[Enter `^Ec?' for help] U-Boot SPL 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45) U-Boot 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45 +0000) Model: Radxa Rock 2 Square DRAM: 2 GiB MMC: dwmmc@ff0c0000: 0, dwmmc@ff0f0000: 1 In: serial@ff690000 Out: serial@ff690000 Err: serial@ff690000 Incorrect eeprom header Net: eth0: ethernet@ff290000 Hit any key to stop autoboot: 1  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp ethernet@ff290000 Waiting for PHY auto negotiation to complete...... done Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.22 (267 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x2000000 13684916/tftp-deploy-5thxy720/kernel/zImage tftp 0x2000000 13684916/tftp-deploy-5thxy720/kernel/zImage Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '13684916/tftp-deploy-5thxy720/kernel/zImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ### 3.6 MiB/s done Bytes transferred = 10531328 (a0b200 hex) => tftp 0x4000000 13684916/tftp-deploy-5thxy720/ramdisk/ramdisk.cpio.gz.uboot tftp 0x4000000 13684916/tftp-deploy-5thxy720/ramdisk/ramdisk.cpio.gz.uboot Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '13684916/tftp-deploy-5thxy720/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x4000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# # 3.7 MiB/s done Bytes transferred = 17182121 (1062da9 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x1f00000 13684916/tftp-deploy-5thxy720/dtb/rk3288-rock2-square.dtb tftp 0x1f00000 13684916/tftp-deploy-5thxy720/dtb/rk3288-rock2-square.dtb Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '13684916/tftp-deploy-5thxy720/dtb/rk3288-rock2-square.dtb'. Load address: 0x1f00000 Loading: *### 3.3 MiB/s done Bytes transferred = 41716 (a2f4 hex) => setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x2000000 0x4000000 0x1f00000 bootz 0x2000000 0x4000000 0x1f00000 Kernel image @ 0x2000000 [ 0x000000 - 0xa0b200 ] ## Loading init Ramdisk from Legacy Image at 04000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17182057 Bytes = 16.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Using Device Tree in place at 01f00000, end 01f0d2f3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x500 [ 0.000000] Linux version 6.1.90-cip20-rt11 (KernelCI@build-j189238-arm-gcc-10-multi-v7-defconfig-zs8dw) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed May 8 00:28:30 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Radxa Rock 2 Square [ 0.000000] earlycon: uart0 at MMIO32 0xff690000 (options '115200n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 1970748K/2097152K available (14336K kernel code, 2470K rwdata, 6212K rodata, 2048K init, 427K bss, 60868K reserved, 65536K cma-reserved, 1245184K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.009084] Switching to timer-based delay loop, resolution 41ns <6>[ 0.023816] Console: colour dummy device 80x30 <6>[ 0.029036] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.040713] CPU: Testing write buffer coherency: ok <6>[ 0.046392] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.052238] pid_max: default: 32768 minimum: 301 <6>[ 0.057773] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.066114] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.075867] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500 <6>[ 0.083485] Setting up static identity map for 0x300000 - 0x3000ac <6>[ 0.092863] rcu: Hierarchical SRCU implementation. <6>[ 0.092869] rcu: Max phase no-delay instances is 1000. <6>[ 0.092960] printk: bootconsole [uart0] printing thread started <6>[ 0.116418] EFI services will not be available. <6>[ 0.116766] smp: Bringing up secondary CPUs ... <6>[ 0.118575] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501 <6>[ 0.118593] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.120516] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502 <6>[ 0.120534] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.122453] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503 <6>[ 0.122471] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.122589] smp: Brought up 1 node, 4 CPUs <6>[ 0.122602] SMP: Total of 4 processors activated (192.00 BogoMIPS). <6>[ 0.122612] CPU: All CPU(s) started in SVC mode. <6>[ 0.123257] devtmpfs: initialized <6>[ 0.132866] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0 <6>[ 0.133102] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.133124] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.135119] pinctrl core: initialized pinctrl subsystem <6>[ 0.139187] DMI not present or invalid. <6>[ 0.140018] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.238701] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.241781] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.241856] cpuidle: using governor menu <6>[ 0.242534] No ATAGs? <6>[ 0.242674] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.242686] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.246301] Serial: AMBA PL011 UART driver <6>[ 0.270399] platform ff940000.vop: Fixed dependency cycle(s) with /hdmi@ff980000 <6>[ 0.270493] platform ff930000.vop: Fixed dependency cycle(s) with /hdmi@ff980000 <6>[ 0.270580] platform ff980000.hdmi: Fixed dependency cycle(s) with /vop@ff940000 <6>[ 0.270662] platform ff980000.hdmi: Fixed dependency cycle(s) with /vop@ff930000 <6>[ 0.286278] rockchip-gpio ff750000.gpio: probed /pinctrl/gpio@ff750000 <6>[ 0.287030] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000 <6>[ 0.287765] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000 <6>[ 0.288485] rockchip-gpio ff7a0000.gpio: probed /pinctrl/gpio@ff7a0000 <6>[ 0.289293] rockchip-gpio ff7b0000.gpio: probed /pinctrl/gpio@ff7b0000 <6>[ 0.290006] rockchip-gpio ff7c0000.gpio: probed /pinctrl/gpio@ff7c0000 <6>[ 0.290735] rockchip-gpio ff7d0000.gpio: probed /pinctrl/gpio@ff7d0000 <6>[ 0.291465] rockchip-gpio ff7e0000.gpio: probed /pinctrl/gpio@ff7e0000 <6>[ 0.292180] rockchip-gpio ff7f0000.gpio: probed /pinctrl/gpio@ff7f0000 <6>[ 0.403074] iommu: Default domain type: Translated <6>[ 0.403083] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.403968] SCSI subsystem initialized <6>[ 0.409144] usbcore: registered new interface driver usbfs <6>[ 0.409201] usbcore: registered new interface driver hub <6>[ 0.409247] usbcore: registered new device driver usb <6>[ 0.411889] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.411896] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.411922] PTP clock support registered <6>[ 0.412183] EDAC MC: Ver: 3.0.0 <6>[ 0.416629] vgaarb: loaded <6>[ 0.467055] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.493021] NET: Registered PF_INET protocol family <6>[ 0.493279] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.495609] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.495641] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.495660] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.495741] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 0.496113] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.496208] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.496260] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.496464] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.497146] RPC: Registered named UNIX socket transport module. <6>[ 0.497155] RPC: Registered udp transport module. <6>[ 0.497160] RPC: Registered tcp transport module. <6>[ 0.497163] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.497172] PCI: CLS 0 bytes, default 64 <6>[ 0.498418] Trying to unpack rootfs image as initramfs... <6>[ 0.612165] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available <5>[ 0.614022] Initialise system trusted keyrings <6>[ 0.614302] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 0.621427] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.622188] NFS: Registering the id_resolver key type <5>[ 0.622243] Key type id_resolver registered <5>[ 0.622249] Key type id_legacy registered <6>[ 0.622350] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.622357] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 0.622394] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 0.622954] Key type asymmetric registered <5>[ 0.622962] Asymmetric key parser 'x509' registered <6>[ 0.623144] bounce: pool size: 64 pages <6>[ 0.623268] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 0.623277] io scheduler mq-deadline registered <6>[ 0.623283] io scheduler kyber registered <6>[ 0.790463] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 0.790479] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 <6>[ 0.806089] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 0.806104] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10 <6>[ 0.894340] printk: console [ttyS2] enabled <6>[ 0.894345] printk: console [ttyS2] printing thread started <6>[ 0.894352] printk: bootconsole [uart0] disabled <6>[ 0.911356] printk: bootconsole [uart0] printing thread stopped <6>[ 0.915165] SuperH (H)SCI(F) driver initialized <6>[ 0.916918] msm_serial: driver initialized <6>[ 0.916932] STMicroelectronics ASC driver initialized <6>[ 0.918915] STM32 USART driver initialized <6>[ 0.949106] brd: module loaded <6>[ 0.956011] loop: module loaded <6>[ 0.974570] CAN device driver interface <6>[ 0.976618] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 0.978720] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 0.978726] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 0.978790] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 0.978795] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 0.986822] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 0.986879] usbcore: registered new interface driver pegasus <6>[ 0.986934] usbcore: registered new interface driver asix <6>[ 0.986983] usbcore: registered new interface driver ax88179_178a <6>[ 0.987022] usbcore: registered new interface driver cdc_ether <6>[ 0.987104] usbcore: registered new interface driver smsc75xx <6>[ 0.987155] usbcore: registered new interface driver smsc95xx <6>[ 0.987195] usbcore: registered new interface driver net1080 <6>[ 0.987233] usbcore: registered new interface driver cdc_subset <6>[ 0.987279] usbcore: registered new interface driver zaurus <6>[ 0.987359] usbcore: registered new interface driver cdc_ncm <4>[ 0.990725] dwc2 ff540000.usb: supply vusb_d not found, using dummy regulator <4>[ 0.990884] dwc2 ff540000.usb: supply vusb_a not found, using dummy regulator <6>[ 1.104705] dwc2 ff540000.usb: DWC OTG Controller <6>[ 1.104739] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1 <6>[ 1.104788] dwc2 ff540000.usb: irq 51, io mem 0xff540000 <6>[ 1.105667] hub 1-0:1.0: USB hub found <6>[ 1.105724] hub 1-0:1.0: 1 port detected <4>[ 1.106473] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator <4>[ 1.106636] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator <6>[ 1.237144] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM <6>[ 1.320855] dwc2 ff580000.usb: DWC OTG Controller <6>[ 1.320887] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2 <6>[ 1.320926] dwc2 ff580000.usb: irq 52, io mem 0xff580000 <6>[ 1.321728] hub 2-0:1.0: USB hub found <6>[ 1.321776] hub 2-0:1.0: 1 port detected <6>[ 1.327450] usbcore: registered new interface driver usb-storage <6>[ 1.336381] i2c_dev: i2c /dev entries driver <6>[ 1.339949] ehci-platform ff500000.usb: EHCI Host Controller <6>[ 1.339978] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3 <6>[ 1.341855] i2c 0-005a: Fixed dependency cycle(s) with /i2c@ff650000/act8846@5a/regulators/REG4 <6>[ 1.341981] i2c 0-005a: Fixed dependency cycle(s) with /i2c@ff650000/act8846@5a/regulators/REG2 <6>[ 1.346373] VDD_LOG: Bringing 1100000uV into 1000000-1000000uV <6>[ 1.372413] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! <6>[ 1.376971] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! <4>[ 1.423557] dw_wdt ff800000.watchdog: No valid TOPs array specified <6>[ 1.434643] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 500000 KHz, changing to: 600000 KHz <6>[ 1.437915] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.437920] sdhci: Copyright(c) Pierre Ossman <6>[ 1.440610] Synopsys Designware Multimedia Card Interface Driver <6>[ 1.442927] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.455041] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 1.481228] ehci-platform ff500000.usb: irq 54, io mem 0xff500000 <6>[ 1.481264] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.482172] usbcore: registered new interface driver usbhid <6>[ 1.482176] usbhid: USB HID core driver <6>[ 1.485471] NET: Registered PF_INET6 protocol family <6>[ 1.485980] Segment Routing with IPv6 <6>[ 1.486002] In-situ OAM (IOAM) with IPv6 <6>[ 1.486036] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.486292] NET: Registered PF_PACKET protocol family <6>[ 1.486295] can: controller area network core <6>[ 1.486320] NET: Registered PF_CAN protocol family <6>[ 1.486323] can: raw protocol <6>[ 1.486325] can: broadcast manager protocol <6>[ 1.486329] can: netlink gateway - max_hops=1 <5>[ 1.486482] Key type dns_resolver registered <6>[ 1.486531] ThumbEE CPU extension supported. <5>[ 1.486536] Registering SWP/SWPB emulation handler <6>[ 1.486808] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 1.486815] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 1.486839] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <5>[ 1.486948] Loading compiled-in X.509 certificates <6>[ 1.508106] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 1.508155] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <6>[ 1.508210] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00 <6>[ 1.508506] hub 3-0:1.0: USB hub found <6>[ 1.508525] hub 3-0:1.0: 1 port detected <6>[ 1.508718] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input). <6>[ 1.508722] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30). <6>[ 1.508726] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10). <6>[ 1.508732] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no). <6>[ 1.508751] rk_gmac-dwmac ff290000.ethernet: clock input from PHY <6>[ 1.513759] rk_gmac-dwmac ff290000.ethernet: init for RGMII <6>[ 1.513884] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35 <6>[ 1.513892] rk_gmac-dwmac ff290000.ethernet: DWMAC1000 <6>[ 1.513895] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported <6>[ 1.513898] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported <6>[ 1.513900] rk_gmac-dwmac ff290000.ethernet: COE Type 2 <6>[ 1.513903] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported <6>[ 1.513906] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported <6>[ 1.513940] rk_gmac-dwmac ff290000.ethernet: Normal descriptors <6>[ 1.513943] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled <6>[ 1.513945] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer <6>[ 1.691211] Freeing initrd memory: 16780K <6>[ 1.723112] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL) <6>[ 1.723119] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL) <6>[ 1.728871] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 1.729110] dwmmc_rockchip ff0f0000.mmc: IDMAC supports 32-bit address mode. <6>[ 1.729206] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 1.729589] dwmmc_rockchip ff0c0000.mmc: IDMAC supports 32-bit address mode. <6>[ 1.807039] usb 3-1: new high-speed USB device number 2 using ehci-platform <6>[ 1.828492] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 1.828497] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 1.828514] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 1.828636] dwmmc_rockchip ff0f0000.mmc: Using internal DMA controller. <6>[ 1.828642] dwmmc_rockchip ff0f0000.mmc: Version ID is 270a <6>[ 1.828662] dwmmc_rockchip ff0f0000.mmc: DW MMC controller at irq 63,32 bit host data width,256 deep fifo <6>[ 1.828716] dwmmc_rockchip ff0c0000.mmc: Using internal DMA controller. <6>[ 1.828721] dwmmc_rockchip ff0c0000.mmc: Version ID is 270a <6>[ 1.828738] dwmmc_rockchip ff0c0000.mmc: DW MMC controller at irq 62,32 bit host data width,256 deep fifo <6>[ 1.831605] dwmmc_rockchip ff0f0000.mmc: allocated mmc-pwrseq <6>[ 1.831614] mmc_host mmc1: card is non-removable. <6>[ 1.834062] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 1.834123] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 1.834128] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 1.834142] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 1.844101] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 1.844692] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 1.859163] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 1.951465] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 1.951915] mmc1: new high speed MMC card at address 0001 <6>[ 1.952245] mmcblk1: mmc1:0001 032GE4 29.1 GiB <6>[ 1.955142] mmcblk1: p1 p2 <6>[ 1.955535] mmcblk1boot0: mmc1:0001 032GE4 4.00 MiB <6>[ 1.956428] mmcblk1boot1: mmc1:0001 032GE4 4.00 MiB <6>[ 1.957170] mmcblk1rpmb: mmc1:0001 032GE4 4.00 MiB, chardev (236:0) <6>[ 2.008799] hub 3-1:1.0: USB hub found <6>[ 2.009121] hub 3-1:1.0: 4 ports detected <6>[ 2.041954] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 2.041961] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 2.041976] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 2.045701] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.045769] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 2.045774] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 2.045788] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 2.105795] rk_gmac-dwmac ff290000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 <6>[ 2.107586] rk_gmac-dwmac ff290000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) <6>[ 2.117082] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found <6>[ 2.117090] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW <6>[ 2.144410] rk_gmac-dwmac ff290000.ethernet eth0: configuring for phy/rgmii link mode <6>[ 5.228417] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 5.228512] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 5.287139] Sending DHCP requests .., OK <6>[ 7.817255] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.22 <6>[ 7.817313] IP-Config: Complete: <6>[ 7.817325] device=eth0, hwaddr=4a:01:9c:e5:04:ff, ipaddr=192.168.201.22, mask=255.255.255.0, gw=192.168.201.1 <6>[ 7.817384] host=rk3288-rock2-square-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 7.817412] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 7.817445] nameserver0=192.168.201.1 <6>[ 7.818089] clk: Disabling unused clocks <4>[ 7.820592] dw-apb-uart ff690000.serial: forbid DMA for kernel console <6>[ 7.834229] Freeing unused kernel image (initmem) memory: 2048K <6>[ 7.900632] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.951265] udevd[114]: starting version 3.2.9 <5>[ 7.952203] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 7.952683] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 7.953077] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 7.957952] udevd[114]: specified user 'tss' unknown <27>[ 7.958027] udevd[114]: specified group 'tss' unknown <30>[ 7.959171] udevd[115]: starting eudev-3.2.9 <6>[ 8.148893] usbcore: registered new device driver onboard-usb-hub <6>[ 8.171504] rockchip-vop ff930000.vop: Adding to iommu group 0 <6>[ 8.171787] rockchip-vop ff940000.vop: Adding to iommu group 1 <6>[ 8.176391] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 8.207214] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 8.207223] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 8.207240] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 8.217879] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 8.222863] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 8.227089] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm]) <4>[ 8.227247] dwhdmi-rockchip ff980000.hdmi: supply avdd-0v9 not found, using dummy regulator <4>[ 8.227355] dwhdmi-rockchip ff980000.hdmi: supply avdd-1v8 not found, using dummy regulator <6>[ 8.227460] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY) <6>[ 8.229371] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) <6>[ 8.234566] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 <6>[ 8.234600] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 8.234857] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 8.234867] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 8.245898] rtc-hym8563 0-0051: registered as rtc0 <6>[ 8.247050] rtc-hym8563 0-0051: setting system clock to 2024-05-08T00:45:16 UTC (1715129116) <6>[ 8.362209] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 8.362218] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 8.362236] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 8.363440] dwmmc_rockchip ff0d0000.mmc: allocated mmc-pwrseq <6>[ 8.363446] mmc_host mmc0: card is non-removable. <6>[ 8.377102] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 8.391755] panfrost ffa30000.gpu: clock rate = 400000000 <6>[ 8.409194] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1 <6>[ 8.409202] panfrost ffa30000.gpu: features: 00000000,00000407, issues: 00000000,24040400 <6>[ 8.409206] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 <6>[ 8.409212] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1 <6>[ 8.437084] usb 3-1: reset high-speed USB device number 2 using ehci-platform <6>[ 8.447883] rk3288-crypto ff8a0000.crypto: will run requests pump with realtime priority <6>[ 8.448410] rk3288-crypto ff8a0000.crypto: Crypto Accelerator successfully registered <6>[ 8.491764] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) <6>[ 8.494330] mmc0: new high speed SDIO card at address 0001 <6>[ 8.525777] [drm] Initialized panfrost 1.2.0 20180908 for ffa30000.gpu on minor 1 <5>[ 8.622027] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 8.651852] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <5>[ 8.652636] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' <4>[ 8.652690] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 8.652697] cfg80211: failed to load regulatory.db <6>[ 8.661555] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 <4>[ 8.661670] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.radxa,rock2-square.bin failed with error -2 <4>[ 8.661701] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 <6>[ 9.087182] onboard-usb-hub 3-1: reset high-speed USB device number 2 using ehci-platform <6>[ 9.289439] hub 3-1:1.0: USB hub found <6>[ 9.289976] hub 3-1:1.0: 4 ports detected <6>[ 9.301271] hub 3-1:1.0: USB hub found <6>[ 9.301718] hub 3-1:1.0: 4 ports detected done Saving random seed: OK<5>[ 9.346614] random: dd: uninitialized urandom read (32 bytes read) Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <3>[ 9.675144] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 OK /bin/sh: can't access tty; job control turned off / # <5>[ 22.447038] random: crng init done <5>[ 22.447042] random: 1 urandom warning(s) missed due to ratelimiting / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-13684916/environment . /lava-13684916/environment / # /lava-13684916/bin/lava-test-runner /lava-13684916/0 /lava-13684916/bin/lava-test-runner /lava-13684916/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-13684916/0/tests/0_dmesg + cat uuid + UUID=13684916_1.5.2.4.1 + set +x + KERNELCI_LA<8>[ 23.031439] VA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 23.057733] <8>[ 23.071658] + set +x / # <8>[ 23.093796] <8>[ 23.094252]