connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1005605/tftp-deploy-0fud06kb/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1005605/tftp-deploy-0fud06kb/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1005605/tftp-deploy-0fud06kb/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1005605/tftp-deploy-0fud06kb/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1005605/tftp-deploy-0fud06kb/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1005605/tftp-deploy-0fud06kb/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 66:34:b0:fc:96:93 T eth0: DHCP client bound to address 10.8.254.171 Loading ARM Linux zImage '/mnt/tftp/1005605/tftp-deploy-0fud06kb/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x13945000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1005605/tftp-deploy-0fud06kb/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x189fcb56 Loading devicetree from '/mnt/tftp/1005605/tftp-deploy-0fud06kb/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x13945000, initrd at 0x18000000, oftree at 0x189fd000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.59-cip8-rt4 (KernelCI@build-j84194-arm-gcc-10-imx-v6-v7-defconfig-hvhrm) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Sat Oct 28 19:29:04 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 17 pages/cpu s38452 r8192 d22988 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1971284K/2097152K available (15360K kernel code, 2193K rwdata, 5552K rodata, 1024K init, 6675K bss, 60332K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000025] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002143] Console: colour dummy device 80x30 [ 0.002219] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002230] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002241] ... MAX_LOCK_DEPTH: 48 [ 0.002252] ... MAX_LOCKDEP_KEYS: 8192 [ 0.002262] ... CLASSHASH_SIZE: 4096 [ 0.002272] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002282] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002291] ... CHAINHASH_SIZE: 32768 [ 0.002302] memory used by lock dependency info: 4061 kB [ 0.002312] memory used for stack traces: 2112 kB [ 0.002323] per task-struct memory footprint: 1536 bytes [ 0.002432] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002462] CPU: Testing write buffer coherency: ok [ 0.002627] CPU0: Spectre v2: using BPIALL workaround [ 0.002645] pid_max: default: 32768 minimum: 301 [ 0.003262] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003297] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.008616] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.012054] cblist_init_generic: Setting adjustable number of callback queues. [ 0.012075] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.012432] Running RCU-tasks wait API self tests [ 0.012764] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.013398] Callback from call_rcu_tasks_trace() invoked. [ 0.013650] rcu: Hierarchical SRCU implementation. [ 0.013656] rcu: Max phase no-delay instances is 1000. [ 0.016478] smp: Bringing up secondary CPUs ... [ 0.019727] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.019744] CPU1: Spectre v2: using BPIALL workaround [ 0.023143] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.023158] CPU2: Spectre v2: using BPIALL workaround [ 0.025845] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.025861] CPU3: Spectre v2: using BPIALL workaround [ 0.026283] smp: Brought up 1 node, 4 CPUs [ 0.026296] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.026306] CPU: All CPU(s) started in SVC mode. [ 0.029132] devtmpfs: initialized [ 0.064482] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.066764] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.066826] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.071007] pinctrl core: initialized pinctrl subsystem [ 0.077336] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.100147] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.105079] thermal_sys: Registered thermal governor 'step_wise' [ 0.105409] cpuidle: using governor menu [ 0.105639] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.124220] platform soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 [ 0.164102] platform 20e0000.pinctrl: Fixed dependency cycle(s) with /soc/bus@2000000/pinctrl@20e0000/imx6qdl-wandboard/hoggrp [ 0.178725] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu2_csi1_mux/port@0/endpoint [ 0.178899] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux/port@0/endpoint [ 0.184268] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@1/endpoint [ 0.184390] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@0/endpoint [ 0.184558] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2100000/mipi@21dc000/port@2/endpoint [ 0.184718] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux/port@2/endpoint [ 0.188125] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@3/endpoint [ 0.188554] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@2/endpoint [ 0.188841] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu2_csi1_mux/port@2/endpoint [ 0.189146] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/bus@2100000/mipi@21dc000/port@3/endpoint [ 0.199926] No ATAGs? [ 0.200425] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.200439] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.205642] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.254587] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.318831] SCSI subsystem initialized [ 0.320626] usbcore: registered new interface driver usbfs [ 0.320856] usbcore: registered new interface driver hub [ 0.321012] usbcore: registered new device driver usb [ 0.321382] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 0.322200] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 0.322652] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 0.323288] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 0.327587] i2c i2c-0: IMX I2C adapter registered [ 0.332221] i2c 1-003c: Fixed dependency cycle(s) with /soc/bus@2100000/mipi@21dc000/port@0/endpoint [ 0.333664] i2c i2c-1: IMX I2C adapter registered [ 0.338814] i2c i2c-2: IMX I2C adapter registered [ 0.339394] mc: Linux media interface: v0.10 [ 0.339625] videodev: Linux video capture interface: v2.00 [ 0.340211] pps_core: LinuxPPS API ver. 1 registered [ 0.340219] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.340269] PTP clock support registered [ 0.342950] Advanced Linux Sound Architecture Driver Initialized. [ 0.348536] Bluetooth: Core ver 2.22 [ 0.348658] NET: Registered PF_BLUETOOTH protocol family [ 0.348665] Bluetooth: HCI device and connection manager initialized [ 0.348779] Bluetooth: HCI socket layer initialized [ 0.348802] Bluetooth: L2CAP socket layer initialized [ 0.348950] Bluetooth: SCO socket layer initialized [ 0.352032] vgaarb: loaded [ 1.394963] clocksource: Switched to clocksource mxc_timer1 [ 1.398108] VFS: Disk quotas dquot_6.6.0 [ 1.398268] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.431959] NET: Registered PF_INET protocol family [ 1.432970] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.436288] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear) [ 1.436391] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.436430] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.437175] TCP bind hash table entries: 8192 (order: 7, 655360 bytes, linear) [ 1.439382] TCP: Hash tables configured (established 8192 bind 8192) [ 1.440025] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 1.440230] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 1.440846] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.443156] RPC: Registered named UNIX socket transport module. [ 1.443173] RPC: Registered udp transport module. [ 1.443180] RPC: Registered tcp transport module. [ 1.443187] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.445143] PCI: CLS 0 bytes, default 64 [ 1.446847] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 1.447995] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.448091] Trying to unpack rootfs image as initramfs... [ 1.455540] Initialise system trusted keyrings [ 1.456461] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.480226] NFS: Registering the id_resolver key type [ 1.480377] Key type id_resolver registered [ 1.480388] Key type id_legacy registered [ 1.480688] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.480792] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.480979] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.482334] fuse: init (API version 7.37) [ 1.579740] Key type asymmetric registered [ 1.579912] Asymmetric key parser 'x509' registered [ 1.580578] bounce: pool size: 64 pages [ 1.581034] io scheduler mq-deadline registered [ 1.581051] io scheduler kyber registered [ 1.602783] mxs-dma 110000.dma-apbh: initialized [ 1.618501] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 1.619511] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 1.619526] pfuze100-regulator 2-0008: pfuze100 found. [ 1.656548] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 268, base_baud = 5000000) is a IMX [ 1.657652] printk: console [ttymxc0] printing thread started [ 1.658091] printk: console [ttymxc0] enabled [ 1.662377] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 269, base_baud = 5000000) is a IMX [ 1.678748] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 1.747698] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 1.749050] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 1.750104] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 1.750146] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 1.759835] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 1.760054] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 1.760073] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 1.763005] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 1.775869] imx-ipuv3 2400000.ipu: IPUv3H probed [ 1.781446] Stack Depot allocating hash table of 65536 entries with kvcalloc [ 1.787455] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 1.787923] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 1.788521] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 1.788989] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 1.790142] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 1.793815] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 1.796288] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 1.797944] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 1.798098] imx-ipuv3 2800000.ipu: IPUv3H probed [ 1.851122] brd: module loaded [ 1.881960] loop: module loaded [ 1.884720] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 1.884740] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 1.884752] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 1.884836] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 1.885108] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 1.885858] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 1.886288] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 1.890141] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 1.890177] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.890194] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 1.900527] scsi host0: ahci-imx [ 1.902318] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 282 [ 1.916396] CAN device driver interface [ 1.924871] pps pps0: new PPS source ptp0 [ 2.227383] ata1: SATA link down (SStatus 0 SControl 300) [ 2.227702] ahci-imx 2200000.sata: no device found, disabling link. [ 2.227714] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 2.757955] Freeing initrd memory: 10228K [ 2.806383] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.808906] usbcore: registered new interface driver r8152 [ 2.809028] usbcore: registered new interface driver lan78xx [ 2.809177] usbcore: registered new interface driver asix [ 2.809283] usbcore: registered new interface driver ax88179_178a [ 2.809394] usbcore: registered new interface driver cdc_ether [ 2.809560] usbcore: registered new interface driver smsc95xx [ 2.809670] usbcore: registered new interface driver net1080 [ 2.809773] usbcore: registered new interface driver cdc_subset [ 2.809879] usbcore: registered new interface driver zaurus [ 2.809988] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 2.810171] usbcore: registered new interface driver cdc_ncm [ 2.810296] usbcore: registered new interface driver r8153_ecm [ 2.810565] usbcore: registered new interface driver usb-storage [ 2.820091] SPI driver ads7846 has no spi_device_id for ti,tsc2046 [ 2.820102] SPI driver ads7846 has no spi_device_id for ti,ads7843 [ 2.820109] SPI driver ads7846 has no spi_device_id for ti,ads7845 [ 2.820116] SPI driver ads7846 has no spi_device_id for ti,ads7873 [ 2.832283] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 2.832477] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 2.833070] i2c_dev: i2c /dev entries driver [ 2.848800] Bluetooth: HCI UART driver ver 2.3 [ 2.848816] Bluetooth: HCI UART protocol H4 registered [ 2.848903] Bluetooth: HCI UART protocol LL registered [ 2.852318] sdhci: Secure Digital Host Controller Interface driver [ 2.852324] sdhci: Copyright(c) Pierre Ossman [ 2.852331] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.856766] caam 2100000.crypto: Entropy delay = 3200 [ 2.861909] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 2.866395] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 2.917564] caam 2100000.crypto: Instantiated RNG4 SH0 [ 2.978329] caam 2100000.crypto: Instantiated RNG4 SH1 [ 2.979019] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 2.979036] caam 2100000.crypto: job rings = 2, qi = 0 [ 2.999689] caam algorithms registered in /proc/crypto [ 3.000085] caam 2100000.crypto: registering rng-caam [ 3.019420] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 3.020266] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 3.021506] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 3.057759] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.060089] mmc0: new high speed SDHC card at address 1234 [ 3.064506] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.129418] mmc2: new DDR MMC card at address 0001 [ 3.131588] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.138819] mmcblk2: p1 p2 [ 3.142197] mmcblk2boot0: mmc2:0001 S10004 4.00 MiB [ 3.148920] mmcblk2boot1: mmc2:0001 S10004 4.00 MiB [ 3.155769] mmcblk2rpmb: mmc2:0001 S10004 4.00 MiB, chardev (243:0) [ 3.160993] random: crng init done [ 3.161561] caam 2100000.crypto: rng crypto API alg registered prng-caam [ 3.175676] usbcore: registered new interface driver usbhid [ 3.175685] usbhid: USB HID core driver [ 3.180494] imx-ipuv3-csi imx-ipuv3-csi.0: Registered ipu1_csi0 capture as /dev/video0 [ 3.182010] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpenc capture as /dev/video1 [ 3.182857] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpvf capture as /dev/video2 [ 3.184015] imx-ipuv3-csi imx-ipuv3-csi.1: Registered ipu1_csi1 capture as /dev/video3 [ 3.185032] imx-ipuv3-csi imx-ipuv3-csi.4: Registered ipu2_csi0 capture as /dev/video4 [ 3.185633] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpenc capture as /dev/video5 [ 3.186253] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpvf capture as /dev/video6 [ 3.187265] imx-ipuv3-csi imx-ipuv3-csi.5: Registered ipu2_csi1 capture as /dev/video7 [ 3.188462] imx6-mipi-csi2 21dc000.mipi: Consider updating driver imx6-mipi-csi2 to match on endpoints [ 3.211558] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 3.217157] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 3.263713] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.275718] NET: Registered PF_INET6 protocol family [ 3.280446] Segment Routing with IPv6 [ 3.280504] In-situ OAM (IOAM) with IPv6 [ 3.280642] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.283246] NET: Registered PF_PACKET protocol family [ 3.283259] can: controller area network core [ 3.283468] NET: Registered PF_CAN protocol family [ 3.283484] can: raw protocol [ 3.283630] can: broadcast manager protocol [ 3.283670] can: netlink gateway - max_hops=1 [ 3.284166] Key type dns_resolver registered [ 3.310528] Registering SWP/SWPB emulation handler [ 3.311482] Loading compiled-in X.509 certificates [ 3.478165] imx_usb 2184200.usb: No over current polarity defined [ 3.482811] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 3.483287] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 3.515062] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 3.517085] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.517103] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.517116] usb usb1: Product: EHCI Host Controller [ 3.517125] usb usb1: Manufacturer: Linux 6.1.59-cip8-rt4 ehci_hcd [ 3.517134] usb usb1: SerialNumber: ci_hdrc.1 [ 3.521881] hub 1-0:1.0: USB hub found [ 3.522254] hub 1-0:1.0: 1 port detected [ 3.529398] video-mux 20e0000.iomuxc-gpr:ipu1_csi0_mux: Consider updating driver video-mux to match on endpoints [ 3.532821] video-mux 20e0000.iomuxc-gpr:ipu2_csi1_mux: Consider updating driver video-mux to match on endpoints [ 3.539077] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 3.547508] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.564209] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.572403] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.622884] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.624175] ALSA device list: [ 3.624310] No soundcards found. [ 3.639944] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.639959] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 3.643454] Freeing unused kernel image (initmem) memory: 1024K [ 3.716855] Run /init as init process [ 3.805372] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: OK Running sysctl: [ 4.021063] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.01 [ 4.021095] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.021113] usb 1-1: Product: USB2.0 Hub [ 4.021130] usb 1-1: Manufacturer: GenesysLogic [ 4.026256] hub 1-1:1.0: USB hub found [ 4.034274] hub 1-1:1.0: 4 ports detected [ 4.052579] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW OK Populating /dev using udev: [ 4.110407] udevd[217]: starting version 3.2.9 [ 4.125329] udevd[217]: specified user 'tss' unknown [ 4.125522] udevd[217]: specified group 'tss' unknown [ 4.133221] udevd[218]: starting eudev-3.2.9 [ 4.736010] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.807655] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.851050] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 4.851067] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6q.bin [ 4.876027] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.951504] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 4.951529] imx-sdma 20ec000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 4.956885] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 5.036245] fsl-asoc-card sound: ASoC: driver name too long 'imx6-wandboard-sgtl5000' -> 'imx6-wandboard-' [ 5.086234] ov5645 1-003c: ov5645_write_reg: write reg error -6: reg=3103, val=11 [ 5.086258] ov5645 1-003c: could not set init registers [ 5.086570] ov5645 1-003c: could not power up OV5645 done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1005605/environment . /lava-1005605/environment / # /lava-1005605/bin/lava-test-runner /lava-1005605/0 /lava-1005605/bin/lava-test-runner /lava-1005605/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1005605/0/tests/0_dmesg + cat uuid + UUID=1005605_1.5.2.3.1[ 6.474307] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.578086] [ 6.673712] + set +x [ 6.769686] [ 6.772356] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1005605/environment / # . /lava-1005605/environment/lava-1005605/bin/lava-test-runner /lava-1005605/1 / # /lava-1005605/bin/lava-test-runner /lava-1005605/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1005605/1/tests/1_bootrr + cat uuid + UUID=1005605_1.5.2.3.5[ 7.394227] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1005605/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1005605/1/../bin/lava-test-case [ 7.550764] /lava-1005605/1/../bin/lava-test-case [ 7.652750] /lava-1005605/1/../bin/lava-test-case [ 7.701259] + set +x