[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.14 (259 ms) U-Boot> setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 U-Boot> tftp 0x01000000 11118386/tftp-deploy-t1nilawk/kernel/zImage tftp 0x01000000 11118386/tftp-deploy-t1nilawk/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11118386/tftp-deploy-t1nilawk/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################# 549.8 KiB/s done Bytes transferred = 6139032 (5dac98 hex) U-Boot> tftp 0x02200000 11118386/tftp-deploy-t1nilawk/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 11118386/tftp-deploy-t1nilawk/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11118386/tftp-deploy-t1nilawk/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################## 1004.9 KiB/s done Bytes transferred = 9309632 (8e0dc0 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 11118386/tftp-deploy-t1nilawk/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 11118386/tftp-deploy-t1nilawk/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11118386/tftp-deploy-t1nilawk/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 877 KiB/s done Bytes transferred = 14374 (3826 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x5dac98 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9309568 Bytes = 8.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006925 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.38-cip1 (KernelCI@build-j6602-arm-gcc-10-bcm2835-defconfig-dsgxg) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Thu Jul 20 11:11:22 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:130 arm_dt_init_cpu_maps+0xec/0x15c [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.1.38-cip1 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] unwind_backtrace from show_stack+0x18/0x1c [ 0.000000] show_stack from dump_stack_lvl+0x24/0x2c [ 0.000000] dump_stack_lvl from __warn+0x88/0xec [ 0.000000] __warn from warn_slowpath_fmt+0x7c/0xb0 [ 0.000000] warn_slowpath_fmt from arm_dt_init_cpu_maps+0xec/0x15c [ 0.000000] arm_dt_init_cpu_maps from setup_arch+0x25c/0x618 [ 0.000000] setup_arch from start_kernel+0x5c/0x684 [ 0.000000] start_kernel from 0x0 [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689180K/786432K available (8192K kernel code, 1684K rwdata, 3160K rodata, 1024K init, 453K bss, 31716K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 35413 entries in 104 pages <6>[ 0.000000] ftrace: allocated 104 pages with 3 groups <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008815] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018642] bcm2835: system timer (irq = 27) <6>[ 0.023682] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030181] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041458] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049897] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056720] Console: colour dummy device 80x30 <6>[ 0.061592] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072439] pid_max: default: 32768 minimum: 301 <6>[ 0.077799] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.085554] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.094666] CPU: Testing write buffer coherency: ok <6>[ 0.101105] cblist_init_generic: Setting adjustable number of callback queues. <6>[ 0.108755] cblist_init_generic: Setting shift to 0 and lim to 1. <6>[ 0.115460] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.123774] devtmpfs: initialized <6>[ 0.133723] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.142114] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.152442] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.163107] pinctrl core: initialized pinctrl subsystem <6>[ 0.170970] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.179052] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.189636] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.189898] No ATAGs? <6>[ 0.198922] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.207352] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.213868] Serial: AMBA PL011 UART driver <6>[ 0.237024] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <5>[ 0.517798] SCSI subsystem initialized <6>[ 0.522229] usbcore: registered new interface driver usbfs <6>[ 0.528224] usbcore: registered new interface driver hub <6>[ 0.533962] usbcore: registered new device driver usb <4>[ 0.539647] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.547316] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.555658] mc: Linux media interface: v0.10 <6>[ 0.560323] videodev: Linux video capture interface: v2.00 <6>[ 0.566324] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.571653] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.581274] PTP clock support registered <6>[ 0.585747] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.592969] Bluetooth: Core ver 2.22 <6>[ 0.596956] NET: Registered PF_BLUETOOTH protocol family <6>[ 0.602661] Bluetooth: HCI device and connection manager initialized <6>[ 0.609420] Bluetooth: HCI socket layer initialized <6>[ 0.614674] Bluetooth: L2CAP socket layer initialized <6>[ 0.620103] Bluetooth: SCO socket layer initialized <6>[ 0.626188] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.645014] NET: Registered PF_INET protocol family <6>[ 0.650820] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.661555] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.670495] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.678706] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.686963] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.694735] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.701734] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.708725] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.716347] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.723071] RPC: Registered named UNIX socket transport module. <6>[ 0.729426] RPC: Registered udp transport module. <6>[ 0.734490] RPC: Registered tcp transport module. <6>[ 0.739557] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.749229] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <6>[ 0.758136] Unpacking initramfs... <5>[ 0.778470] Initialise system trusted keyrings <6>[ 0.783747] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <5>[ 1.126335] Key type asymmetric registered <5>[ 1.130844] Asymmetric key parser 'x509' registered <6>[ 1.146888] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 1.154737] io scheduler mq-deadline registered <6>[ 1.159655] io scheduler kyber registered <6>[ 1.189389] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes <6>[ 1.198458] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 1.229459] Console: switching to colour frame buffer device 82x26 <6>[ 1.247095] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 1.276665] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.302039] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.327123] usbcore: registered new interface driver zd1211rw <6>[ 1.333368] usbcore: registered new interface driver lan78xx <6>[ 1.346846] usbcore: registered new interface driver asix <6>[ 1.352728] usbcore: registered new interface driver ax88179_178a <6>[ 1.376616] usbcore: registered new interface driver cdc_ether <6>[ 1.382963] usbcore: registered new interface driver smsc95xx <6>[ 1.406675] usbcore: registered new interface driver net1080 <6>[ 1.412839] usbcore: registered new interface driver cdc_subset <6>[ 1.427130] usbcore: registered new interface driver zaurus <6>[ 1.433263] usbcore: registered new interface driver cdc_ncm <6>[ 1.456694] usbcore: registered new interface driver r8153_ecm <6>[ 1.463722] usbcore: registered new interface driver usb-storage <6>[ 1.477214] i2c_dev: i2c /dev entries driver <4>[ 1.487086] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.509121] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.527397] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.533999] sdhci: Copyright(c) Pierre Ossman <6>[ 1.547437] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.567147] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.574118] usbcore: registered new interface driver usbhid <6>[ 1.580136] usbhid: USB HID core driver <6>[ 1.597013] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.619373] NET: Registered PF_INET6 protocol family <6>[ 1.637644] Segment Routing with IPv6 <6>[ 1.641753] In-situ OAM (IOAM) with IPv6 <6>[ 1.646155] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.667430] NET: Registered PF_PACKET protocol family <5>[ 1.673486] Loading compiled-in X.509 certificates <6>[ 1.678780] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <6>[ 1.743333] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.757055] printk: console [ttyAMA0] enabled <6>[ 1.757055] printk: console [ttyAMA0] enabled <6>[ 1.766417] printk: bootconsole [pl11] disabled <6>[ 1.766417] printk: bootconsole [pl11] disabled <6>[ 1.788048] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.814371] ------------[ cut here ]------------ <4>[ 1.819358] WARNING: CPU: 0 PID: 13 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xb0/0x374 <4>[ 1.828625] Modules linked in: <4>[ 1.831949] CPU: 0 PID: 13 Comm: kworker/u2:1 Tainted: G W 6.1.38-cip1 #1 <4>[ 1.840381] Hardware name: BCM2835 <4>[ 1.844043] Workqueue: events_unbound deferred_probe_work_func <4>[ 1.850161] unwind_backtrace from show_stack+0x18/0x1c <4>[ 1.855665] show_stack from dump_stack_lvl+0x24/0x2c <4>[ 1.860991] dump_stack_lvl from __warn+0x88/0xec <4>[ 1.865973] __warn from warn_slowpath_fmt+0x7c/0xb0 <4>[ 1.871214] warn_slowpath_fmt from dt_cpufreq_probe+0xb0/0x374 <4>[ 1.877407] dt_cpufreq_probe from platform_probe+0x60/0xb0 <4>[ 1.883256] platform_probe from really_probe+0x1a4/0x3b0 <4>[ 1.888927] really_probe from __driver_probe_device+0x1a8/0x1d8 <4>[ 1.895201] __driver_probe_device from driver_probe_device+0x34/0xb4 <4>[ 1.901907] driver_probe_device from __device_attach_driver+0xbc/0x108 <4>[ 1.908788] __device_attach_driver from bus_for_each_drv+0xa4/0xb8 <4>[ 1.915320] bus_for_each_drv from __device_attach+0xe4/0x174 <4>[ 1.921332] __device_attach from bus_probe_device+0x30/0x88 <4>[ 1.927257] bus_probe_device from device_add+0x54c/0x6c4 <4>[ 1.932931] device_add from platform_device_add+0x1b0/0x1ec <4>[ 1.938865] platform_device_add from platform_device_register_full+0xe8/0x120 <4>[ 1.946359] platform_device_register_full from raspberrypi_cpufreq_probe+0xf8/0x180 <4>[ 1.954376] raspberrypi_cpufreq_probe from platform_probe+0x60/0xb0 <4>[ 1.961001] platform_probe from really_probe+0x1a4/0x3b0 <4>[ 1.966669] really_probe from __driver_probe_device+0x1a8/0x1d8 <4>[ 1.972942] __driver_probe_device from driver_probe_device+0x34/0xb4 <4>[ 1.979649] driver_probe_device from __device_attach_driver+0xbc/0x108 <4>[ 1.986530] __device_attach_driver from bus_for_each_drv+0xa4/0xb8 <4>[ 1.993061] bus_for_each_drv from __device_attach+0xe4/0x174 <4>[ 1.999072] __device_attach from bus_probe_device+0x30/0x88 <4>[ 2.004996] bus_probe_device from device_add+0x54c/0x6c4 <4>[ 2.010666] device_add from platform_device_add+0x1b0/0x1ec <4>[ 2.016599] platform_device_add from platform_device_register_full+0xe8/0x120 <4>[ 2.024092] platform_device_register_full from raspberrypi_clk_probe+0x15c/0x39c <4>[ 2.031854] raspberrypi_clk_probe from platform_probe+0x60/0xb0 <4>[ 2.038133] platform_probe from really_probe+0x1a4/0x3b0 <4>[ 2.043801] really_probe from __driver_probe_device+0x1a8/0x1d8 <4>[ 2.050075] __driver_probe_device from driver_probe_device+0x34/0xb4 <4>[ 2.056781] driver_probe_device from __device_attach_driver+0xbc/0x108 <4>[ 2.063662] __device_attach_driver from bus_for_each_drv+0xa4/0xb8 <4>[ 2.070193] bus_for_each_drv from __device_attach+0xe4/0x174 <4>[ 2.076204] __device_attach from bus_probe_device+0x30/0x88 <4>[ 2.082129] bus_probe_device from device_add+0x54c/0x6c4 <4>[ 2.087799] device_add from platform_device_add+0x1b0/0x1ec <4>[ 2.093733] platform_device_add from platform_device_register_full+0xe8/0x120 <4>[ 2.101226] platform_device_register_full from rpi_firmware_probe+0x190/0x1d4 <4>[ 2.108725] rpi_firmware_probe from platform_probe+0x60/0xb0 <4>[ 2.114742] platform_probe from really_probe+0x1a4/0x3b0 <4>[ 2.120411] really_probe from __driver_probe_device+0x1a8/0x1d8 <4>[ 2.126684] __driver_probe_device from driver_probe_device+0x34/0xb4 <4>[ 2.133390] driver_probe_device from __device_attach_driver+0xbc/0x108 <4>[ 2.140271] __device_attach_driver from bus_for_each_drv+0xa4/0xb8 <4>[ 2.146802] bus_for_each_drv from __device_attach+0xe4/0x174 <4>[ 2.152813] __device_attach from bus_probe_device+0x30/0x88 <4>[ 2.158738] bus_probe_device from deferred_probe_work_func+0xa4/0xc8 <4>[ 2.165443] deferred_probe_work_func from process_one_work+0x174/0x22c <4>[ 2.172326] process_one_work from worker_thread+0x238/0x2c0 <4>[ 2.178248] worker_thread from kthread+0xb4/0xc0 <4>[ 2.183228] kthread from ret_from_fork+0x14/0x2c <4>[ 2.188203] Exception stack(0xf0845fb0 to 0xf0845ff8) <4>[ 2.193513] 5fa0: 00000000 00000000 00000000 00000000 <4>[ 2.201943] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.210370] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.217294] ---[ end trace 0000000000000000 ]--- <4>[ 2.231184] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 2.248717] mmc0: new high speed SDHC card at address 0002 <6>[ 2.267770] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 2.278394] mmcblk0: p1 <6>[ 2.567873] Freeing initrd memory: 9092K <4>[ 2.575191] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.582917] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.643088] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.648124] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.655508] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.662368] hub 1-0:1.0: USB hub found <6>[ 2.666482] hub 1-0:1.0: 1 port detected <4>[ 2.673536] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <6>[ 3.016204] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.267240] hub 1-1:1.0: USB hub found <6>[ 3.271371] hub 1-1:1.0: 5 ports detected <6>[ 3.596206] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 3.729488] smsc95xx v2.0.0 <6>[ 3.859157] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=94) <6>[ 3.870392] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 3.976216] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.112397] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.120085] scsi host0: usb-storage 1-1.3:1.0 <6>[ 4.780467] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 4.791400] smsc95xx 1-1.1:1.0 eth0: Link is Down <5>[ 5.225724] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <6>[ 5.399217] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 5.407135] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 5.446211] Sending DHCP requests . <5>[ 5.596227] random: crng init done <5>[ 6.166046] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.174269] sd 0:0:0:0: [sda] Write Protect is off <4>[ 6.179769] sd 0:0:0:0: [sda] No Caching mode page found <4>[ 6.185362] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 6.225176] sda: sda1 sda2 <5>[ 6.229122] sd 0:0:0:0: [sda] Attached SCSI removable disk <4>[ 8.206204] ., OK <6>[ 8.248413] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.14 <6>[ 8.256729] IP-Config: Complete: <6>[ 8.260230] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.201.14, mask=255.255.255.0, gw=192.168.201.1 <6>[ 8.270956] host=bcm2836-rpi-2-b-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 8.278634] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 8.278648] nameserver0=192.168.201.1 <5>[ 8.290838] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 8.321684] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 8.328991] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 8.338546] ALSA device list: <6>[ 8.341803] No soundcards found. <6>[ 8.345803] uart-pl011 3f201000.serial: no DMA platform data <6>[ 8.351849] cfg80211: failed to load regulatory.db <6>[ 8.363582] Freeing unused kernel image (initmem) memory: 1024K <6>[ 8.370121] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 8.599961] udevd[98]: starting version 3.2.9 <27>[ 8.618891] udevd[98]: specified user 'tss' unknown <27>[ 8.624421] udevd[98]: specified group 'tss' unknown <30>[ 8.635733] udevd[99]: starting eudev-3.2.9 <4>[ 9.002392] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <3>[ 9.130116] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 9.136931] vchiq: could not initialize vchiq platform <6>[ 10.106295] bcm2835-rng 3f104000.rng: hwrng registered done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-11118386/environment . /lava-11118386/environment / # /lava-11118386/bin/lava-test-runner /lava-11118386/0 /lava-11118386/bin/lava-test-runner /lava-11118386/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-11118386/0/tests/0_dmesg + cat uuid + UUID=11118386_1.5.<8>[ 10.912109] 2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 10.978775] <8>[ 11.040145] <8>[ 11.101510] + set +x <8>[ 11.112523] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-11118386/environment / # . /lava-11118386/environment/lava-11118386/bin/lava-test-runner /lava-11118386/1 / # /lava-11118386/bin/lava-test-runner /lava-11118386/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-11118386/1/tests/1_bootrr + cat uuid + UUID=11118386_1.5.<8>[ 11.639788] 2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-11118386/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 3f902000.hdmi 3f806000.vec 3fc00000.v3d /lava-11118386/1/../bin/lava-test-case <8>[ 12.725512] /lava-11118386/1/../bin/lava-test-case <8>[ 12.781703] /lava-11118386/1/../bin/lava-test-case <8>[ 12.815988] + set +x <8>[ 12.841628] / #