Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot 2016.03-imx_v2016.03_4.1.15_2.0.0_ga+g0ec2a01 (Nov 11 2016 - 03:13:54 -0600) CPU: Freescale i.MX7D rev1.3 996 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 24C Reset cause: POR Board: i.MX7D SABRESD RevA I2C: ready DRAM: 1 GiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Display: TFT43AB (480x272) Video: 480x272x24 In: serial Out: serial Err: serial switch to partitions #0, OK mmc0 is current device Net: FEC0 Normal Boot Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => setenv ipaddr 172.16.1.16; setenv serverip 172.16.1.4; setenv ethact FEC0; setenv ethprime FEC setenv ipaddr 172.16.1.16; setenv serverip 172.16.1.4; setenv ethact FEC0; setenv ethprime FEC => setenv serverip 59.144.98.45 setenv serverip 59.144.98.45 => tftp ${loadaddr} 1256169/tftp-deploy-wt_pv53p/kernel/zImage tftp ${loadaddr} 1256169/tftp-deploy-wt_pv53p/kernel/zImage Using FEC0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.16 Filename '1256169/tftp-deploy-wt_pv53p/kernel/zImage'. Load address: 0x80800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# 1.7 MiB/s done Bytes transferred = 10490368 (a01200 hex) => tftp ${initrd_addr} 1256169/tftp-deploy-wt_pv53p/ramdisk/ramdisk.cpio.gz.uboot tftp ${initrd_addr} 1256169/tftp-deploy-wt_pv53p/ramdisk/ramdisk.cpio.gz.uboot Using FEC0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.16 Filename '1256169/tftp-deploy-wt_pv53p/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# 11.9 MiB/s done Bytes transferred = 17170339 (105ffa3 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp ${fdt_addr} 1256169/tftp-deploy-wt_pv53p/dtb/imx7d-sdb.dtb tftp ${fdt_addr} 1256169/tftp-deploy-wt_pv53p/dtb/imx7d-sdb.dtb Using FEC0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.16 Filename '1256169/tftp-deploy-wt_pv53p/dtb/imx7d-sdb.dtb'. Load address: 0x83000000 Loading: *### 6.2 MiB/s done Bytes transferred = 38836 (97b4 hex) => setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz ${loadaddr} ${initrd_addr} ${fdt_addr} bootz ${loadaddr} ${initrd_addr} ${fdt_addr} Kernel image @ 0x80800000 [ 0x000000 - 0xa01200 ] ## Loading init Ramdisk from Legacy Image at 83800000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17170275 Bytes = 16.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 8300c7b3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.59-cip8-rt4 (KernelCI@build-j84159-arm-gcc-10-multi-v7-defconfig-wwqzk) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Sat Oct 28 19:18:40 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Freescale i.MX7 SabreSD Board [ 0.000000] earlycon: ec_imx6q0 at MMIO 0x30860000 (options '') [ 0.000000] printk: bootconsole [ec_imx6q0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000afffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x00000000b0000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 930536K/1048576K available (14336K kernel code, 2469K rwdata, 6264K rodata, 2048K init, 428K bss, 52504K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns <6>[ 0.000002] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns <6>[ 0.008310] Switching to timer-based delay loop, resolution 125ns <6>[ 0.016063] Switching to timer-based delay loop, resolution 41ns <6>[ 0.020999] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.029135] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.043841] Console: colour dummy device 80x30 <6>[ 0.045771] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.056410] CPU: Testing write buffer coherency: ok <6>[ 0.061554] pid_max: default: 32768 minimum: 301 <6>[ 0.066666] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.074070] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.083223] CPU0: update cpu_capacity 1024 <6>[ 0.086489] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.093432] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.100941] rcu: Hierarchical SRCU implementation. <6>[ 0.100948] rcu: Max phase no-delay instances is 1000. <6>[ 0.101050] printk: bootconsole [ec_imx6q0] printing thread started <6>[ 0.120000] EFI services will not be available. <6>[ 0.120278] smp: Bringing up secondary CPUs ... <6>[ 0.121225] CPU1: update cpu_capacity 1024 <6>[ 0.121238] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.121397] smp: Brought up 1 node, 2 CPUs <6>[ 0.121410] SMP: Total of 2 processors activated (96.00 BogoMIPS). <6>[ 0.121420] CPU: All CPU(s) started in SVC mode. <6>[ 0.122103] devtmpfs: initialized <6>[ 0.131798] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.132098] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.132126] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.135163] pinctrl core: initialized pinctrl subsystem <6>[ 0.139398] DMI not present or invalid. <6>[ 0.140600] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.209371] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.212576] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.216216] cpuidle: using governor menu <6>[ 0.216914] No ATAGs? <6>[ 0.217005] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.217018] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.220132] Serial: AMBA PL011 UART driver <6>[ 0.228198] platform soc: Fixed dependency cycle(s) with /soc/bus@30000000/gpc@303a0000 <6>[ 0.229254] amba 3007c000.etm: Fixed dependency cycle(s) with /soc/funnel@30041000/in-ports/port/endpoint <6>[ 0.229474] amba 30083000.funnel: Fixed dependency cycle(s) with /soc/funnel@30041000/out-ports/port/endpoint <6>[ 0.229683] amba 30084000.etf: Fixed dependency cycle(s) with /replicator/in-ports/port/endpoint <6>[ 0.229724] amba 30084000.etf: Fixed dependency cycle(s) with /soc/funnel@30083000/out-ports/port/endpoint <6>[ 0.229933] amba 30086000.etr: Fixed dependency cycle(s) with /replicator/out-ports/port@1/endpoint <6>[ 0.230131] amba 30087000.tpiu: Fixed dependency cycle(s) with /replicator/out-ports/port@0/endpoint <6>[ 0.234472] imx7d-pinctrl 302c0000.pinctrl: initialized IMX pinctrl driver <6>[ 0.235398] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc/bus@30000000/pinctrl@30330000/imx7d-sdb/hoggrp <6>[ 0.236198] imx7d-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver <6>[ 0.256498] amba 3007d000.etm: Fixed dependency cycle(s) with /soc/funnel@30041000/in-ports/port@1/endpoint <6>[ 0.262755] platform panel: Fixed dependency cycle(s) with /soc/bus@30400000/lcdif@30730000/port/endpoint <6>[ 0.386684] iommu: Default domain type: Translated <6>[ 0.386699] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.387603] SCSI subsystem initialized <6>[ 0.388259] usbcore: registered new interface driver usbfs <6>[ 0.388311] usbcore: registered new interface driver hub <6>[ 0.388358] usbcore: registered new device driver usb <4>[ 0.388651] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator <4>[ 0.388845] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests <4>[ 0.389161] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator <4>[ 0.389313] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests <6>[ 0.391149] i2c i2c-0: IMX I2C adapter registered <6>[ 0.391879] i2c i2c-1: IMX I2C adapter registered <6>[ 0.392495] i2c i2c-2: IMX I2C adapter registered <6>[ 0.393217] i2c i2c-3: IMX I2C adapter registered <6>[ 0.394730] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.394739] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.394763] PTP clock support registered <6>[ 0.395003] EDAC MC: Ver: 3.0.0 <6>[ 0.398723] vgaarb: loaded <6>[ 1.746402] clocksource: Switched to clocksource arch_sys_counter <6>[ 1.805361] NET: Registered PF_INET protocol family <6>[ 1.805714] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 1.808564] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 1.808605] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 1.808624] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 1.808714] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 1.809112] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 1.809252] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.809339] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.809649] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 1.816705] RPC: Registered named UNIX socket transport module. <6>[ 1.816718] RPC: Registered udp transport module. <6>[ 1.816723] RPC: Registered tcp transport module. <6>[ 1.816729] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.816742] PCI: CLS 0 bytes, default 64 <6>[ 1.817942] Trying to unpack rootfs image as initramfs... <6>[ 2.088493] printk: console [ttymxc0] enabled <6>[ 2.088504] printk: bootconsole [ec_imx6q0] disabled <6>[ 2.088536] printk: console [ttymxc0] printing thread started <6>[ 2.147331] printk: bootconsole [ec_imx6q0] printing thread stopped <6>[ 2.148842] 30a80000.serial: ttymxc5 at MMIO 0x30a80000 (irq = 275, base_baud = 15000000) is a IMX <6>[ 2.150532] msm_serial: driver initialized <6>[ 2.150543] STMicroelectronics ASC driver initialized <6>[ 2.152249] STM32 USART driver initialized <6>[ 2.206843] brd: module loaded <6>[ 2.214014] loop: module loaded <6>[ 2.232033] CAN device driver interface <6>[ 2.233806] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 2.253839] pps pps0: new PPS source ptp0 <3>[ 2.261455] fec 30bf0000.ethernet: Invalid MAC address: 00:00:00:00:00:00 <6>[ 2.261526] fec 30bf0000.ethernet: Using random MAC address: ee:4e:c5:e1:67:70 <6>[ 3.261929] Freeing initrd memory: 16768K <4>[ 3.262559] imx-sdma 30bd0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2 <6>[ 3.262595] imx-sdma 30bd0000.dma-controller: external firmware not found, using ROM firmware <6>[ 4.478829] fec 30bf0000.ethernet eth0: registered PHC device 0 <6>[ 4.480219] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 4.480227] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 4.480307] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 4.480313] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 4.486514] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 4.486582] usbcore: registered new interface driver pegasus <6>[ 4.486650] usbcore: registered new interface driver asix <6>[ 4.486692] usbcore: registered new interface driver ax88179_178a <6>[ 4.486732] usbcore: registered new interface driver cdc_ether <6>[ 4.486798] usbcore: registered new interface driver smsc75xx <6>[ 4.486851] usbcore: registered new interface driver smsc95xx <6>[ 4.486893] usbcore: registered new interface driver net1080 <6>[ 4.486933] usbcore: registered new interface driver cdc_subset <6>[ 4.486973] usbcore: registered new interface driver zaurus <6>[ 4.487060] usbcore: registered new interface driver cdc_ncm <6>[ 4.493389] usbcore: registered new interface driver usb-storage <6>[ 4.501687] i2c_dev: i2c /dev entries driver <3>[ 4.522864] CPUidle arm: CPU 0 failed to init idle CPU ops <6>[ 4.524755] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.524767] sdhci: Copyright(c) Pierre Ossman <6>[ 4.527594] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.529909] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.535502] sdhci-esdhc-imx 30b40000.mmc: Got CD GPIO <6>[ 4.535542] sdhci-esdhc-imx 30b40000.mmc: Got WP GPIO <6>[ 4.632375] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.634777] usbcore: registered new interface driver usbhid <6>[ 4.634789] usbhid: USB HID core driver <6>[ 4.645252] NET: Registered PF_INET6 protocol family <6>[ 4.646996] Segment Routing with IPv6 <6>[ 4.647076] In-situ OAM (IOAM) with IPv6 <6>[ 4.647173] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.648010] NET: Registered PF_PACKET protocol family <6>[ 4.648022] can: controller area network core <6>[ 4.648097] NET: Registered PF_CAN protocol family <6>[ 4.648107] can: raw protocol <6>[ 4.648116] can: broadcast manager protocol <6>[ 4.648129] can: netlink gateway - max_hops=1 <5>[ 4.648709] Key type dns_resolver registered <6>[ 4.648906] ThumbEE CPU extension supported. <5>[ 4.648923] Registering SWP/SWPB emulation handler <5>[ 4.649711] Loading compiled-in X.509 certificates <4>[ 4.707451] imx_usb 30b10000.usb: No over current polarity defined <6>[ 4.742809] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA <6>[ 4.756427] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA <6>[ 4.779817] mmc0: new high speed SDHC card at address e624 <6>[ 4.780682] mmcblk0: mmc0:e624 SA16G 14.8 GiB <6>[ 4.783165] mmcblk0: p1 p2 <4>[ 4.849917] imx_usb 30b20000.usb: No over current polarity defined <6>[ 4.853591] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 4.853629] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 4.876390] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 4.877415] hub 1-0:1.0: USB hub found <6>[ 4.877472] hub 1-0:1.0: 1 port detected <6>[ 4.913416] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 4.977022] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA <3>[ 4.997058] fec 30bf0000.ethernet eth0: Unable to connect to phy <3>[ 4.999743] IP-Config: Failed to open eth0 <3>[ 4.999756] IP-Config: No network devices available <6>[ 5.030436] Freeing unused kernel image (initmem) memory: 2048K <6>[ 5.043055] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: <6>[ 5.168105] mmc1: new ultra high speed SDR104 SDIO card at address 0001 OK Populating /dev using udev: <30>[ 5.211147] udevd[133]: starting version 3.2.9 <5>[ 7.766390] random: crng init done <27>[ 7.776967] udevd[133]: specified user 'tss' unknown <27>[ 7.777155] udevd[133]: specified group 'tss' unknown <30>[ 7.780857] udevd[134]: starting eudev-3.2.9 <6>[ 9.388177] caam 30900000.crypto: Entropy delay = 3200 <6>[ 9.447636] caam 30900000.crypto: Instantiated RNG4 SH0 <6>[ 9.507048] caam 30900000.crypto: Instantiated RNG4 SH1 <6>[ 9.507079] caam 30900000.crypto: device ID = 0x0a16030000000000 (Era 8) <6>[ 9.507092] caam 30900000.crypto: job rings = 3, qi = 0 <5>[ 10.357324] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 10.809340] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 10.809514] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 10.809534] cfg80211: failed to load regulatory.db <6>[ 10.889260] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 <4>[ 10.889603] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.fsl,imx7d-sdb.bin failed with error -2 <4>[ 10.889682] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 <6>[ 11.332448] caam algorithms registered in /proc/crypto <6>[ 11.334232] caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto <6>[ 11.334253] caam 30900000.crypto: registering rng-caam <6>[ 11.334635] caam 30900000.crypto: rng crypto API alg registered prng-caam done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh exp<3>[ 11.937038] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 ort SHELL=/bin/sh / # . /lava-1256169/environment . /lava-1256169/environment / # /lava-1256169/bin/lava-test-runner /lava-1256169/0 /lava-1256169/bin/lava-test-runner /lava-1256169/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1256169/0/tests/0_dmesg + cat uuid + UUID=1256169_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 17.369226] <8>[ 17.408884] <8>[ 17.450469] + set +x / # <8>[ 17.490392] <8>[ 17.491847] # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1256169/environment / # . /lava-1256169/environment/lava-1256169/bin/lava-test-runner /lava-1256169/1 / # /lava-1256169/bin/lava-test-runner /lava-1256169/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1256169/1/tests/1_bootrr + cat uuid + UUID=1256169_1.5.2.4.5 + set<8>[ 23.214015] +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1256169/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 30360000.anatop:tempmon imx_thermal: failed to register cpufreq cooling device 30360000.anatop:regulator-vdd1p0d platform: wait for supplier sw2 30360000.anatop:regulator-vdd1p2 platform: wait for supplier sw2 regulator-lcd-3v3 platform: supplier spi4.0 not ready usbphynop3 backlight platform: supplier 30660000.pwm not ready imx-pgc-domain.0 imx-pgc: Failed to get domain's regulator imx-pgc-domain.1 imx-pgc: Failed to get domain's regulator imx-pgc-domain.2 imx-pgc: Failed to get domain's regulator panel platform: supplier regulator-lcd-3v3 not ready 30be0000.ethernet platform: supplier spi4.0 not ready sound fsl-asoc-card: snd_soc_register_card failed 30730000.lcdif mxsfb: Cannot connect bridge /lava-1256169/1/../bin/lava-test-case <8>[ 24.271916] /lava-1256169/1/../bin/lava-test-case <8>[ 24.314523] /lava-1256169/1/../bin/lava-test-case <8>[ 24.341335] + set +x