connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/995701/tftp-deploy-wd5cdmi6/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/995701/tftp-deploy-wd5cdmi6/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/995701/tftp-deploy-wd5cdmi6/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/995701/tftp-deploy-wd5cdmi6/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/995701/tftp-deploy-wd5cdmi6/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/995701/tftp-deploy-wd5cdmi6/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address c2:e0:7d:35:43:1a T eth0: DHCP client bound to address 10.8.254.245 Loading ARM Linux zImage '/mnt/tftp/995701/tftp-deploy-wd5cdmi6/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x13157000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/995701/tftp-deploy-wd5cdmi6/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x1905f50c Loading devicetree from '/mnt/tftp/995701/tftp-deploy-wd5cdmi6/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x13157000, initrd at 0x18000000, oftree at 0x19060000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.38-cip1 (KernelCI@build-j5365-arm-gcc-10-multi-v7-defconfig-94k72) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Jul 19 12:25:25 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1969720K/2097152K available (14336K kernel code, 2468K rwdata, 6008K rodata, 2048K init, 429K bss, 61896K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000021] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.004019] Console: colour dummy device 80x30 [ 0.004072] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.004087] pid_max: default: 32768 minimum: 301 [ 0.004291] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004316] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004989] CPU: Testing write buffer coherency: ok [ 0.005045] CPU0: Spectre v2: using BPIALL workaround [ 0.005379] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006299] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.008015] rcu: Hierarchical SRCU implementation. [ 0.008021] rcu: Max phase no-delay instances is 1000. [ 0.011701] EFI services will not be available. [ 0.012082] smp: Bringing up secondary CPUs ... [ 0.012949] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.012967] CPU1: Spectre v2: using BPIALL workaround [ 0.013933] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.013950] CPU2: Spectre v2: using BPIALL workaround [ 0.014876] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.014893] CPU3: Spectre v2: using BPIALL workaround [ 0.015001] smp: Brought up 1 node, 4 CPUs [ 0.015012] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.015024] CPU: All CPU(s) started in SVC mode. [ 0.015692] devtmpfs: initialized [ 0.023534] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.023759] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.023782] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.027140] pinctrl core: initialized pinctrl subsystem [ 0.030835] DMI not present or invalid. [ 0.031634] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.034736] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.037461] thermal_sys: Registered thermal governor 'step_wise' [ 0.037529] cpuidle: using governor menu [ 0.037746] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.046190] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2800000 [ 0.046270] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 [ 0.067820] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2100000/i2c@21a4000/camera@3c [ 0.078070] No ATAGs? [ 0.078233] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.078244] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.081552] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.088766] Serial: AMBA PL011 UART driver [ 0.126024] iommu: Default domain type: Translated [ 0.126037] iommu: DMA domain TLB invalidation policy: strict mode [ 0.126848] SCSI subsystem initialized [ 0.127363] usbcore: registered new interface driver usbfs [ 0.127411] usbcore: registered new interface driver hub [ 0.127455] usbcore: registered new device driver usb [ 0.127702] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 0.127865] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 0.128022] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 0.128154] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 0.129866] i2c i2c-0: IMX I2C adapter registered [ 0.131536] i2c i2c-1: IMX I2C adapter registered [ 0.132695] i2c i2c-2: IMX I2C adapter registered [ 0.134195] pps_core: LinuxPPS API ver. 1 registered [ 0.134203] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.134224] PTP clock support registered [ 0.134487] EDAC MC: Ver: 3.0.0 [ 0.138064] vgaarb: loaded [ 1.333530] clocksource: Switched to clocksource mxc_timer1 [ 1.344997] NET: Registered PF_INET protocol family [ 1.345435] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.347421] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.347454] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.347473] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.347562] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.347846] TCP: Hash tables configured (established 8192 bind 8192) [ 1.348055] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.348114] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.348333] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.349062] RPC: Registered named UNIX socket transport module. [ 1.349073] RPC: Registered udp transport module. [ 1.349077] RPC: Registered tcp transport module. [ 1.349082] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.349091] PCI: CLS 0 bytes, default 64 [ 1.349734] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 1.350385] Trying to unpack rootfs image as initramfs... [ 1.374270] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.376426] Initialise system trusted keyrings [ 1.376754] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.382886] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.383782] NFS: Registering the id_resolver key type [ 1.383827] Key type id_resolver registered [ 1.383833] Key type id_legacy registered [ 1.383934] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.383943] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.383978] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.384470] Key type asymmetric registered [ 1.384482] Asymmetric key parser 'x509' registered [ 1.384661] bounce: pool size: 64 pages [ 1.384788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.384797] io scheduler mq-deadline registered [ 1.384804] io scheduler kyber registered [ 1.435760] mxs-dma 110000.dma-apbh: initialized [ 1.517372] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 1.522808] SuperH (H)SCI(F) driver initialized [ 1.523985] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 269, base_baud = 5000000) is a IMX [ 2.356571] printk: console [ttymxc0] enabled [ 2.362265] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 270, base_baud = 5000000) is a IMX [ 2.372660] msm_serial: driver initialized [ 2.376820] STMicroelectronics ASC driver initialized [ 2.384022] STM32 USART driver initialized [ 2.411493] brd: module loaded [ 2.422212] loop: module loaded [ 2.429674] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.437654] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.445703] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.453920] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.461697] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 2.469251] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 2.476593] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 2.487092] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.494136] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.502947] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.514721] scsi host0: ahci-imx [ 2.518351] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 271 [ 2.540623] CAN device driver interface [ 2.546544] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 2.556404] pps pps0: new PPS source ptp0 [ 2.855326] ata1: SATA link down (SStatus 0 SControl 300) [ 2.860876] ahci-imx 2200000.sata: no device found, disabling link. [ 2.867320] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 2.871225] Freeing initrd memory: 16768K [ 2.878775] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 2.889225] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware [ 2.918369] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.925821] e1000e: Intel(R) PRO/1000 Network Driver [ 2.930796] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.936814] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.942222] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.954602] pegasus: Pegasus/Pegasus II USB Ethernet driver [ 2.960236] usbcore: registered new interface driver pegasus [ 2.965978] usbcore: registered new interface driver asix [ 2.971418] usbcore: registered new interface driver ax88179_178a [ 2.977573] usbcore: registered new interface driver cdc_ether [ 2.983453] usbcore: registered new interface driver smsc75xx [ 2.989274] usbcore: registered new interface driver smsc95xx [ 2.995087] usbcore: registered new interface driver net1080 [ 3.000790] usbcore: registered new interface driver cdc_subset [ 3.006771] usbcore: registered new interface driver zaurus [ 3.012415] usbcore: registered new interface driver cdc_ncm [ 3.025056] usbcore: registered new interface driver usb-storage [ 3.039876] i2c_dev: i2c /dev entries driver [ 3.068676] sdhci: Secure Digital Host Controller Interface driver [ 3.074898] sdhci: Copyright(c) Pierre Ossman [ 3.082325] Synopsys Designware Multimedia Card Interface Driver [ 3.091044] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.102561] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 3.103263] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 3.112685] ledtrig-cpu: registered to indicate activity on CPUs [ 3.121033] usbcore: registered new interface driver usbhid [ 3.126647] usbhid: USB HID core driver [ 3.140819] NET: Registered PF_INET6 protocol family [ 3.144343] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 3.147397] Segment Routing with IPv6 [ 3.156455] In-situ OAM (IOAM) with IPv6 [ 3.160475] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.167118] NET: Registered PF_PACKET protocol family [ 3.172183] can: controller area network core [ 3.176334] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 3.176654] NET: Registered PF_CAN protocol family [ 3.188256] can: raw protocol [ 3.191238] can: broadcast manager protocol [ 3.195459] can: netlink gateway - max_hops=1 [ 3.200239] Key type dns_resolver registered [ 3.206848] ThumbEE CPU extension supported. [ 3.211141] Registering SWP/SWPB emulation handler [ 3.217218] Loading compiled-in X.509 certificates [ 3.245715] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 3.258811] imx_usb 2184200.usb: No over current polarity defined [ 3.269408] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 3.274368] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 3.286171] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.296433] mmc0: new high speed SDHC card at address 1234 [ 3.303013] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.313538] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 3.319758] hub 1-0:1.0: USB hub found [ 3.323630] hub 1-0:1.0: 1 port detected [ 3.333264] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 3.350436] Freeing unused kernel image (initmem) memory: 2048K [ 3.359849] mmc2: new DDR MMC card at address 0001 [ 3.365838] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.372779] mmcblk2: p1 p2 [ 3.376710] mmcblk2boot0: mmc2:0001 S10004 4.00 MiB [ 3.384471] Run /init as init process [ 3.384613] mmcblk2boot1: mmc2:0001 S10004 4.00 MiB [ 3.395725] mmcblk2rpmb: mmc2:0001 S10004 4.00 MiB, chardev (236:0) Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 3.528203] udevd[121]: starting version 3.2.9 [ 3.633507] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.846378] hub 1-1:1.0: USB hub found [ 3.851100] hub 1-1:1.0: 4 ports detected [ 6.163499] random: crng init done [ 6.174653] udevd[121]: specified user 'tss' unknown [ 6.179751] udevd[121]: specified group 'tss' unknown [ 6.187895] udevd[122]: starting eudev-3.2.9 [ 6.619035] imx-ipuv3 2400000.ipu: IPUv3H probed [ 6.636973] imx-ipuv3 2800000.ipu: IPUv3H probed [ 6.675925] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 6.741247] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 6.748725] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 6.756131] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 6.762772] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 6.769539] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 6.775666] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 6.781775] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 6.804212] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 6.824495] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) [ 6.873707] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) [ 6.924034] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) [ 6.947720] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 6.983725] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) [ 6.992032] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 7.032090] caam 2100000.crypto: Entropy delay = 3200 [ 7.098012] caam 2100000.crypto: Instantiated RNG4 SH0 [ 7.133836] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 7.141777] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 7.149577] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 7.158773] caam 2100000.crypto: Instantiated RNG4 SH1 [ 7.163960] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 7.170587] caam 2100000.crypto: job rings = 2, qi = 0 [ 7.364449] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 7.382422] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 7.481872] fsl-asoc-card sound: ASoC: driver name too long 'imx6-wandboard-sgtl5000' -> 'imx6-wandboard-' [ 7.692232] caam algorithms registered in /proc/crypto [ 7.698867] caam 2100000.crypto: registering rng-caam [ 7.704507] caam 2100000.crypto: rng crypto API alg registered prng-caam done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-995701/environment . /lava-995701/environment / # /lava-995701/bin/lava-test-runner /lava-995701/0 /lava-995701/bin/lava-test-runner /lava-995701/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-995701/0/tests/0_dmesg + cat uuid + UUID=995701_1.5.2.3.1 + set [ 8.442167] +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 8.493526] [ 8.538682] [ 8.584302] + set[ 8.594239] +x / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-995701/environment / # . /lava-995701/environment/lava-995701/bin/lava-test-runner /lava-995701/1 / # /lava-995701/bin/lava-test-runner /lava-995701/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-995701/1/tests/1_bootrr + cat uuid + UUID=995701_1.5.2.3.5 + set [ 9.093720] +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-995701/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-995701/1/../bin/lava-test-case [ 9.158256] /lava-995701/1/../bin/lava-test-case [ 9.203381] /lava-995701/1/../bin/lava-test-case [ 9.231102] + set[ 9.251503] +x / #