connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1023633/tftp-deploy-st2k3h6p/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1023633/tftp-deploy-st2k3h6p/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1023633/tftp-deploy-st2k3h6p/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1023633/tftp-deploy-st2k3h6p/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1023633/tftp-deploy-st2k3h6p/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1023633/tftp-deploy-st2k3h6p/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 5a:f7:52:7b:39:b9 T eth0: DHCP client bound to address 10.8.254.76 Loading ARM Linux zImage '/mnt/tftp/1023633/tftp-deploy-st2k3h6p/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x1322e000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1023633/tftp-deploy-st2k3h6p/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x190613ac Loading devicetree from '/mnt/tftp/1023633/tftp-deploy-st2k3h6p/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x1322e000, initrd at 0x18000000, oftree at 0x19062000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.75-cip14-rt8 (KernelCI@build-j97506-arm-gcc-10-multi-v7-defconfig-ptb48) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Sun Feb 4 04:06:20 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1969712K/2097152K available (14336K kernel code, 2470K rwdata, 6208K rodata, 2048K init, 427K bss, 61904K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000000] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000019] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.004123] Console: colour dummy device 80x30 [ 0.004178] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.004195] CPU: Testing write buffer coherency: ok [ 0.004235] CPU0: Spectre v2: using BPIALL workaround [ 0.004245] pid_max: default: 32768 minimum: 301 [ 0.004429] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004456] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005449] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006401] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.008133] rcu: Hierarchical SRCU implementation. [ 0.008138] rcu: Max phase no-delay instances is 1000. [ 0.011880] EFI services will not be available. [ 0.012254] smp: Bringing up secondary CPUs ... [ 0.013114] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.013131] CPU1: Spectre v2: using BPIALL workaround [ 0.014078] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.014092] CPU2: Spectre v2: using BPIALL workaround [ 0.015015] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.015030] CPU3: Spectre v2: using BPIALL workaround [ 0.015132] smp: Brought up 1 node, 4 CPUs [ 0.015144] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.015154] CPU: All CPU(s) started in SVC mode. [ 0.015817] devtmpfs: initialized [ 0.023493] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.023726] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.023749] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.027091] pinctrl core: initialized pinctrl subsystem [ 0.030852] DMI not present or invalid. [ 0.031652] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.034742] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.037489] thermal_sys: Registered thermal governor 'step_wise' [ 0.037555] cpuidle: using governor menu [ 0.037780] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.044813] platform soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 [ 0.060408] platform 20e0000.pinctrl: Fixed dependency cycle(s) with /soc/bus@2000000/pinctrl@20e0000/imx6qdl-wandboard/hoggrp [ 0.066515] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu2_csi1_mux/port@0/endpoint [ 0.066568] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux/port@0/endpoint [ 0.069014] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@1/endpoint [ 0.069057] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@0/endpoint [ 0.069155] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2100000/mipi@21dc000/port@2/endpoint [ 0.069212] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux/port@2/endpoint [ 0.070681] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@3/endpoint [ 0.070807] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@2/endpoint [ 0.070885] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu2_csi1_mux/port@2/endpoint [ 0.070966] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/bus@2100000/mipi@21dc000/port@3/endpoint [ 0.076511] No ATAGs? [ 0.076674] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.076686] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.080047] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.088230] Serial: AMBA PL011 UART driver [ 0.125996] iommu: Default domain type: Translated [ 0.126007] iommu: DMA domain TLB invalidation policy: strict mode [ 0.126811] SCSI subsystem initialized [ 0.127332] usbcore: registered new interface driver usbfs [ 0.127379] usbcore: registered new interface driver hub [ 0.127420] usbcore: registered new device driver usb [ 0.127662] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 0.127823] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 0.127982] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 0.128108] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 0.129805] i2c i2c-0: IMX I2C adapter registered [ 0.131202] i2c 1-003c: Fixed dependency cycle(s) with /soc/bus@2100000/mipi@21dc000/port@0/endpoint [ 0.131633] i2c i2c-1: IMX I2C adapter registered [ 0.132746] i2c i2c-2: IMX I2C adapter registered [ 0.134225] pps_core: LinuxPPS API ver. 1 registered [ 0.134232] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.134252] PTP clock support registered [ 0.134505] EDAC MC: Ver: 3.0.0 [ 0.138127] vgaarb: loaded [ 0.138584] clocksource: Switched to clocksource mxc_timer1 [ 0.149347] NET: Registered PF_INET protocol family [ 0.149718] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.151615] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.151644] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.151664] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.151746] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.152000] TCP: Hash tables configured (established 8192 bind 8192) [ 0.152162] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.152205] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.152392] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.153015] RPC: Registered named UNIX socket transport module. [ 0.153023] RPC: Registered udp transport module. [ 0.153027] RPC: Registered tcp transport module. [ 0.153031] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.153042] PCI: CLS 0 bytes, default 64 [ 0.153642] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 0.153840] Trying to unpack rootfs image as initramfs... [ 0.162095] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.164156] Initialise system trusted keyrings [ 0.164456] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.170681] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.171504] NFS: Registering the id_resolver key type [ 0.171546] Key type id_resolver registered [ 0.171551] Key type id_legacy registered [ 0.171645] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.171654] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.171692] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.172202] Key type asymmetric registered [ 0.172211] Asymmetric key parser 'x509' registered [ 0.172377] bounce: pool size: 64 pages [ 0.172495] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.172504] io scheduler mq-deadline registered [ 0.172511] io scheduler kyber registered [ 0.230234] mxs-dma 110000.dma-apbh: initialized [ 0.312178] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 0.317534] SuperH (H)SCI(F) driver initialized [ 0.318654] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 269, base_baud = 5000000) is a IMX [ 0.319781] printk: console [ttymxc0] enabled [ 0.319784] printk: console [ttymxc0] printing thread started [ 0.320909] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 270, base_baud = 5000000) is a IMX [ 0.322351] msm_serial: driver initialized [ 0.322358] STMicroelectronics ASC driver initialized [ 0.324112] STM32 USART driver initialized [ 0.348478] brd: module loaded [ 0.356163] loop: module loaded [ 0.360438] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 0.360456] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 0.360465] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 0.360473] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 0.360557] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 0.360733] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 0.360801] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 0.363754] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 0.363785] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.363801] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 1.380722] scsi host0: ahci-imx [ 1.381108] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 271 [ 1.395010] CAN device driver interface [ 1.396844] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.400844] pps pps0: new PPS source ptp0 [ 1.671176] Freeing initrd memory: 16776K [ 1.671519] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.671553] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware [ 1.704807] fec 2188000.ethernet eth0: registered PHC device 0 [ 1.706357] e1000e: Intel(R) PRO/1000 Network Driver [ 1.706362] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.706428] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.706433] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.713137] pegasus: Pegasus/Pegasus II USB Ethernet driver [ 1.713186] usbcore: registered new interface driver pegasus [ 1.713242] usbcore: registered new interface driver asix [ 1.713277] usbcore: registered new interface driver ax88179_178a [ 1.713312] usbcore: registered new interface driver cdc_ether [ 1.713355] usbcore: registered new interface driver smsc75xx [ 1.713399] usbcore: registered new interface driver smsc95xx [ 1.713433] usbcore: registered new interface driver net1080 [ 1.713474] usbcore: registered new interface driver cdc_subset [ 1.713506] usbcore: registered new interface driver zaurus [ 1.713575] usbcore: registered new interface driver cdc_ncm [ 1.720338] usbcore: registered new interface driver usb-storage [ 1.729086] i2c_dev: i2c /dev entries driver [ 1.740451] ata1: SATA link down (SStatus 0 SControl 300) [ 1.740507] ahci-imx 2200000.sata: no device found, disabling link. [ 1.740515] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 1.753079] sdhci: Secure Digital Host Controller Interface driver [ 1.753086] sdhci: Copyright(c) Pierre Ossman [ 1.756006] Synopsys Designware Multimedia Card Interface Driver [ 1.758563] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.764314] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 1.764553] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 1.860565] ledtrig-cpu: registered to indicate activity on CPUs [ 1.862910] usbcore: registered new interface driver usbhid [ 1.862919] usbhid: USB HID core driver [ 1.873037] NET: Registered PF_INET6 protocol family [ 1.879762] Segment Routing with IPv6 [ 1.879821] In-situ OAM (IOAM) with IPv6 [ 1.879910] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.880575] NET: Registered PF_PACKET protocol family [ 1.880584] can: controller area network core [ 1.880656] NET: Registered PF_CAN protocol family [ 1.880665] can: raw protocol [ 1.880673] can: broadcast manager protocol [ 1.880683] can: netlink gateway - max_hops=1 [ 1.881039] Key type dns_resolver registered [ 1.886201] ThumbEE CPU extension supported. [ 1.886217] Registering SWP/SWPB emulation handler [ 1.889402] Loading compiled-in X.509 certificates [ 1.892449] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 1.956898] imx_usb 2184200.usb: No over current polarity defined [ 1.960514] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.960539] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.988874] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 1.988941] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 1.998674] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.000401] hub 1-0:1.0: USB hub found [ 2.000599] hub 1-0:1.0: 1 port detected [ 2.020610] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 2.026908] Freeing unused kernel image (initmem) memory: 2048K [ 2.032038] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.034117] mmc0: new high speed SDHC card at address 1234 [ 2.035084] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 2.063582] sdhci-esdhc-imx 2194000.mmc: card claims to support voltages below defined range [ 2.063606] sdhci-esdhc-imx 2194000.mmc: exceeding card's volts [ 2.069326] mmc1: error -110 whilst initialising SDIO card [ 2.109610] Run /init as init process [ 2.145231] mmc2: new DDR MMC card at address 0001 [ 2.146580] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 2.150002] mmcblk2: p1 p2 [ 2.151444] mmcblk2boot0: mmc2:0001 S10004 4.00 MiB [ 2.154742] mmcblk2boot1: mmc2:0001 S10004 4.00 MiB [ 2.157213] mmcblk2rpmb: mmc2:0001 S10004 4.00 MiB, chardev (236:0) Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 2.254455] udevd[125]: starting version 3.2.9 [ 2.288559] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 2.501784] hub 1-1:1.0: USB hub found [ 2.503010] hub 1-1:1.0: 4 ports detected [ 7.368540] random: crng init done [ 7.376182] udevd[125]: specified user 'tss' unknown [ 7.376297] udevd[125]: specified group 'tss' unknown [ 7.379527] udevd[126]: starting eudev-3.2.9 [ 7.390914] usbcore: registered new device driver onboard-usb-hub [ 7.611038] hub 1-1:1.0: USB hub found [ 7.612087] hub 1-1:1.0: 4 ports detected [ 7.624963] hub 1-1:1.0: USB hub found [ 7.625946] hub 1-1:1.0: 4 ports detected [ 7.811556] imx-ipuv3 2400000.ipu: IPUv3H probed [ 7.814066] imx-ipuv3 2800000.ipu: IPUv3H probed [ 7.883865] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 7.937840] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 7.938638] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 7.939501] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 7.939640] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 7.969111] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 7.969200] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 7.969215] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 7.969706] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 8.039819] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) [ 8.039976] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) [ 8.040152] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) [ 8.040275] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) [ 8.040349] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 8.040841] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 8.040937] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 8.042091] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 8.212903] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 8.336801] caam 2100000.crypto: Entropy delay = 3200 [ 8.397607] caam 2100000.crypto: Instantiated RNG4 SH0 [ 8.458367] caam 2100000.crypto: Instantiated RNG4 SH1 [ 8.458388] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 8.458399] caam 2100000.crypto: job rings = 2, qi = 0 [ 8.494271] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 8.506745] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 8.571618] fsl-asoc-card sound: ASoC: driver name too long 'imx6-wandboard-sgtl5000' -> 'imx6-wandboard-' [ 8.881432] caam algorithms registered in /proc/crypto [ 8.882707] caam 2100000.crypto: registering rng-caam done[ 8.883012] caam 2100000.crypto: rng crypto API alg registered prng-caam Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1023633/environment . /lava-1023633/environment / # /lava-1023633/bin/lava-test-runner /lava-1023633/0 /lava-1023633/bin/lava-test-runner /lava-1023633/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1023633/0/tests/0_dmesg + cat uuid + UUID=1023633_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 9.638879] [ 9.682222] [ 9.724557] + set +x [ 9.764854] / # [ 9.766225] #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-1023633/environment / # . /lava-1023633/environment/lava-1023633/bin/lava-test-runner /lava-1023633/1 / # /lava-1023633/bin/lava-test-runner /lava-1023633/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1023633/1/tests/1_bootrr + cat uuid + UUID=1023633_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr[ 10.263997] /libexec/bootrr/helpers:/lava-1023633/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1023633/1/../bin/lava-test-case [ 10.319388] /lava-1023633/1/../bin/lava-test-case [ 10.356666] /lava-1023633/1/../bin/lava-test-case [ 10.377741] + set +x