connecting to NetworkSerialPort(target=Target(name='imx6ul-pico-hobbit-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4007, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4007 connected to 10.8.254.5 (port 4007) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2017.10.1-00009-gbc5d99d030 #1 Wed Nov 1 17:19:43 CET 2017 Board: Technexion Pico i.MX6UL Board detected i.MX6 UltraLite revision 1.0 mdio_bus: miibus0: probed imx-usb 2184200.usb: USB EHCI 1.00 imx-esdhc 2190000.usdhc: registered as 2190000.usdhc imx-esdhc 2194000.usdhc: registered as 2194000.usdhc netconsole: registered as netconsole-1 malloc space: 0x8fefca40 -> 0x9fdf947f (size 255 MiB) mmc0: detected MMC card version 5.1 mmc0: registered mmc0.boot0 mmc0: registered mmc0.boot1 mmc0: registered mmc0 running /env/bin/init... [?25h Hit m for menu or any other key to stop autoboot: 3 type exit to get to the menu [1;32mbarebox@[1;36mTechnexion Pico i.MX6UL Board:/[0m bootm -v -r /mnt/tftp/829809/tftp-deploy-zemod35b/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/829809/tftp-deploy-zemod35b/dtb/imx6ul-pico-hobbit.dtb /mnt/tftp/829809/tftp-deploy-zemod35b/kernel/zImage [1;32mbarebox@[1;36mTechnexion Pico i.MX6UL Board:/[0m bootm -v -r /mnt/tftp/829809/tftp-deploy-zemod35b/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/829809/tftp-deploy-zemod35b/dtb/imx6ul-pico-hobbit.dtb /mnt/tftp/829809/tftp-deploy-zemod35b/kernel/zImage warning: No MAC address set. Using random address be:7d:b2:11:c3:89 eth1: 100Mbps full duplex link detected T DHCP client bound to address 10.8.254.246 Loading ARM Linux zImage '/mnt/tftp/829809/tftp-deploy-zemod35b/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x82a0e000 no initrd load address, defaulting to 0x83378000 Loaded initrd GZIP compressed '/mnt/tftp/829809/tftp-deploy-zemod35b/ramdisk/ramdisk.cpio.gz' initrd is at 0x83378000-0x8402dff3 Loading devicetree from '/mnt/tftp/829809/tftp-deploy-zemod35b/dtb/imx6ul-pico-hobbit.dtb' mmc0: Cannot find nodepath /soc/aips-bus@02100000/usdhc@02190000, cannot fixup Failed to fixup node in of_partition_fixup+0x1/0x1f8: Invalid argument commandline: console=ttymxc5,115200n8 Starting kernel at 0x82a0e000, initrd at 0x83378000, oftree at 0x8402e000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.265-cip85-rt27 (KernelCI@build-j511216-arm-gcc-10-defconfig-preempt-rt-lvlkj) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP PREEMPT RT Wed Nov 16 01:38:48 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Technexion Pico i.MX6UL Board [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] percpu: Embedded 17 pages/cpu s38944 r8192 d22496 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttymxc5,115200n8 [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 418240K/524288K available (12288K kernel code, 1636K rwdata, 4692K rodata, 2048K init, 406K bss, 40512K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (13280 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1637 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 407 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000018] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000049] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.005827] Console: colour dummy device 80x30 [ 0.006191] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.006216] pid_max: default: 32768 minimum: 301 [ 0.006596] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.006623] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.008474] CPU: Testing write buffer coherency: ok [ 0.009414] /cpus/cpu@0 missing clock-frequency property [ 0.009501] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.011977] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.014922] rcu: Hierarchical SRCU implementation. [ 0.022233] EFI services will not be available. [ 0.022821] smp: Bringing up secondary CPUs ... [ 0.022859] smp: Brought up 1 node, 1 CPU [ 0.022888] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.022909] CPU: All CPU(s) started in SVC mode. [ 0.024728] devtmpfs: initialized [ 0.044363] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.045714] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.045785] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.051170] pinctrl core: initialized pinctrl subsystem [ 0.055918] DMI not present or invalid. [ 0.058369] NET: Registered protocol family 16 [ 0.070618] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.078296] cpuidle: using governor menu [ 0.103119] vdd3p0: supplied by regulator-dummy [ 0.104521] cpu: supplied by regulator-dummy [ 0.106504] vddsoc: supplied by regulator-dummy [ 0.145988] No ATAGs? [ 0.146134] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.146181] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.156620] imx6ul-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e4000 debugfs directory [ 0.157348] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.169973] Serial: AMBA PL011 UART driver [ 0.253588] mxs-dma 1804000.dma-apbh: initialized [ 0.273474] vgaarb: loaded [ 0.276372] SCSI subsystem initialized [ 0.277988] usbcore: registered new interface driver usbfs [ 0.278182] usbcore: registered new interface driver hub [ 0.278341] usbcore: registered new device driver usb [ 0.283003] i2c i2c-0: IMX I2C adapter registered [ 0.283062] i2c i2c-0: can't use DMA, using PIO instead. [ 0.285956] i2c i2c-1: IMX I2C adapter registered [ 0.286016] i2c i2c-1: can't use DMA, using PIO instead. [ 0.288140] i2c i2c-2: IMX I2C adapter registered [ 0.288196] i2c i2c-2: can't use DMA, using PIO instead. [ 0.292274] pps_core: LinuxPPS API ver. 1 registered [ 0.292307] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.292403] PTP clock support registered [ 0.293078] EDAC MC: Ver: 3.0.0 [ 0.302694] clocksource: Switched to clocksource mxc_timer1 [ 0.542511] NET: Registered protocol family 2 [ 0.543420] IP idents hash table entries: 8192 (order: 4, 65536 bytes) [ 0.545747] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 8192 bytes) [ 0.545848] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.545991] TCP bind hash table entries: 4096 (order: 4, 114688 bytes) [ 0.546327] TCP: Hash tables configured (established 4096 bind 4096) [ 0.546632] UDP hash table entries: 256 (order: 2, 16384 bytes) [ 0.546733] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes) [ 0.547331] NET: Registered protocol family 1 [ 0.549099] RPC: Registered named UNIX socket transport module. [ 0.549139] RPC: Registered udp transport module. [ 0.549162] RPC: Registered tcp transport module. [ 0.549183] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.550544] Trying to unpack rootfs image as initramfs... [ 3.401479] Freeing initrd memory: 13016K [ 3.407108] Initialise system trusted keyrings [ 3.407987] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 3.438824] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.441798] NFS: Registering the id_resolver key type [ 3.442228] Key type id_resolver registered [ 3.442258] Key type id_legacy registered [ 3.442403] ntfs: driver 2.1.32 [Flags: R/O]. [ 3.451004] Key type asymmetric registered [ 3.451047] Asymmetric key parser 'x509' registered [ 3.451219] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 3.451253] io scheduler noop registered [ 3.451279] io scheduler deadline registered [ 3.452263] io scheduler cfq registered (default) [ 3.452296] io scheduler mq-deadline registered [ 3.452322] io scheduler kyber registered [ 3.516103] pwm-backlight backlight: backlight supply power not found, using dummy regulator [ 3.516388] pwm-backlight backlight: Linked as a consumer to regulator.0 [ 3.516695] pwm-backlight backlight: Dropping the link to regulator.0 [ 3.547998] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 3.548061] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 3.768572] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.780227] SuperH (H)SCI(F) driver initialized [ 3.783793] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60, base_baud = 5000000) is a IMX [ 3.786680] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 61, base_baud = 5000000) is a IMX [ 4.531683] console [ttymxc5] enabled [ 4.539093] msm_serial: driver initialized [ 4.544022] STMicroelectronics ASC driver initialized [ 4.553229] STM32 USART driver initialized [ 4.621400] brd: module loaded [ 4.653784] loop: module loaded [ 4.698968] CAN device driver interface [ 4.706236] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 4.714861] fec 20b4000.ethernet: 20b4000.ethernet supply phy not found, using dummy regulator [ 4.723787] fec 20b4000.ethernet: Linked as a consumer to regulator.0 [ 4.734123] pps pps0: new PPS source ptp0 [ 4.803697] fec 20b4000.ethernet eth0: registered PHC device 0 [ 4.813731] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.819600] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.825861] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 4.832931] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.855400] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 4.863161] usbcore: registered new interface driver pegasus [ 4.869053] usbcore: registered new interface driver asix [ 4.874651] usbcore: registered new interface driver ax88179_178a [ 4.880892] usbcore: registered new interface driver cdc_ether [ 4.886956] usbcore: registered new interface driver smsc75xx [ 4.892984] usbcore: registered new interface driver smsc95xx [ 4.898885] usbcore: registered new interface driver net1080 [ 4.904744] usbcore: registered new interface driver cdc_subset [ 4.910812] usbcore: registered new interface driver zaurus [ 4.916714] usbcore: registered new interface driver cdc_ncm [ 4.930745] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.937331] ehci-pci: EHCI PCI platform driver [ 4.942019] ehci-platform: EHCI generic platform driver [ 4.948147] ehci-orion: EHCI orion driver [ 4.953036] SPEAr-ehci: EHCI SPEAr driver [ 4.957659] ehci-st: EHCI STMicroelectronics driver [ 4.963347] ehci-exynos: EHCI EXYNOS driver [ 4.968129] ehci-atmel: EHCI Atmel driver [ 4.972913] tegra-ehci: Tegra EHCI driver [ 4.977595] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.983887] ohci-pci: OHCI PCI platform driver [ 4.988553] ohci-platform: OHCI generic platform driver [ 4.994639] SPEAr-ohci: OHCI SPEAr driver [ 4.999259] ohci-st: OHCI STMicroelectronics driver [ 5.004784] ohci-atmel: OHCI Atmel driver [ 5.011668] usbcore: registered new interface driver usb-storage [ 5.024264] imx_usb 2184000.usb: Linked as a consumer to regulator.7 [ 5.040863] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 5.049339] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 5.060906] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 5.065921] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 5.102859] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 5.110982] hub 1-0:1.0: USB hub found [ 5.114912] hub 1-0:1.0: 1 port detected [ 5.140199] i2c /dev entries driver [ 5.188037] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 5.209162] sdhci: Secure Digital Host Controller Interface driver [ 5.215393] sdhci: Copyright(c) Pierre Ossman [ 5.226247] Synopsys Designware Multimedia Card Interface Driver [ 5.238169] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.281480] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 5.291704] sdhci-esdhc-imx 2194000.usdhc: Linked as a consumer to regulator.8 [ 5.346031] mmc0: new DDR MMC card at address 0001 [ 5.354016] mmcblk0: mmc0:0001 M62704 3.56 GiB [ 5.360145] mmcblk0boot0: mmc0:0001 M62704 partition 1 2.00 MiB [ 5.367701] mmcblk0boot1: mmc0:0001 M62704 partition 2 2.00 MiB [ 5.374282] mmcblk0rpmb: mmc0:0001 M62704 partition 3 512 KiB, chardev (235:0) [ 5.384561] mmcblk0: p1 p2 [ 5.555638] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 5.585852] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 5.593508] usbcore: registered new interface driver usbhid [ 5.599113] usbhid: USB HID core driver [ 5.604828] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 5.624839] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 5.635287] NET: Registered protocol family 10 [ 5.645997] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 5.651621] Segment Routing with IPv6 [ 5.655684] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.665526] NET: Registered protocol family 17 [ 5.670064] can: controller area network core (rev 20170425 abi 9) [ 5.676739] NET: Registered protocol family 29 [ 5.681248] can: raw protocol (rev 20170425) [ 5.685570] can: broadcast manager protocol (rev 20170425 t) [ 5.691312] can: netlink gateway (rev 20170425) max_hops=1 [ 5.699464] Key type dns_resolver registered [ 5.708912] cpu cpu0: Linked as a consumer to regulator.2 [ 5.714894] cpu cpu0: Linked as a consumer to regulator.3 [ 5.725213] ThumbEE CPU extension supported. [ 5.729770] Registering SWP/SWPB emulation handler [ 5.737243] Loading compiled-in X.509 certificates [ 5.797361] mmc1: new high speed SDIO card at address 0001 [ 5.832501] pwm-backlight backlight: backlight supply power not found, using dummy regulator [ 5.841194] pwm-backlight backlight: Linked as a consumer to regulator.0 [ 5.848166] pwm-backlight backlight: Dropping the link to regulator.0 [ 5.861742] imx_thermal tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 5.874236] pwm-backlight backlight: backlight supply power not found, using dummy regulator [ 5.883086] pwm-backlight backlight: Linked as a consumer to regulator.0 [ 5.890041] pwm-backlight backlight: Dropping the link to regulator.0 [ 5.900444] pwm-backlight backlight: backlight supply power not found, using dummy regulator [ 5.909259] pwm-backlight backlight: Linked as a consumer to regulator.0 [ 5.916280] pwm-backlight backlight: Dropping the link to regulator.0 [ 5.926471] hctosys: unable to open rtc device (rtc0) [ 5.942060] Freeing unused kernel memory: 2048K [ 5.947162] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 6.324484] udevd[101]: starting version 3.2.9 [ 6.331361] random: udevd: uninitialized urandom read (16 bytes read) [ 6.338713] random: udevd: uninitialized urandom read (16 bytes read) [ 6.345672] random: udevd: uninitialized urandom read (16 bytes read) [ 6.372579] udevd[101]: specified user 'tss' unknown [ 6.378224] udevd[101]: specified group 'tss' unknown [ 6.392629] udevd[102]: starting eudev-3.2.9 [ 9.234510] flexcan 2090000.flexcan: 2090000.flexcan supply xceiver not found, using dummy regulator [ 9.303286] flexcan 2090000.flexcan: Linked as a consumer to regulator.0 [ 9.311761] flexcan 2090000.flexcan: device registered (reg_base=(ptrval), irq=22) [ 9.430529] pwm-backlight backlight: backlight supply power not found, using dummy regulator [ 9.433911] flexcan 2094000.flexcan: 2094000.flexcan supply xceiver not found, using dummy regulator [ 9.434116] flexcan 2094000.flexcan: Linked as a consumer to regulator.0 [ 9.435834] flexcan 2094000.flexcan: device registered (reg_base=(ptrval), irq=23) [ 9.638667] pwm-backlight backlight: Linked as a consumer to regulator.0 [ 9.657140] pwm-backlight backlight: Dropping the link to regulator.0 [ 9.689605] pwm-backlight backlight: backlight supply power not found, using dummy regulator [ 9.728860] pwm-backlight backlight: Linked as a consumer to regulator.0 [ 9.783264] pwm-backlight backlight: Dropping the link to regulator.0 [ 10.121881] sgtl5000 1-000a: Linked as a consumer to regulator.4 [ 10.181998] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.183986] sgtl5000 1-000a: Linked as a consumer to regulator.5 [ 10.212933] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 10.223412] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 10.345767] pwm-backlight backlight: backlight supply power not found, using dummy regulator [ 10.345996] pwm-backlight backlight: Linked as a consumer to regulator.0 [ 10.346227] pwm-backlight backlight: Dropping the link to regulator.0 [ 10.554012] [drm] No driver support for vblank timestamp query. [ 10.560136] OF: graph: no port node found in /soc/aips-bus@2100000/lcdif@21c8000 [ 10.610067] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 10.660495] mxsfb 21c8000.lcdif: Failed to create outputs [ 11.333844] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 11.340751] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 11.349422] cfg80211: failed to load regulatory.db [ 11.489432] pwm-backlight backlight: backlight supply power not found, using dummy regulator [ 11.507937] pwm-backlight backlight: Linked as a consumer to regulator.0 [ 11.550587] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430a0-sdio for chip BCM43430/0 [ 11.575494] pwm-backlight backlight: Dropping the link to regulator.0 [ 11.606362] pwm-backlight backlight: backlight supply power not found, using dummy regulator [ 11.648314] pwm-backlight backlight: Linked as a consumer to regulator.0 [ 11.669110] pwm-backlight backlight: Dropping the link to regulator.0 [ 11.689252] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430a0-sdio.bin failed with error -2 [ 12.729391] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 done Saving random seed: [ 13.129926] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 13.350459] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-829809/environment . /lava-829809/environment / # /lava-829809/bin/lava-test-runner /lava-829809/0 /lava-829809/bin/lava-test-runner /lava-829809/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-829809/0/tests/0_dmesg + cat uuid + UUID=829809_1.5.2.3.1[ 14.088316] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 14.187192] [ 14.275803] [ 14.364585] + set +x [ 14.376706] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-829809/environment / # . /lava-829809/environment/lava-829809/bin/lava-test-runner /lava-829809/1 / # /lava-829809/bin/lava-test-runner /lava-829809/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-829809/1/tests/1_bootrr + cat uuid + UUID=829809_1.5.2.3.5[ 14.958839] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-829809/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-829809/1/../bin/lava-test-case [ 16.070650] /lava-829809/1/../bin/lava-test-case [ 16.154746] /lava-829809/1/../bin/lava-test-case [ 16.203072] + set +x [ 16.238873] / #