Trying 192.168.56.175... Connected to arpeggi. Escape character is '^]'. ser2net port telnet,3001 device serialdev, /dev/serial/by-path/platform-1c1c000.usb-usb-0:1:1.3-port0, 115200n81, local=false [,115200N81] (Debian GNU/Linux)  U-Boot SPL 2022.04-6.3.0+git.c71ae7141f30 (May 15 2023 - 16:20:01 +0000) DDRINFO: start DRAM init DDRINFO: DRAM rate 4000MTS Training FAILED DDRINFO: start DRAM init DDRINFO: DRAM rate 4000MTS DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done DDR configured as single rank SEC0: RNG instantiated Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Boot Stage: Primary boot Find img info 0x&4802d800, size 888 Download 916480, Total size 917440 NOTICE: BL31: v2.6(release):lf_v2.6-g3c1583ba0a NOTICE: BL31: Built : 11:00:38, Nov 21 2022 U-Boot 2022.04-6.3.0+git.c71ae7141f30 (May 15 2023 - 16:20:01 +0000) CPU: i.MX8MP[8] rev1.1 1600 MHz (running at 1200 MHz) CPU: Industrial temperature grade (-40C to 105C) at 33C Reset cause: POR DRAM: 4 GiB Core: 89 devices, 23 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@30880000 Out: serial@30880000 Err: serial@30880000 Model: Toradex 0063 Verdin iMX8M Plus Quad 4GB IT V1.1A Serial#: 15034401 Carrier: Toradex Dahlia V1.1C, Serial# 11080179 SEC0: RNG instantiated BuildInfo: - ATF 3c1583b Net: eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Normal Boot Hit any key to stop autoboot: 1  0 Verdin iMX8MPsetenv autoload no # setenv autoload no Verdin iMX8MP # dhcp dhcp ethernet@30bf0000 Waiting for PHY auto negotiation to complete...... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 *** Unhandled DHCP Option in OFFER/ACK: 42 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.56.51 (3832 ms) Verdin iMX8MP # setenv serverip 192.168.56.193 setenv serverip 192.168.56.193 Verdin iMX8MP # tftp 0x40400000 654721/tftp-deploy-pl1_km5p/kernel/Image tftp 0x40400000 654721/tftp-deploy-pl1_km5p/kernel/Image Using ethernet@30bf0000 device TFTP from server 192.168.56.193; our IP address is 192.168.56.51 Filename '654721/tftp-deploy-pl1_km5p/kernel/Image'. Load address: 0x40400000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################ 37.6 MiB/s done Bytes transferred = 37902848 (2425a00 hex) Verdin iMX8MP # tftp 0x43800000 654721/tftp-deploy-pl1_km5p/ramdisk/ramdisk.cpio.gz.uboot tftp 0x43800000 654721/tftp-deploy-pl1_km5p/ramdisk/ramdisk.cpio.gz.uboot Using ethernet@30bf0000 device TFTP from server 192.168.56.193; our IP address is 192.168.56.51 Filename '654721/tftp-deploy-pl1_km5p/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x43800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################ 39.1 MiB/s done Bytes transferred = 18593188 (11bb5a4 hex) Verdin iMX8MP # setenv initrd_size ${filesize} setenv initrd_size ${filesize} Verdin iMX8MP # tftp 0x43000000 654721/tftp-deploy-pl1_km5p/dtb/imx8mp-verdin-nonwifi-dahlia.dtb tftp 0x43000000 654721/tftp-deploy-pl1_km5p/dtb/imx8mp-verdin-nonwifi-dahlia.dtb Using ethernet@30bf0000 device TFTP from server 192.168.56.193; our IP address is 192.168.56.51 Filename '654721/tftp-deploy-pl1_km5p/dtb/imx8mp-verdin-nonwifi-dahlia.dtb'. Load address: 0x43000000 Loading: *## 14.2 MiB/s done Bytes transferred = 44674 (ae82 hex) Verdin iMX8MP # setenv bootargs 'console=ttymxc2,115200 earlycon,115200n8 root=/dev/nfs rw nfsroot=192.168.56.193:/var/lib/lava/dispatcher/tmp/654721/extract-nfsrootfs-k9y1m0v8,tcp,hard,v3 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc2,115200 earlycon,115200n8 root=/dev/nfs rw nfsroot=192.168.56.193:/var/lib/lava/dispatcher/tmp/654721/extract-nfsrootfs-k9y1m0v8,tcp,hard,v3 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' Verdin iMX8MP # booti 0x40400000 0x43800000 0x43000000 booti 0x40400000 0x43800000 0x43000000 ## Loading init Ramdisk from Legacy Image at 43800000 ... Image Name: Image Type: AArch64 Linux RAMDisk Image (uncompressed) Data Size: 18593124 Bytes = 17.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 00000000ffaf5000, end 00000000ffb02e81 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.1.80-cip15 (KernelCI@build-j128579-arm64-gcc-10-defconfig-gj494) (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT Sat Mar 2 22:20:55 UTC 2024 [ 0.000000] Machine model: Toradex Verdin iMX8M Plus on Dahlia Board [ 0.000000] efi: UEFI not found. [ 0.000000] earlycon: ec_imx6q0 at MMIO 0x0000000030880000 (options '') [ 0.000000] printk: bootconsole [ec_imx6q0] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x13f7d1a00-0x13f7d3fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000923fffff] [ 0.000000] node 0: [mem 0x0000000092400000-0x00000000943fffff] [ 0.000000] node 0: [mem 0x0000000094400000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] cma: Reserved 32 MiB at 0x00000000fda00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 21 pages/cpu s47912 r8192 d29912 u86016 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=ttymxc2,115200 earlycon,115200n8 root=/dev/nfs rw nfsroot=192.168.56.193:/var/lib/lava/dispatcher/tmp/654721/extract-nfsrootfs-k9y1m0v8,tcp,hard,v3 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <5>[ 0.000000] Unknown kernel command line parameters \"earlycon,115200n8\", will be passed to user space. <6>[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] software IO TLB: area num 4. <6>[ 0.000000] software IO TLB: mapped [mem 0x00000000f9a00000-0x00000000fda00000] (64MB) <6>[ 0.000000] Memory: 3926164K/4194304K available (16192K kernel code, 3734K rwdata, 9340K rodata, 7616K init, 609K bss, 235372K reserved, 32768K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. <6>[ 0.000000] Trampoline variant of Tasks RCU enabled. <6>[ 0.000000] Tracing variant of Tasks RCU enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 <6>[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode <6>[ 0.000000] GICv3: 160 SPIs implemented <6>[ 0.000000] GICv3: 0 Extended SPIs implemented <6>[ 0.000000] Root IRQ handler: gic_handle_irq <6>[ 0.000000] GICv3: GICv3 features: 16 PPIs <6>[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000 <4>[ 0.000000] ITS: No ITS available, not enabling LPIs <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns <6>[ 0.000000] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns <6>[ 0.009639] Console: colour dummy device 80x25 <6>[ 0.013101] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000) <6>[ 0.023632] pid_max: default: 32768 minimum: 301 <6>[ 0.028581] LSM: Security Framework initializing <6>[ 0.033504] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.041140] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.050531] cblist_init_generic: Setting adjustable number of callback queues. <6>[ 0.056813] cblist_init_generic: Setting shift to 2 and lim to 1. <6>[ 0.063236] cblist_init_generic: Setting adjustable number of callback queues. <6>[ 0.070717] cblist_init_generic: Setting shift to 2 and lim to 1. <6>[ 0.077244] rcu: Hierarchical SRCU implementation. <6>[ 0.082179] rcu: Max phase no-delay instances is 1000. <6>[ 0.090151] EFI services will not be available. <6>[ 0.092691] smp: Bringing up secondary CPUs ... <6>[ 0.097729] Detected VIPT I-cache on CPU1 <6>[ 0.097796] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000 <6>[ 0.097830] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] <6>[ 0.098306] Detected VIPT I-cache on CPU2 <6>[ 0.098361] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000 <6>[ 0.098380] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] <6>[ 0.098817] Detected VIPT I-cache on CPU3 <6>[ 0.098881] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000 <6>[ 0.098900] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] <6>[ 0.098958] smp: Brought up 1 node, 4 CPUs <6>[ 0.156554] SMP: Total of 4 processors activated. <6>[ 0.161528] CPU features: detected: 32-bit EL0 Support <6>[ 0.166972] CPU features: detected: 32-bit EL1 Support <6>[ 0.172383] CPU features: detected: CRC32 instructions <6>[ 0.177868] CPU: All CPU(s) started at EL2 <6>[ 0.182193] alternatives: applying system-wide alternatives <6>[ 0.190021] devtmpfs: initialized <6>[ 0.199950] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns <6>[ 0.207183] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.215421] pinctrl core: initialized pinctrl subsystem <6>[ 0.222490] DMI not present or invalid. <6>[ 0.224600] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.231132] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.237793] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.245813] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.253854] audit: initializing netlink subsys (disabled) <5>[ 0.259600] audit: type=2000 audit(0.164:1): state=initialized audit_enabled=0 res=1 <6>[ 0.260811] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.267548] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.273892] cpuidle: using governor menu <6>[ 0.285096] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. <6>[ 0.292027] ASID allocator initialised with 65536 entries <6>[ 0.299522] Serial: AMBA PL011 UART driver <6>[ 0.307371] platform soc@0: Fixed dependency cycle(s) with /soc@0/bus@30000000/efuse@30350000/unique-id@8 <6>[ 0.317163] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/hdmihoggrp <6>[ 0.325361] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpiohog3grp <6>[ 0.336377] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpiohog2grp <6>[ 0.347400] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpiohog1grp <6>[ 0.358425] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpio8grp <6>[ 0.369187] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpio7grp <6>[ 0.379948] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpio4grp <6>[ 0.390714] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpio3grp <6>[ 0.401477] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpio2grp <6>[ 0.412235] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpio1grp <6>[ 0.423589] imx8mp-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver <6>[ 0.431228] platform 30350000.efuse: Fixed dependency cycle(s) with /soc@0/bus@30000000/clock-controller@30380000 <6>[ 0.442497] platform 30350000.efuse: Fixed dependency cycle(s) with /soc@0/bus@30000000/clock-controller@30380000 <4>[ 0.467882] KASLR disabled due to lack of seed <6>[ 0.479035] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.483276] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.489845] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages <6>[ 0.496918] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page <6>[ 0.503480] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.510564] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.517130] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages <6>[ 0.524213] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page <6>[ 0.532267] ACPI: Interpreter disabled. <6>[ 0.537870] iommu: Default domain type: Translated <6>[ 0.540217] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.546968] SCSI subsystem initialized <6>[ 0.551078] usbcore: registered new interface driver usbfs <6>[ 0.556571] usbcore: registered new interface driver hub <6>[ 0.562157] usbcore: registered new device driver usb <6>[ 0.568663] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.572723] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.582185] PTP clock support registered <6>[ 0.586499] EDAC MC: Ver: 3.0.0 <6>[ 0.591344] FPGA manager framework <6>[ 0.593533] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.600600] vgaarb: loaded <6>[ 0.603111] clocksource: Switched to clocksource arch_sys_counter <5>[ 0.609387] VFS: Disk quotas dquot_6.6.0 <6>[ 0.613448] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 0.620739] pnp: PnP ACPI: disabled <6>[ 0.630569] NET: Registered PF_INET protocol family <6>[ 0.633057] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.643397] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) <6>[ 0.649478] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.657473] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) <6>[ 0.665894] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) <6>[ 0.674244] TCP: Hash tables configured (established 32768 bind 32768) <6>[ 0.680347] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) <6>[ 0.687303] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) <6>[ 0.694859] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.700947] RPC: Registered named UNIX socket transport module. <6>[ 0.706821] RPC: Registered udp transport module. <6>[ 0.711801] RPC: Registered tcp transport module. <6>[ 0.716785] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.723528] PCI: CLS 0 bytes, default 64 <6>[ 0.727908] Unpacking initramfs... <6>[ 0.739633] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available <6>[ 0.745873] kvm [1]: IPA Size Limit: 40 bits <6>[ 0.751586] kvm [1]: GICv3: no GICV resource entry <6>[ 0.754890] kvm [1]: disabling GICv2 emulation <6>[ 0.759640] kvm [1]: GIC system register CPU interface enabled <6>[ 0.765890] kvm [1]: vgic interrupt IRQ9 <6>[ 0.770087] kvm [1]: Hyp mode initialized successfully <5>[ 0.776649] Initialise system trusted keyrings <6>[ 0.780342] workingset: timestamp_bits=42 max_order=20 bucket_order=0 <6>[ 0.793304] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.797260] NFS: Registering the id_resolver key type <5>[ 0.801983] Key type id_resolver registered <5>[ 0.806391] Key type id_legacy registered <6>[ 0.810782] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.817672] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 0.825580] 9p: Installing v9fs 9p2000 file system support <5>[ 0.866029] Key type asymmetric registered <5>[ 0.867559] Asymmetric key parser 'x509' registered <6>[ 0.872820] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) <6>[ 0.880429] io scheduler mq-deadline registered <6>[ 0.885234] io scheduler kyber registered <6>[ 0.904027] EINJ: ACPI disabled. <6>[ 0.940045] SoC: i.MX8MP revision 1.1 <6>[ 0.953522] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 0.960685] SuperH (H)SCI(F) driver initialized <6>[ 0.963512] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 16, base_baud = 1500000) is a IMX <6>[ 0.972407] 30880000.serial: ttymxc2 at MMIO 0x30880000 (irq = 17, base_baud = 1500000) is a IMX <6>[ 0.980913] printk: console [ttymxc2] enabled <6>[ 0.980913] printk: console [ttymxc2] enabled <6>[ 0.990082] printk: bootconsole [ec_imx6q0] disabled <6>[ 0.990082] printk: bootconsole [ec_imx6q0] disabled <6>[ 1.001230] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 18, base_baud = 1500000) is a IMX <6>[ 1.013415] msm_serial: driver initialized <6>[ 1.025126] loop: module loaded <6>[ 1.029934] megasas: 07.719.03.00-rc1 <6>[ 1.042399] tun: Universal TUN/TAP device driver, 1.6 <6>[ 1.049139] thunder_xcv, ver 1.0 <6>[ 1.052726] thunder_bgx, ver 1.0 <6>[ 1.056297] nicpf, ver 1.0 <6>[ 1.061271] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version <6>[ 1.068779] hns3: Copyright (c) 2017 Huawei Corporation. <6>[ 1.074472] hclge is initializing <6>[ 1.078125] e1000: Intel(R) PRO/1000 Network Driver <6>[ 1.083293] e1000: Copyright (c) 1999-2006 Intel Corporation. <6>[ 1.089407] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.094662] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.100925] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.106612] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.112520] igbvf: Intel(R) Gigabit Virtual Function Network Driver <6>[ 1.119076] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. <6>[ 1.125996] sky2: driver version 1.30 <6>[ 1.131806] VFIO - User Level meta-driver version: 0.3 <6>[ 1.142011] usbcore: registered new interface driver usb-storage <6>[ 1.152524] i2c_dev: i2c /dev entries driver <6>[ 1.167294] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.173765] sdhci: Copyright(c) Pierre Ossman <6>[ 1.179860] Synopsys Designware Multimedia Card Interface Driver <6>[ 1.187873] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.197372] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.205608] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... <6>[ 1.213713] usbcore: registered new interface driver usbhid <6>[ 1.219571] usbhid: USB HID core driver <6>[ 1.226670] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA <6>[ 1.229572] platform soc@0: Fixed dependency cycle(s) with /soc@0/bus@30000000/efuse@30350000 <6>[ 1.247836] NET: Registered PF_PACKET protocol family <6>[ 1.253330] 9pnet: Installing 9P2000 support <5>[ 1.257971] Key type dns_resolver registered <6>[ 1.262934] registered taskstats version 1 <5>[ 1.267348] Loading compiled-in X.509 certificates <6>[ 1.286424] mmc2: new HS400 Enhanced strobe MMC card at address 0001 <6>[ 1.294168] mmcblk2: mmc2:0001 IX2932 29.1 GiB <6>[ 1.298374] gpio-125 (CTRL_SLEEP_MOCI#): hogged as output/high <6>[ 1.300534] mmcblk2: p1 p2 <6>[ 1.308704] mmcblk2boot0: mmc2:0001 IX2932 4.00 MiB <6>[ 1.315006] mmcblk2boot1: mmc2:0001 IX2932 4.00 MiB <6>[ 1.321226] mmcblk2rpmb: mmc2:0001 IX2932 4.00 MiB, chardev (234:0) <6>[ 1.322045] nxp-pca9450 0-0025: pca9450bc probed. <6>[ 1.333498] i2c i2c-0: IMX I2C adapter registered <6>[ 1.339683] i2c i2c-1: IMX I2C adapter registered <6>[ 1.345804] i2c i2c-2: IMX I2C adapter registered <6>[ 1.352471] i2c i2c-3: IMX I2C adapter registered <6>[ 1.369195] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO <6>[ 1.452520] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA <6>[ 1.586724] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 1.599546] Trying to probe devices needed for running init ... <6>[ 1.631596] Freeing initrd memory: 18152K <6>[ 13.909224] ALSA device list: <6>[ 13.912475] No soundcards found. <6>[ 13.918320] Freeing unused kernel memory: 7616K <6>[ 13.923247] Run /init as init process Loading, please wait... Starting version 247.3-7+deb11u4 <6>[ 14.435930] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 7 mkt segment 2 supported-hw 0x80 0x4 <6>[ 14.527943] CAN device driver interface <6>[ 14.551486] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc1 <6>[ 14.563608] input: 30370000.snvs:snvs-powerkey as /devices/platform/soc@0/30000000.bus/30370000.snvs/30370000.snvs:snvs-powerkey/input/input1 <6>[ 14.578243] caam 30900000.crypto: device ID = 0x0a16040100000100 (Era 9) <4>[ 14.580387] imx-sdma 30bd0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2 <6>[ 14.585307] caam 30900000.crypto: job rings = 2, qi = 0 <6>[ 14.595965] imx-sdma 30bd0000.dma-controller: external firmware not found, using ROM firmware <6>[ 14.616917] hwmon hwmon0: temp1_input not attached to any thermal zone <6>[ 14.624643] lm75 3-004f: hwmon0: sensor 'tmp75c' <6>[ 14.625022] imx-dwmac 30bf0000.ethernet: IRQ eth_lpi not found <6>[ 14.639842] imx-dwmac 30bf0000.ethernet: User ID: 0x10, Synopsys ID: 0x51 <6>[ 14.642014] etnaviv etnaviv: bound 38000000.gpu (ops gpu_ops [etnaviv]) <6>[ 14.646997] imx-dwmac 30bf0000.ethernet: DWMAC4/5 <6>[ 14.658948] imx-dwmac 30bf0000.ethernet: DMA HW capability register supported <6>[ 14.666374] imx-dwmac 30bf0000.ethernet: RX Checksum Offload Engine supported <6>[ 14.666610] etnaviv etnaviv: bound 38008000.gpu (ops gpu_ops [etnaviv]) <4>[ 14.671204] rtc-ds1307 0-0032: oscillator failed, set time! <6>[ 14.671404] rtc-ds1307 0-0032: registered as rtc0 <3>[ 14.671723] rtc-ds1307 0-0032: hctosys: unable to read the hardware clock <6>[ 14.673799] imx-dwmac 30bf0000.ethernet: Wake-Up On Lan supported <6>[ 14.673898] imx-dwmac 30bf0000.ethernet: Enable RX Mitigation via HW Watchdog Timer <6>[ 14.680707] etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6204 <6>[ 14.686555] imx-dwmac 30bf0000.ethernet: Enabled L3L4 Flow TC (entries=8) <6>[ 14.693264] etnaviv-gpu 38008000.gpu: model: GC520, revision: 5341 <6>[ 14.698587] imx-dwmac 30bf0000.ethernet: Enabled RFS Flow TC (entries=10) <6>[ 14.698613] imx-dwmac 30bf0000.ethernet: Enabling HW TC (entries=256, max_off=256) <6>[ 14.705620] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 <6>[ 14.712919] imx-dwmac 30bf0000.ethernet: Using 34/40 bits DMA host/device width <6>[ 14.735973] ina2xx 3-0040: power monitor ina219 (Rshunt = 10000 uOhm) <6>[ 14.865745] caam algorithms registered in /proc/crypto <6>[ 14.871980] caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto <6>[ 14.879663] caam 30900000.crypto: registering rng-caam <6>[ 14.885313] caam 30900000.crypto: rng crypto API alg registered prng-caam Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... Waiting up to 60 secs for any ethernet to become available Device <5>[ 14.922291] random: crng init done /sys/class/net/eth0 found done. IP-Config: eth0 hardware address <6>[ 14.971989] imx-dwmac 30bf0000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 00:14:2d:e5:68:21 mtu 1500 DHCP <6>[ 14.982217] imx-dwmac 30bf0000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-1 <6>[ 14.992648] imx-dwmac 30bf0000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-2 <6>[ 15.000822] imx-dwmac 30bf0000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-3 <6>[ 15.008932] imx-dwmac 30bf0000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-4 <6>[ 15.083717] imx-dwmac 30bf0000.ethernet eth0: PHY [stmmac-0:07] driver [Microchip KSZ9131 Gigabit PHY] (irq=35) <6>[ 15.104773] imx-dwmac 30bf0000.ethernet eth0: No Safety Features support found <6>[ 15.112290] imx-dwmac 30bf0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported <6>[ 15.120934] imx-dwmac 30bf0000.ethernet eth0: registered PTP clock <6>[ 15.127712] imx-dwmac 30bf0000.ethernet eth0: FPE workqueue start <6>[ 15.134101] imx-dwmac 30bf0000.ethernet eth0: configuring for phy/rgmii-id link mode IP-Config: no response after 2 secs - giving up IP-Config: eth0 hardware address 00:14:2d:e5:68:21 mtu 1500 DHCP <6>[ 18.182569] imx-dwmac 30bf0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off IP-Config: no response after 3 secs - giving up IP-Config: eth0 hardware address 00:14:2d:e5:68:21 mtu 1500 DHCP IP-Config: eth0 complete (dhcp from 192.168.56.254): address: 192.168.56.51 broadcast: 192.168.56.255 netmask: 255.255.255.0 gateway: 192.168.56.254 dns0 : 192.168.56.254 dns1 : 0.0.0.0 domain : mayfield.sirena.org.uk rootserver: 192.168.56.254 rootpath: filename : done. Begin: Running /scripts/nfs-bottom ... done. Begin: Running /scripts/init-bottom ... done. <30>[ 23.885934] systemd[1]: System time before build time, advancing clock. <6>[ 23.929135] NET: Registered PF_INET6 protocol family <6>[ 23.935353] Segment Routing with IPv6 <6>[ 23.939318] In-situ OAM (IOAM) with IPv6 <30>[ 23.979471] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) <30>[ 24.003319] systemd[1]: Detected architecture arm64. Welcome to [1mDebian GNU/Linux 11 (bullseye)[0m! <30>[ 24.028585] systemd[1]: Set hostname to . <30>[ 24.700743] systemd[1]: Queued start job for default target Graphical Interface. <30>[ 24.724843] systemd[1]: Created slice system-getty.slice. [[0;32m OK [0m] Created slice [0;1;39msystem-getty.slice[0m. <30>[ 24.748272] systemd[1]: Created slice system-modprobe.slice. [[0;32m OK [0m] Created slice [0;1;39msystem-modprobe.slice[0m. <30>[ 24.772272] systemd[1]: Created slice system-serial\x2dgetty.slice. [[0;32m OK [0m] Created slice [0;1;39msystem-serial\x2dgetty.slice[0m. <30>[ 24.796068] systemd[1]: Created slice User and Session Slice. [[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m. <30>[ 24.819472] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [[0;32m OK [0m] Started [0;1;39mDispatch Password …ts to Console Directory Watch[0m. <30>[ 24.843386] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [[0;32m OK [0m] Started [0;1;39mForward Password R…uests to Wall Directory Watch[0m. <30>[ 24.867336] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <30>[ 24.879407] systemd[1]: Reached target Local Encrypted Volumes. [[0;32m OK [0m] Reached target [0;1;39mLocal Encrypted Volumes[0m. <30>[ 24.903368] systemd[1]: Reached target Paths. [[0;32m OK [0m] Reached target [0;1;39mPaths[0m. <30>[ 24.919235] systemd[1]: Reached target Remote File Systems. [[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m. <30>[ 24.939200] systemd[1]: Reached target Slices. [[0;32m OK [0m] Reached target [0;1;39mSlices[0m. <30>[ 24.955254] systemd[1]: Reached target Swap. [[0;32m OK [0m] Reached target [0;1;39mSwap[0m. <30>[ 24.971534] systemd[1]: Listening on initctl Compatibility Named Pipe. [[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m. <30>[ 24.996301] systemd[1]: Listening on Journal Audit Socket. [[0;32m OK [0m] Listening on [0;1;39mJournal Audit Socket[0m. <30>[ 25.020112] systemd[1]: Listening on Journal Socket (/dev/log). [[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m. <30>[ 25.043762] systemd[1]: Listening on Journal Socket. [[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m. <30>[ 25.072327] systemd[1]: Listening on Network Service Netlink Socket. [[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m. <30>[ 25.096833] systemd[1]: Listening on udev Control Socket. [[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m. <30>[ 25.119700] systemd[1]: Listening on udev Kernel Socket. [[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m. <30>[ 25.155388] systemd[1]: Mounting Huge Pages File System... Mounting [0;1;39mHuge Pages File System[0m... <30>[ 25.178324] systemd[1]: Mounting POSIX Message Queue File System... Mounting [0;1;39mPOSIX Message Queue File System[0m... <30>[ 25.227409] systemd[1]: Mounting Kernel Debug File System... Mounting [0;1;39mKernel Debug File System[0m... <30>[ 25.247622] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. <30>[ 25.260337] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting [0;1;39mCreate list of st…odes for the current kernel[0m... <30>[ 25.299577] systemd[1]: Starting Load Kernel Module configfs... Starting [0;1;39mLoad Kernel Module configfs[0m... <30>[ 25.322602] systemd[1]: Starting Load Kernel Module drm... Starting [0;1;39mLoad Kernel Module drm[0m... <30>[ 25.346566] systemd[1]: Starting Load Kernel Module fuse... Starting [0;1;39mLoad Kernel Module fuse[0m... <30>[ 25.371337] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <6>[ 25.381411] fuse: init (API version 7.37) <30>[ 25.407598] systemd[1]: Starting Journal Service... Starting [0;1;39mJournal Service[0m... <30>[ 25.434256] systemd[1]: Starting Load Kernel Modules... Starting [0;1;39mLoad Kernel Modules[0m... <30>[ 25.454928] systemd[1]: Starting Remount Root and Kernel File Systems... Starting [0;1;39mRemount Root and Kernel File Systems[0m... <30>[ 25.511493] systemd[1]: Starting Coldplug All udev Devices... Starting [0;1;39mColdplug All udev Devices[0m... <30>[ 25.535026] systemd[1]: Mounted Huge Pages File System. [[0;32m OK [0m] Mounted [0;1;39mHuge Pages File System[0m. <30>[ 25.559667] systemd[1]: Mounted POSIX Message Queue File System. [[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m. <30>[ 25.583580] systemd[1]: Started Journal Service. [[0;32m OK [0m] Started [0;1;39mJournal Service[0m. [[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m. [[0;32m OK [0m] Finished [0;1;39mCreate list of st… nodes for the current kernel[0m. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Modules[0m. [[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m. Mounting [0;1;39mFUSE Control File System[0m... Mounting [0;1;39mKernel Configuration File System[0m... Starting [0;1;39mFlush Journal to Persistent Storage[0m... Starting [0;1;39mLoad/Save Random Seed[0m... Starting [0;1;39mApply <46>[ 25.840471] systemd-journald[302]: Received client request to flush runtime journal. Kernel Variables[0m... Starting [0;1;39mCreate System Users[0m... [[0;32m OK [0m] Mounted [0;1;39mFUSE Control File System[0m. [[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m. [[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m. [[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m. [[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m. [[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m. [[0;32m OK [0m] Finished [0;1;39mCreate System Users[0m. Starting [0;1;39mCreate Static Device Nodes in /dev[0m... [[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m. [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems (Pre)[0m. [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m. Starting [0;1;39mCreate Volatile Files and Directories[0m... Starting [0;1;39mRule-based Manage…for Device Events and Files[0m... [[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m. Starting [0;1;39mNetwork Service[0m... [[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m. Starting [0;1;39mNetwork Time Synchronization[0m... Starting [0;1;39mUpdate UTMP about System Boot/Shutdown[0m... [[0;32m OK [0m] Finished [0;1;39mUpdate UTMP about System Boot/Shutdown[0m. [[0;32m OK [0m] Started [0;1;39mNetwork Service[0m. Starting [0;1;39mNetwork Name Resolution[0m... [[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronization[0m. [[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m. [[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m. [[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m. [[0;32m OK [0m] Reached target [0;1;39mSystem Time Synchronized[0m. [[0;32m OK [0m] Started [0;1;39mDaily apt download activities[0m. [[0;32m OK [0m] Started [0;1;39mDaily apt upgrade and clean activities[0m. [[0;32m OK [0m] Started [0;1;39mPeriodic ext4 Onli…ata Check for All Filesystems[0m. [[0;32m OK [0m] Started [0;1;39mDiscard unused blocks once a week[0m. [[0;32m OK [0m] Reached target [0;1;39mTimers[0m. [[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m. [[0;32m OK [0m] Reached target [0;1;39mSockets[0m. [[0;32m OK [0m] Reached target [0;1;39mBasic System[0m. [[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m. Starting [0;1;39mRemove Stale Onli…t4 Metadata Check Snapshots[0m... Starting [0;1;39mUser Login Management[0m... [[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m. [[0;32m OK [0m] Finished [0;1;39mRemove Stale Onli…ext4 Metadata Check Snapshots[0m. [[0;32m OK [0m] Found device [0;1;39m/dev/ttymxc2[0m. [[0;32m OK [0m] Reached target [0;1;39mNetwork[0m. [[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m. Starting [0;1;39mPermit User Sessions[0m... [[0;32m OK [0m] Started [0;1;39mUser Login Management[0m. [[0;32m OK [0m] Finished [0;1;39mPermit User Sessions[0m. [[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m. [[0;32m OK [0m] Started [0;1;39mSerial Getty on ttymxc2[0m. [[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m. [[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m. [[0;32m OK [0m] Reached target [0;1;39mGraphical Interface[0m. Starting [0;1;39mUpdate UTMP about System Runlevel Changes[0m... [[0;32m OK [0m] Finished [0;1;39mUpdate UTMP about System Runlevel Changes[0m. Debian GNU/Linux 11 debian-bullseye-arm64 ttymxc2 debian-bullseye-arm64 login: root (automatic login) Linux debian-bullseye-arm64 6.1.80-cip15 #1 SMP PREEMPT Sat Mar 2 22:20:55 UTC 2024 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. / # / # export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/654721/extract-nfsrootfs-k9y1m0v8' export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/654721/extract-nfsrootfs-k9y1m0v8' / # export NFS_SERVER_IP='192.168.56.193' export NFS_SERVER_IP='192.168.56.193' / # # # / # export SHELL=/bin/bash export SHELL=/bin/bash / # . /lava-654721/environment . /lava-654721/environment / # /lava-654721/bin/lava-test-runner /lava-654721/0 /lava-654721/bin/lava-test-runner /lava-654721/0 + export TESTRUN_ID=0_timesync-off + TESTRUN_ID=0_timesync-off + cd /lava-654721/0/tests/0_timesync-off ++ cat uuid + UUID=654721_1.6.2.4.1 + set +x + systemctl stop systemd-timesyncd + set +x + export TESTRUN_ID=1_kselftest-clone3 + TESTRUN_ID=1_kselftest-clone3 + cd /lava-654721/0/tests/1_kselftest-clone3 ++ cat uuid + UUID=654721_1.6.2.4.5 + set +x + cd ./automated/linux/kselftest/ + ./kselftest.sh -c clone3 -T '' -t kselftest_armhf.tar.gz -s True -u http://storage.kernelci.org/cip-gitlab/ci-pavel-linux-test/v6.1.78-cip15-404-gdddfc5d4f194/arm64/defconfig/gcc-10/kselftest.tar.xz -L '' -S /dev/null -b imx8mp-verdin-nonwifi-dahlia -g cip-gitlab -e '' -p /opt/kselftests/mainline/ -n 1 -i 1 INFO: install_deps skipped --2024-03-02 22:51:38-- http://storage.kernelci.org/cip-gitlab/ci-pavel-linux-test/v6.1.78-cip15-404-gdddfc5d4f194/arm64/defconfig/gcc-10/kselftest.tar.xz Resolving storage.kernelci.org (storage.kernelci.org)... 20.171.243.82 Connecting to storage.kernelci.org (storage.kernelci.org)|20.171.243.82|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1746384 (1.7M) [application/octet-stream] Saving to: 'kselftest.tar.xz' kselftest.tar.xz 0%[ ] 0 --.-KB/s kselftest.tar.xz 2%[ ] 49.92K 178KB/s kselftest.tar.xz 12%[=> ] 218.67K 386KB/s kselftest.tar.xz 52%[=========> ] 893.67K 1.02MB/s kselftest.tar.xz 100%[===================>] 1.67M 1.93MB/s in 0.9s 2024-03-02 22:51:39 (1.93 MB/s) - 'kselftest.tar.xz' saved [1746384/1746384] <6>[ 74.972289] platform 32f10100.usb: deferred probe pending <6>[ 74.978003] platform 32f10108.usb: deferred probe pending <6>[ 74.983694] platform 381f0040.usb-phy: deferred probe pending <6>[ 74.989723] platform 382f0040.usb-phy: deferred probe pending <6>[ 74.995743] platform 32ec0000.blk-ctrl: deferred probe pending <6>[ 75.001846] platform 38330000.blk-ctrl: deferred probe pending <6>[ 75.007952] platform 32f10000.blk-ctrl: deferred probe pending skiplist: ======================================== ======================================== clone3:clone3 clone3:clone3_clear_sighand clone3:clone3_set_tid clone3:clone3_cap_checkpoint_restore ============== Tests to run =============== clone3:clone3 clone3:clone3_clear_sighand clone3:clone3_set_tid clone3:clone3_cap_checkpoint_restore ===========End Tests to run =============== shardfile-clone3 pass <12>[ 93.732684] kselftest: Running tests in clone3 TAP version 13 1..4 # selftests: clone3: clone3 # TAP version 13 # 1..17 # # clone3() syscall supported # # [496] Trying clone3() with flags 0 (size 0) # # I am the parent (496). My child's pid is 497 # # [496] clone3() with flags says: 0 expected 0 # ok 1 [496] Result (0) matches expectation (0) # # [496] Trying clone3() with flags 0x20000000 (size 0) # # I am the parent (496). My child's pid is 498 # # [496] clone3() with flags says: 0 expected 0 # ok 2 [496] Result (0) matches expectation (0) # # [496] Trying clone3() with flags 0 (size 64) # # I am the parent (496). My child's pid is 499 # # [496] clone3() with flags says: 0 expected 0 # ok 3 [496] Result (0) matches expectation (0) # # [496] Trying clone3() with flags 0 (size 56) # # Invalid argument - Failed to create new process # # [496] clone3() with flags says: -22 expected -22 # ok 4 [496] Result (-22) matches expectation (-22) # # [496] Trying clone3() with flags 0 (size 96) # # I am the parent (496). My child's pid is 500 # # [496] clone3() with flags says: 0 expected 0 # ok 5 [496] Result (0) matches expectation (0) # # [496] Trying clone3() with flags 0 (size 0) # # Invalid argument - Failed to create new process # # [496] clone3() with flags says: -22 expected -22 # ok 6 [496] Result (-22) matches expectation (-22) # # [496] Trying clone3() with flags 0 (size 0) # # Invalid argument - Failed to create new process # # [496] clone3() with flags says: -22 expected -22 # ok 7 [496] Result (-22) matches expectation (-22) # # [496] Trying clone3() with flags 0 (size 0) # # Invalid argument - Failed to create new process # # [496] clone3() with flags says: -22 expected -22 # ok 8 [496] Result (-22) matches expectation (-22) # # [496] Trying clone3() with flags 0 (size 0) # # Invalid argument - Failed to create new process # # [496] clone3() with flags says: -22 expected -22 # ok 9 [496] Result (-22) matches expectation (-22) # # [496] Trying clone3() with flags 0 (size 96) # # I am the parent (496). My child's pid is 501 # # [496] clone3() with flags says: 0 expected 0 # ok 10 [496] Result (0) matches expectation (0) # # [496] Trying clone3() with flags 0 (size 104) # # Argument list too long - Failed to create new process # # [496] clone3() with flags says: -7 expected -7 # ok 11 [496] Result (-7) matches expectation (-7) # # [496] Trying clone3() with flags 0 (size 176) # # Argument list too long - Failed to create new process # # [496] clone3() with flags says: -7 expected -7 # ok 12 [496] Result (-7) matches expectation (-7) # # [496] Trying clone3() with flags 0 (size 4104) # # Argument list too long - Failed to create new process # # [496] clone3() with flags says: -7 expected -7 # ok 13 [496] Result (-7) matches expectation (-7) # # [496] Trying clone3() with flags 0x20000000 (size 64) # # I am the parent (496). My child's pid is 502 # # [496] clone3() with flags says: 0 expected 0 # ok 14 [496] Result (0) matches expectation (0) # # [496] Trying clone3() with flags 0x20000000 (size 56) # # Invalid argument - Failed to create new process # # [496] clone3() with flags says: -22 expected -22 # ok 15 [496] Result (-22) matches expectation (-22) # # [496] Trying clone3() with flags 0x20000000 (size 96) # # I am the parent (496). My child's pid is 503 # # [496] clone3() with flags says: 0 expected 0 # ok 16 [496] Result (0) matches expectation (0) # # [496] Trying clone3() with flags 0x20000000 (size 4104) # # Argument list too long - Failed to create new process # # [496] clone3() with flags says: -7 expected -7 # ok 17 [496] Result (-7) matches expectation (-7) # # Totals: pass:17 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 1 selftests: clone3: clone3 # selftests: clone3: clone3_clear_sighand # TAP version 13 # 1..1 # # clone3() syscall supported # ok 1 Cleared signal handlers for child process # # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 2 selftests: clone3: clone3_clear_sighand # selftests: clone3: clone3_set_tid # TAP version 13 # 1..29 # # clone3() syscall supported # # /proc/sys/kernel/pid_max 4194304 # # [540] Trying clone3() with CLONE_SET_TID to 0 and 0x0 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID 0 says :-22 - expected -22 # ok 1 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to 0 and 0x0 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID 0 says :-22 - expected -22 # ok 2 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to 0 and 0x0 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID 0 says :-22 - expected -22 # ok 3 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to 0 and 0x0 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID 0 says :-22 - expected -22 # ok 4 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to 0 and 0x0 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID 0 says :-22 - expected -22 # ok 5 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to -1 and 0x0 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID -1 says :-22 - expected -22 # ok 6 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to -1 and 0x0 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID -1 says :-22 - expected -22 # ok 7 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to -1 and 0x0 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID -1 says :-22 - expected -22 # ok 8 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to -1 and 0x0 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID -1 says :-22 - expected -22 # ok 9 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to -1 and 0x0 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID -1 says :-22 - expected -22 # ok 10 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to 0 and 0x0 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID 0 says :-22 - expected -22 # ok 11 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to -1 and 0x0 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID -1 says :-22 - expected -22 # ok 12 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to -1 and 0x0 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID -1 says :-22 - expected -22 # ok 13 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to -1 and 0x20000000 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID -1 says :-22 - expected -22 # ok 14 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to 1 and 0x0 # # File exists - Failed to create new process # # [540] clone3() with CLONE_SET_TID 1 says :-17 - expected -17 # ok 15 [540] Result (-17) matches expectation (-17) # # [540] Trying clone3() with CLONE_SET_TID to 1 and 0x20000000 # # I am the child, my PID is 1 (expected 1) # # I am the parent (540). My child's pid is 541 # # [540] clone3() with CLONE_SET_TID 1 says :0 - expected 0 # ok 16 [540] Result (0) matches expectation (0) # # [540] Trying clone3() with CLONE_SET_TID to 4194304 and 0x0 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID 4194304 says :-22 - expected -22 # ok 17 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to 4194304 and 0x20000000 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID 4194304 says :-22 - expected -22 # ok 18 [540] Result (-22) matches expectation (-22) # # Child has PID 542 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID 4194304 says :-22 - expected -22 # ok 18 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to 542 and 0x0 # # I am the child, my PID is 542 (expected 542) # # I am the parent (540). My child's pid is 542 # # [540] clone3() with CLONE_SET_TID 542 says :0 - expected 0 # ok 19 [540] Result (0) matches expectation (0) # # [540] Trying clone3() with CLONE_SET_TID to 542 and 0x20000000 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID 542 says :-22 - expected -22 # ok 20 [540] Result (-22) matches expectation (-22) # # [540] Trying clone3() with CLONE_SET_TID to 1 and 0x20000000 # # I am the child, my PID is 1 (expected 1) # # I am the parent (540). My child's pid is 542 # # [540] clone3() with CLONE_SET_TID 1 says :0 - expected 0 # ok 21 [540] Result (0) matches expectation (0) # # unshare PID namespace # # [540] Trying clone3() with CLONE_SET_TID to 542 and 0x0 # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID 542 says :-22 - expected -22 # ok 22 [540] Result (-22) matches expectation (-22) # # [1] Trying clone3() with CLONE_SET_TID to 43 and 0x0 # # Invalid argument - Failed to create new process # # [1] clone3() with CLONE_SET_TID 43 says :-22 - expected -22 # ok 23 [1] Result (-22) matches expectation (-22) # # [1] Trying clone3() with CLONE_SET_TID to 43 and 0x0 # # I am the child, my PID is 43 (expected 43) # # I am the parent (1). My child's pid is 43 # # [1] clone3() with CLONE_SET_TID 43 says :0 - expected 0 # ok 24 [1] Result (0) matches expectation (0) # # Child in PID namespace has PID 1 # # [1] Trying clone3() with CLONE_SET_TID to 2 and 0x0 # # I am the child, my PID is 2 (expected 2) # # I am the parent (1). My child's pid is 2 # # [1] clone3() with CLONE_SET_TID 2 says :0 - expected 0 # ok 25 [1] Result (0) matches expectation (0) # # [1] Trying clone3() with CLONE_SET_TID to 1 and 0x20000000 # # Invalid argument - Failed to create new process # # [1] clone3() with CLONE_SET_TID 1 says :-22 - expected -22 # ok 26 [1] Result (-22) matches expectation (-22) # # [1] Trying clone3() with CLONE_SET_TID to 1 and 0x20000000 # # Invalid argument - Failed to create new process # # [1] clone3() with CLONE_SET_TID 1 says :-22 - expected -22 # ok 27 [1] Result (-22) matches expectation (-22) # # [1] Trying clone3() with CLONE_SET_TID to 1 and 0x20000000 # # I am the child, my PID is 1 (expected 1) # # [1] Child is ready and waiting # # I am the parent (1). My child's pid is 42 # # [1] clone3() with CLONE_SET_TID 1 says :0 - expected 0 # ok 28 [1] Result (0) matches expectation (0) # # Invalid argument - Failed to create new process # # [540] clone3() with CLONE_SET_TID 542 says :-22 - expected -22 # ok 22 [540] Result (-22) matches expectation (-22) # # [540] Child is ready and waiting # ok 29 PIDs in all namespaces as expected (542,42,1) # # Totals: pass:29 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 3 selftests: clone3: clone3_set_tid # selftests: clone3: clone3_cap_checkpoint_restore # TAP version 13 # 1..1 # # Starting 1 tests from 1 test cases. # # RUN global.clone3_cap_checkpoint_restore ... # # clone3_cap_checkpoint_restore.c:155:clone3_cap_checkpoint_restore:Child has PID 564 # # clone3() syscall supported # # clone3_cap_checkpoint_restore.c:88:clone3_cap_checkpoint_restore:[563] Trying clone3() with CLONE_SET_TID to 564 # # clone3() syscall supported # # clone3_cap_checkpoint_restore.c:55:clone3_cap_checkpoint_restore:Operation not permitted - Failed to create new process # # clone3_cap_checkpoint_restore.c:90:clone3_cap_checkpoint_restore:[563] clone3() with CLONE_SET_TID 564 says:-1 # # clone3_cap_checkpoint_restore.c:88:clone3_cap_checkpoint_restore:[563] Trying clone3() with CLONE_SET_TID to 564 # # clone3_cap_checkpoint_restore.c:70:clone3_cap_checkpoint_restore:I am the parent (563). My child's pid is 564 # # clone3_cap_checkpoint_restore.c:63:clone3_cap_checkpoint_restore:I am the child, my PID is 564 (expected 564) # # clone3_cap_checkpoint_restore.c:90:clone3_cap_checkpoint_restore:[563] clone3() with CLONE_SET_TID 564 says:0 # # OK global.clone3_cap_checkpoint_restore # ok 1 global.clone3_cap_checkpoint_restore # # PASSED: 1 / 1 tests passed. # # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 4 selftests: clone3: clone3_cap_checkpoint_restore Traceback (most recent call last): File \"/lava-654721/0/tests/1_kselftest-clone3/automated/linux/kselftest/./parse-output.py\", line 4, in from tap import parser ModuleNotFoundError: No module named 'tap' + ../../utils/send-to-lava.sh ./output/result.txt + set +x / #