Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2020.10 (Apr 28 2023 - 11:09:01 +0100) Trying to boot from MMC2 U-Boot 2020.10 (Apr 28 2023 - 11:09:01 +0100) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... Unable to use mmc 1:1... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.1.60 (1035 ms) => setenv serverip 192.168.1.1 setenv serverip 192.168.1.1 => tftp 0x82000000 1028800/tftp-deploy-se7e2apu/kernel/zImage tftp 0x82000000 1028800/tftp-deploy-se7e2apu/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.60 Filename '1028800/tftp-deploy-se7e2apu/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# 3.9 MiB/s done Bytes transferred = 10490368 (a01200 hex) => tftp 0x83000000 1028800/tftp-deploy-se7e2apu/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1028800/tftp-deploy-se7e2apu/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.60 Filename '1028800/tftp-deploy-se7e2apu/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# 4 MiB/s done Bytes transferred = 17162999 (105e2f7 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1028800/tftp-deploy-se7e2apu/dtb/am335x-boneblack.dtb tftp 0x88000000 1028800/tftp-deploy-se7e2apu/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.60 Filename '1028800/tftp-deploy-se7e2apu/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *##### 3.7 MiB/s done Bytes transferred = 69937 (11131 hex) =>setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-10-28 21:01:51 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17162935 Bytes = 16.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 88014130 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.59-cip8-rt4 (KernelCI@build-j84159-arm-gcc-10-multi-v7-defconfig-wwqzk) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Sat Oct 28 19:18:40 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129540 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 408500K/522240K available (14336K kernel code, 2469K rwdata, 6264K rodata, 2048K init, 428K bss, 48204K reserved, 65536K cma-reserved, 0K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000003] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008334] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.019103] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.033827] Console: colour dummy device 80x30 <3>[ 0.038704] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.045760] This ensures that you still see kernel messages. Please <3>[ 0.052480] update your kernel commandline. <6>[ 0.057090] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.096104] CPU: Testing write buffer coherency: ok <6>[ 0.101467] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106924] pid_max: default: 32768 minimum: 301 <6>[ 0.112136] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.119955] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.129263] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.135802] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.145389] rcu: Hierarchical SRCU implementation. <6>[ 0.145399] rcu: Max phase no-delay instances is 1000. <6>[ 0.145497] printk: bootconsole [omap8250] printing thread started <6>[ 0.168048] EFI services will not be available. <6>[ 0.168311] smp: Bringing up secondary CPUs ... <6>[ 0.168318] smp: Brought up 1 node, 1 CPU <6>[ 0.168328] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.168338] CPU: All CPU(s) started in SVC mode. <6>[ 0.169009] devtmpfs: initialized <6>[ 0.211472] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.211752] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.211780] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.216835] pinctrl core: initialized pinctrl subsystem <6>[ 0.221956] DMI not present or invalid. <6>[ 0.222805] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.225316] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.228554] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.228707] cpuidle: using governor menu <6>[ 0.246490] No ATAGs? <6>[ 0.246507] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 0.251837] Serial: AMBA PL011 UART driver <6>[ 1.431800] iommu: Default domain type: Translated <6>[ 1.431818] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 1.432538] SCSI subsystem initialized <6>[ 1.433332] usbcore: registered new interface driver usbfs <6>[ 1.433380] usbcore: registered new interface driver hub <6>[ 1.433430] usbcore: registered new device driver usb <6>[ 1.434382] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.434393] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.434412] PTP clock support registered <6>[ 1.434570] EDAC MC: Ver: 3.0.0 <6>[ 1.437357] vgaarb: loaded <6>[ 1.437941] clocksource: Switched to clocksource dmtimer <6>[ 1.561388] NET: Registered PF_INET protocol family <6>[ 1.561686] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 1.562782] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 1.562818] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 1.562837] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 1.562882] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) <6>[ 1.562981] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 1.563088] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 1.563112] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 1.563261] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 1.564143] RPC: Registered named UNIX socket transport module. <6>[ 1.564158] RPC: Registered udp transport module. <6>[ 1.564162] RPC: Registered tcp transport module. <6>[ 1.564166] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.564180] PCI: CLS 0 bytes, default 64 <5>[ 1.565581] Initialise system trusted keyrings <6>[ 1.566263] Trying to unpack rootfs image as initramfs... <6>[ 1.578464] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 1.585123] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 1.586155] NFS: Registering the id_resolver key type <5>[ 1.586236] Key type id_resolver registered <5>[ 1.586242] Key type id_legacy registered <6>[ 1.586357] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 1.586367] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 1.586404] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 1.587025] Key type asymmetric registered <5>[ 1.587035] Asymmetric key parser 'x509' registered <6>[ 1.587203] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 1.587214] io scheduler mq-deadline registered <6>[ 1.587221] io scheduler kyber registered <6>[ 1.916583] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 1.920792] SuperH (H)SCI(F) driver initialized <6>[ 1.921423] msm_serial: driver initialized <6>[ 1.921431] STMicroelectronics ASC driver initialized <6>[ 1.922793] STM32 USART driver initialized <6>[ 1.959920] brd: module loaded <6>[ 1.966225] loop: module loaded <6>[ 1.976328] CAN device driver interface <6>[ 1.977015] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 1.977668] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.977674] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.977765] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.977770] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.980684] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 1.980754] usbcore: registered new interface driver pegasus <6>[ 1.980811] usbcore: registered new interface driver asix <6>[ 1.980859] usbcore: registered new interface driver ax88179_178a <6>[ 1.980901] usbcore: registered new interface driver cdc_ether <6>[ 1.980945] usbcore: registered new interface driver smsc75xx <6>[ 1.980988] usbcore: registered new interface driver smsc95xx <6>[ 1.981023] usbcore: registered new interface driver net1080 <6>[ 1.981055] usbcore: registered new interface driver cdc_subset <6>[ 1.981090] usbcore: registered new interface driver zaurus <6>[ 1.981161] usbcore: registered new interface driver cdc_ncm <6>[ 1.984406] usbcore: registered new interface driver usb-storage <6>[ 1.988573] i2c_dev: i2c /dev entries driver <5>[ 2.000848] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 2.002729] sdhci: Secure Digital Host Controller Interface driver <6>[ 2.002742] sdhci: Copyright(c) Pierre Ossman <6>[ 2.004102] Synopsys Designware Multimedia Card Interface Driver <6>[ 2.005258] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 2.058822] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 2.061642] usbcore: registered new interface driver usbhid <6>[ 2.061660] usbhid: USB HID core driver <6>[ 2.068644] NET: Registered PF_INET6 protocol family <6>[ 2.079392] Segment Routing with IPv6 <6>[ 2.079454] In-situ OAM (IOAM) with IPv6 <6>[ 2.079544] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.080352] NET: Registered PF_PACKET protocol family <6>[ 2.080365] can: controller area network core <6>[ 2.080443] NET: Registered PF_CAN protocol family <6>[ 2.080452] can: raw protocol <6>[ 2.080461] can: broadcast manager protocol <6>[ 2.080476] can: netlink gateway - max_hops=1 <5>[ 2.081086] Key type dns_resolver registered <6>[ 2.081262] ThumbEE CPU extension supported. <5>[ 2.081282] Registering SWP/SWPB emulation handler <3>[ 2.081737] omap_voltage_late_init: Voltage driver support not added <5>[ 2.083762] Loading compiled-in X.509 certificates <6>[ 2.155106] platform 44e10800.pinmux: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@10000/scm@0/pinmux@800/pinmux_clkout2_pin <6>[ 2.156496] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <4>[ 2.172356] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 2.255938] ti-sysc: probe of 48040000.target-module failed with error -16 <4>[ 2.289123] gpio gpiochip0: (gpio-0-31): not an immutable chip, please consider fixing it! <6>[ 2.668914] OMAP GPIO hardware version 0.1 <4>[ 2.719683] at24 2-0054: supply vcc not found, using dummy regulator <4>[ 2.753598] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 2.781311] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 2.811100] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 2.841166] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <4>[ 2.849441] gpio gpiochip1: (gpio-32-63): not an immutable chip, please consider fixing it! <4>[ 2.861318] gpio gpiochip2: (gpio-64-95): not an immutable chip, please consider fixing it! <4>[ 2.901401] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 2.901794] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 2.958417] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 2.975613] random: crng init done <6>[ 3.028419] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 3.750804] Freeing initrd memory: 16764K <6>[ 3.787729] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 3.788142] cpsw-switch 4a100000.switch: initialized cpsw ale version 1.4 <6>[ 3.788156] cpsw-switch 4a100000.switch: ALE Table size 1024 <6>[ 3.811352] cpsw-switch 4a100000.switch: cpts: overflow check period 500 (jiffies) <6>[ 3.811368] cpsw-switch 4a100000.switch: CPTS: ref_clk_freq:250000000 calc_mult:2147483648 calc_shift:29 error:0 nsec/sec <6>[ 3.811445] cpsw-switch 4a100000.switch: Detected MACID = f4:b8:98:ab:fa:84 <5>[ 3.812894] cpsw-switch 4a100000.switch: initialized (regs 0x4a100000, pool size 256) hw_ver:0019010C 1.12 (0) <3>[ 3.830545] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.830579] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 3.936076] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <4>[ 3.944467] gpio gpiochip3: (gpio-96-127): not an immutable chip, please consider fixing it! <3>[ 3.949663] l3-aon-clkctrl:0000:0: failed to disable <6>[ 3.977055] printk: console [ttyS0] enabled <6>[ 3.977064] printk: bootconsole [omap8250] disabled <6>[ 3.977103] printk: console [ttyS0] printing thread started <6>[ 3.992799] printk: bootconsole [omap8250] printing thread stopped <4>[ 4.018638] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.025935] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.048230] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.049907] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 4.050220] i2c 0-0070: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0/port/endpoint@0 <6>[ 4.050639] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.062624] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.062652] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.062852] sdhci-omap 48060000.mmc: supply pbias not found, using dummy regulator <4>[ 4.063276] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <4>[ 4.092844] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 4.093251] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.277094] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <6>[ 4.278981] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.280458] cpsw-switch 4a100000.switch: starting ndev. mode: dual_mac <6>[ 4.357636] mmc1: new high speed MMC card at address 0001 <6>[ 4.360175] mmcblk1: mmc1:0001 MK2704 3.53 GiB <6>[ 4.376220] mmcblk1: p1 <6>[ 4.379010] mmcblk1boot0: mmc1:0001 MK2704 2.00 MiB <6>[ 4.383544] mmcblk1boot1: mmc1:0001 MK2704 2.00 MiB <6>[ 4.401408] mmcblk1rpmb: mmc1:0001 MK2704 512 KiB, chardev (236:0) <6>[ 4.402568] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 7.558875] cpsw-switch 4a100000.switch eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.559024] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.617949] Sending DHCP requests ., OK <6>[ 7.658146] IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.60 <6>[ 7.658197] IP-Config: Complete: <6>[ 7.658207] device=eth0, hwaddr=f4:b8:98:ab:fa:84, ipaddr=192.168.1.60, mask=255.255.255.0, gw=192.168.1.1 <6>[ 7.658245] host=192.168.1.60, domain=example.org, nis-domain=(none) <6>[ 7.658263] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= <6>[ 7.658283] nameserver0=192.168.1.1 <6>[ 7.671274] Freeing unused kernel image (initmem) memory: 2048K <6>[ 7.739294] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.963288] udevd[108]: starting version 3.2.9 <27>[ 7.980170] udevd[108]: specified user 'tss' unknown <27>[ 7.980369] udevd[108]: specified group 'tss' unknown <30>[ 8.001372] udevd[109]: starting eudev-3.2.9 <4>[ 10.563120] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 10.563457] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <4>[ 10.619441] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 10.619739] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 10.697039] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 10.697085] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 10.858306] hub 1-0:1.0: USB hub found <6>[ 10.858408] hub 1-0:1.0: 1 port detected <6>[ 11.880102] tda998x 0-0070: found TDA19988 done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1028800/environment . /lava-1028800/environment / # /lava-1028800/bin/lava-test-runner /lava-1028800/0 /lava-1028800/bin/lava-test-runner /lava-1028800/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1028800/0/tests/0_dmesg + cat uuid + UUID=1028800_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 16.960177] <8>[ 17.019117] <8>[ 17.074285] + set +x / # <8>[ 17.129913] <8>[ 17.131717] # / # export SHELL=/bin/sh. /lava-1028800/environment / # . /lava-1028800/environment/lava-1028800/bin/lava-test-runner /lava-1028800/1 / # /lava-1028800/bin/lava-test-runner /lava-1028800/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1028800/1/tests/1_bootrr + cat uuid + UUID=1028800_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-<8>[ 17.682675] 1028800/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1028800/1/../bin/lava-test-case <8>[ 17.756123] /lava-1028800/1/../bin/lava-test-case <8>[ 17.808602] /lava-1028800/1/../bin/lava-test-case <8>[ 17.865524] /lava-1028800/1/../bin/lava-test-case <8>[ 17.950003] /lava-1028800/1/../bin/lava-test-case <8>[ 17.999578] /lava-1028800/1/../bin/lava-test-case <8>[ 18.038516] /lava-1028800/1/../bin/lava-test-case <8>[ 18.087130] /lava-1028800/1/../bin/lava-test-case <8>[ 18.135489] /lava-1028800/1/../bin/lava-test-case <8>[ 18.174856] /lava-1028800/1/../bin/lava-test-case <8>[ 18.223336] /lava-1028800/1/../bin/lava-test-case <8>[ 19.287110] /lava-1028800/1/../bin/lava-test-case <8>[ 20.355872] /lava-1028800/1/../bin/lava-test-case <8>[ 20.394658] /lava-1028800/1/../bin/lava-test-case <8>[ 20.432729] /lava-1028800/1/../bin/lava-test-case <8>[ 20.472304] /lava-1028800/1/../bin/lava-test-case <8>[ 20.520579] /lava-1028800/1/../bin/lava-test-case <8>[ 20.560745] /lava-1028800/1/../bin/lava-test-case <8>[ 20.609671] /lava-1028800/1/../bin/lava-test-case <8>[ 20.656536] /lava-1028800/1/../bin/lava-test-case <8>[ 20.695756] /lava-1028800/1/../bin/lava-test-case <8>[ 20.744600] /lava-1028800/1/../bin/lava-test-case <8>[ 20.792771] /lava-1028800/1/../bin/lava-test-case <8>[ 20.833023] /lava-1028800/1/../bin/lava-test-case <8>[ 20.882513] /lava-1028800/1/../bin/lava-test-case <8>[ 20.922026] /lava-1028800/1/../bin/lava-test-case <8>[ 20.970841] /lava-1028800/1/../bin/lava-test-case <8>[ 21.010066] /lava-1028800/1/../bin/lava-test-case <8>[ 21.059056] /lava-1028800/1/../bin/lava-test-case <8>[ 21.099202] /lava-1028800/1/../bin/lava-test-case <8>[ 21.148682] /lava-1028800/1/../bin/lava-test-case <8>[ 21.188445] /lava-1028800/1/../bin/lava-test-case <8>[ 21.236843] /lava-1028800/1/../bin/lava-test-case <8>[ 22.305304] /lava-1028800/1/../bin/lava-test-case <8>[ 23.365233] /lava-1028800/1/../bin/lava-test-case <8>[ 23.406758] /lava-1028800/1/../bin/lava-test-case <8>[ 23.455648] /lava-1028800/1/../bin/lava-test-case <8>[ 24.524813] /lava-1028800/1/../bin/lava-test-case <8>[ 25.594808] /lava-1028800/1/../bin/lava-test-case <8>[ 26.659022] /lava-1028800/1/../bin/lava-test-case <8>[ 27.726130] /lava-1028800/1/../bin/lava-test-case <8>[ 28.794400] /lava-1028800/1/../bin/lava-test-case <8>[ 29.864971] /lava-1028800/1/../bin/lava-test-case <8>[ 30.928997] /lava-1028800/1/../bin/lava-test-case <8>[ 31.996165] /lava-1028800/1/../bin/lava-test-case <8>[ 32.035614] /lava-1028800/1/../bin/lava-test-case <8>[ 32.084022] /lava-1028800/1/../bin/lava-test-case <8>[ 32.123654] /lava-1028800/1/../bin/lava-test-case <8>[ 32.172285] /lava-1028800/1/../bin/lava-test-case /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: <8>[ 32.211574] line 84: assert_device-present: not found /lava-1028800/1/../bin/lava-test-case <8>[ 32.252644] /lava-1028800/1/../bin/lava-test-case <8>[ 32.301703] /lava-1028800/1/../bin/lava-test-case <8>[ 32.346861] + set +x