connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1023751/tftp-deploy-vl8ugtpy/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1023751/tftp-deploy-vl8ugtpy/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1023751/tftp-deploy-vl8ugtpy/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1023751/tftp-deploy-vl8ugtpy/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1023751/tftp-deploy-vl8ugtpy/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1023751/tftp-deploy-vl8ugtpy/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 86:2f:0e:96:76:9f T eth0: DHCP client bound to address 10.8.254.205 Loading ARM Linux zImage '/mnt/tftp/1023751/tftp-deploy-vl8ugtpy/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x13943000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1023751/tftp-deploy-vl8ugtpy/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x189fcce7 Loading devicetree from '/mnt/tftp/1023751/tftp-deploy-vl8ugtpy/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x13943000, initrd at 0x18000000, oftree at 0x189fd000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.75-cip14 (KernelCI@build-j98557-arm-gcc-10-imx-v6-v7-defconfig-zj5tk) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 5 12:22:26 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 17 pages/cpu s38452 r8192 d22988 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1971284K/2097152K available (15360K kernel code, 2193K rwdata, 5440K rodata, 1024K init, 6675K bss, 60332K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000025] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002075] Console: colour dummy device 80x30 [ 0.002153] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002164] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002174] ... MAX_LOCK_DEPTH: 48 [ 0.002187] ... MAX_LOCKDEP_KEYS: 8192 [ 0.002197] ... CLASSHASH_SIZE: 4096 [ 0.002207] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002217] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002227] ... CHAINHASH_SIZE: 32768 [ 0.002237] memory used by lock dependency info: 4061 kB [ 0.002248] memory used for stack traces: 2112 kB [ 0.002260] per task-struct memory footprint: 1536 bytes [ 0.002367] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002397] CPU: Testing write buffer coherency: ok [ 0.002561] CPU0: Spectre v2: using BPIALL workaround [ 0.002578] pid_max: default: 32768 minimum: 301 [ 0.003194] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003229] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.008554] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.011977] cblist_init_generic: Setting adjustable number of callback queues. [ 0.011993] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.012343] Running RCU-tasks wait API self tests [ 0.012659] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.013276] Callback from call_rcu_tasks_trace() invoked. [ 0.013522] rcu: Hierarchical SRCU implementation. [ 0.013536] rcu: Max phase no-delay instances is 1000. [ 0.016324] smp: Bringing up secondary CPUs ... [ 0.019576] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.019598] CPU1: Spectre v2: using BPIALL workaround [ 0.022998] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.023019] CPU2: Spectre v2: using BPIALL workaround [ 0.025674] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.025694] CPU3: Spectre v2: using BPIALL workaround [ 0.026114] smp: Brought up 1 node, 4 CPUs [ 0.026136] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.026154] CPU: All CPU(s) started in SVC mode. [ 0.029012] devtmpfs: initialized [ 0.066064] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.068345] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.068415] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.072681] pinctrl core: initialized pinctrl subsystem [ 0.078868] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.102246] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.107194] thermal_sys: Registered thermal governor 'step_wise' [ 0.107533] cpuidle: using governor menu [ 0.107768] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.125897] platform soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 [ 0.165257] platform 20e0000.pinctrl: Fixed dependency cycle(s) with /soc/bus@2000000/pinctrl@20e0000/imx6qdl-wandboard/hoggrp [ 0.179749] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu2_csi1_mux/port@0/endpoint [ 0.179929] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux/port@0/endpoint [ 0.185100] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@1/endpoint [ 0.185227] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@0/endpoint [ 0.185402] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2100000/mipi@21dc000/port@2/endpoint [ 0.185567] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux/port@2/endpoint [ 0.188938] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@3/endpoint [ 0.189368] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@2/endpoint [ 0.189713] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu2_csi1_mux/port@2/endpoint [ 0.190027] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/bus@2100000/mipi@21dc000/port@3/endpoint [ 0.200659] No ATAGs? [ 0.201176] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.201225] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.206366] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.254710] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.322571] SCSI subsystem initialized [ 0.324391] usbcore: registered new interface driver usbfs [ 0.324629] usbcore: registered new interface driver hub [ 0.324792] usbcore: registered new device driver usb [ 0.325180] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 0.325992] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 0.326465] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 0.327103] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 0.331307] i2c i2c-0: IMX I2C adapter registered [ 0.335899] i2c 1-003c: Fixed dependency cycle(s) with /soc/bus@2100000/mipi@21dc000/port@0/endpoint [ 0.337384] i2c i2c-1: IMX I2C adapter registered [ 0.344126] i2c i2c-2: IMX I2C adapter registered [ 0.344705] mc: Linux media interface: v0.10 [ 0.344941] videodev: Linux video capture interface: v2.00 [ 0.345503] pps_core: LinuxPPS API ver. 1 registered [ 0.345518] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.345577] PTP clock support registered [ 0.348138] Advanced Linux Sound Architecture Driver Initialized. [ 0.353726] Bluetooth: Core ver 2.22 [ 0.353857] NET: Registered PF_BLUETOOTH protocol family [ 0.353872] Bluetooth: HCI device and connection manager initialized [ 0.353986] Bluetooth: HCI socket layer initialized [ 0.354015] Bluetooth: L2CAP socket layer initialized [ 0.354175] Bluetooth: SCO socket layer initialized [ 0.356843] vgaarb: loaded [ 0.361528] clocksource: Switched to clocksource mxc_timer1 [ 0.364387] VFS: Disk quotas dquot_6.6.0 [ 0.364544] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.397942] NET: Registered PF_INET protocol family [ 0.398922] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.402139] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear) [ 0.402249] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.402713] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.403038] TCP bind hash table entries: 8192 (order: 7, 655360 bytes, linear) [ 0.405282] TCP: Hash tables configured (established 8192 bind 8192) [ 0.405936] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 0.406147] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 0.406802] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.409058] RPC: Registered named UNIX socket transport module. [ 0.409106] RPC: Registered udp transport module. [ 0.409121] RPC: Registered tcp transport module. [ 0.409134] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.410866] PCI: CLS 0 bytes, default 64 [ 0.412565] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 0.413993] Trying to unpack rootfs image as initramfs... [ 0.433248] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.440385] Initialise system trusted keyrings [ 0.441328] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.465946] NFS: Registering the id_resolver key type [ 0.466129] Key type id_resolver registered [ 0.466174] Key type id_legacy registered [ 0.466534] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.466642] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.466824] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.468175] fuse: init (API version 7.37) [ 0.563228] Key type asymmetric registered [ 0.563405] Asymmetric key parser 'x509' registered [ 0.564177] bounce: pool size: 64 pages [ 0.564599] io scheduler mq-deadline registered [ 0.564622] io scheduler kyber registered [ 0.587850] mxs-dma 110000.dma-apbh: initialized [ 0.603488] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 0.604447] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 0.604467] pfuze100-regulator 2-0008: pfuze100 found. [ 0.639644] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 268, base_baud = 5000000) is a IMX [ 1.696958] printk: console [ttymxc0] enabled [ 1.707766] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 269, base_baud = 5000000) is a IMX [ 1.718305] Freeing initrd memory: 10228K [ 1.732152] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 1.769122] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 1.775838] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 1.782374] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 1.788086] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 1.796060] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 1.802369] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 1.808503] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 1.817921] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 1.837004] imx-ipuv3 2400000.ipu: IPUv3H probed [ 1.847104] Stack Depot allocating hash table of 65536 entries with kvcalloc [ 1.859481] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 1.867511] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 1.875690] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 1.883656] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 1.892285] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 1.903298] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 1.913517] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 1.922298] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 1.929380] imx-ipuv3 2800000.ipu: IPUv3H probed [ 1.970058] brd: module loaded [ 2.003346] loop: module loaded [ 2.009286] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.017495] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.025610] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.033889] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.042070] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 2.050311] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 2.058474] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 2.069727] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.076820] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.085694] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.099583] scsi host0: ahci-imx [ 2.104682] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 282 [ 2.125829] CAN device driver interface [ 2.137799] pps pps0: new PPS source ptp0 [ 2.188055] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.196366] usbcore: registered new device driver r8152-cfgselector [ 2.202866] usbcore: registered new interface driver r8152 [ 2.208493] usbcore: registered new interface driver lan78xx [ 2.214366] usbcore: registered new interface driver asix [ 2.219908] usbcore: registered new interface driver ax88179_178a [ 2.226196] usbcore: registered new interface driver cdc_ether [ 2.232242] usbcore: registered new interface driver smsc95xx [ 2.238113] usbcore: registered new interface driver net1080 [ 2.243937] usbcore: registered new interface driver cdc_subset [ 2.249975] usbcore: registered new interface driver zaurus [ 2.255733] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 2.263377] usbcore: registered new interface driver cdc_ncm [ 2.269165] usbcore: registered new interface driver r8153_ecm [ 2.275331] usbcore: registered new interface driver usb-storage [ 2.290684] SPI driver ads7846 has no spi_device_id for ti,tsc2046 [ 2.296972] SPI driver ads7846 has no spi_device_id for ti,ads7843 [ 2.303231] SPI driver ads7846 has no spi_device_id for ti,ads7845 [ 2.309434] SPI driver ads7846 has no spi_device_id for ti,ads7873 [ 2.327722] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 2.334133] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 2.343756] i2c_dev: i2c /dev entries driver [ 2.363225] Bluetooth: HCI UART driver ver 2.3 [ 2.367705] Bluetooth: HCI UART protocol H4 registered [ 2.373002] Bluetooth: HCI UART protocol LL registered [ 2.381688] sdhci: Secure Digital Host Controller Interface driver [ 2.387891] sdhci: Copyright(c) Pierre Ossman [ 2.392332] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.401786] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 2.401787] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 2.415012] caam 2100000.crypto: Entropy delay = 3200 [ 2.445034] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 2.451021] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 2.452122] ata1: SATA link down (SStatus 0 SControl 300) [ 2.460145] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 2.464984] ahci-imx 2200000.sata: no device found, disabling link. [ 2.477635] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 2.480903] caam 2100000.crypto: Instantiated RNG4 SH0 [ 2.541666] caam 2100000.crypto: Instantiated RNG4 SH1 [ 2.547158] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 2.553939] caam 2100000.crypto: job rings = 2, qi = 0 [ 2.571076] caam algorithms registered in /proc/crypto [ 2.576784] caam 2100000.crypto: registering rng-caam [ 2.603805] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.614411] mmc0: new high speed SDHC card at address 1234 [ 2.624682] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 2.667861] mmc2: new DDR MMC card at address 0001 [ 2.674900] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 2.686451] mmcblk2: p1 p2 [ 2.692725] mmcblk2boot0: mmc2:0001 S10004 4.00 MiB [ 2.704541] mmcblk2boot1: mmc2:0001 S10004 4.00 MiB [ 2.716317] mmcblk2rpmb: mmc2:0001 S10004 4.00 MiB, chardev (243:0) [ 2.724321] random: crng init done [ 2.724896] caam 2100000.crypto: rng crypto API alg registered prng-caam [ 2.739731] usbcore: registered new interface driver usbhid [ 2.745417] usbhid: USB HID core driver [ 2.753969] imx-ipuv3-csi imx-ipuv3-csi.0: Registered ipu1_csi0 capture as /dev/video0 [ 2.763674] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpenc capture as /dev/video1 [ 2.772499] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpvf capture as /dev/video2 [ 2.781286] imx-ipuv3-csi imx-ipuv3-csi.1: Registered ipu1_csi1 capture as /dev/video3 [ 2.790390] imx-ipuv3-csi imx-ipuv3-csi.4: Registered ipu2_csi0 capture as /dev/video4 [ 2.799092] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpenc capture as /dev/video5 [ 2.807502] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpvf capture as /dev/video6 [ 2.816256] imx-ipuv3-csi imx-ipuv3-csi.5: Registered ipu2_csi1 capture as /dev/video7 [ 2.825452] imx6-mipi-csi2 21dc000.mipi: Consider updating driver imx6-mipi-csi2 to match on endpoints [ 2.857719] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 2.868273] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 2.924983] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 2.944219] NET: Registered PF_INET6 protocol family [ 2.954607] Segment Routing with IPv6 [ 2.958352] In-situ OAM (IOAM) with IPv6 [ 2.962623] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.971166] NET: Registered PF_PACKET protocol family [ 2.976401] can: controller area network core [ 2.981000] NET: Registered PF_CAN protocol family [ 2.985882] can: raw protocol [ 2.989023] can: broadcast manager protocol [ 2.993318] can: netlink gateway - max_hops=1 [ 2.998189] Key type dns_resolver registered [ 3.017535] Registering SWP/SWPB emulation handler [ 3.023343] Loading compiled-in X.509 certificates [ 3.206954] imx_usb 2184200.usb: No over current polarity defined [ 3.217962] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 3.223510] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 3.261935] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 3.271565] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.280227] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.287695] usb usb1: Product: EHCI Host Controller [ 3.292734] usb usb1: Manufacturer: Linux 6.1.75-cip14 ehci_hcd [ 3.298715] usb usb1: SerialNumber: ci_hdrc.1 [ 3.309502] hub 1-0:1.0: USB hub found [ 3.313675] hub 1-0:1.0: 1 port detected [ 3.323201] video-mux 20e0000.iomuxc-gpr:ipu1_csi0_mux: Consider updating driver video-mux to match on endpoints [ 3.336384] video-mux 20e0000.iomuxc-gpr:ipu2_csi1_mux: Consider updating driver video-mux to match on endpoints [ 3.351700] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 3.367414] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.384574] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.399630] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.468866] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.477640] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 3.488010] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.495521] ALSA device list: [ 3.496863] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 3.499943] No soundcards found. [ 3.515474] Freeing unused kernel image (initmem) memory: 1024K [ 3.572886] Run /init as init process [ 3.631624] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: OK Running sysctl: [ 3.883328] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.01 [ 3.892284] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.899487] usb 1-1: Product: USB2.0 Hub [ 3.903521] usb 1-1: Manufacturer: GenesysLogic [ 3.914485] hub 1-1:1.0: USB hub found OK [ 3.924613] hub 1-1:1.0: 4 ports detected Populating /dev using udev: [ 3.942760] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.960030] udevd[217]: starting version 3.2.9 [ 3.979428] udevd[217]: specified user 'tss' unknown [ 3.984761] udevd[217]: specified group 'tss' unknown [ 3.997860] udevd[218]: starting eudev-3.2.9 [ 4.592098] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.646057] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.672454] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 4.680991] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6q.bin [ 4.729523] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.849678] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 4.860390] imx-sdma 20ec000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 4.931820] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.985768] ov5645 1-003c: ov5645_write_reg: write reg error -6: reg=3103, val=11 [ 4.993699] ov5645 1-003c: could not set init registers [ 5.001663] ov5645 1-003c: could not power up OV5645 [ 5.026030] fsl-asoc-card sound: ASoC: driver name too long 'imx6-wandboard-sgtl5000' -> 'imx6-wandboard-' done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1023751/environment . /lava-1023751/environment / # /lava-1023751/bin/lava-test-runner /lava-1023751/0 /lava-1023751/bin/lava-test-runner /lava-1023751/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1023751/0/tests/0_dmesg + cat uuid + UUID=1023751_1.5.2.3.1[ 6.435291] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.553480] [ 6.658943] [ 6.759240] + set +x [ 6.770618] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1023751/environment / # . /lava-1023751/environment/lava-1023751/bin/lava-test-runner /lava-1023751/1 / # /lava-1023751/bin/lava-test-runner /lava-1023751/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1023751/1/tests/1_bootrr + cat uuid + UUID=1023751_1.5.2.3.5[ 7.383923] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1023751/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1023751/1/../bin/lava-test-case [ 7.541649] /lava-1023751/1/../bin/lava-test-case [ 7.652254] /lava-1023751/1/../bin/lava-test-case [ 7.712550] + set +x [ 7.754196] / #