Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2002 device serialdev,/dev/ttyUSB-lf-bbb-02,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.135 (82 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 1028138/tftp-deploy-nrd0bhzw/kernel/zImage tftp 0x82000000 1028138/tftp-deploy-nrd0bhzw/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.135 Filename '1028138/tftp-deploy-nrd0bhzw/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 4.8 MiB 3.5 MiB/s done Bytes transferred = 5000792 (4c4e58 hex) => tftp 0x83000000 1028138/tftp-deploy-nrd0bhzw/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1028138/tftp-deploy-nrd0bhzw/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.135 Filename '1028138/tftp-deploy-nrd0bhzw/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 14.7 MiB 3.5 MiB/s done Bytes transferred = 15366617 (ea79d9 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1028138/tftp-deploy-nrd0bhzw/dtb/am335x-boneblack.dtb tftp 0x88000000 1028138/tftp-deploy-nrd0bhzw/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.135 Filename '1028138/tftp-deploy-nrd0bhzw/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 68.3 KiB 3.7 MiB/s done Bytes transferred = 69937 (11131 hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x4c4e58 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-10-27 12:12:21 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 15366553 Bytes = 14.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 88014130 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.59-cip7 (KernelCI@build-j82867-arm-gcc-10-omap2plus-defconfig-qcfz4) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Fri Oct 27 11:48:29 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 16 pages/cpu s34196 r8192 d23148 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 469784K/522240K available (10240K kernel code, 1087K rwdata, 2476K rodata, 1024K init, 248K bss, 36072K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008342] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018584] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030375] Console: colour dummy device 80x30 <3>[ 0.035263] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042343] This ensures that you still see kernel messages. Please <3>[ 0.049075] update your kernel commandline. <6>[ 0.053684] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095597] CPU: Testing write buffer coherency: ok <6>[ 0.100987] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106456] pid_max: default: 32768 minimum: 301 <6>[ 0.111610] LSM: Security Framework initializing <6>[ 0.116818] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124658] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134512] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.141363] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.148615] rcu: Hierarchical SRCU implementation. <6>[ 0.153877] rcu: Max phase no-delay instances is 1000. <6>[ 0.160229] smp: Bringing up secondary CPUs ... <6>[ 0.165170] smp: Brought up 1 node, 1 CPU <6>[ 0.169617] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.176338] CPU: All CPU(s) started in SVC mode. <6>[ 0.182212] devtmpfs: initialized <6>[ 0.200199] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.208676] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.219178] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.227790] pinctrl core: initialized pinctrl subsystem <6>[ 0.235561] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.244833] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.252844] audit: initializing netlink subsys (disabled) <6>[ 0.259956] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.259979] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.266523] thermal_sys: Registered thermal governor 'user_space' <5>[ 0.273144] audit: type=2000 audit(0.220:1): state=initialized audit_enabled=0 res=1 <6>[ 0.288015] cpuidle: using governor menu <6>[ 0.307279] No ATAGs? <6>[ 0.310033] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 0.324927] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.972138] iommu: Default domain type: Translated <6>[ 0.977441] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.985628] SCSI subsystem initialized <6>[ 0.990688] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.996073] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.005834] PTP clock support registered <6>[ 1.011622] vgaarb: loaded <6>[ 1.014991] clocksource: Switched to clocksource dmtimer <5>[ 1.021435] VFS: Disk quotas dquot_6.6.0 <6>[ 1.025906] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 1.095175] NET: Registered PF_INET protocol family <6>[ 1.100803] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 1.109863] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 1.118823] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 1.127107] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 1.135408] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) <6>[ 1.143111] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 1.150063] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 1.157099] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 1.164723] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 1.172035] RPC: Registered named UNIX socket transport module. <6>[ 1.178508] RPC: Registered udp transport module. <6>[ 1.183619] RPC: Registered tcp transport module. <6>[ 1.188746] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.195671] PCI: CLS 0 bytes, default 64 <5>[ 1.201410] Initialise system trusted keyrings <6>[ 1.206809] Trying to unpack rootfs image as initramfs... <6>[ 1.245731] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 1.267322] NFS: Registering the id_resolver key type <5>[ 1.272871] Key type id_resolver registered <5>[ 1.277575] Key type id_legacy registered <6>[ 1.282032] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 1.316543] Key type asymmetric registered <5>[ 1.321076] Asymmetric key parser 'x509' registered <6>[ 1.326624] io scheduler mq-deadline registered <6>[ 1.331562] io scheduler kyber registered <6>[ 1.360246] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <6>[ 1.409328] brd: module loaded <6>[ 1.432035] loop: module loaded <3>[ 1.436652] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 1.446143] i2c_dev: i2c /dev entries driver <5>[ 1.451618] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 1.459305] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.465998] sdhci: Copyright(c) Pierre Ossman <6>[ 1.470928] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.525261] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.532707] Initializing XFRM netlink socket <6>[ 1.537711] NET: Registered PF_INET6 protocol family <6>[ 1.566537] Segment Routing with IPv6 <6>[ 1.570668] In-situ OAM (IOAM) with IPv6 <6>[ 1.575170] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.582424] NET: Registered PF_PACKET protocol family <6>[ 1.588005] NET: Registered PF_KEY protocol family <5>[ 1.593304] Key type dns_resolver registered <6>[ 1.598098] ThumbEE CPU extension supported. <5>[ 1.602774] Registering SWP/SWPB emulation handler <3>[ 1.608443] omap_voltage_late_init: Voltage driver support not added <6>[ 1.615666] SmartReflex Class3 initialized <5>[ 1.675795] Loading compiled-in X.509 certificates <6>[ 1.755432] platform 44e10800.pinmux: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@10000/scm@0/pinmux@800/pinmux_clkout2_pin <6>[ 1.771605] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <4>[ 1.782103] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 1.856578] ti-sysc: probe of 48040000.target-module failed with error -16 <4>[ 1.873594] gpio gpiochip0: (gpio-0-31): not an immutable chip, please consider fixing it! <6>[ 1.925696] OMAP GPIO hardware version 0.1 <6>[ 1.956948] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <4>[ 1.968143] gpio gpiochip1: (gpio-32-63): not an immutable chip, please consider fixing it! <4>[ 1.998051] gpio gpiochip2: (gpio-64-95): not an immutable chip, please consider fixing it! <4>[ 2.043520] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 2.053552] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 2.095408] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 2.761148] Freeing initrd memory: 15008K <6>[ 2.803421] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 2.813559] cpsw-switch 4a100000.switch: initialized cpsw ale version 1.4 <6>[ 2.820886] cpsw-switch 4a100000.switch: ALE Table size 1024 <6>[ 2.827183] cpsw-switch 4a100000.switch: cpts: overflow check period 500 (jiffies) <6>[ 2.835321] cpsw-switch 4a100000.switch: CPTS: ref_clk_freq:250000000 calc_mult:2147483648 calc_shift:29 error:0 nsec/sec <6>[ 2.846992] cpsw-switch 4a100000.switch: Detected MACID = 04:79:b7:e7:06:e0 <5>[ 2.856102] cpsw-switch 4a100000.switch: initialized (regs 0x4a100000, pool size 256) hw_ver:0019010C 1.12 (0) <3>[ 2.876196] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 2.884661] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 2.908282] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <4>[ 2.919043] gpio gpiochip3: (gpio-96-127): not an immutable chip, please consider fixing it! <3>[ 2.933356] l3-aon-clkctrl:0000:0: failed to disable <6>[ 2.941210] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 34, base_baud = 3000000) is a 8250 <6>[ 2.950667] printk: console [ttyS0] enabled <6>[ 2.950667] printk: console [ttyS0] enabled <6>[ 2.959763] printk: bootconsole [omap8250] disabled <6>[ 2.959763] printk: bootconsole [omap8250] disabled <4>[ 2.995897] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 3.009850] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 3.018789] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 3.025149] i2c 0-0070: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0/port/endpoint@0 <6>[ 3.038125] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 3.045953] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 3.055047] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 3.060254] sdhci-omap 48060000.mmc: supply pbias not found, using dummy regulator <4>[ 3.072167] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <4>[ 3.080918] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 3.089377] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.125029] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <6>[ 3.134100] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 3.143058] cpsw-switch 4a100000.switch: starting ndev. mode: dual_mac <6>[ 3.194110] mmc1: new high speed MMC card at address 0001 <6>[ 3.201199] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 3.209069] mmcblk1: p1 <6>[ 3.213038] mmcblk1boot0: mmc1:0001 M62704 2.00 MiB <6>[ 3.220667] mmcblk1boot1: mmc1:0001 M62704 2.00 MiB <6>[ 3.228082] mmcblk1rpmb: mmc1:0001 M62704 512 KiB, chardev (250:0) <6>[ 3.235526] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 5.325737] cpsw-switch 4a100000.switch eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 5.334379] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 5.375036] Sending DHCP requests ., OK <6>[ 6.799223] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.135 <6>[ 6.807156] IP-Config: Complete: <6>[ 6.810660] device=eth0, hwaddr=04:79:b7:e7:06:e0, ipaddr=172.16.3.135, mask=255.255.255.0, gw=172.16.3.3 <6>[ 6.821006] host=172.16.3.135, domain=denx.de, nis-domain=(none) <6>[ 6.827760] bootserver=172.16.3.33, rootserver=172.16.3.33, rootpath= <6>[ 6.827771] nameserver0=172.16.3.3 <6>[ 6.839068] ntpserver0=172.16.3.3 <6>[ 6.845805] Freeing unused kernel image (initmem) memory: 1024K <6>[ 6.865532] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.130843] udevd[105]: starting version 3.2.9 <5>[ 9.524996] random: crng init done <27>[ 9.540136] udevd[105]: specified user 'tss' unknown <27>[ 9.546004] udevd[105]: specified group 'tss' unknown <30>[ 9.567327] udevd[106]: starting eudev-3.2.9 <4>[ 10.824283] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 10.833549] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 10.915568] usbcore: registered new interface driver usbfs <6>[ 10.921451] usbcore: registered new interface driver hub <6>[ 10.927304] usbcore: registered new device driver usb <4>[ 11.056952] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 11.066143] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 11.190886] remoteproc remoteproc0: wkup_m3 is available <6>[ 11.290474] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 11.296323] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 11.435314] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 <6>[ 11.443929] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.451566] usb usb1: Product: MUSB HDRC host driver <6>[ 11.456879] usb usb1: Manufacturer: Linux 6.1.59-cip7 musb-hcd <6>[ 11.463005] usb usb1: SerialNumber: musb-hdrc.1 <6>[ 11.645870] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 11.651319] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) <6>[ 11.670529] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <4>[ 11.704354] at24 2-0054: supply vcc not found, using dummy regulator <4>[ 11.839675] at24 2-0055: supply vcc not found, using dummy regulator <6>[ 11.866377] hub 1-0:1.0: USB hub found <6>[ 11.950657] hub 1-0:1.0: 1 port detected <4>[ 12.013203] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 12.024914] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <6>[ 12.128286] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <4>[ 12.148661] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 12.198130] tda998x 0-0070: found TDA19988 <6>[ 12.246128] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 12.837822] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <6>[ 12.855605] remoteproc remoteproc0: powering up wkup_m3 <4>[ 12.861291] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 12.871232] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 12.877485] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <6>[ 13.483056] omap_rng 48310000.rng: Random Number Generator ver. 20 <6>[ 13.593598] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_audio_codec_init [tda998x]) <6>[ 13.675704] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 <6>[ 13.813592] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 13.821879] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <3>[ 13.997294] PM: Cannot get wkup_m3_ipc handle <6>[ 14.104598] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <6>[ 14.161842] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <6>[ 14.253834] omap-sham 53100000.sham: will run requests pump with realtime priority <6>[ 14.279451] omap-aes 53500000.aes: will run requests pump with realtime priority <3>[ 14.364827] PM: Cannot get wkup_m3_ipc handle <3>[ 14.379881] PM: Cannot get wkup_m3_ipc handle <3>[ 15.032670] PM: Cannot get wkup_m3_ipc handle <3>[ 15.077682] PM: Cannot get wkup_m3_ipc handle done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1028138/environment . /lava-1028138/environment / # /lava-1028138/bin/lava-test-runner /lava-1028138/0 /lava-1028138/bin/lava-test-runner /lava-1028138/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1028138/0/tests/0_dmesg + cat uuid + UUID=1028138_1.5.2.4.1 + <8>[ 16.056450] set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 16.130498] <8>[ 16.197741] <8>[ 16.265876] + set +x <8>[ 16.277777] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1028138/environment / # . /lava-1028138/environment/lava-1028138/bin/lava-test-runner /lava-1028138/1 / # /lava-1028138/bin/lava-test-runner /lava-1028138/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1028138/1/tests/1_bootrr + cat uuid + UUID=1028138_1.5.2.4.5 <8>[ 16.818856] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1028138/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto pm33xx /lava-1028138/1/../bin/lava-test-case <8>[ 17.935692] /lava-1028138/1/../bin/lava-test-case <8>[ 17.996728] /lava-1028138/1/../bin/lava-test-case <8>[ 18.032292] /lava-1028138/1/../bin/lava-test-case <8>[ 18.100937] /lava-1028138/1/../bin/lava-test-case <8>[ 18.157887] /lava-1028138/1/../bin/lava-test-case <8>[ 18.203010] /lava-1028138/1/../bin/lava-test-case <8>[ 18.277837] /lava-1028138/1/../bin/lava-test-case <8>[ 18.332614] /lava-1028138/1/../bin/lava-test-case <8>[ 18.378246] /lava-1028138/1/../bin/lava-test-case <8>[ 18.432690] /lava-1028138/1/../bin/lava-test-case <8>[ 18.477747] /lava-1028138/1/../bin/lava-test-case <8>[ 18.532745] /lava-1028138/1/../bin/lava-test-case <8>[ 18.577723] /lava-1028138/1/../bin/lava-test-case <8>[ 18.621600] /lava-1028138/1/../bin/lava-test-case <8>[ 18.667108] /lava-1028138/1/../bin/lava-test-case <8>[ 18.721831] /lava-1028138/1/../bin/lava-test-case <8>[ 18.768222] /lava-1028138/1/../bin/lava-test-case <8>[ 18.824136] /lava-1028138/1/../bin/lava-test-case <8>[ 18.879702] /lava-1028138/1/../bin/lava-test-case <8>[ 18.924706] /lava-1028138/1/../bin/lava-test-case <8>[ 18.980818] /lava-1028138/1/../bin/lava-test-case <8>[ 19.036323] /lava-1028138/1/../bin/lava-test-case <8>[ 19.081937] /lava-1028138/1/../bin/lava-test-case <8>[ 19.138857] /lava-1028138/1/../bin/lava-test-case <8>[ 19.184149] /lava-1028138/1/../bin/lava-test-case <8>[ 19.239830] /lava-1028138/1/../bin/lava-test-case <8>[ 19.284491] /lava-1028138/1/../bin/lava-test-case <8>[ 19.340835] /lava-1028138/1/../bin/lava-test-case <8>[ 19.386378] /lava-1028138/1/../bin/lava-test-case <8>[ 19.442401] /lava-1028138/1/../bin/lava-test-case <8>[ 19.488341] /lava-1028138/1/../bin/lava-test-case <8>[ 19.543501] /lava-1028138/1/../bin/lava-test-case <8>[ 19.589190] /lava-1028138/1/../bin/lava-test-case <8>[ 19.644915] /lava-1028138/1/../bin/lava-test-case <8>[ 19.689975] /lava-1028138/1/../bin/lava-test-case <8>[ 19.746196] /lava-1028138/1/../bin/lava-test-case <8>[ 19.790525] /lava-1028138/1/../bin/lava-test-case <8>[ 19.847181] /lava-1028138/1/../bin/lava-test-case <8>[ 19.891951] /lava-1028138/1/../bin/lava-test-case <8>[ 19.948249] /lava-1028138/1/../bin/lava-test-case <8>[ 19.992813] /lava-1028138/1/../bin/lava-test-case <8>[ 20.049223] /lava-1028138/1/../bin/lava-test-case <8>[ 20.094492] /lava-1028138/1/../bin/lava-test-case <8>[ 20.150489] /lava-1028138/1/../bin/lava-test-case <8>[ 20.195683] /lava-1028138/1/../bin/lava-test-case <8>[ 20.250677] /lava-1028138/1/../bin/lava-test-case <8>[ 20.296725] /lava-1028138/1/../bin/lava-test-case <8>[ 20.351880] /lava-1028138/1/../bin/lava-test-case <8>[ 20.397704] /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found /lava-1028138/1/../bin/lava-test-case <8>[ 20.444892] /lava-1028138/1/../bin/lava-test-case <8>[ 20.500731] /lava-1028138/1/../bin/lava-test-case <8>[ 20.553628] + set +x <8>[ 20.571672] / #