connecting to NetworkSerialPort(target=Target(name='imx53-qsrb-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4010, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4010 connected to 10.8.254.5 (port 4010) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2019.05.0 #2 Mon May 27 12:33:32 CEST 2019 Board: Freescale i.MX53 Quick Start-R Board detected i.MX53 revision 2.1 i.MX reset reason POR (SRSR: 0x00000001) mc13xxx-i2c mc347080: Found MC34708 ID: 0x014 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:04:9f:02:71:b3 imx-usb 53f80200.usb@53f80200.of: USB EHCI 1.00 imx-esdhc 50004000.esdhc@50004000.of: registered as mmc0 imx-esdhc 50020000.esdhc@50020000.of: registered as mmc2 imx-ipuv3 18000000.ipu@18000000.of: IPUv3M probed netconsole: registered as netconsole-1 malloc space: 0xbfe7d3c0 -> 0xcfcfa77f (size 254.5 MiB) mmc0: detected SD card version 2.0 mmc0: registered mmc0 MCIMX53-START-R board 1.0 rev B envfs: no envfs (magic mismatch) - envfs never written? running /env/bin/init... [?25h Hit m for menu or any key to stop autoboot: type exit to get to the menu [1;32mbarebox@[1;36mFree scale i.MX53 Quick Start-R Board:/[0m bootm -v -r /mnt/tftp/829807/tftp-deploy-3ntt62oi/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/829807/tftp-deploy-3ntt62oi/dtb/imx53-qsrb.dtb /mnt/tftp/829807/tftp-deploy-3ntt62oi/kernel/zImage [1;32mbarebox@[1;36mFreescale i.MX53 Quick Start-R Board:/[0m bootm -v -r /mnt/tftp/829807/tftp-deploy-3ntt62oi/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/829807/tftp-deploy-3ntt62oi/dtb/imx53-qsrb.dtb /mnt/tftp/829807/tftp-deploy-3ntt62oi/kernel/zImage eth0: 100Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.164 Loading ARM Linux zImage '/mnt/tftp/829807/tftp-deploy-3ntt62oi/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x72a0e000 no initrd load address, defaulting to 0x78000000 Loaded initrd GZIP compressed '/mnt/tftp/829807/tftp-deploy-3ntt62oi/ramdisk/ramdisk.cpio.gz' initrd is at 0x78000000-0x78cb5dd0 Loading devicetree from '/mnt/tftp/829807/tftp-deploy-3ntt62oi/dtb/imx53-qsrb.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x72a0e000, initrd at 0x78000000, oftree at 0x78cb6000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.265-cip85-rt27 (KernelCI@build-j511216-arm-gcc-10-defconfig-preempt-rt-lvlkj) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP PREEMPT RT Wed Nov 16 01:38:48 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Freescale i.MX53 Quick Start-R Board [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xcb800000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 17 pages/cpu s38944 r8192 d22496 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 261120 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 938476K/1048576K available (12288K kernel code, 1636K rwdata, 4692K rodata, 2048K init, 406K bss, 44564K reserved, 65536K cma-reserved, 457740K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (13280 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1637 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 407 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] TrustZone Interrupt Controller (TZIC) initialized [ 0.000000] CPU identified as i.MX53, silicon rev 2.1 [ 0.000000] Switching to timer-based delay loop, resolution 25ns [ 0.000009] sched_clock: 32 bits at 40MHz, resolution 25ns, wraps every 53687091187ns [ 0.000023] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 47781511156 ns [ 0.001954] Console: colour dummy device 80x30 [ 0.002137] Calibrating delay loop (skipped), value calculated using timer frequency.. 80.00 BogoMIPS (lpj=400000) [ 0.002151] pid_max: default: 32768 minimum: 301 [ 0.002333] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002347] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.003273] CPU: Testing write buffer coherency: ok [ 0.003322] CPU0: Spectre v2: using BPIALL workaround [ 0.003814] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.004849] Setting up static identity map for 0x70300000 - 0x703000a0 [ 0.006137] rcu: Hierarchical SRCU implementation. [ 0.008887] EFI services will not be available. [ 0.009136] smp: Bringing up secondary CPUs ... [ 0.009150] smp: Brought up 1 node, 1 CPU [ 0.009162] SMP: Total of 1 processors activated (80.00 BogoMIPS). [ 0.009172] CPU: All CPU(s) started in SVC mode. [ 0.011161] devtmpfs: initialized [ 0.024885] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 [ 0.025746] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.025783] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.029644] pinctrl core: initialized pinctrl subsystem [ 0.032244] DMI not present or invalid. [ 0.033234] NET: Registered protocol family 16 [ 0.038284] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.046057] cpuidle: using governor menu [ 0.046662] No ATAGs? [ 0.046673] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.049278] Serial: AMBA PL011 UART driver [ 0.060463] imx53-pinctrl 53fa8000.iomuxc: Failed to create dummy-iomuxc-gpr@53fa8000 debugfs directory [ 0.060995] imx53-pinctrl 53fa8000.iomuxc: initialized IMX pinctrl driver [ 0.112660] vgaarb: loaded [ 0.113786] SCSI subsystem initialized [ 0.114631] usbcore: registered new interface driver usbfs [ 0.114715] usbcore: registered new interface driver hub [ 0.114792] usbcore: registered new device driver usb [ 0.116837] i2c i2c-1: IMX I2C adapter registered [ 0.116868] i2c i2c-1: can't use DMA, using PIO instead. [ 0.118295] i2c i2c-0: IMX I2C adapter registered [ 0.118323] i2c i2c-0: can't use DMA, using PIO instead. [ 0.119755] pps_core: LinuxPPS API ver. 1 registered [ 0.119770] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.119800] PTP clock support registered [ 0.120069] EDAC MC: Ver: 3.0.0 [ 0.124223] clocksource: Switched to clocksource mxc_timer1 [ 0.232658] NET: Registered protocol family 2 [ 0.233030] IP idents hash table entries: 8192 (order: 4, 65536 bytes) [ 0.234037] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 8192 bytes) [ 0.234084] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.234148] TCP bind hash table entries: 4096 (order: 4, 114688 bytes) [ 0.234508] TCP: Hash tables configured (established 4096 bind 4096) [ 0.234723] UDP hash table entries: 256 (order: 2, 16384 bytes) [ 0.234769] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes) [ 0.235032] NET: Registered protocol family 1 [ 0.235898] RPC: Registered named UNIX socket transport module. [ 0.235916] RPC: Registered udp transport module. [ 0.235927] RPC: Registered tcp transport module. [ 0.235935] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.236667] Trying to unpack rootfs image as initramfs... [ 1.330981] Freeing initrd memory: 13016K [ 1.331640] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.334159] Initialise system trusted keyrings [ 1.334791] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 1.347491] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.348901] NFS: Registering the id_resolver key type [ 1.348985] Key type id_resolver registered [ 1.348999] Key type id_legacy registered [ 1.349065] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.352545] Key type asymmetric registered [ 1.352567] Asymmetric key parser 'x509' registered [ 1.352738] bounce: pool size: 64 pages [ 1.352817] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.352835] io scheduler noop registered [ 1.352845] io scheduler deadline registered [ 1.353283] io scheduler cfq registered (default) [ 1.353299] io scheduler mq-deadline registered [ 1.353310] io scheduler kyber registered [ 1.384126] imx-sdma 63fb0000.sdma: Direct firmware load for imx/sdma/sdma-imx53.bin failed with error -2 [ 1.384163] imx-sdma 63fb0000.sdma: external firmware not found, using ROM firmware [ 1.469701] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.474579] SuperH (H)SCI(F) driver initialized [ 1.475955] 53fbc000.serial: ttymxc0 at MMIO 0x53fbc000 (irq = 47, base_baud = 4166666) is a IMX [ 2.174850] console [ttymxc0] enabled [ 2.180237] msm_serial: driver initialized [ 2.184645] STMicroelectronics ASC driver initialized [ 2.190909] STM32 USART driver initialized [ 2.219024] brd: module loaded [ 2.235336] loop: module loaded [ 2.242360] ahci-imx 10000000.sata: hwmon0: sensor 'sata_ahci' [ 2.250431] ahci-imx 10000000.sata: SSS flag set, parallel bus scan disabled [ 2.257528] ahci-imx 10000000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.266416] ahci-imx 10000000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc [ 2.276998] scsi host0: ahci-imx [ 2.280977] ata1: SATA max UDMA/133 mmio [mem 0x10000000-0x10000fff] port 0x100 irq 44 [ 2.301368] CAN device driver interface [ 2.306477] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 2.313484] fec 63fec000.ethernet: 63fec000.ethernet supply phy not found, using dummy regulator [ 2.322441] fec 63fec000.ethernet: Linked as a consumer to regulator.0 [ 2.365512] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.371367] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.377463] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 2.384468] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.395573] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 2.403067] usbcore: registered new interface driver pegasus [ 2.408890] usbcore: registered new interface driver asix [ 2.414392] usbcore: registered new interface driver ax88179_178a [ 2.420541] usbcore: registered new interface driver cdc_ether [ 2.426476] usbcore: registered new interface driver smsc75xx [ 2.432289] usbcore: registered new interface driver smsc95xx [ 2.438104] usbcore: registered new interface driver net1080 [ 2.443823] usbcore: registered new interface driver cdc_subset [ 2.449803] usbcore: registered new interface driver zaurus [ 2.455509] usbcore: registered new interface driver cdc_ncm [ 2.463939] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.470495] ehci-pci: EHCI PCI platform driver [ 2.475059] ehci-platform: EHCI generic platform driver [ 2.480608] ehci-orion: EHCI orion driver [ 2.484897] SPEAr-ehci: EHCI SPEAr driver [ 2.489131] ehci-st: EHCI STMicroelectronics driver [ 2.494315] ehci-exynos: EHCI EXYNOS driver [ 2.498707] ehci-atmel: EHCI Atmel driver [ 2.502907] tegra-ehci: Tegra EHCI driver [ 2.507157] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.513413] ohci-pci: OHCI PCI platform driver [ 2.517959] ohci-platform: OHCI generic platform driver [ 2.523513] SPEAr-ohci: OHCI SPEAr driver [ 2.527789] ohci-st: OHCI STMicroelectronics driver [ 2.532928] ohci-atmel: OHCI Atmel driver [ 2.538055] usbcore: registered new interface driver usb-storage [ 2.552356] i2c /dev entries driver [ 2.570246] imx2-wdt 53f98000.wdog: timeout 60 sec (nowayout=0) [ 2.584605] sdhci: Secure Digital Host Controller Interface driver [ 2.590845] sdhci: Copyright(c) Pierre Ossman [ 2.597474] Synopsys Designware Multimedia Card Interface Driver [ 2.605565] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.626598] ata1: SATA link down (SStatus 0 SControl 300) [ 2.632068] ahci-imx 10000000.sata: no device found, disabling link. [ 2.638447] ahci-imx 10000000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 2.647463] mmc0: SDHCI controller on 50004000.esdhc [50004000.esdhc] using ADMA [ 2.660214] sdhci-esdhc-imx 50020000.esdhc: Got CD GPIO [ 2.665502] sdhci-esdhc-imx 50020000.esdhc: Got WP GPIO [ 2.701321] mmc1: SDHCI controller on 50020000.esdhc [50020000.esdhc] using ADMA [ 2.704137] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.708276] mmc0: new high speed SDHC card at address 0001 [ 2.716466] mmcblk0: mmc0:0001 SD16G 14.6 GiB [ 2.735673] usbcore: registered new interface driver usbhid [ 2.741268] usbhid: USB HID core driver [ 2.751672] NET: Registered protocol family 10 [ 2.758159] Segment Routing with IPv6 [ 2.761934] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.768864] NET: Registered protocol family 17 [ 2.773343] can: controller area network core (rev 20170425 abi 9) [ 2.779739] NET: Registered protocol family 29 [ 2.784357] can: raw protocol (rev 20170425) [ 2.788640] can: broadcast manager protocol (rev 20170425 t) [ 2.794328] can: netlink gateway (rev 20170425) max_hops=1 [ 2.800673] Key type dns_resolver registered [ 2.805537] ThumbEE CPU extension supported. [ 2.809845] Registering SWP/SWPB emulation handler [ 2.815639] Loading compiled-in X.509 certificates [ 2.866793] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.881236] hctosys: unable to open rtc device (rtc0) [ 2.892400] Freeing unused kernel memory: 2048K [ 2.897633] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 3.162996] udevd[101]: starting version 3.2.9 [ 3.169207] random: udevd: uninitialized urandom read (16 bytes read) [ 3.176308] random: udevd: uninitialized urandom read (16 bytes read) [ 3.182905] random: udevd: uninitialized urandom read (16 bytes read) [ 3.200415] udevd[101]: specified user 'tss' unknown [ 3.205753] udevd[101]: specified group 'tss' unknown [ 3.218034] udevd[102]: starting eudev-3.2.9 [ 5.082619] usb_phy_generic usbphy-0: usbphy-0 supply vcc not found, using dummy regulator [ 5.107581] usb_phy_generic usbphy-0: Linked as a consumer to regulator.0 [ 5.137097] usb_phy_generic usbphy-1: usbphy-1 supply vcc not found, using dummy regulator [ 5.181688] usb_phy_generic usbphy-1: Linked as a consumer to regulator.0 [ 5.216113] imx_usb 53f80200.usb: Linked as a consumer to regulator.2 [ 5.233059] sgtl5000 1-000a: Linked as a consumer to regulator.1 [ 5.256622] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 5.257048] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 5.263410] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 5.274936] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 5.314578] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 5.334079] hub 1-0:1.0: USB hub found [ 5.341387] hub 1-0:1.0: 1 port detected done Saving random seed: [ 6.459992] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 6.620427] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-829807/environment . /lava-829807/environment / # /lava-829807/bin/lava-test-runner /lava-829807/0 /lava-829807/bin/lava-test-runner /lava-829807/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-829807/0/tests/0_dmesg + cat uuid + UUID=829807_1.5.2.3.1[ 7.269500] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 7.341642] [ 7.407218] [ 7.472282] + set +x [ 7.483198] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-829807/environment / # . /lava-829807/environment/lava-829807/bin/lava-test-runner /lava-829807/1 / # /lava-829807/bin/lava-test-runner /lava-829807/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-829807/1/tests/1_bootrr + cat uuid + UUID=829807_1.5.2.3.5[ 8.025200] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-829807/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-829807/1/../bin/lava-test-case [ 9.112897] /lava-829807/1/../bin/lava-test-case [ 9.175961] /lava-829807/1/../bin/lava-test-case [ 9.212217] + set +x [ 9.239874] / #