32mbarebox@[1;36mFreescale i.MX53 Quick Start-R Board:/[0m bootm -v -r /mnt/tftp/995695/tftp-deploy-i81r7vsb/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/995695/tftp-deploy-i81r7vsb/dtb/imx53-qsrb.dtb /mnt/tftp/995695/tftp-deploy-i81r7vsb/kernel/zImage eth0: 100Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.168 Loading ARM Linux zImage '/mnt/tftp/995695/tftp-deploy-i81r7vsb/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x73784000 no initrd load address, defaulting to 0x78000000 Loaded initrd GZIP compressed '/mnt/tftp/995695/tftp-deploy-i81r7vsb/ramdisk/ramdisk.cpio.gz' initrd is at 0x78000000-0x789fc94f Loading devicetree from '/mnt/tftp/995695/tftp-deploy-i81r7vsb/dtb/imx53-qsrb.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x73784000, initrd at 0x78000000, oftree at 0x789fd000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.38-cip1 (KernelCI@build-j5333-arm-gcc-10-imx-v6-v7-defconfig-29t2c) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Jul 19 11:51:57 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Freescale i.MX53 Quick Start-R Board [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 64 MiB at 0xca000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000070000000-0x000000008fffffff] [ 0.000000] HighMem [mem 0x0000000090000000-0x00000000cfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000070000000-0x000000008fffffff] [ 0.000000] node 0: [mem 0x00000000b0000000-0x00000000cfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000070000000-0x00000000cfffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 17 pages/cpu s38388 r8192 d23052 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 261120 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 931492K/1048576K available (15360K kernel code, 2191K rwdata, 5092K rodata, 1024K init, 6673K bss, 51548K reserved, 65536K cma-reserved, 457624K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] TrustZone Interrupt Controller (TZIC) initialized [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU identified as i.MX53, silicon rev 2.1 [ 0.000000] Switching to timer-based delay loop, resolution 25ns [ 0.000004] sched_clock: 32 bits at 40MHz, resolution 25ns, wraps every 53687091187ns [ 0.000027] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 47781511156 ns [ 0.001849] Console: colour dummy device 80x30 [ 0.001938] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001951] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001964] ... MAX_LOCK_DEPTH: 48 [ 0.001975] ... MAX_LOCKDEP_KEYS: 8192 [ 0.001986] ... CLASSHASH_SIZE: 4096 [ 0.001997] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002008] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002018] ... CHAINHASH_SIZE: 32768 [ 0.002029] memory used by lock dependency info: 4061 kB [ 0.002040] memory used for stack traces: 2112 kB [ 0.002050] per task-struct memory footprint: 1536 bytes [ 0.002174] Calibrating delay loop (skipped), value calculated using timer frequency.. 80.00 BogoMIPS (lpj=400000) [ 0.002213] pid_max: default: 32768 minimum: 301 [ 0.002889] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.002925] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.007103] CPU: Testing write buffer coherency: ok [ 0.007290] CPU0: Spectre v2: using BPIALL workaround [ 0.008898] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.013127] cblist_init_generic: Setting adjustable number of callback queues. [ 0.013209] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.013703] Running RCU-tasks wait API self tests [ 0.014087] Setting up static identity map for 0x70100000 - 0x70100078 [ 0.014833] Callback from call_rcu_tasks_trace() invoked. [ 0.015149] rcu: Hierarchical SRCU implementation. [ 0.015166] rcu: Max phase no-delay instances is 1000. [ 0.017792] smp: Bringing up secondary CPUs ... [ 0.017817] smp: Brought up 1 node, 1 CPU [ 0.017838] SMP: Total of 1 processors activated (80.00 BogoMIPS). [ 0.017855] CPU: All CPU(s) started in SVC mode. [ 0.021339] devtmpfs: initialized [ 0.056979] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 [ 0.059773] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.059861] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.066338] pinctrl core: initialized pinctrl subsystem [ 0.073966] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.100520] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.118023] thermal_sys: Registered thermal governor 'step_wise' [ 0.118495] cpuidle: using governor menu [ 0.119660] No ATAGs? [ 0.119691] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.135523] platform 18000000.ipu: Fixed dependency cycle(s) with /soc/bus@60000000/tve@63ff0000 [ 0.155257] imx53-pinctrl 53fa8000.iomuxc: initialized IMX pinctrl driver [ 0.227570] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.320677] SCSI subsystem initialized [ 1.323154] usbcore: registered new interface driver usbfs [ 1.323451] usbcore: registered new interface driver hub [ 1.323626] usbcore: registered new device driver usb [ 1.324109] usb_phy_generic usbphy-0: supply vcc not found, using dummy regulator [ 1.325400] usb_phy_generic usbphy-0: dummy supplies not allowed for exclusive requests [ 1.326044] usb_phy_generic usbphy-1: supply vcc not found, using dummy regulator [ 1.326829] usb_phy_generic usbphy-1: dummy supplies not allowed for exclusive requests [ 1.332518] i2c i2c-1: IMX I2C adapter registered [ 1.362225] mc13xxx 0-0008: mc34708: rev 2.4, fin: 0, fab: 0 [ 1.445126] i2c i2c-0: IMX I2C adapter registered [ 1.446283] mc: Linux media interface: v0.10 [ 1.446672] videodev: Linux video capture interface: v2.00 [ 1.447488] pps_core: LinuxPPS API ver. 1 registered [ 1.447510] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.447589] PTP clock support registered [ 1.450316] Advanced Linux Sound Architecture Driver Initialized. [ 1.455760] Bluetooth: Core ver 2.22 [ 1.455967] NET: Registered PF_BLUETOOTH protocol family [ 1.455983] Bluetooth: HCI device and connection manager initialized [ 1.456153] Bluetooth: HCI socket layer initialized [ 1.456189] Bluetooth: L2CAP socket layer initialized [ 1.456369] Bluetooth: SCO socket layer initialized [ 1.459496] vgaarb: loaded [ 1.462049] clocksource: Switched to clocksource mxc_timer1 [ 1.474340] VFS: Disk quotas dquot_6.6.0 [ 1.474555] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.537725] NET: Registered PF_INET protocol family [ 1.538798] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.553879] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 10240 bytes, linear) [ 1.553984] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.554033] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 1.554232] TCP bind hash table entries: 4096 (order: 6, 327680 bytes, linear) [ 1.555571] TCP: Hash tables configured (established 4096 bind 4096) [ 1.556246] UDP hash table entries: 256 (order: 2, 24576 bytes, linear) [ 1.556399] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear) [ 1.556961] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.560461] RPC: Registered named UNIX socket transport module. [ 1.560528] RPC: Registered udp transport module. [ 1.560543] RPC: Registered tcp transport module. [ 1.560557] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.562901] PCI: CLS 0 bytes, default 64 [ 1.565888] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.585162] Trying to unpack rootfs image as initramfs... [ 1.592652] Initialise system trusted keyrings [ 1.603594] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 1.684250] NFS: Registering the id_resolver key type [ 1.684492] Key type id_resolver registered [ 1.684544] Key type id_legacy registered [ 1.685635] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.685795] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.686049] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.687916] fuse: init (API version 7.37) [ 1.952481] Key type asymmetric registered [ 1.952823] Asymmetric key parser 'x509' registered [ 1.953773] bounce: pool size: 64 pages [ 1.954299] io scheduler mq-deadline registered [ 1.954331] io scheduler kyber registered [ 2.020861] 53fbc000.serial: ttymxc0 at MMIO 0x53fbc000 (irq = 47, base_baud = 4166666) is a IMX [ 4.092584] printk: console [ttymxc0] enabled [ 4.135144] Stack Depot allocating hash table of 32768 entries with kvcalloc [ 4.153848] [drm] using 16m VRAM carveout [ 4.175645] msm msm: [drm:msm_drm_bind] VRAM: ca100000->cb100000 [ 4.192840] adreno 30000000.gpu: Could not find a clock rate. Using a reasonable default [ 4.213931] adreno 30000000.gpu: supply vdd not found, using dummy regulator [ 4.233603] adreno 30000000.gpu: supply vddcx not found, using dummy regulator [ 4.263265] msm msm: bound 30000000.gpu (ops a3xx_ops) [ 4.285438] [drm] Initialized msm 1.9.0 20130625 for msm on minor 0 [ 4.324436] seiko_panel panel: supply dvdd not found, using dummy regulator [ 4.343168] seiko_panel panel: supply avdd not found, using dummy regulator [ 4.386561] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 4.403241] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 4.411383] imx-drm display-subsystem: bound 63ff0000.tve (ops imx_tve_ops) [ 4.445119] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 4.553644] Console: switching to colour frame buffer device 128x48 [ 4.592370] imx-drm display-subsystem: [drm] fb0: imx-drmdrmfb frame buffer device [ 4.603181] imx-ipuv3 18000000.ipu: IPUv3M probed [ 4.695930] Freeing initrd memory: 10228K [ 4.721178] brd: module loaded [ 4.756177] loop: module loaded [ 4.762219] ahci-imx 10000000.sata: supply ahci not found, using dummy regulator [ 4.770584] ahci-imx 10000000.sata: supply phy not found, using dummy regulator [ 4.778465] ahci-imx 10000000.sata: supply target not found, using dummy regulator [ 4.787725] ahci-imx 10000000.sata: hwmon0: sensor 'sata_ahci' [ 4.796632] ahci-imx 10000000.sata: SSS flag set, parallel bus scan disabled [ 4.803961] ahci-imx 10000000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 4.812953] ahci-imx 10000000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc [ 4.829234] scsi host0: ahci-imx [ 4.835133] ata1: SATA max UDMA/133 mmio [mem 0x10000000-0x10000fff] port 0x100 irq 44 [ 4.858617] CAN device driver interface [ 4.929240] usbcore: registered new interface driver r8152 [ 4.935436] usbcore: registered new interface driver lan78xx [ 4.941306] usbcore: registered new interface driver asix [ 4.947144] usbcore: registered new interface driver ax88179_178a [ 4.953722] usbcore: registered new interface driver cdc_ether [ 4.959761] usbcore: registered new interface driver smsc95xx [ 4.965969] usbcore: registered new interface driver net1080 [ 4.971778] usbcore: registered new interface driver cdc_subset [ 4.977976] usbcore: registered new interface driver zaurus [ 4.983858] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 4.991614] usbcore: registered new interface driver cdc_ncm [ 4.997542] usbcore: registered new interface driver r8153_ecm [ 5.003849] usbcore: registered new interface driver usb-storage [ 5.018909] SPI driver ads7846 has no spi_device_id for ti,tsc2046 [ 5.025333] SPI driver ads7846 has no spi_device_id for ti,ads7843 [ 5.031624] SPI driver ads7846 has no spi_device_id for ti,ads7845 [ 5.037906] SPI driver ads7846 has no spi_device_id for ti,ads7873 [ 5.048636] input: mma8450 as /devices/platform/soc/60000000.bus/63fc8000.i2c/i2c-0/0-001c/input/input0 [ 5.070513] mxc_rtc_v2 53fa4000.rtc: registered as rtc0 [ 5.076577] mxc_rtc_v2 53fa4000.rtc: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 5.087040] i2c_dev: i2c /dev entries driver [ 5.106963] Bluetooth: HCI UART driver ver 2.3 [ 5.111605] Bluetooth: HCI UART protocol H4 registered [ 5.117194] Bluetooth: HCI UART protocol LL registered [ 5.132612] sdhci: Secure Digital Host Controller Interface driver [ 5.138934] sdhci: Copyright(c) Pierre Ossman [ 5.143440] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.153032] sdhci-esdhc-imx 50004000.mmc: Got CD GPIO [ 5.164340] sdhci-esdhc-imx 50020000.mmc: Got CD GPIO [ 5.169636] sdhci-esdhc-imx 50020000.mmc: Got WP GPIO [ 5.175044] ata1: SATA link down (SStatus 0 SControl 300) [ 5.180857] ahci-imx 10000000.sata: no device found, disabling link. [ 5.187523] ahci-imx 10000000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 5.224449] sahara 63ff8000.crypto: SAHARA version 4 initialized [ 5.232972] usbcore: registered new interface driver usbhid [ 5.238699] usbhid: USB HID core driver [ 5.244444] mmc0: SDHCI controller on 50004000.mmc [50004000.mmc] using ADMA [ 5.259092] mmc2: SDHCI controller on 50020000.mmc [50020000.mmc] using ADMA [ 5.273996] imx-ipuv3-csi imx-ipuv3-csi.0: Registered ipu1_csi0 capture as /dev/video0 [ 5.285747] imx-ipuv3 18000000.ipu: Registered ipu1_ic_prpenc capture as /dev/video1 [ 5.295161] imx-ipuv3 18000000.ipu: Registered ipu1_ic_prpvf capture as /dev/video2 [ 5.306085] imx-ipuv3-csi imx-ipuv3-csi.1: Registered ipu1_csi1 capture as /dev/video3 [ 5.320323] mmc0: host does not support reading read-only switch, assuming write-enable [ 5.331597] imx-media: Registered ipu_ic_pp csc/scaler as /dev/video4 [ 5.341062] mmc0: new high speed SDHC card at address 0001 [ 5.359874] mmcblk0: mmc0:0001 SD16G 14.6 GiB [ 5.378780] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 5.400098] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 5.462145] fsl-ssi-dai 50014000.ssi: No cache defaults, reading back from HW [ 5.480658] NET: Registered PF_INET6 protocol family [ 5.497064] Segment Routing with IPv6 [ 5.501043] In-situ OAM (IOAM) with IPv6 [ 5.505347] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.514789] NET: Registered PF_PACKET protocol family [ 5.519906] can: controller area network core [ 5.524929] NET: Registered PF_CAN protocol family [ 5.529771] can: raw protocol [ 5.533227] can: broadcast manager protocol [ 5.537506] can: netlink gateway - max_hops=1 [ 5.543067] Key type dns_resolver registered [ 5.549310] Registering SWP/SWPB emulation handler [ 5.555929] Loading compiled-in X.509 certificates [ 5.723126] imx_usb 53f80000.usb: No over current polarity defined [ 5.748257] imx_usb 53f80200.usb: No over current polarity defined [ 5.760839] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 5.766795] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 5.802221] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 5.809923] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.818690] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.826454] usb usb1: Product: EHCI Host Controller [ 5.831452] usb usb1: Manufacturer: Linux 6.1.38-cip1 ehci_hcd [ 5.837430] usb usb1: SerialNumber: ci_hdrc.1 [ 5.851245] hub 1-0:1.0: USB hub found [ 5.858148] hub 1-0:1.0: 1 port detected [ 5.874805] fsl-ssi-dai 50014000.ssi: No cache defaults, reading back from HW [ 5.890549] fsl-ssi-dai 50014000.ssi: No cache defaults, reading back from HW [ 5.908719] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 5.926100] fsl-ssi-dai 50014000.ssi: No cache defaults, reading back from HW [ 5.934440] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.019620] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.029380] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 6.038533] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 6.047698] ALSA device list: [ 6.051140] No soundcards found. [ 6.060168] Freeing unused kernel image (initmem) memory: 1024K [ 6.109796] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 6.803901] udevd[130]: starting version 3.2.9 [ 9.062592] random: crng init done [ 9.087611] udevd[130]: specified user 'tss' unknown [ 9.093946] udevd[130]: specified group 'tss' unknown [ 9.127597] udevd[131]: starting eudev-3.2.9 [ 12.420888] imx-sdma 63fb0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx53.bin failed with error -2 [ 12.431680] imx-sdma 63fb0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx53.bin [ 12.457645] fsl-ssi-dai 50014000.ssi: No cache defaults, reading back from HW [ 12.556309] coda 63ff4000.vpu: error -ENXIO: IRQ bit not found [ 12.623499] coda 63ff4000.vpu: Direct firmware load for vpu_fw_imx53.bin failed with error -2 [ 12.632325] coda 63ff4000.vpu: Falling back to sysfs fallback for: vpu_fw_imx53.bin [ 12.728051] fsl-asoc-card sound: ASoC: driver name too long 'imx53-qsb-sgtl5000' -> 'imx53-qsb-sgtl5' done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-995695/environment . /lava-995695/environment / # /lava-995695/bin/lava-test-runner /lava-995695/0 /lava-995695/bin/lava-test-runner /lava-995695/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-995695/0/tests/0_dmesg + cat uuid + UUID=995695_1.5.2.3.1[ 14.865674] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 15.048737] [ 15.206818] [ 15.363820] + set +x [ 15.377432] # / # #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-995695/environment / # . /lava-995695/environment/lava-995695/bin/lava-test-runner /lava-995695/1 / # /lava-995695/bin/lava-test-runner /lava-995695/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-995695/1/tests/1_bootrr + cat uuid + UUID=995695_1.5.2.3.5[ 16.097746] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-995695/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-995695/1/../bin/lava-test-case [ 16.313971] /lava-995695/1/../bin/lava-test-case [ 16.461322] /lava-995695/1/../bin/lava-test-case [ 16.586020] + set +x [ 16.646190] / #