[Enter `^Ec?' for help] U-Boot SPL 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45) U-Boot 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45 +0000) Model: Radxa Rock 2 Square DRAM: 2 GiB MMC: dwmmc@ff0c0000: 0, dwmmc@ff0f0000: 1 In: serial@ff690000 Out: serial@ff690000 Err: serial@ff690000 Incorrect eeprom header Net: eth0: ethernet@ff290000 Hit any key to stop autoboot: 1  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp ethernet@ff290000 Waiting for PHY auto negotiation to complete...... done Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.22 (260 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x2000000 11899556/tftp-deploy-7as8ftfe/kernel/zImage tftp 0x2000000 11899556/tftp-deploy-7as8ftfe/kernel/zImage Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '11899556/tftp-deploy-7as8ftfe/kernel/zImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# 3.7 MiB/s done Bytes transferred = 10490368 (a01200 hex) => tftp 0x4000000 11899556/tftp-deploy-7as8ftfe/ramdisk/ramdisk.cpio.gz.uboot tftp 0x4000000 11899556/tftp-deploy-7as8ftfe/ramdisk/ramdisk.cpio.gz.uboot Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '11899556/tftp-deploy-7as8ftfe/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x4000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################ 3.6 MiB/s done Bytes transferred = 17155878 (105c726 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x1f00000 11899556/tftp-deploy-7as8ftfe/dtb/rk3288-rock2-square.dtb tftp 0x1f00000 11899556/tftp-deploy-7as8ftfe/dtb/rk3288-rock2-square.dtb Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '11899556/tftp-deploy-7as8ftfe/dtb/rk3288-rock2-square.dtb'. Load address: 0x1f00000 Loading: *### 2.7 MiB/s done Bytes transferred = 41716 (a2f4 hex) => setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x2000000 0x4000000 0x1f00000 bootz 0x2000000 0x4000000 0x1f00000 Kernel image @ 0x2000000 [ 0x000000 - 0xa01200 ] ## Loading init Ramdisk from Legacy Image at 04000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17155814 Bytes = 16.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Using Device Tree in place at 01f00000, end 01f0d2f3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x500 [ 0.000000] Linux version 6.1.59-cip8-rt4 (KernelCI@build-j84159-arm-gcc-10-multi-v7-defconfig-wwqzk) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Sat Oct 28 19:18:40 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Radxa Rock 2 Square [ 0.000000] earlycon: uart0 at MMIO32 0xff690000 (options '115200n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 1970772K/2097152K available (14336K kernel code, 2469K rwdata, 6264K rodata, 2048K init, 428K bss, 60844K reserved, 65536K cma-reserved, 1245184K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.009083] Switching to timer-based delay loop, resolution 41ns <6>[ 0.024448] Console: colour dummy device 80x30 <6>[ 0.029665] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.041341] CPU: Testing write buffer coherency: ok <6>[ 0.047019] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.052863] pid_max: default: 32768 minimum: 301 <6>[ 0.058398] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.066740] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.076486] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500 <6>[ 0.084110] Setting up static identity map for 0x300000 - 0x3000ac <6>[ 0.093622] rcu: Hierarchical SRCU implementation. <6>[ 0.093628] rcu: Max phase no-delay instances is 1000. <6>[ 0.093721] printk: bootconsole [uart0] printing thread started <6>[ 0.117501] EFI services will not be available. <6>[ 0.117851] smp: Bringing up secondary CPUs ... <6>[ 0.119666] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501 <6>[ 0.119685] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.121614] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502 <6>[ 0.121632] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.123559] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503 <6>[ 0.123577] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.123699] smp: Brought up 1 node, 4 CPUs <6>[ 0.123712] SMP: Total of 4 processors activated (192.00 BogoMIPS). <6>[ 0.123722] CPU: All CPU(s) started in SVC mode. <6>[ 0.129858] devtmpfs: initialized <6>[ 0.139776] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0 <6>[ 0.139989] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.140010] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.142070] pinctrl core: initialized pinctrl subsystem <6>[ 0.146359] DMI not present or invalid. <6>[ 0.147203] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.239647] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.242835] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.247974] cpuidle: using governor menu <6>[ 0.248688] No ATAGs? <6>[ 0.248825] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.248837] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.252628] Serial: AMBA PL011 UART driver <6>[ 0.277106] platform ff980000.hdmi: Fixed dependency cycle(s) with /vop@ff940000/port/endpoint@0 <6>[ 0.277139] platform ff980000.hdmi: Fixed dependency cycle(s) with /vop@ff930000/port/endpoint@0 <6>[ 0.292946] rockchip-gpio ff750000.gpio: probed /pinctrl/gpio@ff750000 <6>[ 0.293693] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000 <6>[ 0.294415] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000 <6>[ 0.295138] rockchip-gpio ff7a0000.gpio: probed /pinctrl/gpio@ff7a0000 <6>[ 0.295958] rockchip-gpio ff7b0000.gpio: probed /pinctrl/gpio@ff7b0000 <6>[ 0.296682] rockchip-gpio ff7c0000.gpio: probed /pinctrl/gpio@ff7c0000 <6>[ 0.297401] rockchip-gpio ff7d0000.gpio: probed /pinctrl/gpio@ff7d0000 <6>[ 0.298125] rockchip-gpio ff7e0000.gpio: probed /pinctrl/gpio@ff7e0000 <6>[ 0.298844] rockchip-gpio ff7f0000.gpio: probed /pinctrl/gpio@ff7f0000 <6>[ 0.384920] iommu: Default domain type: Translated <6>[ 0.384929] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.385816] SCSI subsystem initialized <6>[ 0.386325] usbcore: registered new interface driver usbfs <6>[ 0.386375] usbcore: registered new interface driver hub <6>[ 0.386421] usbcore: registered new device driver usb <6>[ 0.389105] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.389112] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.389133] PTP clock support registered <6>[ 0.389405] EDAC MC: Ver: 3.0.0 <6>[ 0.393234] vgaarb: loaded <6>[ 2.008883] clocksource: Switched to clocksource arch_sys_counter <6>[ 2.021352] NET: Registered PF_INET protocol family <6>[ 2.021617] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 2.023899] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 2.023932] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 2.023949] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 2.024030] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 2.024401] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 2.024508] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 2.024561] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 2.024775] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 2.025461] RPC: Registered named UNIX socket transport module. <6>[ 2.025470] RPC: Registered udp transport module. <6>[ 2.025475] RPC: Registered tcp transport module. <6>[ 2.025479] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.025487] PCI: CLS 0 bytes, default 64 <6>[ 2.026731] Trying to unpack rootfs image as initramfs... <6>[ 2.193440] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available <5>[ 2.195353] Initialise system trusted keyrings <6>[ 2.195661] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 2.202516] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 2.203335] NFS: Registering the id_resolver key type <5>[ 2.203374] Key type id_resolver registered <5>[ 2.203380] Key type id_legacy registered <6>[ 2.203490] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 2.203498] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 2.203535] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 2.204110] Key type asymmetric registered <5>[ 2.204119] Asymmetric key parser 'x509' registered <6>[ 2.204304] bounce: pool size: 64 pages <6>[ 2.204435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 2.204444] io scheduler mq-deadline registered <6>[ 2.204451] io scheduler kyber registered <6>[ 2.354401] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 2.354418] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 <6>[ 2.356139] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 2.356153] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10 <6>[ 2.443998] printk: console [ttyS2] enabled <6>[ 2.444008] printk: bootconsole [uart0] disabled <6>[ 2.444042] printk: console [ttyS2] printing thread started <6>[ 2.449083] printk: bootconsole [uart0] printing thread stopped <6>[ 2.458273] SuperH (H)SCI(F) driver initialized <6>[ 2.460092] msm_serial: driver initialized <6>[ 2.460098] STMicroelectronics ASC driver initialized <6>[ 2.462020] STM32 USART driver initialized <6>[ 2.489045] brd: module loaded <6>[ 2.495950] loop: module loaded <6>[ 2.514690] CAN device driver interface <6>[ 2.516768] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 2.518793] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 2.518798] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 2.518914] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 2.518920] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 2.527058] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 2.527114] usbcore: registered new interface driver pegasus <6>[ 2.527166] usbcore: registered new interface driver asix <6>[ 2.527218] usbcore: registered new interface driver ax88179_178a <6>[ 2.527266] usbcore: registered new interface driver cdc_ether <6>[ 2.527320] usbcore: registered new interface driver smsc75xx <6>[ 2.527373] usbcore: registered new interface driver smsc95xx <6>[ 2.527415] usbcore: registered new interface driver net1080 <6>[ 2.527457] usbcore: registered new interface driver cdc_subset <6>[ 2.527497] usbcore: registered new interface driver zaurus <6>[ 2.527581] usbcore: registered new interface driver cdc_ncm <4>[ 2.531064] dwc2 ff540000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.531201] dwc2 ff540000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.646024] dwc2 ff540000.usb: DWC OTG Controller <6>[ 2.646058] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.646095] dwc2 ff540000.usb: irq 51, io mem 0xff540000 <6>[ 2.646999] hub 1-0:1.0: USB hub found <6>[ 2.647049] hub 1-0:1.0: 1 port detected <4>[ 2.647826] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.647973] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.778976] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM <6>[ 2.782007] dwc2 ff580000.usb: DWC OTG Controller <6>[ 2.782039] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2 <6>[ 2.782075] dwc2 ff580000.usb: irq 52, io mem 0xff580000 <6>[ 2.782880] hub 2-0:1.0: USB hub found <6>[ 2.782932] hub 2-0:1.0: 1 port detected <6>[ 2.785603] ehci-platform ff500000.usb: EHCI Host Controller <6>[ 2.785633] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3 <6>[ 2.788694] usbcore: registered new interface driver usb-storage <6>[ 2.797836] i2c_dev: i2c /dev entries driver <6>[ 2.802406] i2c 0-005a: Fixed dependency cycle(s) with /i2c@ff650000/act8846@5a/regulators/REG4 <6>[ 2.802517] i2c 0-005a: Fixed dependency cycle(s) with /i2c@ff650000/act8846@5a/regulators/REG2 <6>[ 2.806963] VDD_LOG: Bringing 1100000uV into 1000000-1000000uV <6>[ 2.833217] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! <6>[ 2.837801] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! <4>[ 2.860655] dw_wdt ff800000.watchdog: No valid TOPs array specified <6>[ 2.871717] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 500000 KHz, changing to: 600000 KHz <6>[ 2.874938] sdhci: Secure Digital Host Controller Interface driver <6>[ 2.874943] sdhci: Copyright(c) Pierre Ossman <6>[ 2.877643] Synopsys Designware Multimedia Card Interface Driver <6>[ 2.879143] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.880138] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 2.950727] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 2.952613] usbcore: registered new interface driver usbhid <6>[ 2.952621] usbhid: USB HID core driver <6>[ 2.956897] NET: Registered PF_INET6 protocol family <6>[ 2.957148] ehci-platform ff500000.usb: irq 53, io mem 0xff500000 <6>[ 2.964187] Segment Routing with IPv6 <6>[ 2.964209] In-situ OAM (IOAM) with IPv6 <6>[ 2.964242] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.964508] NET: Registered PF_PACKET protocol family <6>[ 2.964511] can: controller area network core <6>[ 2.964534] NET: Registered PF_CAN protocol family <6>[ 2.964537] can: raw protocol <6>[ 2.964539] can: broadcast manager protocol <6>[ 2.964544] can: netlink gateway - max_hops=1 <5>[ 2.964717] Key type dns_resolver registered <6>[ 2.964766] ThumbEE CPU extension supported. <5>[ 2.964771] Registering SWP/SWPB emulation handler <5>[ 2.965060] Loading compiled-in X.509 certificates <6>[ 2.978888] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00 <6>[ 2.979191] hub 3-0:1.0: USB hub found <6>[ 2.979206] hub 3-0:1.0: 1 port detected <6>[ 2.986386] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 2.986435] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <6>[ 2.987004] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input). <6>[ 2.987009] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30). <6>[ 2.987013] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10). <6>[ 2.987018] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no). <6>[ 2.987037] rk_gmac-dwmac ff290000.ethernet: clock input from PHY <6>[ 2.992047] rk_gmac-dwmac ff290000.ethernet: init for RGMII <6>[ 2.992173] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35 <6>[ 2.992181] rk_gmac-dwmac ff290000.ethernet: DWMAC1000 <6>[ 2.992184] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported <6>[ 2.992187] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported <6>[ 2.992189] rk_gmac-dwmac ff290000.ethernet: COE Type 2 <6>[ 2.992192] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported <6>[ 2.992194] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported <6>[ 2.992234] rk_gmac-dwmac ff290000.ethernet: Normal descriptors <6>[ 2.992237] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled <6>[ 2.992239] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer <6>[ 3.181274] Freeing initrd memory: 16756K <6>[ 3.209801] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.209814] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.209839] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.213355] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL) <6>[ 3.213361] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL) <6>[ 3.218963] dwmmc_rockchip ff0c0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.219025] dwmmc_rockchip ff0f0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.219028] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.220210] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 3.268869] usb 3-1: new high-speed USB device number 2 using ehci-platform <6>[ 3.307542] dwmmc_rockchip ff0c0000.mmc: Using internal DMA controller. <6>[ 3.307548] dwmmc_rockchip ff0c0000.mmc: Version ID is 270a <6>[ 3.307571] dwmmc_rockchip ff0c0000.mmc: DW MMC controller at irq 62,32 bit host data width,256 deep fifo <6>[ 3.307740] dwmmc_rockchip ff0f0000.mmc: Using internal DMA controller. <6>[ 3.307746] dwmmc_rockchip ff0f0000.mmc: Version ID is 270a <6>[ 3.307768] dwmmc_rockchip ff0f0000.mmc: DW MMC controller at irq 63,32 bit host data width,256 deep fifo <6>[ 3.307838] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.307844] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.307854] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.310269] dwmmc_rockchip ff0f0000.mmc: allocated mmc-pwrseq <6>[ 3.310273] mmc_host mmc1: card is non-removable. <6>[ 3.313849] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.322770] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 3.322843] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 3.409742] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 3.410518] mmc1: new high speed MMC card at address 0001 <6>[ 3.410857] mmcblk1: mmc1:0001 032GE4 29.1 GiB <6>[ 3.413645] mmcblk1: p1 p2 <6>[ 3.414034] mmcblk1boot0: mmc1:0001 032GE4 4.00 MiB <6>[ 3.414926] mmcblk1boot1: mmc1:0001 032GE4 4.00 MiB <6>[ 3.415656] mmcblk1rpmb: mmc1:0001 032GE4 4.00 MiB, chardev (236:0) <6>[ 3.471235] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.471243] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.471259] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.475121] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.475269] rk_gmac-dwmac ff290000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 <6>[ 3.476126] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.476132] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.476146] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.477047] rk_gmac-dwmac ff290000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) <6>[ 3.480719] hub 3-1:1.0: USB hub found <6>[ 3.481039] hub 3-1:1.0: 4 ports detected <6>[ 3.485083] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.486172] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found <6>[ 3.486180] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW <6>[ 3.592113] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.592123] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.592142] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.592259] rk_gmac-dwmac ff290000.ethernet eth0: configuring for phy/rgmii link mode <6>[ 6.750266] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 6.750361] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 6.808942] Sending DHCP requests ., OK <6>[ 6.849104] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.22 <6>[ 6.849158] IP-Config: Complete: <6>[ 6.849170] device=eth0, hwaddr=4a:01:9c:e5:04:ff, ipaddr=192.168.201.22, mask=255.255.255.0, gw=192.168.201.1 <6>[ 6.849229] host=rk3288-rock2-square-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 6.849257] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 6.849289] nameserver0=192.168.201.1 <4>[ 6.852371] dw-apb-uart ff690000.serial: forbid DMA for kernel console <6>[ 6.861031] Freeing unused kernel image (initmem) memory: 2048K <6>[ 6.950678] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.028018] udevd[115]: starting version 3.2.9 <5>[ 7.028790] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 7.029287] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 7.029610] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 7.033637] udevd[115]: specified user 'tss' unknown <27>[ 7.033698] udevd[115]: specified group 'tss' unknown <30>[ 7.034937] udevd[116]: starting eudev-3.2.9 <6>[ 7.250437] rockchip-vop ff930000.vop: Adding to iommu group 0 <6>[ 7.250732] rockchip-vop ff940000.vop: Adding to iommu group 1 <6>[ 7.253452] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 7.253744] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm]) <4>[ 7.253844] dwhdmi-rockchip ff980000.hdmi: supply avdd-0v9 not found, using dummy regulator <4>[ 7.253926] dwhdmi-rockchip ff980000.hdmi: supply avdd-1v8 not found, using dummy regulator <6>[ 7.254006] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY) <6>[ 7.254202] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 7.254370] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 7.254377] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 7.254391] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 7.255105] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) <6>[ 7.255487] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 <6>[ 7.255522] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 7.255770] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 7.255781] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 7.259641] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 7.410906] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 7.410916] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 7.410933] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 7.416884] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 7.417089] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 7.417096] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 7.417110] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 7.430219] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <4>[ 7.446132] rtc-hym8563 0-0051: no valid clock/calendar values available <6>[ 7.446410] rtc-hym8563 0-0051: registered as rtc0 <4>[ 7.448290] rtc-hym8563 0-0051: no valid clock/calendar values available <3>[ 7.448296] rtc-hym8563 0-0051: hctosys: unable to read the hardware clock <6>[ 7.521747] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 7.521756] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 7.521772] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 7.522943] dwmmc_rockchip ff0d0000.mmc: allocated mmc-pwrseq <6>[ 7.522949] mmc_host mmc2: card is non-removable. <6>[ 7.538213] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 7.551065] panfrost ffa30000.gpu: clock rate = 400000000 <6>[ 7.551374] rk3288-crypto ff8a0000.crypto: will run requests pump with realtime priority <6>[ 7.551856] rk3288-crypto ff8a0000.crypto: Crypto Accelerator successfully registered <6>[ 7.554992] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1 <6>[ 7.554999] panfrost ffa30000.gpu: features: 00000000,00000407, issues: 00000000,24040400 <6>[ 7.555004] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 <6>[ 7.555009] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1 <6>[ 7.555719] [drm] Initialized panfrost 1.2.0 20180908 for ffa30000.gpu on minor 1 <6>[ 7.689598] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) <6>[ 7.691095] mmc2: new high speed SDIO card at address 0001 <5>[ 7.757996] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 7.783054] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 7.783116] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 done <6>[ 7.783123] cfg80211: failed to load regulatory.db Saving random seed: <6>[ 7.791388] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 <4>[ 7.791492] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.radxa,rock2-square.bin failed with error -2 OK<4>[ 7.791516] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-11899556/environment . /lava-11899556/environment / # /lava-11899556/bin/lava-test-runner /lava-11899556/0 /lava-11899556/bin/lava-test-runner /lava-11899556/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-11899556/0/tests/0_dmesg<8>[ 8.445468] + cat uuid + UUID=11899556_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 8.472349] <8>[ 8.489569] + <8>[ 8.502781] set +x <8>[ 8.518444] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-11899556/environment / # . /lava-11899556/environ<3>[ 8.799047] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 ment/lava-11899556/bin/lava-test-runner /lava-11899556/1 / # /lava-11899556/bin/lava-test-runner /lava-11899556/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-11899556/1/tests/1_boot<8>[ 8.998580] rr + cat uuid + UUID=11899556_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-11899556/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-11899556/1/../bin/lava-test-case <8>[ 9.034025] /lava-11899556/1/../bin/lava-test-case /lava-11899556/1/../bin/lava-test-case <8>[ 9.052706] <8>[ 9.061146] /lava-11899556/1/../bin/lava-test-case <8>[ 9.085230] /lava-11899556/1/../bin/lava-test-case /lava-11899556/1/../bin/lava-test-case <8>[ 9.102552] <8>[ 9.113692] /lava-11899556/1/../bin/lava-test-case <8>[ 9.140482] /lava-11899556/1/../bin/lava-test-case <8>[ 9.166920] /lava-11899556/1/../bin/lava-test-case + set +x