[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.14 (259 ms) U-Boot> setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 U-Boot> tftp 0x01000000 11588172/tftp-deploy-118konir/kernel/zImage tftp 0x01000000 11588172/tftp-deploy-118konir/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11588172/tftp-deploy-118konir/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################## 544.9 KiB/s done Bytes transferred = 6331664 (609d10 hex) U-Boot> tftp 0x02200000 11588172/tftp-deploy-118konir/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 11588172/tftp-deploy-118konir/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11588172/tftp-deploy-118konir/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################## 973.6 KiB/s done Bytes transferred = 9311401 (8e14a9 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 11588172/tftp-deploy-118konir/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 11588172/tftp-deploy-118konir/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11588172/tftp-deploy-118konir/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 877 KiB/s done Bytes transferred = 14374 (3826 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x609d10 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9311337 Bytes = 8.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006925 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.54-cip6-rt3 (KernelCI@build-j53821-arm-gcc-10-bcm2835-defconfig-9tf2k) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Thu Sep 21 14:06:53 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:130 arm_dt_init_cpu_maps+0xec/0x15c [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.1.54-cip6-rt3 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] unwind_backtrace from show_stack+0x18/0x1c [ 0.000000] show_stack from dump_stack_lvl+0x24/0x2c [ 0.000000] dump_stack_lvl from __warn+0x8c/0xf4 [ 0.000000] __warn from warn_slowpath_fmt+0x7c/0xb0 [ 0.000000] warn_slowpath_fmt from arm_dt_init_cpu_maps+0xec/0x15c [ 0.000000] arm_dt_init_cpu_maps from setup_arch+0x25c/0x618 [ 0.000000] setup_arch from start_kernel+0x5c/0x680 [ 0.000000] start_kernel from 0x0 [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689176K/786432K available (8192K kernel code, 1686K rwdata, 3516K rodata, 1024K init, 451K bss, 31720K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 35513 entries in 105 pages <6>[ 0.000000] ftrace: allocated 105 pages with 4 groups <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000005] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008814] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018633] bcm2835: system timer (irq = 27) <6>[ 0.023676] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030174] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041449] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049880] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056706] Console: colour dummy device 80x30 <6>[ 0.061575] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072420] CPU: Testing write buffer coherency: ok <6>[ 0.077726] pid_max: default: 32768 minimum: 301 <6>[ 0.083063] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.090805] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.101020] cblist_init_generic: Setting adjustable number of callback queues. <6>[ 0.108675] cblist_init_generic: Setting shift to 0 and lim to 1. <6>[ 0.115389] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.123652] printk: bootconsole [pl11] printing thread started <6>[ 0.130143] devtmpfs: initialized <6>[ 0.136081] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.136307] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.136336] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.139814] pinctrl core: initialized pinctrl subsystem <6>[ 0.142055] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.143765] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.158871] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.159134] No ATAGs? <6>[ 0.159160] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.159172] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.159478] Serial: AMBA PL011 UART driver <6>[ 0.163377] platform 3f200000.gpio: Fixed dependency cycle(s) with /soc/gpio@7e200000/i2s_alt0 <6>[ 0.163408] platform 3f200000.gpio: Fixed dependency cycle(s) with /soc/gpio@7e200000/alt0 <6>[ 0.163430] platform 3f200000.gpio: Fixed dependency cycle(s) with /soc/gpio@7e200000/gpioout <6>[ 0.200943] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <5>[ 0.470801] SCSI subsystem initialized <6>[ 0.471125] usbcore: registered new interface driver usbfs <6>[ 0.471189] usbcore: registered new interface driver hub <6>[ 0.471243] usbcore: registered new device driver usb <4>[ 0.471494] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.471700] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.472053] mc: Linux media interface: v0.10 <6>[ 0.472141] videodev: Linux video capture interface: v2.00 <6>[ 0.472234] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.472241] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.472273] PTP clock support registered <6>[ 0.472514] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.473242] Bluetooth: Core ver 2.22 <6>[ 0.473296] NET: Registered PF_BLUETOOTH protocol family <6>[ 0.473304] Bluetooth: HCI device and connection manager initialized <6>[ 0.473322] Bluetooth: HCI socket layer initialized <6>[ 0.473334] Bluetooth: L2CAP socket layer initialized <6>[ 0.473355] Bluetooth: SCO socket layer initialized <6>[ 0.480557] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.506397] NET: Registered PF_INET protocol family <6>[ 0.506932] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 1.069375] printk: console [ttyAMA0] enabled <6>[ 1.069389] printk: bootconsole [pl11] disabled <6>[ 1.069444] printk: console [ttyAMA0] printing thread started <6>[ 1.074353] printk: bootconsole [pl11] printing thread stopped <6>[ 1.075902] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.083972] ------------[ cut here ]------------ <4>[ 1.083990] WARNING: CPU: 0 PID: 30 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xb0/0x374 <4>[ 1.118943] Modules linked in: <4>[ 1.122280] CPU: 0 PID: 30 Comm: kworker/u2:4 Tainted: G W 6.1.54-cip6-rt3 #1 <4>[ 1.131060] Hardware name: BCM2835 <4>[ 1.134722] Workqueue: events_unbound deferred_probe_work_func <4>[ 1.140843] unwind_backtrace from show_stack+0x18/0x1c <4>[ 1.146349] show_stack from dump_stack_lvl+0x24/0x2c <4>[ 1.151680] dump_stack_lvl from __warn+0x8c/0xf4 <4>[ 1.156664] __warn from warn_slowpath_fmt+0x7c/0xb0 <4>[ 1.161909] warn_slowpath_fmt from dt_cpufreq_probe+0xb0/0x374 <4>[ 1.168101] dt_cpufreq_probe from platform_probe+0x60/0xb0 <4>[ 1.173947] platform_probe from really_probe+0x1a4/0x3b0 <4>[ 1.179619] really_probe from __driver_probe_device+0x1a8/0x1d8 <4>[ 1.185895] __driver_probe_device from driver_probe_device+0x34/0xb4 <4>[ 1.192604] driver_probe_device from __device_attach_driver+0xbc/0x108 <4>[ 1.199488] __device_attach_driver from bus_for_each_drv+0xa4/0xb8 <4>[ 1.206023] bus_for_each_drv from __device_attach+0xe4/0x174 <4>[ 1.212037] __device_attach from bus_probe_device+0x30/0x88 <4>[ 1.217964] bus_probe_device from device_add+0x54c/0x6c4 <4>[ 1.223629] device_add from platform_device_add+0x1b0/0x1ec <4>[ 1.229558] platform_device_add from platform_device_register_full+0xe8/0x120 <4>[ 1.237056] platform_device_register_full from raspberrypi_cpufreq_probe+0xf8/0x180 <4>[ 1.245068] raspberrypi_cpufreq_probe from platform_probe+0x60/0xb0 <4>[ 1.251690] platform_probe from really_probe+0x1a4/0x3b0 <4>[ 1.257361] really_probe from __driver_probe_device+0x1a8/0x1d8 <4>[ 1.263637] __driver_probe_device from driver_probe_device+0x34/0xb4 <4>[ 1.270346] driver_probe_device from __device_attach_driver+0xbc/0x108 <4>[ 1.277229] __device_attach_driver from bus_for_each_drv+0xa4/0xb8 <4>[ 1.283763] bus_for_each_drv from __device_attach+0xe4/0x174 <4>[ 1.289777] __device_attach from bus_probe_device+0x30/0x88 <4>[ 1.295704] bus_probe_device from device_add+0x54c/0x6c4 <4>[ 1.301368] device_add from platform_device_add+0x1b0/0x1ec <4>[ 1.307296] platform_device_add from platform_device_register_full+0xe8/0x120 <4>[ 1.314792] platform_device_register_full from raspberrypi_clk_probe+0x15c/0x39c <4>[ 1.322555] raspberrypi_clk_probe from platform_probe+0x60/0xb0 <4>[ 1.328835] platform_probe from really_probe+0x1a4/0x3b0 <4>[ 1.334506] really_probe from __driver_probe_device+0x1a8/0x1d8 <4>[ 1.340781] __driver_probe_device from driver_probe_device+0x34/0xb4 <4>[ 1.347491] driver_probe_device from __device_attach_driver+0xbc/0x108 <4>[ 1.354374] __device_attach_driver from bus_for_each_drv+0xa4/0xb8 <4>[ 1.360908] bus_for_each_drv from __device_attach+0xe4/0x174 <4>[ 1.366921] __device_attach from bus_probe_device+0x30/0x88 <4>[ 1.372849] bus_probe_device from device_add+0x54c/0x6c4 <4>[ 1.378513] device_add from platform_device_add+0x1b0/0x1ec <4>[ 1.384440] platform_device_add from platform_device_register_full+0xe8/0x120 <4>[ 1.391936] platform_device_register_full from rpi_firmware_probe+0x190/0x1d4 <4>[ 1.399440] rpi_firmware_probe from platform_probe+0x60/0xb0 <4>[ 1.405461] platform_probe from really_probe+0x1a4/0x3b0 <4>[ 1.411132] really_probe from __driver_probe_device+0x1a8/0x1d8 <4>[ 1.417407] __driver_probe_device from driver_probe_device+0x34/0xb4 <4>[ 1.424116] driver_probe_device from __device_attach_driver+0xbc/0x108 <4>[ 1.430999] __device_attach_driver from bus_for_each_drv+0xa4/0xb8 <4>[ 1.437533] bus_for_each_drv from __device_attach+0xe4/0x174 <4>[ 1.443547] __device_attach from bus_probe_device+0x30/0x88 <4>[ 1.449475] bus_probe_device from deferred_probe_work_func+0xa4/0xc8 <4>[ 1.456182] deferred_probe_work_func from process_one_work+0x174/0x228 <4>[ 1.463066] process_one_work from worker_thread+0x238/0x2c4 <4>[ 1.468990] worker_thread from kthread+0xb4/0xc0 <4>[ 1.473970] kthread from ret_from_fork+0x14/0x28 <4>[ 1.478946] Exception stack(0xf089dfb0 to 0xf089dff8) <4>[ 1.484257] dfa0: 00000000 00000000 00000000 00000000 <4>[ 1.492687] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 1.501116] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 1.508035] ---[ end trace 0000000000000000 ]--- <6>[ 1.525625] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 1.658572] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 1.669394] mmc0: new high speed SDHC card at address 0002 <6>[ 1.682391] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 1.697091] mmcblk0: p1 <4>[ 2.073943] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.074224] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.127159] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.127233] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.127312] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.128609] hub 1-0:1.0: USB hub found <6>[ 2.128675] hub 1-0:1.0: 1 port detected <4>[ 2.144652] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <6>[ 2.292959] Freeing initrd memory: 9096K <6>[ 2.470593] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 2.721835] hub 1-1:1.0: USB hub found <6>[ 2.721948] hub 1-1:1.0: 5 ports detected <6>[ 3.040608] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 3.173877] smsc95xx v2.0.0 <6>[ 3.303532] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=94) <6>[ 3.305040] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 3.336327] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 3.340024] smsc95xx 1-1.1:1.0 eth0: Link is Down <6>[ 3.400584] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 3.536650] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 3.537990] scsi host0: usb-storage 1-1.3:1.0 <5>[ 4.630350] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <6>[ 4.843599] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 4.843679] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 4.900578] Sending DHCP requests . <5>[ 5.050596] random: crng init done <5>[ 5.570593] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 5.571020] sd 0:0:0:0: [sda] Write Protect is off <4>[ 5.571520] sd 0:0:0:0: [sda] No Caching mode page found <4>[ 5.571534] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 5.616179] sda: sda1 sda2 <5>[ 5.617001] sd 0:0:0:0: [sda] Attached SCSI removable disk <4>[ 7.800576] ., OK <6>[ 7.840581] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.14 <6>[ 7.840602] IP-Config: Complete: <6>[ 7.840607] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.201.14, mask=255.255.255.0, gw=192.168.201.1 <6>[ 7.840624] host=bcm2836-rpi-2-b-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 7.840631] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 7.840641] nameserver0=192.168.201.1 <5>[ 7.840962] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 7.896287] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 7.896519] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 7.896544] cfg80211: failed to load regulatory.db <6>[ 7.897428] ALSA device list: <6>[ 7.897451] No soundcards found. <6>[ 7.897773] uart-pl011 3f201000.serial: no DMA platform data <6>[ 7.916485] Freeing unused kernel image (initmem) memory: 1024K <6>[ 7.916779] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 8.197783] udevd[103]: starting version 3.2.9 <27>[ 8.217029] udevd[103]: specified user 'tss' unknown <27>[ 8.217259] udevd[103]: specified group 'tss' unknown <30>[ 8.234390] udevd[104]: starting eudev-3.2.9 <4>[ 8.625177] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <3>[ 8.705134] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 8.705164] vchiq: could not initialize vchiq platform done <6>[ 9.750644] bcm2835-rng 3f104000.rng: hwrng registered Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-11588172/environment . /lava-11588172/environment / # /lava-11588172/bin/lava-test-runner /lava-11588172/0 /lava-11588172/bin/lava-test-runner /lava-11588172/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-11588172/0/tests/0_dmesg + cat uuid + UUID=11588172_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci<8>[ 10.566159] /dmesg.sh <8>[ 10.633263] <8>[ 10.694145] + set +x <8>[ 10.755291] <8>[ 10.757459] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-11588172/environment / # . /lava-11588172/environment/lava-11588172/bin/lava-test-runner /lava-11588172/1 / # /lava-11588172/bin/lava-test-runner /lava-11588172/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-11588172/1/tests/1_bootrr + cat uuid + UUID=11588172_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-11588172/1<8>[ 11.293827] /../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 3f902000.hdmi 3f806000.vec 3fc00000.v3d /lava-11588172/1/../bin/lava-test-case <8>[ 12.378751] /lava-11588172/1/../bin/lava-test-case <8>[ 12.435250] /lava-11588172/1/../bin/lava-test-case <8>[ 12.469513] + set +x / # <8>[ 12.495303]