[Enter `^Ec?' for help] U-Boot 2015.01-rc3-00172-gd0a58bc (Dec 28 2014 - 23:49:42) for ODROID-XU3 CPU: Exynos5800@800MHz Board: Odroid XU3 based on EXYNOS5422 I2C: ready DRAM: 1.8 GiB trace: copying 000a7308 bytes of early data from 50000000 to aeff0000 trace: enabled MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 ODROID-XU3 # usb start usb start (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found ODROID-XU3 # setenv autoload no setenv autoload no ODROID-XU3 # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.201.15 (5013 ms) ODROID-XU3 # setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 ODROID-XU3 # tftp 0x42000000 12570865/tftp-deploy-9ocx2fsu/kernel/zImage tftp 0x42000000 12570865/tftp-deploy-9ocx2fsu/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.15 Filename '12570865/tftp-deploy-9ocx2fsu/kernel/zImage'. Load address: 0x42000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################### 568.4 KiB/s done Bytes transferred = 7922592 (78e3a0 hex) ODROID-XU3 # tftp 0x43300000 12570865/tftp-deploy-9ocx2fsu/ramdisk/ramdisk.cpio.gz.uboot tftp 0x43300000 12570865/tftp-deploy-9ocx2fsu/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.15 Filename '12570865/tftp-deploy-9ocx2fsu/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x43300000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### 543 KiB/s done Bytes transferred = 10564098 (a13202 hex) ODROID-XU3 # setenv initrd_size ${filesize} setenv initrd_size ${filesize} ODROID-XU3 # tftp 0x43000000 12570865/tftp-deploy-9ocx2fsu/dtb/exynos5422-odroidxu3.dtb tftp 0x43000000 12570865/tftp-deploy-9ocx2fsu/dtb/exynos5422-odroidxu3.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.15 Filename '12570865/tftp-deploy-9ocx2fsu/dtb/exynos5422-odroidxu3.dtb'. Load address: 0x43000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ##### 6.8 KiB/s done Bytes transferred = 66608 (10430 hex) ODROID-XU3 # setenv bootargs 'console=ttySAC2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp' setenv bootargs 'console=ttySAC2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp' ODROID-XU3 # bootz 0x42000000 0x43300000 0x43000000 bootz 0x42000000 0x43300000 0x43000000 Kernel image @ 0x42000000 [ 0x000000 - 0x78e3a0 ] ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 10564034 Bytes = 10.1 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Ramdisk to 4f5ec000, end 4ffff1c2 ... OK Loading Device Tree to 4f5d8000, end 4f5eb42f ... OK Starting kernel ...(fake run for tracing) Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 6.1.72-cip13 (KernelCI@build-j81586-arm-gcc-10-exynos-defconfig-w26rn) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT Thu Jan 18 23:59:14 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU3 [ 0.000000] earlycon: exynos4210 at MMIO 0x12c20000 (options '115200n8') [ 0.000000] printk: bootconsole [exynos4210] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 96 MiB at 0xaa000000 [ 0.000000] Samsung CPU ID: 0xe5422001 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000afffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000afffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000afffffff] [ 0.000000] Running under secure firmware. [ 0.000000] percpu: Embedded 17 pages/cpu s37300 r8192 d24140 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 457216 [ 0.000000] Kernel command line: console=ttySAC2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 1684884K/1835008K available (11264K kernel code, 1522K rwdata, 4156K rodata, 1024K init, 6543K bss, 51820K reserved, 98304K cma-reserved, 950272K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] Running RCU self tests <6>[ 0.000000] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU lockdep checking is enabled. <6>[ 0.000000] Trampoline variant of Tasks RCU enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] GIC: Using split EOI/Deactivate mode <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] Switching to timer-based delay loop, resolution 41ns <6>[ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <4>[ 0.008062] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 <6>[ 0.017527] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.022434] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.033442] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.041669] Ignoring duplicate/late registration of read_current_timer delay <6>[ 0.050643] Console: colour dummy device 80x30 <4>[ 0.053924] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.061947] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.066267] ... MAX_LOCK_DEPTH: 48 <4>[ 0.070642] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 0.075235] ... CLASSHASH_SIZE: 4096 <4>[ 0.079869] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.084507] ... MAX_LOCKDEP_CHAINS: 65536 <4>[ 0.089226] ... CHAINHASH_SIZE: 32768 <4>[ 0.093866] memory used by lock dependency info: 4061 kB <4>[ 0.099539] memory used for stack traces: 2112 kB <4>[ 0.104524] per task-struct memory footprint: 1536 bytes <6>[ 0.110285] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.120776] CPU: Testing write buffer coherency: ok <6>[ 0.125895] pid_max: default: 32768 minimum: 301 <6>[ 0.131507] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.138306] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.152504] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100 <6>[ 0.161374] cblist_init_generic: Setting adjustable number of callback queues. <6>[ 0.167529] cblist_init_generic: Setting shift to 3 and lim to 1. <6>[ 0.174109] Running RCU-tasks wait API self tests <6>[ 0.286139] Setting up static identity map for 0x40100000 - 0x40100060 <6>[ 0.292443] ARM CCI driver probed <6>[ 0.295825] Exynos MCPM support installed <6>[ 0.300234] rcu: Hierarchical SRCU implementation. <6>[ 0.304298] rcu: Max phase no-delay instances is 1000. <6>[ 0.315557] smp: Bringing up secondary CPUs ... <6>[ 0.322579] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101 <6>[ 0.327093] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102 <6>[ 0.330448] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103 <6>[ 0.333915] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.333936] CPU4: detected I-Cache line size mismatch, workaround enabled <3>[ 0.333947] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.372798] CPU4: Spectre BHB: enabling loop workaround for all CPUs <6>[ 0.382740] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.382757] CPU5: detected I-Cache line size mismatch, workaround enabled <3>[ 0.382767] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.407476] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002 <6>[ 0.407494] CPU6: detected I-Cache line size mismatch, workaround enabled <3>[ 0.407504] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.431940] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003 <6>[ 0.431957] CPU7: detected I-Cache line size mismatch, workaround enabled <3>[ 0.431967] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.453779] smp: Brought up 1 node, 8 CPUs <6>[ 0.457626] SMP: Total of 8 processors activated (384.00 BogoMIPS). <6>[ 0.463967] CPU: All CPU(s) started in HYP mode. <6>[ 0.468882] CPU: Virtualization extensions available. <6>[ 0.478284] devtmpfs: initialized <6>[ 0.505996] Callback from call_rcu_tasks() invoked. <6>[ 0.566431] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 <6>[ 0.575497] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.584191] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) <6>[ 0.594092] pinctrl core: initialized pinctrl subsystem <6>[ 0.604290] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.614266] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.628721] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.629492] cpuidle: using governor menu <6>[ 0.639495] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.646778] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.799442] EXYNOS5420 PMU initialized <6>[ 0.988956] iommu: Default domain type: Translated <6>[ 0.992627] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 1.001325] SCSI subsystem initialized <6>[ 1.004768] usbcore: registered new interface driver usbfs <6>[ 1.009834] usbcore: registered new interface driver hub <6>[ 1.015300] usbcore: registered new device driver usb <6>[ 1.022557] s3c-i2c 12c60000.i2c: slave address 0x00 <6>[ 1.026324] s3c-i2c 12c60000.i2c: bus frequency set to 65 KHz <6>[ 1.035429] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter <6>[ 1.040107] s3c-i2c 12c80000.i2c: slave address 0x00 <6>[ 1.044737] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz <6>[ 1.051605] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter <6>[ 1.057394] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.061486] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.070885] PTP clock support registered <6>[ 1.076630] Advanced Linux Sound Architecture Driver Initialized. <6>[ 1.084031] nfc: nfc_init: NFC Core ver 0.1 <6>[ 1.087221] NET: Registered PF_NFC protocol family <6>[ 1.093632] clocksource: Switched to clocksource mct-frc <6>[ 1.139805] NET: Registered PF_INET protocol family <6>[ 1.144168] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 1.154038] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear) <6>[ 1.161691] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 1.169338] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 1.177597] TCP bind hash table entries: 8192 (order: 7, 655360 bytes, linear) <6>[ 1.188449] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 1.194034] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) <6>[ 1.200742] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) <6>[ 1.208485] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 1.215741] RPC: Registered named UNIX socket transport module. <6>[ 1.220510] RPC: Registered udp transport module. <6>[ 1.225512] RPC: Registered tcp transport module. <6>[ 1.230381] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.240119] Trying to unpack rootfs image as initramfs... <6>[ 1.245551] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <6>[ 1.255692] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available <5>[ 1.270275] Initialise system trusted keyrings <6>[ 1.274559] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 1.312005] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 1.319434] NFS: Registering the id_resolver key type <5>[ 1.323396] Key type id_resolver registered <5>[ 1.327792] Key type id_legacy registered <6>[ 1.332348] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 1.339097] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 1.346709] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. <5>[ 1.352903] Key type asymmetric registered <5>[ 1.356095] Asymmetric key parser 'x509' registered <6>[ 1.361791] bounce: pool size: 64 pages <6>[ 1.365650] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 1.372831] io scheduler mq-deadline registered <6>[ 1.377580] io scheduler kyber registered <3>[ 1.384409] samsung-pinctrl 13400000.pinctrl: Failed to create device link (0x180) with soc <4>[ 1.397584] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator <4>[ 1.407334] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator <4>[ 1.414952] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator <4>[ 1.424773] exynos5_usb3drd_phy 12500000.phy: supply vbus not found, using dummy regulator <4>[ 1.432382] exynos5_usb3drd_phy 12500000.phy: supply vbus-boost not found, using dummy regulator <6>[ 1.462331] dma-pl330 3880000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 1.468693] dma-pl330 3880000.dma-controller: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 <6>[ 1.488832] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 1.495249] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 <4>[ 1.504879] dma-pl330 3880000.dma-controller: PM domain MAU will not be powered off <6>[ 1.522991] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 1.529422] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 <6>[ 1.542701] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 1.549141] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 <6>[ 1.821206] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 1.835613] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 124, base_baud = 0) is a S3C6400/10 <6>[ 1.845938] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 125, base_baud = 0) is a S3C6400/10 <6>[ 1.855931] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 126, base_baud = 0) is a S3C6400/10 <6>[ 1.864196] printk: console [ttySAC2] enabled <6>[ 1.864196] printk: console [ttySAC2] enabled <6>[ 1.872869] printk: bootconsole [exynos4210] disabled <6>[ 1.872869] printk: bootconsole [exynos4210] disabled <6>[ 1.885639] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 127, base_baud = 0) is a S3C6400/10 <6>[ 1.898193] exynos-trng 10830600.rng: Exynos True Random Number Generator. <6>[ 1.908224] exynos-mixer 14450000.mixer: Adding to iommu group 0 <6>[ 1.969370] brd: module loaded <6>[ 2.007591] loop: module loaded <6>[ 2.018245] usbcore: registered new device driver r8152-cfgselector <6>[ 2.023463] usbcore: registered new interface driver r8152 <6>[ 2.029233] usbcore: registered new interface driver asix <6>[ 2.034812] usbcore: registered new interface driver ax88179_178a <6>[ 2.041084] usbcore: registered new interface driver cdc_ether <6>[ 2.047267] usbcore: registered new interface driver smsc75xx <6>[ 2.053185] usbcore: registered new interface driver smsc95xx <6>[ 2.059162] usbcore: registered new interface driver net1080 <6>[ 2.065048] usbcore: registered new interface driver cdc_subset <6>[ 2.071149] usbcore: registered new interface driver zaurus <6>[ 2.077085] usbcore: registered new interface driver cdc_ncm <6>[ 2.082850] usbcore: registered new interface driver r8153_ecm <4>[ 2.095249] phy phy-12130000.phy.6: phy_power_on was called before phy_init <6>[ 2.101105] exynos-ehci 12110000.usb: EHCI Host Controller <6>[ 2.107312] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.116550] exynos-ehci 12110000.usb: irq 128, io mem 0x12110000 <6>[ 2.143767] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 <6>[ 2.149887] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 <6>[ 2.157153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 2.164568] usb usb1: Product: EHCI Host Controller <6>[ 2.169635] usb usb1: Manufacturer: Linux 6.1.72-cip13 ehci_hcd <6>[ 2.175830] usb usb1: SerialNumber: 12110000.usb <6>[ 2.184537] hub 1-0:1.0: USB hub found <6>[ 2.187312] hub 1-0:1.0: 3 ports detected <4>[ 2.196890] phy phy-12130000.phy.6: phy_power_on was called before phy_init <6>[ 2.202656] exynos-ohci 12120000.usb: USB Host Controller <6>[ 2.208394] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 <6>[ 2.217017] exynos-ohci 12120000.usb: irq 128, io mem 0x12120000 <6>[ 2.288406] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 <6>[ 2.295550] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 2.302926] usb usb2: Product: USB Host Controller <6>[ 2.307998] usb usb2: Manufacturer: Linux 6.1.72-cip13 ohci_hcd <6>[ 2.314148] usb usb2: SerialNumber: 12120000.usb <6>[ 2.321158] hub 2-0:1.0: USB hub found <6>[ 2.323878] hub 2-0:1.0: 3 ports detected <6>[ 2.332937] usbcore: registered new interface driver uas <6>[ 2.338725] usbcore: registered new interface driver usb-storage <6>[ 2.345707] UDC core: g_ether: couldn't find an available UDC <6>[ 2.358008] i2c_dev: i2c /dev entries driver <6>[ 2.411277] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV <6>[ 2.417440] Freeing initrd memory: 10320K <6>[ 2.437986] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV <6>[ 2.469276] vdd_sd: Bringing 3300000uV into 2800000-2800000uV <6>[ 2.493718] usb 1-1: new high-speed USB device number 2 using exynos-ehci <6>[ 2.605614] s5m-rtc s2mps14-rtc: registered as rtc0 <6>[ 2.611583] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01T00:01:17 UTC (946684877) <4>[ 2.619944] s2mps11-clk s2mps11-clk: DMA mask not set <6>[ 2.647370] ina2xx 0-0040: power monitor ina231 (Rshunt = 10000 uOhm) <6>[ 2.655250] ina2xx 0-0041: power monitor ina231 (Rshunt = 10000 uOhm) <6>[ 2.663053] ina2xx 0-0044: power monitor ina231 (Rshunt = 10000 uOhm) <6>[ 2.670874] ina2xx 0-0045: power monitor ina231 (Rshunt = 10000 uOhm) <6>[ 2.685417] exynos-tmu 10060000.tmu: More trip points than supported by this TMU. <6>[ 2.691692] exynos-tmu 10060000.tmu: 2 trip points should be configured in polling mode. <6>[ 2.695020] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 <6>[ 2.707001] exynos-tmu 10064000.tmu: More trip points than supported by this TMU. <6>[ 2.708505] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 <6>[ 2.716184] exynos-tmu 10064000.tmu: 2 trip points should be configured in polling mode. <6>[ 2.727591] hub 1-1:1.0: USB hub found <6>[ 2.736123] hub 1-1:1.0: 5 ports detected <6>[ 2.738749] exynos-tmu 10068000.tmu: More trip points than supported by this TMU. <6>[ 2.747824] exynos-tmu 10068000.tmu: 2 trip points should be configured in polling mode. <6>[ 2.760248] exynos-tmu 1006c000.tmu: More trip points than supported by this TMU. <6>[ 2.766603] exynos-tmu 1006c000.tmu: 2 trip points should be configured in polling mode. <6>[ 2.778798] exynos-tmu 100a0000.tmu: More trip points than supported by this TMU. <6>[ 2.785148] exynos-tmu 100a0000.tmu: 6 trip points should be configured in polling mode. <6>[ 2.797134] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled <6>[ 2.806623] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com <6>[ 2.858300] cpu cpu0: EM: created perf domain <6>[ 2.875774] cpu cpu4: EM: created perf domain <6>[ 2.891085] sdhci: Secure Digital Host Controller Interface driver <6>[ 2.896240] sdhci: Copyright(c) Pierre Ossman <6>[ 2.901940] Synopsys Designware Multimedia Card Interface Driver <6>[ 2.911153] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.911172] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.924802] dwmmc_exynos 12200000.mmc: Using internal DMA controller. <6>[ 2.930687] dwmmc_exynos 12200000.mmc: Version ID is 250a <6>[ 2.931112] dwmmc_exynos 12220000.mmc: Using internal DMA controller. <6>[ 2.937260] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 139,64 bit host data width,64 deep fifo <6>[ 2.937420] s5p-secss 10830000.sss: s5p-sss driver registered <6>[ 2.942957] dwmmc_exynos 12220000.mmc: Version ID is 250a <6>[ 2.944464] usbcore: registered new interface driver usbhid <6>[ 2.944495] usbhid: USB HID core driver <6>[ 2.959032] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 140,64 bit host data width,64 deep fifo <6>[ 2.984422] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq <6>[ 3.013684] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) <6>[ 3.020023] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) <6>[ 3.060482] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp <6>[ 3.067139] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp <6>[ 3.073543] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp <6>[ 3.079717] usb 1-1.1: new high-speed USB device number 3 using exynos-ehci <6>[ 3.088001] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp <6>[ 3.098110] exynos-ppmu: new PPMU device registered 10d00000.ppmu (ppmu-event3-dmc0-0) <6>[ 3.105968] exynos-ppmu: new PPMU device registered 10d10000.ppmu (ppmu-event3-dmc0-1) <6>[ 3.114102] exynos-ppmu: new PPMU device registered 10d60000.ppmu (ppmu-event3-dmc1-0) <6>[ 3.122238] exynos-ppmu: new PPMU device registered 10d70000.ppmu (ppmu-event3-dmc1-1) <3>[ 3.141551] exynos5-dmc 10c20000.memory-controller: error -ENXIO: IRQ drex_0 not found <3>[ 3.148450] exynos5-dmc 10c20000.memory-controller: error -ENXIO: IRQ drex_1 not found <6>[ 3.158306] exynos5-dmc 10c20000.memory-controller: DMC initialized, in irq mode: 0 <4>[ 3.187290] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s <6>[ 3.207074] NET: Registered PF_INET6 protocol family <6>[ 3.218984] Segment Routing with IPv6 <6>[ 3.221527] In-situ OAM (IOAM) with IPv6 <6>[ 3.225818] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.234618] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 <6>[ 3.234832] NET: Registered PF_PACKET protocol family <6>[ 3.241760] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 <6>[ 3.247170] NET: Registered PF_KEY protocol family <5>[ 3.259955] Key type dns_resolver registered <5>[ 3.265321] Registering SWP/SWPB emulation handler <6>[ 3.265959] smsc95xx v2.0.0 <5>[ 3.282365] Loading compiled-in X.509 certificates <6>[ 3.499367] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=143) <6>[ 3.513261] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-12110000.usb-1.1, smsc95xx USB 2.0 Ethernet, 0e:23:73:d8:9b:85 <6>[ 3.608918] exynos-chipid 10000000.chipid: cpu0 opp0, freq: 1500 missing <6>[ 3.615186] exynos-chipid 10000000.chipid: cpu4 opp0, freq: 2100 missing <6>[ 3.621858] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5800] PRO_ID[0xe5422000] REV[0x1] Detected <3>[ 3.638573] OF: graph: no port node found in /soc/hdmi@14530000 <6>[ 3.651298] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations <6>[ 3.659093] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) <6>[ 3.666588] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) <6>[ 3.677573] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes <6>[ 3.684036] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes <6>[ 3.697289] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0 <6>[ 3.705083] panfrost 11800000.gpu: clock rate = 400000000 <6>[ 3.738042] panfrost 11800000.gpu: mali-t620 id 0x620 major 0x0 minor 0x1 status 0x0 <6>[ 3.745218] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,21eee400 <6>[ 3.753127] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 <6>[ 3.765171] panfrost 11800000.gpu: shader_present=0x3f l2_present=0x11 <6>[ 3.772574] panfrost 11800000.gpu: using only 1st core group (4 cores from 6) <6>[ 3.813481] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 1 <6>[ 3.906932] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller <6>[ 3.911587] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3 <6>[ 3.921439] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 <6>[ 3.930512] xhci-hcd xhci-hcd.8.auto: irq 149, io mem 0x12000000 <6>[ 3.938191] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller <6>[ 3.942611] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4 <6>[ 3.950607] xhci-hcd xhci-hcd.8.auto: Host supports USB 3.0 SuperSpeed <6>[ 3.958562] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 <6>[ 3.966109] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.973247] usb usb3: Product: xHCI Host Controller <6>[ 3.978388] usb usb3: Manufacturer: Linux 6.1.72-cip13 xhci-hcd <6>[ 3.984615] usb usb3: SerialNumber: xhci-hcd.8.auto <6>[ 3.997438] hub 3-0:1.0: USB hub found <6>[ 4.000382] hub 3-0:1.0: 1 port detected <6>[ 4.007405] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. <6>[ 4.009186] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 4.015533] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 <6>[ 4.025681] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) <6>[ 4.032750] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.032772] usb usb4: Product: xHCI Host Controller <6>[ 4.054860] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 4.056306] usb usb4: Manufacturer: Linux 6.1.72-cip13 xhci-hcd <6>[ 4.070970] mmc_host mmc0: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1) <6>[ 4.071750] usb usb4: SerialNumber: xhci-hcd.8.auto <6>[ 4.088651] mmc0: new HS400 MMC card at address 0001 <6>[ 4.093527] hub 4-0:1.0: USB hub found <6>[ 4.096644] hub 4-0:1.0: 1 port detected <6>[ 4.103432] mmcblk0: mmc0:0001 SDW32G 29.1 GiB <6>[ 4.122114] dwc3 12400000.usb: changing max_speed on rev 5533200a <6>[ 4.165753] mmcblk0: p1 p2 <6>[ 4.179782] mmcblk0boot0: mmc0:0001 SDW32G 4.00 MiB <6>[ 4.194180] mmcblk0boot1: mmc0:0001 SDW32G 4.00 MiB <4>[ 4.194192] using random self ethernet address <4>[ 4.202665] using random host ethernet address <6>[ 4.209085] mmcblk0rpmb: mmc0:0001 SDW32G 4.00 MiB, chardev (245:0) <6>[ 4.214286] usb0: HOST MAC 92:67:d0:27:0d:e3 <6>[ 4.218796] usb0: MAC 22:8e:a5:51:43:69 <4>[ 4.223527] using random self ethernet address <4>[ 4.228292] using random host ethernet address <6>[ 4.233131] g_ether gadget.0: Ethernet Gadget, version: Memorial Day 2008 <6>[ 4.239357] g_ether gadget.0: g_ether ready <6>[ 4.259189] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling <6>[ 4.265303] s3c-rtc 101e0000.rtc: registered as rtc1 <6>[ 4.279214] exynos-bus: new bus device registered: soc:bus-wcore ( 88700 KHz ~ 532000 KHz) <6>[ 4.290182] exynos-bus: new bus device registered: soc:bus-noc ( 66600 KHz ~ 111000 KHz) <6>[ 4.300388] exynos-bus: new bus device registered: soc:bus-fsys-apb (111000 KHz ~ 222000 KHz) <6>[ 4.311437] exynos-bus: new bus device registered: soc:bus-fsys2 ( 75000 KHz ~ 200000 KHz) <6>[ 4.323409] exynos-bus: new bus device registered: soc:bus-mfc ( 83250 KHz ~ 333000 KHz) <6>[ 4.335315] exynos-bus: new bus device registered: soc:bus-gen ( 88700 KHz ~ 266000 KHz) <6>[ 4.345940] exynos-bus: new bus device registered: soc:bus-peri ( 66600 KHz ~ 66600 KHz) <6>[ 4.357915] exynos-bus: new bus device registered: soc:bus-g2d ( 83250 KHz ~ 333000 KHz) <6>[ 4.369080] exynos-bus: new bus device registered: soc:bus-g2d-acp ( 66500 KHz ~ 266000 KHz) <6>[ 4.380491] exynos-bus: new bus device registered: soc:bus-jpeg ( 75000 KHz ~ 300000 KHz) <6>[ 4.391807] exynos-bus: new bus device registered: soc:bus-jpeg-apb ( 83250 KHz ~ 166500 KHz) <6>[ 4.402250] exynos-bus: new bus device registered: soc:bus-disp1-fimd (120000 KHz ~ 200000 KHz) <6>[ 4.413536] exynos-bus: new bus device registered: soc:bus-disp1 (120000 KHz ~ 300000 KHz) <6>[ 4.424608] exynos-bus: new bus device registered: soc:bus-gscl-scaler (150000 KHz ~ 300000 KHz) <6>[ 4.437353] exynos-bus: new bus device registered: soc:bus-mscl ( 84000 KHz ~ 666000 KHz) <6>[ 4.495269] max98090 5-0010: MAX98090 REVID=0x43 <6>[ 4.502250] max98090 5-0010: use default 2.8v micbias <6>[ 4.560349] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 4.623675] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 4.636977] smsc95xx 1-1.1:1.0 eth0: Link is Down <6>[ 5.002134] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 5.012952] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 5.053963] Sending DHCP requests .., OK <6>[ 10.906747] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.105 <6>[ 10.914943] IP-Config: Complete: <6>[ 10.918306] device=eth0, hwaddr=0e:23:73:d8:9b:85, ipaddr=192.168.201.105, mask=255.255.255.0, gw=192.168.201.1 <6>[ 10.929118] host=192.168.201.105, domain=lava-rack, nis-domain=(none) <6>[ 10.936217] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 10.936240] nameserver0=192.168.201.1 <6>[ 10.970378] ALSA device list: <6>[ 10.972175] #0: Odroid-XU3 <6>[ 10.981527] Freeing unused kernel image (initmem) memory: 1024K <6>[ 11.005166] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 11.595975] udevd[150]: starting version 3.2.9 <5>[ 13.004225] random: crng init done <27>[ 13.024237] udevd[150]: specified user 'tss' unknown <27>[ 13.028414] udevd[150]: specified group 'tss' unknown <30>[ 13.108283] udevd[151]: starting eudev-3.2.9 <6>[ 14.076995] mc: Linux media interface: v0.10 <6>[ 14.109786] videodev: Linux video capture interface: v2.00 <6>[ 14.154209] s5p-mfc 11000000.codec: Adding to iommu group 1 <6>[ 14.167228] s5p-jpeg 11f50000.jpeg: Adding to iommu group 2 <6>[ 14.176661] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video0 <6>[ 14.186050] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video1 <6>[ 14.191875] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers <6>[ 14.191983] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec <4>[ 14.202519] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2 <6>[ 14.215239] s5p-jpeg 11f60000.jpeg: Adding to iommu group 3 <3>[ 14.216123] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel <6>[ 14.245975] s5p-mfc 11000000.codec: decoder registered as /dev/video2 <6>[ 14.254290] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video3 <6>[ 14.260896] s5p-mfc 11000000.codec: encoder registered as /dev/video4 <6>[ 14.269024] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video5 <6>[ 14.275113] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec <6>[ 14.388588] exynos-gsc 13e00000.video-scaler: Adding to iommu group 4 <6>[ 14.400788] exynos-gsc 13e10000.video-scaler: Adding to iommu group 5 <4>[ 14.789781] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2 <3>[ 14.798121] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel <4>[ 14.824351] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2 <3>[ 14.831867] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bi / # . /lava-12570865/environment . /lava-12570865/environment / # /lava-12570865/bin/lava-test-runner /lava-12570865/0 /lava-12570865/bin/lava-test-runner /lava-12570865/0 /lava-12570865/0/../bin/lava-test-shell: line 11: /bi: not found / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-12570865/environment / # . /lava-12570865/environment/lava-12570865/bin/lava-test-runner /lava-12570865/1 / # /lava-12570865/bin/lava-test-runner /lava-12570865/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-12570865/1/tests/1_bootrr + cat uuid + UUID=12570865_1.<8>[ 17.415504] 5.2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-12570865/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-12570865/1/../bin/lava-test-case <8>[ 17.670185] /lava-12570865/1/../bin/lava-test-case <8>[ 17.873340] /lava-12570865/1/../bin/lava-test-case <8>[ 17.939849] + set +x <8>[ 18.006296] / #