connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1031496/tftp-deploy-hclwprj_/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1031496/tftp-deploy-hclwprj_/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1031496/tftp-deploy-hclwprj_/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1031496/tftp-deploy-hclwprj_/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1031496/tftp-deploy-hclwprj_/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1031496/tftp-deploy-hclwprj_/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address b2:77:ee:04:a8:bc T eth0: DHCP client bound to address 10.8.254.136 Loading ARM Linux zImage '/mnt/tftp/1031496/tftp-deploy-hclwprj_/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x1394d000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1031496/tftp-deploy-hclwprj_/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x189fcbd7 Loading devicetree from '/mnt/tftp/1031496/tftp-deploy-hclwprj_/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x1394d000, initrd at 0x18000000, oftree at 0x189fd000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.80-cip15 (KernelCI@build-j128541-arm-gcc-10-imx-v6-v7-defconfig-dqrrz) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Sat Mar 2 21:58:35 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 18 pages/cpu s41524 r8192 d24012 u73728 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1971268K/2097152K available (15360K kernel code, 2193K rwdata, 5440K rodata, 1024K init, 6675K bss, 60348K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000025] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002061] Console: colour dummy device 80x30 [ 0.002140] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002151] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002160] ... MAX_LOCK_DEPTH: 48 [ 0.002171] ... MAX_LOCKDEP_KEYS: 8192 [ 0.002180] ... CLASSHASH_SIZE: 4096 [ 0.002190] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002199] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002210] ... CHAINHASH_SIZE: 32768 [ 0.002220] memory used by lock dependency info: 4061 kB [ 0.002230] memory used for stack traces: 2112 kB [ 0.002241] per task-struct memory footprint: 1536 bytes [ 0.002345] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002375] CPU: Testing write buffer coherency: ok [ 0.002543] CPU0: Spectre v2: using BPIALL workaround [ 0.002561] pid_max: default: 32768 minimum: 301 [ 0.003188] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003226] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.008638] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.012077] cblist_init_generic: Setting adjustable number of callback queues. [ 0.012094] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.012450] Running RCU-tasks wait API self tests [ 0.012784] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.013417] Callback from call_rcu_tasks_trace() invoked. [ 0.013669] rcu: Hierarchical SRCU implementation. [ 0.013682] rcu: Max phase no-delay instances is 1000. [ 0.016452] smp: Bringing up secondary CPUs ... [ 0.019672] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.019697] CPU1: Spectre v2: using BPIALL workaround [ 0.023152] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.023176] CPU2: Spectre v2: using BPIALL workaround [ 0.025852] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.025873] CPU3: Spectre v2: using BPIALL workaround [ 0.026311] smp: Brought up 1 node, 4 CPUs [ 0.026333] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.026350] CPU: All CPU(s) started in SVC mode. [ 0.029235] devtmpfs: initialized [ 0.065384] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.067685] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.067759] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.071896] pinctrl core: initialized pinctrl subsystem [ 0.078184] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.101877] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.106901] thermal_sys: Registered thermal governor 'step_wise' [ 0.107241] cpuidle: using governor menu [ 0.107461] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.124715] platform soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 [ 0.161186] platform 20dc000.gpc: Fixed dependency cycle(s) with /soc/bus@2000000/clock-controller@20c4000 [ 0.164299] platform 20e0000.pinctrl: Fixed dependency cycle(s) with /soc/bus@2000000/pinctrl@20e0000/imx6qdl-wandboard/hoggrp [ 0.197450] No ATAGs? [ 0.197970] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.198022] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.203382] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.252372] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.322964] SCSI subsystem initialized [ 0.324806] usbcore: registered new interface driver usbfs [ 0.325036] usbcore: registered new interface driver hub [ 0.325194] usbcore: registered new device driver usb [ 0.325590] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 0.326405] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 0.326887] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 0.327535] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 0.331813] i2c i2c-0: IMX I2C adapter registered [ 0.336870] i2c i2c-1: IMX I2C adapter registered [ 0.343099] i2c i2c-2: IMX I2C adapter registered [ 0.343708] mc: Linux media interface: v0.10 [ 0.343948] videodev: Linux video capture interface: v2.00 [ 0.344524] pps_core: LinuxPPS API ver. 1 registered [ 0.344540] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.344596] PTP clock support registered [ 0.348470] Advanced Linux Sound Architecture Driver Initialized. [ 0.353242] Bluetooth: Core ver 2.22 [ 0.353366] NET: Registered PF_BLUETOOTH protocol family [ 0.353379] Bluetooth: HCI device and connection manager initialized [ 0.353493] Bluetooth: HCI socket layer initialized [ 0.353524] Bluetooth: L2CAP socket layer initialized [ 0.353682] Bluetooth: SCO socket layer initialized [ 0.357537] vgaarb: loaded [ 0.365659] clocksource: Switched to clocksource mxc_timer1 [ 0.368534] VFS: Disk quotas dquot_6.6.0 [ 0.368698] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.401817] NET: Registered PF_INET protocol family [ 0.402789] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.406690] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear) [ 0.406811] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.406854] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.407180] TCP bind hash table entries: 8192 (order: 7, 655360 bytes, linear) [ 0.409416] TCP: Hash tables configured (established 8192 bind 8192) [ 0.410085] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 0.410296] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 0.410956] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.413157] RPC: Registered named UNIX socket transport module. [ 0.413207] RPC: Registered udp transport module. [ 0.413221] RPC: Registered tcp transport module. [ 0.413234] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.414927] PCI: CLS 0 bytes, default 64 [ 0.416871] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 0.418113] Trying to unpack rootfs image as initramfs... [ 0.435384] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.442371] Initialise system trusted keyrings [ 0.443352] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.468745] NFS: Registering the id_resolver key type [ 0.469018] Key type id_resolver registered [ 0.469064] Key type id_legacy registered [ 0.469393] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.469502] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.469688] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.471047] fuse: init (API version 7.37) [ 0.566911] Key type asymmetric registered [ 0.567095] Asymmetric key parser 'x509' registered [ 0.567830] bounce: pool size: 64 pages [ 0.568254] io scheduler mq-deadline registered [ 0.568276] io scheduler kyber registered [ 0.597454] mxs-dma 110000.dma-apbh: initialized [ 0.613193] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 0.614224] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 0.614244] pfuze100-regulator 2-0008: pfuze100 found. [ 0.651406] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 268, base_baud = 5000000) is a IMX [ 1.603005] printk: console [ttymxc0] enabled [ 1.612140] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 269, base_baud = 5000000) is a IMX [ 1.637187] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 1.675898] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 1.682648] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 1.689355] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 1.695082] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 1.703440] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 1.709863] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 1.716158] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 1.726795] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 1.736600] Freeing initrd memory: 10228K [ 1.746667] imx-ipuv3 2400000.ipu: IPUv3H probed [ 1.755877] Stack Depot allocating hash table of 65536 entries with kvcalloc [ 1.768340] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 1.776416] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 1.784502] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 1.792481] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 1.801143] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 1.812244] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 1.822624] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 1.831479] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 1.838679] imx-ipuv3 2800000.ipu: IPUv3H probed [ 1.879338] brd: module loaded [ 1.913413] loop: module loaded [ 1.919464] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 1.927476] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 1.935565] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 1.943770] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 1.951793] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 1.959823] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 1.967488] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 1.978797] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 1.985904] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.994721] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.008942] scsi host0: ahci-imx [ 2.013925] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 282 [ 2.035350] CAN device driver interface [ 2.047512] pps pps0: new PPS source ptp0 [ 2.097984] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.106371] usbcore: registered new device driver r8152-cfgselector [ 2.112847] usbcore: registered new interface driver r8152 [ 2.118540] usbcore: registered new interface driver lan78xx [ 2.124366] usbcore: registered new interface driver asix [ 2.129946] usbcore: registered new interface driver ax88179_178a [ 2.136235] usbcore: registered new interface driver cdc_ether [ 2.142237] usbcore: registered new interface driver smsc95xx [ 2.148170] usbcore: registered new interface driver net1080 [ 2.153957] usbcore: registered new interface driver cdc_subset [ 2.160062] usbcore: registered new interface driver zaurus [ 2.165810] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 2.173412] usbcore: registered new interface driver cdc_ncm [ 2.179247] usbcore: registered new interface driver r8153_ecm [ 2.185382] usbcore: registered new interface driver usb-storage [ 2.200902] SPI driver ads7846 has no spi_device_id for ti,tsc2046 [ 2.207189] SPI driver ads7846 has no spi_device_id for ti,ads7843 [ 2.213391] SPI driver ads7846 has no spi_device_id for ti,ads7845 [ 2.219640] SPI driver ads7846 has no spi_device_id for ti,ads7873 [ 2.238127] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 2.244445] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 2.254086] i2c_dev: i2c /dev entries driver [ 2.274081] Bluetooth: HCI UART driver ver 2.3 [ 2.278636] Bluetooth: HCI UART protocol H4 registered [ 2.283880] Bluetooth: HCI UART protocol LL registered [ 2.292580] sdhci: Secure Digital Host Controller Interface driver [ 2.298835] sdhci: Copyright(c) Pierre Ossman [ 2.303215] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.312544] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 2.312568] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 2.321075] caam 2100000.crypto: Entropy delay = 3200 [ 2.348454] ata1: SATA link down (SStatus 0 SControl 300) [ 2.354289] ahci-imx 2200000.sata: no device found, disabling link. [ 2.360649] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 2.360712] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 2.362952] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 2.381335] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 2.388671] caam 2100000.crypto: Instantiated RNG4 SH0 [ 2.449435] caam 2100000.crypto: Instantiated RNG4 SH1 [ 2.454941] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 2.461720] caam 2100000.crypto: job rings = 2, qi = 0 [ 2.479187] caam algorithms registered in /proc/crypto [ 2.484856] caam 2100000.crypto: registering rng-caam [ 2.513974] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.524588] mmc0: new high speed SDHC card at address 1234 [ 2.534306] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 2.571613] caam 2100000.crypto: rng crypto API alg registered prng-caam [ 2.576086] mmc2: new DDR MMC card at address 0001 [ 2.586068] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 2.587613] usbcore: registered new interface driver usbhid [ 2.596296] usbhid: USB HID core driver [ 2.598019] mmcblk2: p1 p2 [ 2.605405] imx-ipuv3-csi imx-ipuv3-csi.0: Registered ipu1_csi0 capture as /dev/video0 [ 2.607248] mmcblk2boot0: mmc2:0001 S10004 4.00 MiB [ 2.618839] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpenc capture as /dev/video1 [ 2.625405] mmcblk2boot1: mmc2:0001 S10004 4.00 MiB [ 2.631908] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpvf capture as /dev/video2 [ 2.632126] random: crng init done [ 2.638989] mmcblk2rpmb: mmc2:0001 S10004 4.00 MiB, chardev (243:0) [ 2.640931] imx-ipuv3-csi imx-ipuv3-csi.1: Registered ipu1_csi1 capture as /dev/video3 [ 2.658470] imx-ipuv3-csi imx-ipuv3-csi.4: Registered ipu2_csi0 capture as /dev/video4 [ 2.667223] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpenc capture as /dev/video5 [ 2.675637] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpvf capture as /dev/video6 [ 2.684395] imx-ipuv3-csi imx-ipuv3-csi.5: Registered ipu2_csi1 capture as /dev/video7 [ 2.693702] imx6-mipi-csi2 21dc000.mipi: Consider updating driver imx6-mipi-csi2 to match on endpoints [ 2.724349] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 2.735321] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 2.792508] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 2.811955] NET: Registered PF_INET6 protocol family [ 2.821952] Segment Routing with IPv6 [ 2.825790] In-situ OAM (IOAM) with IPv6 [ 2.829879] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.838749] NET: Registered PF_PACKET protocol family [ 2.843831] can: controller area network core [ 2.848485] NET: Registered PF_CAN protocol family [ 2.853310] can: raw protocol [ 2.856504] can: broadcast manager protocol [ 2.860763] can: netlink gateway - max_hops=1 [ 2.865711] Key type dns_resolver registered [ 2.884976] Registering SWP/SWPB emulation handler [ 2.890816] Loading compiled-in X.509 certificates [ 3.072975] imx_usb 2184200.usb: No over current polarity defined [ 3.085035] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 3.090558] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 3.126082] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 3.135922] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.144586] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.152056] usb usb1: Product: EHCI Host Controller [ 3.157103] usb usb1: Manufacturer: Linux 6.1.80-cip15 ehci_hcd [ 3.163082] usb usb1: SerialNumber: ci_hdrc.1 [ 3.173800] hub 1-0:1.0: USB hub found [ 3.177963] hub 1-0:1.0: 1 port detected [ 3.187627] video-mux 20e0000.iomuxc-gpr:ipu1_csi0_mux: Consider updating driver video-mux to match on endpoints [ 3.199470] video-mux 20e0000.iomuxc-gpr:ipu2_csi1_mux: Consider updating driver video-mux to match on endpoints [ 3.215289] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 3.231160] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.248139] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.263145] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.326022] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.334726] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 3.347370] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.359684] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 3.369584] ALSA device list: [ 3.373494] No soundcards found. [ 3.380869] Freeing unused kernel image (initmem) memory: 1024K [ 3.457180] Run /init as init process [ 3.465949] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK [ 3.707466] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.01 [ 3.716032] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Starting klogd: [ 3.723212] usb 1-1: Product: USB2.0 Hub [ 3.728674] usb 1-1: Manufacturer: GenesysLogic [ 3.738235] hub 1-1:1.0: USB hub found [ 3.742705] hub 1-1:1.0: 4 ports detected OK [ 3.762851] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW Running sysctl: [ 3.784273] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW OK Populating /dev using udev: [ 3.853512] udevd[217]: starting version 3.2.9 [ 3.872909] udevd[217]: specified user 'tss' unknown [ 3.878500] udevd[217]: specified group 'tss' unknown [ 3.891843] udevd[218]: starting eudev-3.2.9 [ 4.545939] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.671732] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 4.680334] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6q.bin [ 4.707448] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.858236] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 4.869043] imx-sdma 20ec000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 4.920794] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.929299] ov5645 1-003c: ov5645_write_reg: write reg error -6: reg=3103, val=11 [ 4.937433] ov5645 1-003c: could not set init registers [ 4.961550] ov5645 1-003c: could not power up OV5645 [ 5.017353] fsl-asoc-card sound: ASoC: driver name too long 'imx6-wandboard-sgtl5000' -> 'imx6-wandboard-' done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1031496/environment . /lava-1031496/environment / # /lava-1031496/bin/lava-test-runner /lava-1031496/0 /lava-1031496/bin/lava-test-runner /lava-1031496/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1031496/0/tests/0_dmesg + cat uuid + UUID=1031496_1.5.2.3.1[ 6.383789] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.499324] [ 6.604428] [ 6.708473] + set +x [ 6.719574] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1031496/environment / # . /lava-1031496/environment/lava-1031496/bin/lava-test-runner /lava-1031496/1 / # /lava-1031496/bin/lava-test-runner /lava-1031496/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1031496/1/tests/1_bootrr + cat uuid + UUID=1031496_1.5.2.3.5[ 7.330212] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1031496/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1031496/1/../bin/lava-test-case [ 7.487679] /lava-1031496/1/../bin/lava-test-case [ 7.593542] /lava-1031496/1/../bin/lava-test-case [ 7.650350] + set +x [ 7.692039] / #